Reset Data on Android Samsung

Formatting the device (reset) via the Recovery menu

Menu control in Recovery mode is carried out via the volume down button.

  • Select “Wipe data / factory reset
  • Press the Power button to confirm.
  • We agree with the operation (choose Yes. Delete all user data)
  • We confirm the operation.
  • We reboot the phone by selecting the item “Reboot system now”.

Steps to take before formatting your device

There is a kind of checklist of necessary procedures that should be performed before starting the reset.

  • Back up important files on your phone. To avoid confusion and unpredictability, keep a copy of ALL important files on your computer. Otherwise, it will be very difficult to recover data even in hot pursuit.
  • Charge your phone to the maximum. While some Android devices have built-in low battery protection, there are some nasty exceptions. Make sure the battery is fully charged. otherwise it may happen that during the reset, the battery runs out and you turn the phone into a brick.
  • For Android 5.1 and higher. remove the link to your Google account. This is new for relatively older versions of Android. You need to unlink your account before resetting in order not to enter data after resetting. The fact is that if you forget your login information, you will not be able to restore access to the phone (you will need all the documents and a trip to the service center). This is done for security reasons so that attackers cannot take over your phone using the formatting function.

How to format Android through factory settings

The easiest way to reset Android settings, we advise you to use it first.

  • Go to the mobile device menu
  • Go to Settings General Settings.
  • If there is no subsection “General settings”, then go back. The main thing is that there is a section “Archiving (Archiving) and reset” or Confidentiality next to it. In different versions of Android, there may be minor differences in the naming of the settings menu items.
  • Click on “Factory data reset” or “Reset device”.
  • Use the “Reset” item to confirm the formatting.
  • After rebooting, you will have a clean and working mobile device at your disposal, just like after purchase.

What is phone formatting

Hard reset (or reset settings on Android). an extreme measure to restore the original phone settings, provided by the developers.

The factory settings set in Android assume that the mobile device will work stably, predictably. everything as intended by the manufacturer. In case of any error, problems with phones, you can roll back the settings to restore the operating system to the working state.

How to completely format an Android phone: step by step instructions

In this small guide. how to format Android in various ways: from simple to less obvious. Use any of the possible. the result is the same: getting a mobile device in working order. This can be useful for selling a device or getting rid of software bugs.

The instruction will be useful for owners of the following Android smartphones:

  • Lenovo a319, a328, a536, a1000
  • LG p705, e615, d325
  • Sony Xperia
  • Xiaomi Redmi 3 (s),

And here is a special formatting instruction for Samsung and Samsung Duos.

How to format your phone completely via hardware buttons

Full formatting and return to factory version of Android. a magic wand for you in the event that the phone does not turn on (why it does not turn on, it is no longer so important).

Formatting via keys on the phone in the off state:

  • If the phone works, turn it off.
  • Press and hold three buttons at the same time: Power Home (Center) Volume Up.
  • Hold down three buttons on your phone: power button, home button (home is usually on the bezel), and volume up.
  • If there is no “Home” button, then try the option with the power button and volume up.
  • Release the Power button after the screen displays “Samsung Galaxy. “.
  • Hold the rest of the buttons until Recovery appears (about 5-15 seconds).
  • As soon as the logo appears, release the power button (only it, hold the other buttons).
  • The recovery menu should appear. How to format Android through it, read on.

Why format your phone

There are many reasons why a full format and factory reset will make life easier. Here are the most compelling reasons:

  • Android starts to slow down terribly or applications glitch. Although Android works flawlessly, if not messy, sometimes unexplained conflicts and application errors occur when it is impossible to pinpoint the exact cause.
  • Removing unnecessary programs from the phone does not solve the problem in any way.
  • The phone stopped turning on correctly.
  • Through experimentation or carelessness, you made a fatal mistake. In this case, there is nothing left to do but reset the tablet or smartphone through the Recovery menu or the hardware buttons of the phone.
  • Formatting Android. almost the only way to return it from a brick state to a functioning gadget.
  • Problems with unlocking a mobile device. However, we do not recommend formatting your phone if you cannot remember your pattern or password to log in. Before that, we advise you to read the article on how to do it more competently: How to unlock your phone
  • You want to zero your phone for sale. In fact, a factory reset can kill two birds with one stone.
  • You optimize your phone by returning it to its most original condition. If you leave all applications, files, and so on on the phone, there is a risk that the mobile device will lose performance.
  • Formatting deletes all files in the internal memory of the phone, which means you protect yourself from transferring personal data to someone else.
READ  How to factory reset Samsung A8

How to reset Android to factory settings on “Samsung

You can reset the settings to “Samsung” in three different ways:

  • Resetting All Data Through Samsung Settings.
  • Clear phone completely via service code.
  • Factory reset via Recovery.

