Will show TV with room antenna

How to watch TV without an antenna

TV today, along with the Internet, is source of information. In addition to news, you can watch entertainment shows, TV series, sports and more. But many users do not want to buy an over-the-air antenna for such leisure. In the material, we will consider how to watch TV without an antenna.

IPTV

Today it is a very convenient way. There is no need to buy additional equipment if the TV has a Smart TV. All you need to do is connect an Ethernet cable or Wi-Fi adapter. And start implementing

But first, choose a provider, register on the site, purchase a package with TV channels and follow the instructions.

NOTE. To watch interactive TV, you need a good internet speed. Otherwise, freezes cannot be avoided.

  • With a set-top box provided by the provider.
  • Having configured the router via a wireless connection.
  • Smart TV app.
  • Special applications.

If viewing is carried out through a set-top box, then the connection to the TV can be carried out via HDMI or “tulips”. On the TV, you need to select the correct input (HDMI 1, HDMI 2) or switch to AV.

IMPORTANT. Modern TV models immediately display the ports to which the devices are connected. They either become brighter in the device menu, or have higher priority. You must first turn on the prefix.

Then follow the instructions of the prefix. In most cases, you need to enter the login and password from the provider’s website and the packages will be configured automatically.

When choosing an application in Smart TV, it is enough to first connect to the Internet (without it it is impossible to enter this service), download the application, enter a username and password. Enjoy watching. Such a simple principle.

How to catch channels without an antenna on a TV

Now the matter is small. It remains to find the necessary channels. IPTV already has a built-in list of TV channels. There is no need to search or configure anything. Using the instructions of the provider, you need to do the following:

IMPORTANT. Advice for STB owners. add channels to “Favorites”. In order not to look for your favorite among hundreds of TV channels. So, it is much easier to turn on the desired program and enjoy watching.

  • Go to the menu. Select “Install”.
  • Start automatic TV channel search.

After a simple search, there will be 30 channels in excellent quality and for free! The only drawback is that the channels are not added to the “Favorites” and you cannot move them.

How to watch TV without antenna and cable

In the previous paragraph, the question was resolved in what ways you can watch TV without an antenna and cable. Now let’s get down to implementation.

Digital tuner

It differs from the first only in the number of TV channels and without a monthly fee. We buy a tuner, indoor antenna and connect to this device. HDMI cable. to the TV. Getting started setting up.

IMPORTANT. To tune the indoor antenna correctly, you need to select the manual mode and frequency. The list of frequencies is posted on the RTRS website.

Smart TV app

Similar to IPTV, only directly on the TV. Some TV channels develop applications for TVs and allow you to watch online. All you need is internet.

Can the TV work without an antenna?

There are many reasons for users to refuse an antenna cable. Owners of analog TV “suffer” from poor picture quality and poor sound; cable TV subscribers are limited by the number and variety of channels. And they pay for it. I would like to give up both the first and second options. But how to watch TV without an antenna?

Having asked this question in the last century, one could easily end up in a psychiatric hospital. After all, “iron structures” then stood on every house, if not in every apartment. In large cities, you can still see collective antennas tuned to the tower. In most cases, their use is already a “formality”. Either stand for beauty or apply to digital TV.

Today, the owners of this technique can do without such structures. If you need a TV purely for entertainment: watch online movies, the weather, play with friends. then this question is not worth asking. And for those who want to watch TV without an antenna, there are such ways:

  • IPTV.
  • TV channel applications in Smart TV.
  • Digital tuner.

NOTE. IPTV. access to TV channels without an antenna and cable. Large selection of providers, TV channels for every taste and optimal prices.

Is your internet speed slow? Or do wires create chaos in the apartment? The option associated with the purchase of a digital tuner is then preferable. To do this, you need to purchase an antenna. Only it will be connected to the tuner. There are also built-in receivers in modern TV models. But it won’t work without an antenna.

show, room, antenna

Samsung 4K TV | Indoor Antenna Setup

IMPORTANT. To summarize, there are 2 options for watching television. the Internet and a digital receiver. Each has its own advantages and disadvantages.

