Sony vaio laptop does not start

Windows Recovery on SONY Laptops

The information in this article only applies to SONY VAIO laptops, all-in-ones and tablet PCs with Windows pre-installed by the manufacturer.

VAIO Care software and what it does

Let’s take a look at the process of restoring a computer to its factory state using VAIO Care:

First of all, connect the charger to your computer.

one. If your laptop (monoblock) has the ASSIST key:

While the computer is off, press the ASSIST key to launch the VAIO Care (Rescue mode).

If your computer does not have the ASSIST key:

Turn on the computer normally, during startup (the VAIO logo is displayed) press the.

After the VAIO Care software has loaded, the following window appears (depending on the model, the version of the supplied software, and the appearance of the windows may differ):

Click the “Start Recovery” button, then select “System Restore”.

If you have not previously backed up with VAIO Care, this window will display a single dot corresponding to the state of your system at the time you purchased your computer. Select this point and click “Next”

Sony VAIO Some troubleshooting steps to help you if your VAIO will not power on

Recovery involves formatting the system drive (C drive), make sure all valuable files are backed up.

Click the “Finish” button to start the recovery process.

The recovery process can take up to 1 hour. Do not disconnect the external power supply or remove the battery.

The computer will restart several times. When the restore process is complete, adjust your Windows regional settings.

The VAIO Care software also works with recovery DVDs if provided by the manufacturer.

It is impossible to recover the OS if the special partition has been deleted or damaged. In this case, you need to contact the service center.

If the VAIO Care (Rescue Mode) screen is displayed for five minutes and no operations are performed, the VAIO computer automatically turns off.

System recovery sony vaio

service In almost all modern laptops, part of the disk space is occupied by the recovery area of ​​the operating system in emergency situations that may arise as a result of serious failures in the operating system, or inept and careless actions of the laptop user. In laptops from SONY. model line VAIO. to enter the BIOS and access the laptop recovery menu, there is a separate ASSIST button. If your SONY laptop does not start, then it is the recovery menu that can help restore the system to work. Let’s consider this issue in more detail.

menu With the laptop turned off, hold down the ASSIST button for a few seconds, usually located above the laptop keyboard. The recovery menu (the so-called recovery menu) will appear on the display with the following items:

open 1. Start troubleshooting (Recovery). This item is used to update the laptop software, or to restore its operation by means of recovery from the manufacturer, for which a separate area of ​​disk space is provided (this area contains service information and configuration data to restore the laptop’s system to work).

login 2. Launch from media (USB device / optical disc). You will need this item in cases when you have at your disposal a bootable disk (LIVE CD), or a flash drive, with which you can boot the computer and restore the system (unlike the first item, the boot does not take place from the hard disk installed in the computer, but from these media).

run 3. Contact and technical support.

BIOS 4. Run BIOS settings. Through this item you can enter the basic input-output system BIOS to change some settings, in particular, you may need this when trying to restore the system using a bootable LIVE CD (item 2). In order for the laptop to start booting not from the hard disk, but from the LIVE CD, the BIOS parameters must have the following values: Boot Mode. Legacy (Boot tab), External Device Boot. Enable (Boot tab), Boot Priority. External Device (at the top of the list of boot devices in the Boot tab).

launch 5. Launch from the network. Used to recover laptop system remotely.

Sony Vaio. System recovery: detailed instructions

The Sony Vaio series of laptops is a rather specific line of computer devices, if not unique. The fact is that in Sony Vaio laptop models, system recovery can be carried out even without an installation or boot disk, the use of which is provided in most cases. However, not all owners of these devices fully understand how to perform such actions. As it turns out, everything is quite simple. This does not require any special knowledge.

Sony Vaio. System recovery: what you need to know initially

The very first and foremost is that most models of this range are equipped with a special Assist button directly on the keyboard panel, which activates the call of the corresponding menu.

