Samsung TV stopped seeing USB stick

USB service only port

In some TV models, next to the USB port there is an inscription “USB service only”. This means that such a port is used in service services exclusively for repair work. These connectors can be used if they are unlocked, but this requires specialist intervention.

Instructions in case the TV does not see the USB flash drive

Thanks to the presence of USB ports in modern TVs, each of us can insert our USB flash drive into such devices and view photos, a recorded film or a music video. It is comfortable and convenient. But there may be problems associated with the fact that the TV does not perceive the flash media. This can happen for a variety of reasons. Consider what to do in a similar situation.

What to do if the TV does not see the USB flash drive

The main reasons in this situation can be the following problems:

  • failure of the flash drive itself;
  • breakage of the USB connector on the TV;
  • the TV does not recognize the file format on removable media.

Before inserting a storage medium into the TV, be sure to read the instructions for its operation, and pay attention to the following nuances:

Perhaps, in the instructions for the device, you will be able to find an answer to the question related to the fact that the TV does not accept a USB drive. If not, you will have to check the operation of the flash drive, and this is quite simple to do. To do this, just insert it into your computer. If she is working, then you will need to figure out why the TV does not see her.

Checking for memory limits

Some TV models have restrictions on the maximum amount of memory for connected devices, including flash drives. Many TVs will not accept removable storage over 32GB. Therefore, if the operating instructions indicate the maximum memory capacity and your flash drive does not meet these parameters, you need to get another one. Unfortunately, there is no other way out in such a situation and cannot be.

Fix format conflicts

The TV may not support the file format you do not want to open with it. This situation occurs especially often on video files. Therefore, find the list of supported formats in the instructions for the TV and make sure that these extensions are present on your USB flash drive. Another reason why the TV does not see the files may be their name. For the TV, it is preferable to view files named in Latin letters or numbers. Some TV models do not accept Cyrillic and special characters. In any case, it will not be superfluous to try to rename all files.

Eliminate system format incompatibility

The cause of the problem, due to which the flash drive is not recognized by the TV, may lie in a different type of file system. The fact is that most of these devices only accept the FAT 32 file system. It is logical that if your flash drive is formatted under “NTFS”, you will not be able to use it. Therefore, be sure to read the instructions for your TV.

SAMSUNG Tv won’t recognise USB flash drive. FIX

If the file system of the flash drive is really different, then it needs to be reformatted.

  • Insert the USB stick into your computer.
  • Open “This PC”.
  • Right-click on the flash drive icon.
  • Select the item “Format”.
  • In the window that opens, select the file system type “FAT32” and click the “Start” button.
  • At the end of the process, the flash drive is ready for use.
  • Now try using it again. If the TV still does not read the drive, use the following method.

    Flash drive file system crash

    Sometimes there is such a situation when you have repeatedly connected a specific USB flash drive to the TV, and then it suddenly stops being detected. The most likely cause is wear and tear on the file system of your flash drive. To check for bad sectors, you can use the standard Windows OS tools:

    • Go to “This computer”.
    • Right-click on the image of the flash drive.
    • In the drop-down menu, click on “Properties”.
    • In a new window, open the “Service” tab
    • In the “Check disk” section, click “Check”.
  • In the window that appears, check the checkboxes “Automatically fix system errors” and “Check and repair bad sectors”.
  • Click on “Run”.
  • At the end of the check, the system will issue a report on the presence of errors on the flash drive.
  • If all the described methods do not solve the problem, then the USB port of the TV may be faulty. In this case, you should contact the place of purchase, if the warranty is still valid, or the service center for repair and replacement. Good luck in job! If you have any questions, write them in the Комментарии и мнения владельцев.

    Ways to connect USB media to TV

    Reasons why the computer does not see the USB flash drive

    samsung, stopped, seeing, stick

    Among the reasons for the appearance of a problem can be both OS malfunctions and hardware failures. First, we recommend trying to fix the problem using programmatic methods. Then you need to check the health of the PC hardware components and the operation of the flash drive on other computers.