Connection diagram of the set-top box

Connect the TV to a digital set-top box via video and audio cables.
Connect the digital receiver to the antenna via the antenna cable.
Turn on autosearch of channels. the TV will tune to the corresponding digital terrestrial
channel.
When tuning to a channel in manual mode, you must specify the channel frequency (for example: 35 TV channel, 586 MHz). You can find out the channel number and its frequency on the rtrs.rf website.

READ  How to connect 2 TVs through a set-top box

The entire multiplex occupies the bandwidth of one television channel.
Most digital TVs (and set-top boxes) have a built-in signal level and quality indicator, which will optimally tune your antenna to receive digital
terrestrial signal (see the operating instructions for the TV).

To receive digital terrestrial television at a considerable distance from the transmitting television center, it is recommended to use individual outdoor antennas of the decimeter range with
high gain by placing them at the highest possible height.

An indoor TV antenna for receiving DVB-T2 television is always a compromise between appearance and quality of the received signal. It’s not even about quality, but about the ability to watch digital TV using an internal catcher.

Indoor antennas are characterized by a laconic appearance and minimal installation effort, but in order for them to be useful, several conditions must be met simultaneously. The correct operation of the device indoors depends on:

  • distance to the nearest transmitter;
  • the presence and type of built-in amplifier;
  • the type and thickness of the walls of the building;
  • the size of the windows, their location in relation to the TV tower;
  • type of window glass (technology of their manufacture);
  • quantity, dimensions, arrangement of furniture in the room.

Stable reception of a TV signal indoors can be disrupted by a change in any of these factors or even by the usual use of household appliances due to their close proximity (direct contact) to the radio wave receiver.

So, you know the parameters, as well as the specifics of the place where you expect to catch a TV signal (cable length, number of consumers) and you want to have it from a simple indoor antenna? It remains to get the right model.

The transition to digital broadcasting in Russia is at its apogee, but its pace is somewhat exaggerated. Many families still watch, or have to watch, programs in their usual analog quality. In places where there are TV towers or repeaters, indoor TV antennas are not new. But is your old indoor antenna suitable for digital signal? To receive digital broadcasting without installing an outdoor signal receiver, you need your indoor receiver to catch decimeter waves or be broadband.

A selection of recommended TV antennas for DVB-T2

It is difficult to answer the question: will digital television with a room antenna be shown without purchasing it and trying it in action in local conditions. You must understand whether you need a powerful indoor antenna for DVB-T2 with an amplifier or the signal in your house is so strong that a passive detector is suitable.

The purchased device, even if it is internal, must have a radiation pattern that is at least slightly different from the geometric circle.

Wave receivers, which have a chance of success, have one thing in common: they are highly directional and receive a signal well from the direction they are looking, trying to ignore extraneous signals. The narrow-beam model is the first step to good digital TV reception in a room.

By this time, the domestic buyer has already formed a certain rating of models in the ratio “appearance-cost-functionality”, which will help you choose an indoor antenna for a TV.

The best indoor antennas with amplifier for TV:

  • REMO BAS-5320-USB Inter 2.0 is an all-wave active room model, confidently “catches a digital” and an analog signal. The amplifier is powered by an adapter or via USB. The device has an innovative design, its body is durable and ergonomic;
  • REMO BAS-5310USB HORIZON. a device of this brand is designed for areas with very good reception. Has a minimalistic appearance, due to which it will successfully fit into a single composition with any TV and tuner, can be fixed directly on the TV. Type. active;
  • DENN DAA210. this active internal design combines many things: compactness, active method of receiving radio and terrestrial TV signals (T2 and analog), built-in noise suppression device, affordable cost;
  • VIVANCO is a family of active and passive models for the home, which has shown itself well in digital and analog reception at various frequencies.

