Reset iPhone to Factory Settings via iTunes

How to turn off Find My iPhone

  • Move the slider next to this function to the off state. To make the final changes, you will need to enter your Apple ID password. From now on, a full reset of the device will be available.
  • How to Hard Reset iPhone

    Recovery Mode

    The following method of restoring a gadget via iTunes is only suitable if the gadget was previously paired with your computer and the program. But in situations where recovery is required to be performed on someone else’s computer, for example, to remove the password from the phone, using the recovery mode is suitable.

    • Unplug your phone completely and then connect it to your computer using the original USB cable. Launch iTunes. Until the phone will be detected by the program, since it is in an inactive state. It is at this moment that you will need to enter it into recovery mode in one of the ways, the choice of which depends on the gadget model:
    • iPhone 6S and younger Simultaneously hold down two keys: “Home” and “Power”. Hold them until the phone screen turns on;
    • iPhone 7, iPhone 7 Plus. Since this device does not have a physical Home button, it will enter recovery mode in a slightly different way. To do this, hold down the “Power” and volume down keys. Keep holding until the smartphone turns on.
    • iPhone 8, 8 Plus and iPhone X. In the latest models of Apple devices, the principle of entering Recovery Mode has been quite changed. Now, to put your phone into recovery mode, press and release the volume up key once. Do the same with the volume down button. Hold down the power key and hold until the device turns on.
    • The following image will indicate a successful entry into Recovery Mode:
  • At the same instant, the phone will be detected by iTunes. In this case, in order to reset the settings on the gadget, you will need to select the “Restore” item. After that, the program will start downloading the latest available firmware for the phone, and then installing it.
  • Factory reset iPhone

    Hard resetting your device will erase all information previously contained on it, including settings and downloaded content. This will restore it to the state it was in after purchase. You can perform a reset in different ways, each of which will be discussed in detail below.

    Note that you can only zero your device using the first three methods if the Find iPhone tool is disabled on the device. That is why, before we move on to the analysis of these methods, we will consider how the protective function is deactivated.

    iTunes

    The main tool for pairing iPhone with computer is iTunes. Naturally, a complete reset of content and settings can be easily performed using this program, but only if the iPhone was previously synchronized with it.

    • Connect your phone to your computer using a USB cable and launch iTunes. When the smartphone is identified by the program, at the top of the window, click on its thumbnail.

    On the Overview tab on the right side of the window, there is a Restore iPhone button. Select her.

  • Confirm your intention to reset the device and wait until the end of the procedure.
  • IPhone Settings

    Perhaps the easiest and fastest way to perform a reset is through the settings of the phone itself.

    At the end of the window that opens, select the “Reset” button.

  • If you need to completely clear the phone of any information it contains, select “Erase content and settings”, and then confirm your intention to continue.
  • How to Factory Reset iPhone: 3 Ways for Different Occasions

    reset, iphone, factory, settings

    Keep a quick cheat sheet on how to factory reset iPhone. with and without iTunes.

    For a number of reasons, you may need to reset your iPhone to factory settings. In Apple’s terminology, this is called “restoring iPhone”, that is, returning the original settings and setting up the smartphone as new. Read below for three ways to do this.

    Method two, through iTunes (the device does not turn on)

    If the iPhone can’t start up on its own, you’ll again need a computer with iTunes and a USB cable. To reset the settings, follow the instructions:

    • Connect iPhone to Computer and Open iTunes.
    • Under Settings [your name] iCloud, turn off Find My iPhone.
    • On the connected device, make a forced restart:
    • IPhone 8 or later: Press and quickly release the Volume Up button. Press and quickly release the volume down button. Then press and hold the power button until the recovery mode screen appears.
    • On iPhone 7 or iPhone 7 Plus: Press the power button and the volume down button at the same time. Hold them until the recovery mode screen appears.
    • IPhone 6s and earlier: Press the Home and Power buttons at the same time. Hold them until the recovery mode screen appears. In all three cases, it looks like this:
  • A pop-up window appears in iTunes asking you to restore or update your device. Click “Restore”.
  • In this case, the iPhone settings will also be reset to factory settings, and the current version of the operating system will be “uploaded” to the device.