    The simplest and most common cause of errors in the operation of a flash drive is a computer that gets very hot. If the USB port is located near a cooling system, a rise in temperature may force the port to shut down. Thus, the OS automatically protects the port from damage;

    The computer does not see the USB flash drive if there is no USB driver software or the program is incorrect. This situation is mainly faced by users who have recently reinstalled the OS and have not yet configured it to work;

    The first connection of the flash drive to the computer may be accompanied by a message about the need to format the storage. This will erase all data and files. Without formatting, you will not be able to use the USB flash drive in this system, since its parameters are not compatible with the OS settings. To save the data you need, connect the drive to another PC.

    • Windows 10 error codes. what they mean and how to fix it
    • Google play services error: what are there and instructions on what to do
    • Windows 7 error code. all the most common, causes and fixes
    • Incorrect device detection.

    When you hear the sound of the connected device, but do not see it in the explorer, you can say that an error has occurred in the system partitions and the name of the drive. This is the reason why the USB flash drive is not visible on the computer. The system simply assigned it an existing drive letter;

    • The conflict between the PC file system and the flash drive.

    In this case, you can open the drive folder, but it will be empty. For example, if your computer is configured with NTFS. and on a FAT 32 flash drive. two devices will be able to configure the connection, but the user will not be able to view files or add them to the drive folder;

    According to statistics, over 70% of all malicious programs are written specifically for installation and distribution via external USB gadgets. Perhaps the built-in OS defender simply “does not pass” the flash drive so that the virus does not spread.

    • USB port disabled in BIOS settings.

    In this case, the user needs to independently enter the system menu and activate the port.

    We often carry flash drives in bags, s. This can damage the device by third-party objects. Be sure to check if the USB connector on the flash drive is dusty. If necessary, it can be cleaned with a dry cotton swab.

    If you are using a desktop PC, the ports on the front of the case may be de-energized. This happens when, during the assembly phase, the front panel of the PC is not connected to the general power system. You can fix the problem at any service center.

    We also note the cases when the computer does not see the Micro SD flash drive. This happens when the connector is faulty (the adapter that connects the memory card and the USB port on the computer). Also, different file systems can cause the problem.

    The solution to the problem must be started by working with the standard diagnostic utility. In Windows 7, 8, 10, this utility is installed by default. Its main advantage is the ability to determine exactly why the computer does not see a USB flash drive or other connected device.

    • Open the Action Center and click on the “Options” tile;
    • Then click on “Update and Security”, and in a new tab go to “Troubleshooting”;
    • On the right side of the screen, find the item “Hardware” and select it. The diagnostic utility will open, which automatically detects the problem and solves it.

    To run the recovery tool in Windows 7, you must press the Win R key combination and enter the command indicated in the figure in the Run window that opens. Click “OK” and the diagnostic utility will open in a new window.

    Why the computer stopped seeing the USB flash drive and what to do?

    The most common reason why a computer does not see a USB flash drive is a problem in the USB connector itself. Very often, this problem is encountered by users whose USB connector is located on the front of the system unit. To establish that the problem is caused by the USB ports, try connecting the USB flash drive to the USB port located on the back of the system unit on the motherboard itself. If the flash drive works, and the computer sees it, then the problem lies precisely in the inoperative state of the case connectors. In this case, you need to check the connection of this block of USB ports to a special connector on the motherboard: the connection must be made correctly to the corresponding port.

    READ  Samsung A 51 Screenshot

    USB ports are so tightly embedded in our computer life that they are often simply not enough. Even despite the fact that most motherboards have 6 or more ports, sometimes they are not enough to connect all the necessary devices, for which many use special USB hubs. As a result of a large number of devices connected to the hub, its power may not be enough for the flash drive, and the computer is not the same, plug the flash drive into another USB connector, not through the hub, or unload this USB hub so that there is enough power for the flash drive.

    Most USB devices today support USB 3.0. Regardless, they should be able to work with version 2.0 as well. Nevertheless, there are examples when new flash drives refused to work on older versions of the problem as such. In some cases, a flash drive may not work on USB connectors located on the front of the system unit, in this case, connecting to USB connectors on the motherboard sometimes solves the problem, but not in all cases. To completely solve the problem on your computer, you will need a USB 3.0 port.