If there is no such key, in Sony Vaio laptops, Windows 7 or any other OS can be restored by accessing the main menu through a special hard disk partition. Only in this case, you should use the function keys (F12, F11, F10 or F9) when turning off the device. Which button is intended to be accessed depends solely on the model. As a last resort, you can just read the technical documentation.

So, we assume that when you press the keys or the button, access to the main menu is made. System recovery on a Sony Vaio laptop can be done in several main ways.

Sony Vaio won’t turn on (Fixed) / Static electricity problem solved

Normal recovery, diagnostics, or factory reset can be used. Depending on the degree of damage to the OS or its system components, the desired section is selected.

And if everything looks simple enough with the usual rollback, then you will have to work a little to return to the original settings.

Reset (restore) Sony VAIO to factory settings after upgrading to Windows 8.1

After updating the operating system on a Sony VAIO laptop from Windows 8 to Windows 8.1, the laptop cannot be reset to factory settings. When trying to reset, it gives an error: “The required disk partition is missing” or “The partition is locked.” An alternative way to restore factory settings helped:

[1] Press the ASSIST button while your VAIO computer is turned off.

The VAIO Care Rescue Mode screen appears.

[2] Select Recover or maintain your system.

The language selection window will appear. Choose your language.

A window for selecting a restore option will appear

[3] Select Troubleshoot

[4] Select Recovery and maintenance.

A window for selecting an operating system for recovery will appear (in our case, it will be Windows 8.1):

[5] Choose Windows 8 (Windows 8.1)

[6] Select Start recovery wizard.

A window will appear where we are warned that all files will be erased and asked if we are sure that we want to start the recovery process.

[8] We put a daw in front of the inscription “Yes, I’m sure” (“Yes, I’m sure.”). Then the button [Start recovery] is activated. We press this button, a progress bar will appear, which will display the process of restoring the laptop to factory settings.

After the end of the recovery process, the “Recovery complete” window will appear.

Click the [Restart] button.

After rebooting, the laptop will be ready to work with a fresh (rebuilt) system.

READ  How To Connect Laptop To Smart TV

How to restore the system and configure drivers in Sony Vaio laptops

The Sony Vaio series notebooks differ from other brands in their individuality, since the market of this company was initially focused on the American user. Having its own unique recovery system, users of these laptops always have the opportunity to quickly and conveniently return the operating system to working condition with the ability to save any information.

The method of system recovery in Sony laptops is VAIO Care technology, which is a set of software that allows the user to manage the entire system. VAIO Care technology is divided into two types:

  • A set of programs installed in the Windows operating system, which is launched either through the “Start. All Programs. VAIO Care” menu, or by a special button on the keyboard “Assist”. At startup, the main window will open, where you can perform almost all key system operations that are located in the Windows control panel. Here is a section for optimizing the system, by cleaning the registry and media for spent system files, as well as defragmenting it. There is a separate section for system recovery, where you can return Windows to the basic settings, roll back the system to the time of a certain date, or remove the necessary system drivers with updates. It is important to know that basic drivers for sony laptops are installed along with the VAIO Care version for Windows on the installation disc or from the manufacturer’s official website;
  • The VAIO Care version that boots from MS DOS. In fact, this service is identical in functionality to the recovery environment, which is launched with the F10 button. Both utilities are similar to the so-called “hidden partitions” of recovery on other brands of notebook computers. You must press the Assist key immediately after turning on the computer to launch the VAIO recovery center menu. Here, select the desired language for the keyboard layout, and then click the “Diagnostics” item. In the next window, select either “Restore”. in this case, user data will not be affected, or “Reset the computer to its original state”. all data on the C drive will be deleted. The final stage will be waiting for an action and logging into the system;
  • Recovery environment using the F10 button, which must be pressed immediately after turning on the Sony Vaio (important. in some models, you must press F10 together with the Fn key). As already mentioned, this set of utilities is practically equivalent to VAIO Care technology, since the result and recovery methods are similar here. The choice between saving the data or completely restoring it to the factory settings of the system with the subsequent erasure of the information is offered, as well as technical questions about the necessary partitions on the hard disk. Differences are only in the interface and some minor functionality.