    Method one, through iTunes (the device turns on)

    If your iPhone isn’t severely damaged and can turn on, and you have a USB cable and a computer or laptop with iTunes installed, do the following:

    • Launch iTunes on your computer.
    • Under Settings [your name] iCloud, turn off Find My iPhone.
    • Connect iPhone to computer with USB cable. If iTunes requires you to enter a password or make this computer trusted, follow the instructions of the program.
    • When the device is displayed in the program, select it in the panel on the left.
    • On the Overview tab, click the Restore iPhone button.
    • In the pop-up window, click “Restore” again to confirm.

    After that, the device will be cleared of your data and returned to factory settings, and the current version of iOS will be installed.

    Method three, without iTunes (the device turns on)

    You can also do a factory reset on the iPhone itself if you don’t have a computer. But this can only be done if the device turns on.

    To do this, follow these steps:

    • Go to the device menu in the “Settings” “General” “Reset”.
    • Click “Erase Content and Settings”.
    • Enter your device password or Apple ID password to confirm.

    After that, wait for the settings to be erased. The device will be returned to factory condition.

    If your iPhone turns on, we recommend that you back up your data to Apple cloud or external storage before resetting.

    Hard reset

    All iPhones can be restored to factory settings by a so-called “hard reset”. For all models up to and including 6, this is done by pressing the Home and Shutdown buttons for about 15 seconds until the white Apple logo appears on a black background. The following procedure is the same as when you first turn on the device.

    READ  How to change Apple ID on iPhone

    iPhone 7 and 7 plus restart by holding down the power and volume down buttons for at least 10 seconds.

    For Apple phones from model 8 and newer, Hard Reset is done in three stages:

    • quickly press the volume up button;
    • quickly press the volume down button;
    • hold and hold the side button until the white Apple logo appears on the black screen.

    Reset via the “Settings” menu

    Before you reset the settings on an Apple device, you need to charge it well, preferably up to 100%, and provide access to a stable Wi-Fi connection.

    • If iPhone is paired with watch, you need to stop syncing.
    • Sign out of your iTunes Store, iCloud, and App Store accounts. To do this, open the “Settings” menu, click on the name. At the very bottom of the page that opens, activate the line “Exit”.
    • We return to the “Settings” menu, go to the “General” section, select “Reset”, and then “Erase content and settings”.
    • When the “Find iPhone” function is enabled, you will need to enter the password from “Apple ID”.
    • Enter passwords for accounts on demand.
    • After rebooting the device, enter the data requested by the smartphone.

    Via iCloud

    This method works on any device: computer, tablet or smartphone.

    • Go to the iCloud.com website.
    • Sign in to your Apple ID.
    • Launch the Find iPhone application.
    • We go to the menu “All devices”, select the desired.
    • A window will appear on the right in which we click “Erase iPhone”.
    • We reaffirm our decision.
    • The program will require you to enter your Apple ID login information.
    • At the next step, you can enter a phone number, or you can simply click “Next”, and then “Finish”.
    • The process of resetting the gadget’s settings will begin immediately if it is connected to the Internet, or later, as soon as it appears on the network.

    Do I need a backup

    Before erasing all iPhone settings, it is recommended to back up your device if it was not automatically set up to create it. It stores the following information:

    • all device settings;
    • data about installed applications;
    • SMS, MMS and iMessage;
    • display settings and location of programs on it;
    • media files;
    • Health application statistics;
    • purchase history in iTunes, AppStore, etc.
    • contacts.

    When you reset to factory settings, there is no guarantee that this information will never be useful to you, so it’s better to create a backup just in case.

    Via iTunes

    By applying this method, the user receives as a result a smartphone, reset to factory settings, cleared of personal information, with the latest version of iOS.

    • Checking the current version of iTunes.
    • Disable the “Find iPhone” function, for this you need to enter your Apple ID password.
    • We connect the gadget to the computer with a USB cable.
    • Launch iTunes on your computer.
    • The application will display your device, select it.
    • We go to the “Browse” tab on the left side of the screen, and in the window that opens in the first block, click the “Restore” button.
    • The smartphone will reboot and require data entry, as on the first launch.

    How to Factory Reset iPhone

    There comes a time in using Apple gadgets that you want to “clean” it and start using it from scratch. For this there is a function “Reset settings”. We will tell you how to use it below.