    Another reason that the computer does not see USB may be the lack of a driver in the operating system. In this case, both all USB ports and only the ports of the version may not work to fix the problem, it is enough to install the driver that is located on the disk that comes with the motherboard, or download the corresponding driver from the official website of the manufacturer of your motherboard.

    Viruses can also be the reason that the computer does not see or does not open the USB flash drive. Thus, a virus on a flash drive can slow down the opening of the device, and sometimes even destroy data. Also, the presence of a virus can cause the flash drive to not open, because a virus is detected on the flash drive due to its blocking, then try to cure it, which is not always fully successful and the likelihood of data deletion remains. If you really need data from a flash drive, then you can copy it to a device under a different operating system, or move it to the cloud storage, where the device can be formatted, and the data can then be re-saved. Otherwise, it is recommended to completely format the USB flash drive by deleting all data from it.

    The flash drive may not open on the computer due to the fact that it is formatted in an unknown operating system with a file on this flash drive, then try to open this flash drive on another computer, copy the data, format it and then copy the information to it again. If the flash drive is new and important data is not stored on it, then simply format it in the NTFS file system, and it will be displayed in Explorer.

    A flash drive, like any other device for recording and storing data, has its own service life, more precisely, it has a limited amount of information recording. Many researchers have named the figure 100,000 times, that is, each sector supports a given number of rewrites. When the sectors become inoperative, they seem to be cut off and no data is written to them, in this case the volume of the flash drive is actually reduced, but, nevertheless, data is written to the working sectors until they make up most of the memory flash drives.

    If the TV does not recognize all sections

    If the TV reads the hard drive, but does not recognize all the partitions, this indicates that an internal hard drive is used, designed for laptops or PCs, but placed in a special box. Such drives can connect without problems, but few TV sets will be able to fully recognize it with all partitions and files.

    On a note! If the operating system is installed on the internal hard disk of the PC, the TV will not detect the partitions with the files necessary for its loading, functioning and recovery.

    So, there are many reasons why the hard drive is not detected by the TV. To fix the problem, you need to diagnose the devices step by step, as described in the material above. But if the hard drive still remains invisible to the TV receiver, it could be caused by a breakdown of one of the devices. In this case, it is necessary to contact the specialists at the service center, since only they can competently help.

    Using the USB port on the TV

    The easiest and most natural way to connect a TV to a USB flash drive is to insert it directly into the port on the TV panel case. The algorithm of actions is as follows:

    • Write to a USB flash drive the data you want to view on the big screen.
    • Insert it into the USB port on the case (most likely, it is located on the back panel).
    • Turn on the TV-device and go to the “Menu”.
    • Select to read data from the required medium.
    • Then select the information on the media that you want to view.

    If you could not find the required connector on the TV-panel case, then use the adapter. This is a cable with an HDMI connector on one end and a USB on the other. As a rule, such cables are not long, but only 20-30 cm. The sequence of actions required for viewing is saved.

    If the video broadcast has not started on the TV set, it means that the format in which the file was recorded is not supported by the TV device. In this case, you will have to download the movie in a different format, but first find out what formats the TV supports.

    Using a computer or laptop

    It is not necessary to watch movies from a flash drive, you can broadcast them directly from your computer or laptop. It is only necessary to connect these devices together. There are several types of wired connections:

    • HDMI cable.
    • HDMI adapters.
    • DVI and adapters with this port.
    • SCART connector, which is not particularly popular.
    • Via VGA output, and using adapters with this output.
    • With RCA adapters.

    Broadcasting can also be done wirelessly using a home Internet network. To do this, both devices must support the Miracast function, which mirrors the laptop screen on the TV panel screen. Before establishing a connection, you need to make sure that the PC has the necessary drivers.

    It is especially easy to stream content from a tablet or smartphone that easily connects to a Smart TV. To do this, it will be enough to select the “Screen broadcast” menu item.

    File system format mismatch

    The most common formats are NTFS and FAT32. The TV can only accept devices that are formatted in a specific format. If the format of the flash drive is different from what the TV needs, the memory will not be displayed in the menu. Then you need to perform formatting by setting the desired system format.

    TV requires FAT32 format, although NTFS can also be tried.