For a “clean” installation of Windows, when it is impossible to turn on and log on to the system, you must boot from an external media that contains an installation image of the operating system. To do this, enter the Boot menu with the F11 key, similarly to the BIOS entry key is F2 (although if you have VAIO Care technology, you can enter the BIOS by pressing the Assist button and then choosing to launch the BIOS). In the BIOS, you can also configure the priority of loading the media, for example, if there is a disc in the DVD drive, or in the USB port of a flash drive, loading will occur from there. These manipulations are carried out in the BIOS in the “Boot” section, after disabling the protection against changing settings, by selecting the “Legacy” value opposite the “Boot mode” item in the “Boot” section.

Drivers for a sony vaio laptop, for example, for a WI-FI module and a Web camera, are in the system software. And if we take into account the fact that some laptop models have a hotkey for turning on the camera (for example, FnF12 in Fujitsu), and almost all of them have a WI-FI key, then in most Sony VAIO models such keys are absent. For example, if we consider the Sony VAIO T14 SVT14115CXS ultrabook, then the hotkeys present here after installing the drivers have the following combinations:

  • FnF1. enables / disables the touchpad;
  • FnF2. completely mutes the sound;
  • FnF3. sound reduction;
  • FnF4. sound increase;
  • FnF5. decrease brightness;
  • FnF6. increase brightness;
  • FnF7. Control multiple displays when a monitor is connected to the laptop via HDMI / VGA / SVGA.

In some models of this company there is a function of quick transition to sleep mode, enabled by the FnF12 key combination.

Since there are no hot keys for controlling WI-FI and the camera, it is necessary for their full operation to make sure that they are initialized and the drivers are installed. To check the WI-FI module in Windows 7, you will have to go to “Control Panel. Network and Internet. Network and Sharing Center. Change adapter settings”. In the window that opens, you can see all the network connections and WI-FI modules that are present on the Sony Vaio laptop. If there is no wireless WI-FI connection, you will need to re-initialize the device by installing the driver.

To enable the Webcam, some users may find it difficult to find it, since in many laptop models this device is not listed in the Scanners and Cameras list, as it is not an external camera with a separate driver. Therefore, to check it, you need to go to “Computer Properties (right-click on” My Computer “). Device Manager. Image Processing Devices”. In this list of devices, the webcam must be present.

How to fix the computer won’t start. Sony Vaio.-

sony, vaio, laptop, does, start

To Fix (Computer Won’t Start. Sony Vaio) error you need to follow the steps below:

Compatibility: Windows 10, 8.1, 8, 7, Vista, XP Download size: 6MB Requirements: 300 MHz processor, 256 MB Ram, 22 MB HDD

Limitations: This download is a free evaluation version. Full repairs starting at 19.95.

The computer does not start. Sony Vaio is commonly caused by incorrectly configured system settings or irregular entries in the Windows registry. This error can be corrected by special software that restores the registry and tweaks system settings to restore stability.

If your computer does not start. Sony Vaio, then we strongly recommend that you Download (Computer does not start. Sony Vaio) Repair Tool.

This article contains information that shows you how to fix Computer Won’t Start. Sony Vaio both (manually) and (automatically). In addition, this article will help you troubleshoot some common error messages related to Computer Won’t Start. Sony Vaio that you may receive.

Note: This article was last updated on 2021-04-10 and previously posted under WIKI_Q210794

The computer causes won’t start. Sony Vaio?

If you have received this error on your PC, it means that there was a malfunction in your system operation. Common reasons include incorrect or failed installation or uninstallation of software that may have left invalid entries in your Windows registry, consequences of a virus or malware attack, improper system shutdown due to a power failure or another factor, someone with little technical knowledge accidentally deleting a necessary system file or registry entry, as well as a number of other causes. The immediate cause of the “Computer Won’t Start. Sony Vaio” error is a failure to correctly run one of its normal operations by a system or application component.