    Resetting to factory settings completely clears the memory of the device from information added by the user, returning it to its original state. This is necessary when:

    • pre-sale preparation of the device;
    • numerous experiments with applications and other data;
    • prevention of failures in the firmware.

    If you nevertheless decide to clear the Apple gadget of unnecessary information and configurations, you can do this in one of the following ways.

    Do not try to delete contacts and other information manually, this will delete data from the iCloud cloud storage and make it impossible to recover.

    How to reset settings without a password

    This can be done only if the “Find iPhone” function is disabled for the gadget.

    • We connect the smartphone to the computer with a USB cable, run the iTunes program on the PC.
    • Simultaneously hold down the Home and Lock buttons for 10 seconds, until the Apple logo disappears from the screen. Then release the lock button and hold the Home button for another 5 seconds until iTunes detects the connected device in recovery mode.
    • Follow the instructions on the screen. The settings will be reset and, if necessary, the software will be updated.

    All described methods can be accurately applied only for 100% clean devices that have not previously been exposed to the intervention of third-party programmers. In this case, the manipulation of resetting the settings can lead to the irreversible blocking of the gadget.

    Reset via iTunes

    In order to perform a full reset iPhone through a computer using iTunes, you need to follow the step-by-step instructions.

    • Connect the device using a cable to iTunes.
    • Find the iPhone in the list of identified devices.
    • In the window that appears, click “Restore iPhone”.

    Remember that when restoring a smartphone, the process should not be interrupted in any case, since an incorrect completion will lead to the loss of the device’s performance.

    Find iPhone

    This feature determines the location of the device. a useful thing if the owner is worried about the safety of the phone. If you plan to sell your device, then resetting your iPhone to factory settings is not enough; you need to remove the device from the Find My iPhone app. To do this, open the settings menu and go to the iCloud tab. Scroll to the item “Find iPhone”, you need to switch the switch to inactive state. Confirm with your Apple ID password. After that, wait for an e-mail with a confirmation of disabling the function.

    How to Factory Reset iPhone

    Apple device owners regularly look for information on how to reset iPhone settings. This solution is suitable for cases when the phone fails for no apparent reason or before the sale of the device. In the process, errors of the operating platform are removed, if necessary, user files are deleted. There will be nothing complicated in the process, it is important for owners to know how to reset iPhone to factory settings.

    Precautions

    Now, let’s walk you through how to completely reset iPhone and settings. At the beginning of the process, make sure that the smartphone is charged more than 30 percent so that during the reset the device does not run out of power and does not create additional problems. Check if the device is jailbroken. after a reset, the smartphone may freeze on the start screen. The main thing is to save user files in the cloud, write down names and passwords, copy contacts from the phone book. Also, through iTunes, it is worth creating a backup copy of the settings and applications, in order to quickly restore the deleted information later.

    To do this, run the program on your computer, go to the “File” section, open the “Devices” tab and click “Create a backup copy”.

    How To Reset & Restore your Apple iPhone X. Factory Reset

    Reset via Hard Reset

    If factory reset on iPhone did not help, then there is another option for deleting user information. Hard Reset. To do this, hold down the “Home” button and the “Power” button, hold for 10 seconds and wait for the “bitten” logo to appear. For models from the eighth generation, a different principle applies:

    • press the volume up button with a quick movement;
    • also press the volume down key;
    • hold the power button of the device until the Apple logo appears.

    There are no restrictions on the number of hard resets by the manufacturer, so the procedure is performed as needed, including to eliminate errors in software platforms and applications. This method is suitable for restoring a smartphone if after a reset the device freezes on the boot display.

    Smartphone Recovery (Recovery Mode)

    Sometimes factory reset on iPhone causes errors that the smartphone cannot cope with without the help of the owner. For such cases, the device has a built-in recovery mode, to put the phone into Recovery Mode, follow the step-by-step instructions.

    • Disconnect iPhone after charging it 30-50 percent.
    • Press the Home key.
    • Connect your smartphone to your personal computer using a special cable. The Home key must remain in the clamped position.
    • Wait for the iTunes icon and the drawn cable to appear.
    • Launch iTunes on PC and find the connected device.
    • In the window that opens, click the “Restore iPhone” button.
    • Wait for the process to complete.