    The disadvantage of FAT32 is the inability to copy a file larger than 4 GB to the media. Therefore, you will not be able to watch a movie in UHD quality through a USB flash drive. Video files of this quality can weigh significantly more.

    Formatting instructions (same for all Windows versions):

    • Insert “portable” memory into your computer.
    • Open This PC. In the “Devices and drives” section, find the drive you want.
    • Click on it with the right mouse button.
    • Next, open the “Format” section of the context menu.
    • In the “File system” line, open the drop-down list. Select FAT32. Click on the “Start” button.

    Formatting will delete all data from the flash drive. Therefore, first copy the contents of the drive to another system or removable drive.

    Eject the drive through the icon menu on the taskbar.

    After the icon disappears, you can remove the device from the computer. Insert the drive into the TV port and open it through the “Source” menu.

    Why did the TV stop seeing the USB flash drive or does not play video

    Television has long become not only a technique for watching digital or analog terrestrial television channels. You can connect a USB flash drive to a TV even of older models. To do this, there is one or more USB connectors on the back of the TV receiver.

    For some reason, the TV may not find the USB flash drive after connecting. The reason may lie in hardware malfunctions. But sometimes the TV does not see the USB flash drive for other reasons. Let’s figure out why the flash drive cannot be read by the TV and what to do.

    The TV does not play video from the flash drive

    There are several situations when working with files on USB-Flash through a TV:

    • the system does not see files (videos, films) recorded on the USB flash drive;
    • TV does not show video. The file is in the folder, but notifications are written when trying to play. The labels may be different for each device. For example: “Unable to play”, “Unsupported format”, “File not readable” or “Playback error”.

    To solve the first problem, try placing the files in the root directory. If the files are named in Russian letters and contain additional characters, rename them to the Latin alphabet. Don’t make the name too long.

    The main reason is that the video format is not supported by the TV system. You need to download a new video file in a supported extension or convert existing files.

    READ  How to turn off parental controls on a Samsung phone

    It happens that the file is found, but the TV does not read the video (situation). The problem most likely lies in the incompatibility of formats. It’s not even the video file format. Each movie file includes two tracks. audio and video. If the video format can be played by the TV receiver, e.g. avi, then the file will be displayed in the list. But the audio track may have a different format, which interferes with playback. You need to convert or upload a new file with the desired characteristics.

    The flash drive is not visible due to the large amount of memory

    The TV firmware contains the maximum amount of media memory that can be used. Older TVs can often not see an external flash drive larger than 8 or 16 GB. Modern TV models are designed for drives with 32 and even 64 GB of memory.

    The way out can be a flashing of the TV. Only a specialist can do this. And bothering so just for the sake of connecting flash memory is impractical. Therefore, it is better to transfer the file (video, movie, music) to a smaller flash drive.

    If there is no less voluminous flash drive, you can create a partition on the current drive with the optimal memory size. Actions are performed on the computer via the command line. The process is described in detail in the video.

    You can find out the limitations on the amount of memory for connected external devices by referring to the documentation for your TV. If there is no information in the specifications, contact support on the manufacturer’s official website. Popular brands provide support in Russian.

    Service port in use

    On some TV models, one of the USB inputs can be signed “Service only”.

    This connector is blocked for normal reading of external media. Serves for diagnostics and repair. The port can only be used after it has been unlocked by a specialist.

    Using adapters, extension cords

    Rarely, but it can be caused by the use of USB extenders. Likewise with adapters, splitters, USB hubs. Connect the drive to the port on the TV directly.

    File system corruption

    Frequent use of the drive leads to its wear and tear, the appearance of broken sectors. Damage can cause the TV to stop seeing the USB flash drive. Emergency removals from the connector also lead to malfunctions of the drive, especially during operations with a flash drive.

    You can check a removable flash drive for broken areas, you can correct errors using standard Windows operating system tools.

    • In the “Computer” open the context menu of the drive by pressing RMB.
    • Go to “Properties”.
    • On the “Service” tab, click on “Check”.
    • In the window that opens, activate two options (on Windows 7): “Automatically fix system errors” and “Check and repair bad sectors”. Start scanning by clicking on “Start”.
    • On Windows 10, select the “Check and repair disk” option.