Recently, panel antennas are gaining popularity. They have a compact design housed in a flat body. For a relatively low price, you get a universal receiving device: it is suitable for use both outdoors and indoors. Models of this design provide good TV signal reception.

How to connect an indoor antenna to a TV

For the lucky ones, whose TV can independently receive T2 TV. just insert the plug into the TV socket. What and how to set up in the menu? You need to select “digital signal” in the TV menu. Indoor antennas with an amplifier must be connected to the mains, do not forget to connect the adapter to the outlet before starting Auto Search.

Where and how best to install

When dealing with digital terrestrial television, you need to remember the basic principles of its reception:

  • It is necessary to orient the TV antenna in the direction of the TV transmitter. Almost all designs designed for reception of the UHF band, where digital TV broadcasts, are most sensitive to reception from one narrow band. There are omni-directional designs, but they are generally weak and need an amplifier.
  • The digital signal on the UHF is confidently received only within the line of sight: waves of this length propagate without bending around obstacles.
  • Many objects are opaque for the UHF signal (from hills and forests to capital buildings).

Therefore, the indoor antenna must be installed as follows:

  • It should be oriented towards the TV tower. The more accurate the better.
  • There should be no major obstacles between the receiver and the repeater. These include even the walls of the house. Therefore, the indoor antenna should be positioned against the wall on the side of the repeater. Glass is more radiotransparent than brick or concrete. The best place for a room option is a window opening. Ideally, if the design allows, it should be installed outside the house.
  • The higher the antenna is located for receiving digital TV, the higher the signal level and the longer the distance at which it can be caught. Therefore, it should be placed as high as possible. Ideally on the top of the window frame. In this case, the design of the windows must be taken into account: plastic frames have a metal frame, which partially screens the signal.

To set up a home antenna on your TV, you need a Honor and signal strength. It can be determined using the appropriate scale on a digital TV or on a set-top box (receiver) if an old TV receiver is used.

READ  How to set up a selenga set-top box on a TV

Is an indoor antenna convenient? Very! Sucks!

  • If the signal level in the room is high, the location of the TV antenna is not particularly important. If there are a few kilometers to the repeater, and the transmitter power is high, federal 20 channels can also be received on a structure fixed to the wall not across, but along the wave.
  • If the level is medium, the antenna must be carefully oriented towards the repeater.
  • If the level is weak, it is better to use an active design or purchase an external amplifier.

All-wave indoor antenna MV-DMV

There is an opinion that all-wave broadband detectors are useless for “digital”. In fact, devices of this type often demonstrate the opposite, because the problem lies not in their design (the main lobe of their radiation pattern is almost round), but much more often in the amplifiers with which they are equipped. without shielding, with a high noise level.

In some cases, a wide radius of capture of radio waves by an indoor broadband receiver can have a negative effect: the unwanted signals received by it will “clog” the DVB-T2 signal.

All-wave (MV-UHF) indoor antenna viva

A high-quality all-wave receiver has a chance to prove itself in a dense urban area. Reflected TV signals often occur within neighborhoods, and the correct orientation of the directional model can be difficult.

The all-wave indoor television antenna is designed to receive all terrestrial television programs, both for analog broadcasting and digital.

Gain

The gain is an extremely useful and important parameter for evaluating the performance of a collecting structure. This is not the gain of the amplifier, but the intrinsic gain of the antenna with precise directivity to the transmitter.

To enhance the room model of the receiver, it can be retrofitted with a device to increase its performance. Many models that the radio market offers are with an already installed amplifier, but it can also be purchased separately, for the room antenna that you already have.

Installing an amplifier that is too powerful paradoxically degrades reception. The amplification will affect not only the useful signal, but also any interference in the receiving area. The optimal solution can be considered the purchase of an amplifier that has a voltage regulator on the power supply. So you can independently control and delicately adjust the signal gain level.