    Do not disconnect the smartphone from the computer during recovery, otherwise only the masters in the service center will be able to “revive” the smartphone.

    Full hard reset

    Hard reset iPhone is not an easy procedure that completely returns the factory settings to the gadget. It will help in cases where you have forgotten your digital password or pattern, you cannot turn off Find My iPhone. But you still cannot hack the found smartphone. if its owner has activated the search function on the Apple website, then even after a full flashing you will need a password from his Apple ID.

    READ  How to charge iPhone without cord

    Return iPhone to factory settings and unlock the password using Recovery mode:

    • Turn off the device. hold the power key until the shutdown slider appears.
    • Press and hold the “Home” button, at this time connect the device with a cable to the PC.
    • The iTunes icon will appear on the display. you have entered Recovery. Release “Home”.
    • Open iTunes and Run iPhone Reset via Recovery Procedure.

    When finished, disconnect the wire and restart the gadget.

    In case of serious problems with the system, another bootloader mode. DFU will help. In it, a complete reinstallation of the system occurs. There are several options on how to reset and how to reset iPhone to factory settings in DFU mode:

    • Press the shutdown and Home buttons at once, hold them for 10 seconds, press the shutdown button, and hold the Home button until the power-on sound appears.
    • Hold the shutdown button for 3 seconds. Without releasing it, press “Home” for 10 seconds, then release the power.
    • For iPhone 7 and 7: actions as in option 2, only instead of “Home”. the volume down key.

    When you enter DFU mode, the device screen will remain blank, as in a disabled state. Launch iTunes and perform a deep restore, all system parameters will be reset. The process will take about 10 minutes, then you can reactivate the device or upload a backup.

    Cleaning from the device

    The easiest way to clear the settings is on the iPhone. Pre-charge the device to at least 30%, do not erase the content from your jailbroken smartphone in this way. you will get a non-working device. Do not forget to create a backup in iTunes before doing a hard reset. this will help you quickly return all personal data to the device, except for installed applications and music.

    In the menu, open the sub-item “Basic-Reset”.

    You will see several options for the procedure:

    • Reset all settings. all system parameters will return to factory settings, including set alarms and application settings, user content remains. Helps with downed OS parameters.
    • Content and Settings. System settings and all user’s multimedia data are deleted. The device turns out “out of the box”, the method is suitable for pre-sale preparation of the device. just check that the Apple ID profile is logged out.
    • Network. the parameters of connection to cellular networks, Wi-Fi, VPN, their logins and passwords are cleared. Helps with problems with signal reception and data transmission.
    • Keyboard dictionary. clears words entered by the user from the autocorrection list.
    • Home screen. returns the original look of the desktop by arranging the icons of branded applications in their places.
    • Geolocation. removes all software permissions and prohibitions on the use of geolocation information.

    How to Factory Reset iPhone

    It is sometimes useful to clear the inside of your smartphone. especially if it does not work properly at times, you want to sell the gadget, or you recently bought it from your hands. For such cases, Apple has provided several types of cleaning. Let’s figure out how to reset iPhone to factory settings depending on the situation.

    Cleaning through iTunes

    There are two types of factory reset via iTunes for iPhone. updating with a clean firmware or downloading a previously saved copy. Any of them requires sufficient charging of the gadget. at least 70%. The first option will help erase content and settings, you will get a clean device with fresh firmware. The method helps well with major system crashes, freezes and reboots. How to reset iPhone to factory settings via iTunes:

    • Launch iTunes on your computer, connect the gadget with a cable.
    • On the top bar, select the connected device.
    • Open the “Overview” tab, on the right next to the iOS version, click on “Restore”.

    The program will download the latest OS version to iPhone or iPad, restore factory settings.

    If you don’t want to lose all of your personal content, update your iPhone 5, 6, or other model with a pre-made backup. The device will remain in working order, it will be possible to throw off only the changes that were made after the moment of the backup. How to restore a gadget from a copy:

    • In the iTunes menu, open the “File” menu, subsection “Devices” and select the function “Recover from a copy”.
    • Specify the save that you want to use for recovery.

    Hard reset iphone 6s/ 6s plus, SE, 6/ 6 / plus, 5s, 5c,5, 4s,4 (reset to factory settings)

    We recommend that you regularly create working copies of the device, then in case of problems, we can easily reset the latest changes and return a copy to the gadget, where all contacts, photos, notes, messages and iPhone settings are stored.