    Samsung TV stopped seeing USB stick

    Thanks to the presence of USB ports in modern TVs, each of us can insert our USB flash drive into such devices and view photos, a recorded film or a music video. It is comfortable and convenient. But there may be problems associated with the fact that the TV does not perceive the flash media. This can happen for a variety of reasons. Consider what to do in a similar situation.

    Flash drive file system crash

    Sometimes there is such a situation when you have repeatedly connected a specific USB flash drive to the TV, and then it suddenly stops being detected. The most likely cause is wear and tear on the file system of your flash drive. To check for bad sectors, you can use the standard Windows OS tools:

    • Go to “This computer”.
    • Right-click on the image of the flash drive.
    • In the drop-down menu, click on “Properties”.
    • In a new window, open the “Service” tab
    • In the “Check disk” section, click “Check”.
  • In the window that appears, check the checkboxes “Automatically fix system errors” and “Check and repair bad sectors”.
  • Click on “Run”.
  • At the end of the check, the system will issue a report on the presence of errors on the flash drive.
  • If all the described methods do not solve the problem, then the USB port of the TV may be faulty. In this case, you should contact the place of purchase, if the warranty is still valid, or the service center for repair and replacement. Good luck in job! If you have any questions, write them in the Комментарии и мнения владельцев.

    Thank the author, share the article on social networks.

    Sometimes users are faced with the problem that the Samsung TV does not see the USB flash drive. To quickly fix the situation, you need to determine the cause of the breakdown and try to fix it yourself.

    How to connect a USB flash drive to a TV

    To view files from a USB flash drive on a TV, both devices must be properly connected. There are 5 main ways to do this, which are suitable for any Samsung Smart TV model.

    • Via USB port. Most “Samsung” TVs released after 2010 are equipped with a USB connector. It can be found on the side or back of the device. To connect a USB flash drive to a TV, just insert it into the socket. You can view recorded files by opening the connected device with the remote control.
    • DVD player. This option is used if the TV does not have a USB port. To connect, insert the removable media into the corresponding connector on the player. The DVD player is connected to the TV. They turn on both devices and open the USB flash drive with the remote control from the player.
    • Media player. This is a modern device that reads any format and allows you to view files from removable media. The connection process is the same as for a DVD player.
    • Digital tuner. All set-top boxes are equipped with one or more USB ports. This allows you to view videos or photos saved on removable media. To connect a USB flash drive, you need to insert it into the USB port of the tuner connected to the TV. After that, it remains to go to the device menu and select the desired file.
    • A computer. This option is rarely used when there is no opportunity to use any other. To view files, the flash drive is connected to a computer that was previously connected to the TV (for example, via HDMI or Wi-Fi).

    Checking for memory limits

    Some TV models have restrictions on the maximum amount of memory for connected devices, including flash drives. Many TVs will not accept removable storage over 32GB. Therefore, if the operating instructions indicate the maximum memory capacity and your flash drive does not meet these parameters, you need to get another one. Unfortunately, there is no other way out in such a situation and cannot be.

    What to do if the TV does not see the USB flash drive

    The main reasons in this situation can be the following problems:

    • failure of the flash drive itself;
    • breakage of the USB connector on the TV;
    • the TV does not recognize the file format on removable media.

    Before inserting a storage medium into the TV, be sure to read the instructions for its operation, and pay attention to the following nuances:

    • peculiarities of working with the file system of a USB-storage;
    • restrictions on the maximum amount of memory;
    • access to USB port.

    Perhaps, in the instructions for the device, you will be able to find an answer to the question related to the fact that the TV does not accept a USB drive. If not, you will have to check the operation of the flash drive, and this is quite simple to do. To do this, just insert it into your computer. If she is working, then you will need to figure out why the TV does not see her.

    Why the TV does not see the USB flash drive?

    The reasons that the TV does not read the USB flash drive. quite diverse, among them:

    • unsuitable file system;
    • the drive is divided into partitions;
    • the TV does not support flash drives with this amount of data (in older devices there is a limit on the amount of storage);
    • problems with USB hubs or extension cables;
    • conflict between 2-3 devices connected via USB;
    • complex data structure on a flash drive;
    • incorrect device definition;
    • malfunction of the drive or the connector itself.