READ  Sony TV writes connected without internet

Contents [show]

Update for April 2021:

We currently suggest utilizing this program for the issue. Also, this tool fixes typical computer system errors, defends you from data corruption, malware, computer system problems and optimizes your Computer for maximum functionality. You can repair your Pc challenges immediately and protect against other issues from happening by using this software:

  • 1: Download and install Computer Repair Tool (Windows compatible. Microsoft Gold Certified).
  • 2: Click “Begin Scan” to discover Pc registry issues that might be generating Computer issues.
  • 3: Click on “Fix All” to fix all issues.

The computer value will not start. Sony Vaio?

The computer will not start. Sony Vaio. This is the name of the error that contains information about the error, including the reasons for the error, the failure of the system component or application to cause the error, along with other information. The numerical code in the error name contains data that can be decoded by the manufacturer of the faulty component or application. An error using this code can occur in many different places within the system, therefore, despite the fact that it contains some data in its name, it is still difficult for the user to determine and correct the cause of the error without special technical knowledge or appropriate software.

info on Computer Won’t Start. Sony Vaio

Make sure the computer is powered off and I’m having trouble starting it up. The first thing to check is the cables, so if you’re feeling confident enough, greet and greet. Be careful with the PSU as it holds a lot of ground on its own so no static will fry anything.

It could be several things. I have a Sony Vaio and to go in the case make sure the cables are pushed in properly. Any Help? charge. and it’s this that could be the prob. SONY VAIO slows down on startup until the SONY logo loads.

If I understand correctly, your Vaio takes 7-8 seconds longer. But everything else in between (opening before you took the car to the repair shop? If yes, you can compare them, thank you Levan. When you turn off you get a black screen and this

how to install BIOS now. But if you don’t know how to tell BIOS, don’t worry about it. to display and about a total of 50 seconds to be able to use Windows 7.

Please, but the rest of the shutdown process takes about 30 seconds to complete. If so, my first reaction. Do you know what your BIOS settings were programs, internet search, etc.) were working fine? I have a VPCEB47GM and it takes about 10 seconds for the Sony logo to take a few seconds longer than you are used to.

On shutdown I usually get a black screen in about 5 seconds, originally configured, I wouldn’t change anything.

Please be aware, thank you Levan.

Does the system usually run in safe mode? RON

up and running after using System Restore. Perhaps it’s doing something intensive, but the Windows XP start up screen (with the little blue “progress” bar).

I have a 3 year-old HD is quiet; I haven’t a clue. In safe mode (with networking) I

Hello. ANY HELP through any of the safe modes. Is there anything I can look where

Any thoughts other than good; No problems. IS A GREAT RATING. Is there anything I would like to give me a hint about the problem? I can login

Now, after about an hour, I’m still looking at the Sony VAIO with XP Home. LATE BREAKING UPDATE: My system is back buy a new machine? checked the hardware and everything seems OK.

Hi my sony vaio (windows 7) won’t turn on after I clear the keyboard with AJAX

Go to the options menu where you chose the last known good type: C: \ Windows \ system32 \ restore \ rstrui.exe, then press Enter. Then I downloaded the latest Windows updates when he asked, But the computer just hangs up with the configuration but instead chooses: Safe Mode with Command Prompt, then press Enter. I tried all the options that appear on the screen; those. safe mode, last known good config and normal.

restart your computer, it never had time to restart again. Follow the instructions on

There must be a restore point before installing the update. At the command prompt from safe mode. Try System Restore.

I had a problem with some Windows logo screen viruses. What is the problem and how to solve it?

which I managed to remove with Malavera.

The machine is Sony on the Windows start page. I ran

It’s strangely loaded Windows again AND SAME PROBLEM. Vaio PCG-F360 runs Win 2K.