    ICloud cleaning

    You can reset iPhone via cloud storage, without using a PC. This method is also useful if you need to restore the device after resetting all settings, but there is no backup copy on your computer. Copies to iCloud are created automatically and regularly during the charging of the gadget, if it is connected to Wi-Fi at this time, and you have not turned off the copy function.

    To reset the settings via iCloud in the device menu, first perform “Erase Content” in the “Reset” subsection, then select “Restore from iCloud Copy”.

    We figured out how to delete all user settings and clean up the system. Resetting an iPhone 5s or other model, iPad tablets is easy, the main thing is to carefully follow the instructions. Do not forget to create backup copies of your smartphone, then in case of any malfunctions you will lose a minimum of important information.

    How to Factory Reset iPhone Quickly

    How to reset an iPhone to factory settings, when the phone starts loading for a long time, applications stop turning on and malfunctioning, and you just need to do a factory reset. You can reset them in different ways, but this procedure is not always necessary. Before selling a smartphone, you also need to do all these steps so that your information does not fall into the hands of another user.

    Resetting the settings to Recovery Mode

    You can try a method where your phone is unresponsive or won’t start at all. To reset the settings, you need:

    • Disconnect iPhone in any available way.
    • Hold down the Home button.
    • Connect via USB cable, while holding the “Home” button.
    • You will have a blue circle labeled iTunes. If you do not have it, repeat the procedure.
    • Launch iTunes and make sure the iPhone is now in recovery mode, then confirm the action.

    You can exit the program as follows:

    • Disconnect from the computer by removing the plug from the connector.
    • Turn off the power of the phone using the “Power” button.
    • Use the same button to turn it on.

    The phone should work like new.

    Reset settings on iPhone I can’t sign in I don’t know the Apple ID password

    This is not a problem in this case. The action is easily reversible if the phone is yours. There are two options for solving this problem.

    • By email. (Go to iCloud, after which you need to click “Forgot Apple ID or password?” You will need to fill in the Apple ID field in the field, in short, the mailbox. Click on “Reset by e-mail”. To your mail (which was indicated), a letter will come. Follow the link and in the window that opens, click “Reset password”, then enter a new password.!
    • Answer the questions. Proceed in exactly the same way as with e-mail until the moment where you need to choose a recovery method. Click “Answer Security Questions”. Fill in your date of birth, then answer two security questions. Write a new password and confirm your action. Everything, you changed your password.
    READ  iPhone does not catch the network what to do

    TIP: make sure the email comes from an official Apple address.

    Why reset iPhone settings is dangerous?

    Reset all settings on iPhone, what will happen and how to fix it? You risk losing important personal information, photos, phone contacts. To avoid this, you need a copy of all your files in the iTunes app. This does not require professional knowledge.

    The second option is to copy all your files using iCloud through your personal computer.

    These two options will help you save all your data, which you can restore at any time to your smartphone.

    Apps to reset iPhone to factory settings

    There are many applications that can be installed in a few seconds and you can do a factory reset on your smartphone. Here are the most tested ones:

    • Wondershare Dr.Fone for iOS is a program that can be found freely available on the Internet. In the program, you can select the types of data that you want to reset, and you can also do a full reset by clicking on “System Recovery”.
    • iLEX RAT. the program will help you reset everything to zero in your smartphone when it has accumulated many applications that slow it down. You can uninstall certain types of applications without interacting with iTunes.
    • Semi-Restore for iOS will allow you to restore the current version of iOS, thereby improving the performance of your smartphone. You can download it on the Internet for free access. The interface is very user-friendly and understandable for any user.

    Hard reset

    All iPhones can be restored to factory settings by a so-called “hard reset”. For all models up to and including 6, this is done by pressing the Home and Shutdown buttons for about 15 seconds until the white Apple logo appears on a black background. The following procedure is the same as when you first turn on the device.

    iPhone 7 and 7 plus restart by holding down the power and volume down buttons for at least 10 seconds.

    For Apple phones from model 8 and newer, Hard Reset is done in three stages:

    • quickly press the volume up button;
    • quickly press the volume down button;
    • hold and hold the side button until the white Apple logo appears on the black screen.