Still, common practice dictates that for DVB-T2, the use of amplifiers in combination with indoor wave receivers is best avoided. Similar to the choice of antenna, it all depends on the power and distance from the transmitter. For a tower located at a distance of up to 30 km or more, especially in the case of a low power of their output signal, amplification is most likely required. Often imperfect conditions on the ground do not contribute to good reception (dense buildings, forest belt) and then the output can be the reception of the reflected signal.In this case, the amplifier can really save the situation, increasing the chances of successful reception.

In order to watch twenty free digital channels in good quality, you need an antenna. It is impossible to catch terrestrial channels without an antenna. In most cases, a simple indoor antenna will work. Next, we will analyze how to properly connect the antenna to a TV or set-top box and, if necessary, configure it.

How to connect to a set-top box

If you don’t want to change your not too new, but properly working TV, then you don’t need to. Purchase a digital receiver to the TV and connect it correctly.

Carefully unpack the TV antenna, place it on the window that looks towards the TV tower. Before that, you inserted the plug into the corresponding socket on the TV. Now your task is to insert it not into the TV, but into a brand new, recently purchased digital terrestrial tuner. The processed TV signal from the audio-video output of the tuner is fed to the audio-video output of the T2 receiver. If you have a passive indoor antenna, then the connection ends here. You can go to search and tune TV channels.

Do Indoor TV Aerials / Antennas work on Digital HD Televisions?

When connecting a TV antenna with an amplifier, be sure to connect the amplifier adapter to the mains. This must be done after all cable connections. A voltage of 5 volts can be applied to the amplifying microcircuit directly from the receiver and no additional wire is needed. After that, you need to activate the power directly from the set-top box menu. Go to the menu, to the settings section and find the item “5v power supply”, select “ON”, and click “OK”.

UHF decimeter indoor antenna

The broadcast of the “digit” is conducted with a radio wave length from 10 cm to 100 cm. A device whose instructions indicate that it is intended for the UHF band will be able to receive digital channels.

Outdoor devices of this type have an elongated design with a large number of crossbars (directors), due to which the signal reaching the vibrator is noticeably amplified. The radiation pattern of this receiver has a narrow and elongated main lobe.

The indoor UHF antenna, being a compact device, nevertheless has an identical structure, but with fewer crossbars, which can be hidden under a plastic shell in order to give the structure an original look.

All-wave indoor antenna MV-DMV

There is an opinion that all-wave broadband detectors are useless for “digital”. In fact, devices of this type often demonstrate the opposite, because the problem lies not in their very design (the main lobe of their radiation pattern is almost round), but much more often in the amplifiers with which they are equipped. without shielding, with a high noise level.

In some cases, a wide radius of capture of radio waves by an indoor broadband receiver can have a negative effect: the unwanted signals received by it will “clog” the DVB-T2 signal.

A high-quality all-wave receiver has a chance to prove itself in a dense urban area. Reflected TV signals often occur within neighborhoods, and the correct orientation of the directional model can be difficult.

The all-wave indoor television antenna is designed to receive all terrestrial television programs, both for analog broadcasting and digital.

How to connect to a set-top box

If you don’t want to change your not too new, but properly working TV, then you don’t need to. Buy a digital receiver to the TV and connect it correctly.

READ  How to strengthen an antenna for a TV with your own hands

Carefully unpack the TV antenna, place it on the window that looks towards the TV tower. Before that, you inserted the plug into the corresponding socket on the TV. Now your task is to insert it not into the TV, but into a brand new, recently purchased digital terrestrial tuner. The processed TV signal from the audio-video output of the tuner is fed to the audio-video output of the T2 receiver. If you have a passive indoor antenna, then the connection ends here. You can go to the search and tuning of TV channels.

When connecting a TV antenna with an amplifier, be sure to connect the amplifier adapter to the mains. This must be done after all cable connections. A voltage of 5 volts can be applied to the amplifying microcircuit directly from the receiver and no additional wire is needed. After that, you need to activate the power directly from the set-top box menu. Go to the menu, to the settings section and find the item “5v power supply”, select “ON”, and click “OK”.