The computer just shuts down in safe mode. Any ideas.

I even completely removed the hard drives and rebooted Windows. The same diagnostic on HDD.

and then click “Next”. 3. Click “Repair becasue the system registry file is missing, or corrupt. If you do not have the disc, contact to start. Windows failed disc and restart your computer.2.

Microsoft your system administrator or computer manufacturer for assistance. your computer “. A recent hardware or software change might be the cause. Found it in his room, while he was away at school,

Choose your language setting, Answers.Louis

File: \ Windows \ system32 \ config \ systemStatus: 0xc000014cInfo: Windows could not load problem:

Paste your Windows installation. To fix and when I turned it on, this is the message I get.

Any ideas on what I can do then the safe mode menu.

I used my Sony Vaio laptop last night feeling like throwing my computer out of my window. Then I restarted my computer and exited and then the screen was black and it stayed like that. I chose Windows to start normally, this screen came in and the battery came out while it was loaded.

I turned it back on and tried every available option and nothing. Thanks, Josie

When it tries to restart the Vaio VX 88 laptop. Any ideas until you can get the data from any utility (like GetDataBack). It started to give me more and more numbers and I really need help.

Not much to do in this case, other than not using it in time and then giving a weird system error message. Starting with the recovery disc, it scrolls because your HD is gone. Whatever the point, I can’t do anything else that indicates the lack of an OS. James

Looks like error messages on StartUp and then just died.

Now it won’t boot in safe mode or major crisis in Windows or my hard drive is frying. So I’m now torn between thoughts that my hard drive is incredibly noisy.

Have you had any issues with sporadic slow-downs or issues with boot-ups before? To be honest this sounds like a hard drive issue (i.e. though, I assume you’ve tried removing it and trying again?

The laptop is running really slow. It it’d be okay. Etc.I doubt the USB stick is the issue. just in-case then came up with: “Windows failed to start.

Remove RAM but nothing works. When I press the power button, make sure the computer is turned on normally.

If not, the laptop will in this case) is heard.

I removed the battery and tried the battery and AC adapter. Press and hold only the adapter, but it will happen. WLAN flash also flashes. No noise (cpu fan Sony Vaio laptop VGN-S5HP / B. I even changed the power button for 2 minutes.

READ  TV Does Not See Phone Via USB

Connect the AC adapter, then turn on the power and battery indicator, then turn off.

Don’t know if there is anything here to help, but this list has a login screen editor 2.3.

Don’t need to include line clauses? I ran a system restore a few days before (since I thought the problem was reformatted? Any laptop that was bought just a couple of months ago.

IF you have multiples of the same Error same ID #, same known ‘, you will have lost some valuable information. But have no idea what’s causing the freeze My guess

We’ll go I had restarted it like 7 times afterwards without connecting, or CDs in Safe mode, so all info will be lost. Information events. Even using ‘Last known good configuration’ can be put off while attempts are made to find a cause of the problem.

Reformat is Ignore Source and same description, you only need to copy and paste it. to leave the computer for a while, so I put it to sleep. or how to even look for a problem.

But I can’t transfer any files or burn DVDs or of code in the box below the Description. Note, that it runs normally in Safe Mode, Unfortunately, since you went back to ‘last so I figured that the core files are fine.

Hi folks, I’ve got this problem with my SONY VAIO VGN-NR260D a last ditch effort when nothing else works.

when my wireless is turned off completely but it will freeze anyway. It worked fine until yesterday. I used Microsoft Office 2007 Power.

wouldn’t know how to even reformatt it, tbh. So i am no expert on laptops, I i get a blue screen: O and the error is “Virtual Driver Interface Failure”. It dosen’t want to if you have xp disk that would probably work too. Can anyone advise me how there.

Hey, let it be. It will load past 1st multiple screens (Vaio, Windos XP, etc.) and then how do I fix this problem? I have a Sony Vaio laptop which is Ty. If you have these vaio recovery discs, drop them in or have worked pretty well so far.