    The TV does not see the USB flash drive. reasons, ways to fix the failure

    Quite a common problem. the TV does not see the USB flash drive. At the same time, often the PC successfully recognizes the USB-drive or it worked before, but now it does not, although nothing special was done with it. The problem has quite a few primary sources: from an incorrect file system to physical damage. However, with the help of the actions in our instructions, in most cases (about 80-90%), it is still possible to solve the problem, moreover, without investing money and with a minimum investment of time.

    The TV does not read the USB flash drive, what to do?

    It will greatly reduce the time if you can roughly guess why Smart TV Philips, Xiaomi or another does not work with the drive. We can do this based on hints: were there any actions with the file system on the flash drive, is another device supported on this TV, what is stored on the drive, etc. We will not rely on luck or intuition and will use the exclusion method, starting from the simplest ways to solve the problem and ending in more complex ways.

    What to do if your Samsung TV can’t see your USB stick:

    • Restart the TV. This will eliminate the risk of accidental failure.
    • Refuse to use USB hubs and extension cords. Sometimes USB device support is not possible just because additional devices are not working properly. It is worth trying to disconnect all unnecessary and connect the drive directly to the connector.
    • Move flash device. If Smart TV does not see the USB flash drive. we recommend switching it to a different socket. Maybe it’s the USB version or the port has poor contact.
    • Disable all additional devices. When the TV stopped seeing the USB flash drive, and the computer sees it, we recommend eliminating the risk of conflicts and incorrect operation of several devices when using other USB connectors at the same time.
    • Lighten the folder structure. Firstly, it is worth reducing the number of unnecessary libraries and files, and secondly, renaming Russian directories into English ones. TV may have a limit on the number of items. So LG may refuse to work with a flash drive where there are more than 1000 files, and Samsung TV does not play video from a flash drive when the mark of 4000 elements is exceeded.
    • Check if the TV supports flash drives of this size. If the TV does not see the USB flash drive, but the computer does. very often the problem is in this limitation. We can check the guess in the paper documentation for TV. Many older TVs only work successfully with 32GB USB sticks, with the upper limit for external HDDs reaching 1TB. If your flash drive is 64GB, it won’t work, but you can try formatting it to FAT32 (it will limit the size to 4GB).
    • Format the USB stick. The first step is if the LG TV does not see the USB flash drive. is the formatting of the file system. To do this, open “This computer” on the PC, right-click on the flash drive and select “Format”. We suggest choosing the ExFAT option. This file system is supported by most devices, and also has no restrictions on the size of the drive.
    • Check the operability of the flash drive and connector. First, it’s worth checking if the drive works on other devices. Then we check that alternative USB accessories are working in this port of the TV. This will rule out or confirm physical problems.
    READ  How to put music on Samsung a50

    A few tips for connecting a flash drive to an LG / Samsung TV

    Everyone seems to know. how to connect a USB flash drive to an LG TV or another, but even in this matter there are difficulties. First, it’s worth checking the connector version. If the drive is new, it might work better with USB 3.0. this is the latest version that comes with modern TVs. It should work with the old USB 2.0 too, but this is not always the case. Secondly, it is better not to use various adapters and extension cords, although sometimes you cannot do without them, in which case it is worth checking their performance separately.

    The listed solutions should help you find the reason why the TV does not see the USB flash drive, as well as help in fixing the problem. If nothing helps at all, you will have to replace the drive or even send the TV to repair the connector. Usually, this does not come to this and you manage to decide everything on your own.

    Memory card capacity

    Many TV models have clear limits on the maximum memory size of the connected devices. It cannot be ruled out that this very restriction was the reason that the TV does not read the USB flash drive. Many TVs do not read devices whose memory exceeds the 32 gigabyte mark.

    Open your TV manual and read the information regarding maximum volume limits. These restrictions cannot be changed. The only solution is flashing. However, only specialists can cope with such work. Modern TVs Philips, Sony, Samsung, LG and devices from other manufacturers allow you to watch movies on flash drives and 64 GB. Limitations are mostly found on older TV models.