How to connect an indoor antenna to a TV

For the lucky ones, whose TV can independently receive T2 TV. just insert the plug into the TV socket. What and how to set up in the menu? You need to select “digital signal” in the TV menu. Indoor antennas with an amplifier must be connected to the mains, do not forget to connect the adapter to the outlet before starting Auto Search.

How to connect to a set-top box

If you don’t want to change your not too new, but properly working TV, then you don’t need to. Purchase a digital receiver to the TV and connect it correctly.

Carefully unpack the TV antenna, place it on the window that looks towards the TV tower. Before that, you inserted the plug into the corresponding socket on the TV. Now your task is to insert it not into the TV, but into a brand new, recently purchased digital terrestrial tuner. The processed TV signal from the audio-video output of the tuner is fed to the audio-video output of the T2 receiver. If you have a passive indoor antenna, then the connection ends here. You can go to search and tune TV channels.

When connecting a TV antenna with an amplifier, be sure to connect the amplifier adapter to the mains. This must be done after all cable connections. A voltage of 5 volts can be applied to the amplifying microcircuit directly from the receiver and no additional wire is needed. After that, you need to activate the power directly from the set-top box menu. Go to the menu, to the settings section and find the item “5v power supply”, select “ON”, and click “OK”.

How to connect a TV antenna

Most indoor TV antenna models are supplied with a cable and antenna connector. Developers design their products more likely for ideal reception conditions, so the cable for factory models has a limited length (up to 1.5 m) and not the best quality. In the case of digital reception, you will hardly be able to create a spectacular picture: a TV, and a compact antenna flaunts next to it or on it. If your TV is not installed near a window, on which it is advisable to place a TV-signal receiver so that it can better catch the “digital”, then the cable will have to be added. This is plus a few meters of extension cable and one additional connection, and, as a result, some signal attenuation.

TV antenna location

In order for the indoor wave receiver to perform its function properly, several conditions must be met. Indoor TV antenna is a good solution only for those who have no more than 20 kilometers from the TV tower to their home. Compared to external antennas, indoor antennas are relatively weak devices. For reception to be acceptable, you need to look well for potential installation locations in your home where it will receive the signal with confidence.

First of all, find the location of the nearest transmitter. this information can be obtained by searching on the DTV coverage map. Next, place the antenna in the direction of the nearest repeater. The optimum reception quality is usually achieved at the window, at the maximum height. The internal structure is most vulnerable to barriers: tall buildings, trees or elevations, so in a private house it will be justified to place it as high as possible, for example, in the attic.

Connection

To connect an indoor antenna to the TV, you need a coaxial cable with RF plug.

All indoor models are supplied with it during production, but often its length is insufficient to place the TV antenna in the most reliable reception area. Therefore, it is often necessary to use an additional cable either to extend the existing one, or, if an external individual antenna is used, to connect.

show, room, antenna

When choosing a cable, the following factors must be borne in mind:

  • The shorter it is, the better. Even the highest quality coaxial wire has non-zero resistance, which grows with every meter. If the cable is too long, its internal resistance can be so significant that a signal that allows you to clearly show TV programs will simply not be received.
  • Almost all brands of cable have a characteristic impedance of 75 ohms. However, there are a number of additional parameters related to signal quality. For example, RG-59 cable is relatively cheap, but its signal attenuation is too high.
  • to a digital TV receiver working with the DVB-T2 standard;
  • to a receiver (set-top box, tuner) capable of converting a digital signal into audio and video.

Connection is made to the antenna input of a TV or set-top box using a plug of the appropriate shape.

In cases where the TV is too old, and the set-top box has a high-frequency modulator, it is possible to connect it to the TV through the antenna input. In this case, you will also need a coaxial cable.