This way, WILL LOOSE WILL DELETE all your data and return the computer when you receive it. When I turn it on, it often goes to all your data.

a page where it says ‘Windows was unable to start’. I have tried taking battery out, booting in safe mode (which doesn’t work) recovery discs. it my have a recovery partition. access by tapping F10 on startup.

If it has a recovery partition up and running. if you choose this option with my 1year old Sony Vaio.

I’m having a problem. Very confused, any help is appreciated.

Did it come with any and using last known working settings, but still can’t get to log in page.

Within seconds, everyone can suddenly access the DVD / CD drive as usual from My Computer.

Dear friends, I have a Vaio VPCEB1S1E / BJ laptop. it stops and the light turns off.

I have set the BIOS in such a way that the top priority for the DVD drive yet will it kindly publish what exactly is displayed? However, when does the computer finish loading Windows i battery? How health helps me. you are welcome

Also, I tried to boot from the DVD drive, the light keeps flashing. I feel like the problem with the start button doesn’t pick up and go to USB or internal hard drive. My laptops in Germany.

You mentioned “some Windows error message”, can And from this on green that’s got to be checked for connections loose! I live has a problem.

It could also be a damaged power cable or data cable on your hard drive. Any ideas?

It could be a loose hard drive or a damaged hard drive.

Charger and cable

The end of the cable to the charger is not made in the best way. in the vertical position. From this, it now and then bends, which ultimately leads to a short circuit inside. Unfortunately, apart from the barbaric raskurochivanie this connection, the issue cannot be resolved. You need to repair the damage, or at least not let the damaged cables come into contact with each other.

An alternative solution to the problem is to pick up a universal battery. This is not a big problem, but many of them have a special voltage jumper, so you just need to know this parameter on the original charger. It is indicated on the sticker:

We used such a Chinese analogue (note the LED)

Sony VAIO laptop won’t charge: four main reasons

Option. Download the new firmware on the site

Fortunately, the official website has software for all models (https://www.sony.ru/electronics/support/personal-computers-laptop-pc)

The Downloads category contains files for BIOS.

After downloading, you need to run the file.

Download EP0000601230.exe and save it to a folder on your hard drive 2. Make sure the PC is connected to power via the AC adapter 3. Save your work and close all running programs 4. Navigate to the folder with the downloaded file 5. Twice click EP0000601230.exe 6. Follow the instructions on the screen 7. When the BIOS is updated, the computer will automatically shut down 8. After the computer has shut down, wait 60 seconds and then turn it back on. 9. After turning on the computer, the BIOS update installation will be completed.

Directions

A long time ago in a distant galaxy, or more precisely, in Japan and in 1996, Sony launched one of the most successful series of laptops under the VAIO brand. The design, assembly, and amazing durability of these laptops were repeatedly noted by specialized publications in the early 2000s. Unfortunately, in 2014 the series was discontinued and, despite the fact that the official website claims that support has not been stopped, often the owners have to solve problems on their own.

The claim about the colossal endurance of VAIO notebooks is backed up by our own experience. The author of this material has had a model for more than 7 years, while he has never been opened (for cleaning from dust, as is customary) and works to this day without reinstalling Windows and antivirus on board.

If there was a machine revolt in the world, we would like it to be VAIO laptops. The only problem that I had to face was the periodic loss of battery power. There are several reasons for this

BIOS problems

Along with iron problems, software problems can arise. Various “optimizers” of battery consumption can also give problems with power supply. there is no need to look for a magic pill, the service life needs to be extended in completely different ways. A similar problem occurs when installing a “non-native” battery and the laptop does not want to identify the battery from a non-manufacturer. You can bring it back to life by resetting the BIOS settings.

All manipulations with the BIOS you carry out at your own peril and risk. The tips below are not a guide to action. Only reset and / or update the BIOS if you understand what you are doing and why.