    Via iCloud

    This method works on any device: computer, tablet or smartphone.

    • Go to the iCloud.com website.
    • Sign in to your Apple account /
    • The process of resetting the gadget’s settings will begin immediately if it is connected to the Internet, or later, as soon as it appears on the network.

    How to Reset iPhone via iTunes?

    Connect your device to your computer using the original USB cable, and then launch iTunes. When the device is detected by the program, click on the miniature device icon in the upper right corner to open the gadget control menu.

    Make sure you have the Browse tab open in the left pane of the window. At the very top of the window, you will find the “Restore iPhone” button, which will allow you to completely erase your device.

    After starting the recovery procedure, you will need to wait for the end of the process. During recovery, never disconnect iPhone from the computer, otherwise you may seriously disrupt the operation of the device.

    Do I need a backup

    Before erasing all iPhone settings, it is recommended to back up your device if it was not automatically set up to create it. It stores the following information:

    • all device settings;
    • data about installed applications;
    • SMS, MMS and iMessage;
    • display settings and location of programs on it;
    • media files;
    • Health application statistics;
    • purchase history in iTunes, AppStore, etc.
    • contacts.

    When you reset to factory settings, there is no guarantee that this information will never be useful to you, so it’s better to create a backup just in case.

    How to reset iPhone?

    Before you move on to erasing your device, you need to turn off Find My iPhone, without which you won’t be able to erase your iPhone. To do this, open the “Settings” application on your gadget, and then go to the “iCloud” section.

    Scroll down towards the end of the page and open the Find iPhone section.

    Move the toggle switch next to “Find iPhone” to the inactive position.

    You will need to enter your Apple ID password to confirm. After completing this procedure, you can proceed directly to erasing the Apple gadget.

    Reset via the “Settings” menu

    Before you reset the settings on an Apple device, you need to charge it well, preferably up to 100%, and provide access to a stable Wi-Fi connection.

    • If iPhone is paired with watch, you need to stop syncing.
    • Sign out of your iTunes Store, iCloud, and App Store accounts. To do this, open the “Settings” menu, click on the name. At the very bottom of the page that opens, activate the line “Exit”.
    • We return to the “Settings” menu, go to the “General” section, select “Reset”, and then “Erase content and settings”.
    • When the “Find iPhone” function is enabled, you will need to enter a password from “Apple /
    • Enter passwords for accounts on demand.
    • After rebooting the device, enter the data requested by the smartphone.

    Method three, without iTunes (the device turns on)

    You can also do a factory reset on the iPhone itself if you don’t have a computer. But this can only be done if the device turns on.

    To do this, follow these steps:

    • Go to the device menu in the “Settings” “General” “Reset”.
    • Click “Erase Content and Settings“.
    • Enter your device password or Apple ID password to confirm.

    After that, wait for the settings to be erased. The device will be returned to factory condition.

    If your iPhone turns on, we recommend that you back up your data before resetting.

    There comes a time in using Apple gadgets that you want to “clean” it and start using it from scratch. For this there is a function “Reset settings”. We will tell you how to use it below.

    Resetting to factory settings completely clears the memory of the device from information added by the user, returning it to its original state. This is necessary when:

    • pre-sale preparation of the device;
    • numerous experiments with applications and other data;
    • prevention of failures in the firmware.

    If you nevertheless decide to clear the Apple gadget of unnecessary information and configurations, you can do this in one of the following ways.

    Do not try to delete contacts and other information manually, this will delete data from the iCloud cloud storage and make it impossible to recover.

    How to reset iPhone via device settings?

    Open the “Settings” application on the device, and then go to the “General” section.

    At the very end of the window that appears, open the “Reset” section.

    Select Reset Content and Settings. After starting the procedure, you will need to wait about 10-20 minutes until a welcome message appears on the screen.

    Any of these methods will lead to the expected result. We hope the information provided in the article was useful to you.

    Thank the author, share the article on social networks.

    Keep a quick cheat sheet on how to factory reset iPhone. with and without iTunes.

    For a number of reasons, you may need to reset your iPhone to factory settings. In Apple’s terminology, this is called “restoring iPhone”, that is, returning the original settings and setting up the device as new. Read below for three ways to do this.