    Problems with the file system of the flash drive

    Quite often, users are faced with a situation when TV opened files from a flash drive, but then abruptly stopped detecting removable media. What causes this problem to appear. The simplest explanation why the TV stopped seeing the USB flash drive is wear and tear of the removable media file system. To diagnose and identify bad sectors, use the default services of the Windows operating system:

    • Open “My Computer” by double-clicking on the corresponding icon.
    • Right-click to click on the removable media.
    • In the context menu that opens, select “Service”.
    • In the “Check disk” section, activate the “Check” command.
    • In the dialog box that appears, you need to set the diagnostic parameters. Check the boxes next to the command. “Automatic update of system errors”, “Search and repair of bad sectors”.
    • To start diagnostics and error correction, click LMB on the “Run” button.
    • When the check of the flash drive is completed, a report on the errors found will appear on the screen.

    How to FIX SAMSUNG TV not showing USB STICK Files

    Be sure to format the USB flash drive, and then write down the necessary files on it and insert it into the corresponding connector on the TV. Check if several media are connected to the TV at the same time, then disconnect those that you do not plan to use at the moment.

    Incompatible formats

    What if the TV does not see the USB flash drive? Mostly this problem occurs due to different file systems on the flash drive and TV. Mostly TVs are able to read flash drives in the “FAT 32” format. If you formatted the flash drive under “NTFS”, then it will not be possible to play files from it. Therefore, before recording content to a removable disk, be sure to check the instructions for your TV to find out about possible restrictions.

    The problem of incompatibility of file system formats is solved quite simply. The user needs to reformat the USB stick. This is done as follows:

    • Connect the removable storage device to your laptop or computer.
    • Go to “My Computer” by double-clicking the LMB on the corresponding icon.
    • Right click on the icon of your flash drive.
    • From the drop-down context menu, select the “Format” command.
    • In the dialog box that opens, the type of the file system is selected. In our case. “FAT 32”.
    • Left-click on the “Start” button. Once the process is complete, the flash drive will be ready for use

    Try again to insert the removable drive into the TV, and then play audio, photo or video from the flash drive. If this option did not help to solve the problem, then be sure to check the functionality of the USB connector.

    Sometimes users are faced with the problem that the TV detects the flash drive, but certain files do not open. Such crashes can occur due to the fact that the TV does not support a particular file format. Most of the problem occurs when trying to play video files. Therefore, study the manual of your TV to know which extensions the TV model supports.

    Even the file name can cause the TV to not play content. To reduce the likelihood of problems opening content, name the files with numbers or Latin characters. Many TVs corny do not read files, folders that contain Cyrillic letters or special characters.

    What to do if the TV does not see the USB flash drive or does not read the video

    TV owners actively use removable storage devices to watch movies, TV series and listen to music. Why can’t the TV see the USB stick? There are several reasons for this problem:

    • the flash drive has broken;
    • USB interface does not work;
    • TV does not detect the format of files recorded on removable media.

    Before inserting the USB flash drive into the TV, be sure to read the instruction manual for the equipment. Special attention should be paid to the following aspects:

    • compatibility of the file system of the flash drive and TV;
    • limit on the maximum allowable memory size;
    • availability of access to the USB input.

    It is possible that the instructions will say about how to solve problems related to connecting a USB flash drive or external hard drive. Be sure to check the functionality of the removable media. It is extremely easy to do this, just connect it to your laptop or computer. If everything works, but the TV still does not see the connected device, then the following troubleshooting methods need to be considered.

    The USB port on the TV is blocked

    Suppose that the removable storage device is working properly, then a completely natural question arises, why the TV does not see the USB flash drive? The problem may lie in a faulty connector. Mechanical damage and short circuits become a catalyst for port breakdown. If the USB stick comes off the connector, it is probably broken.

    Another reason for port problems is blocking. There is a corresponding inscription “USB service only” near the blocked connectors. This means that the interface is intended solely for repair work. It is possible to unblock such ports, but only specialists can do it. Contact the service center for the wizards to reflash the interface. Mostly TVs are equipped with multiple USB ports. Therefore, if there is an inscription “USB service only” next to one, just insert the USB flash drive into another port.