The first way through the settings is the easiest. It will help you set up your phone in a new way, reset settings and parameters. The sequence of actions is as follows:

  • Select the “Settings” item in the “Menu”.
  • Go to “General settings”. On modern devices, such an item may not exist, then you just need to go to the next item.
  • Select the “Reset” column. It may also be called Backup and Reset, Archive and Reset, and Privacy, depending on the software version.
  • Click “Reset data”.
  • Confirm the selected action by clicking “Reset” or “Delete All”.

After that, the device will automatically reboot. Once enabled, it can be used again, but all data will be deleted.

HOW TO RESET DATA USAGE in Android (No root) 2020

Resetting settings to factory settings via “Settings”

The next option is using the service code. It is considered the fastest because all the user has to do is enter a specific combination. You can return to the factory settings by entering one of the following codes:

  • ###
  • 27673855 #
  • ###

All information from the phone will be deleted.

Factory reset via service code

The third method, using Recovery, is considered the most time consuming. It needs to be disassembled in more detail, since users often have problems with it.

Why do you need to reset the settings to “Samsung

Resetting data on Android Samsung, as well as on other devices, is a complete removal of data and information from the device: contacts, photos, music, messages, applications. absolutely everything will be deleted. Upon completion, the device resembles a new device, everything in it will have to be done from the very beginning.

When can a data reset on Android Samsung come in handy:

  • if recently the device constantly freezes, overheats, reboots. Most likely, there are problems and errors in it, which over time can lead to breakdowns;
  • if the antivirus program has detected extraneous software systems, viruses and spyware that cannot be removed the first time using standard tools;
  • if the user wants to sell the device. Then the complete removal of information will help preserve personal personal data, avoid fraud;
  • if the software (firmware) of the device was changed at the service center.

Note! As already mentioned, returning to the basic settings will lead to the complete destruction of information and any data stored on the device.

Before starting the refund process, you must:

  • Save all the necessary information, documents, contacts, media data. This can be done by simply transferring it to a personal computer via a USB cable or to an SD memory card. Another option is to use cloud storage.
  • Delete all passwords in the browser, untie bank cards, log out of Google and Yandex accounts.

After completing these steps, you can do a factory reset on Android “Samsung”.

Hard reset Samsung smartphone via key combinations

Another way to clean your device is to use buttons. This method is carried out using Recovery. a special boot mode of the device, reminiscent of a text menu. Certain combinations allow you to open Task Manager, which cannot be found in normal settings.

Note! This method is usually used when the device freezes or stops turning on. For a regular update, data reset, it is better to use the methods described above.

How to Hard Reset Android Samsung? To begin with, turn off your mobile device, if it is turned on. Then you need to hold down certain key combinations:

  • “Home” volume key “Volume up” button “Lock screen”;
  • If your mobile device has a Bixby key: Volume button Turn Sound Lock Screen Bixby.
  • for older mobile phones: volume key “Volume up” button “Lock screen”.

Factory reset via keyboard shortcut

After holding down, a dialog box will open where the user will be asked to select the next command:

  • Select the line “Wipe data / factory reset”.
  • Press the “Lock Screen” button once to confirm the action.
  • Use the volume key to select the item “Yes” or “Yes. Delete all user data”.
  • Confirm the action with the “Lock screen” key.
  • The data from the device will be deleted. The text menu returns to the screen.
  • Select with the volume keys the line “Reboot system now” and confirm the action with the button “Lock screen”.

Important! The device should reboot, restore work. If this does not happen, you need to contact the service center specialists. Most likely, a replacement of component parts or a new firmware is required.

How to Factory Reset Android on Samsung

Probably not a single person has encountered such a problem: the new device flies, the data download speed is indeed a few seconds. But the more the device is, the worse its performance. Constant glitches, freezes and errors annoy users. Experts offer various solutions to this problem. One of them is a factory reset. It is believed that clearing the information completely will help the device perform better. How to Factory Reset Android on Samsung? This article is about this.

READ  How to create a new account on Samsung

Performing a Hard Reset on older versions of Samsung Galaxy

There are several ways to reset your Android device, as already mentioned. But not all of them may be suitable for older versions of Samsung Galaxy. In this case, experts recommend cleaning using a computer. To do this, you need to install the Android System Development Kit program. It is available for download in the public domain on the developer’s website.

The sequence of actions is as follows:

  • Enable the “USB Debugging” function on the device. To do this, go to “Settings”, select the column “For developers”. “USB settings”. “General”. “About phone”. “Information programs”.
  • A list of devices and drivers will open. Opposite each one must be ticked. This is necessary for the device to be able to connect with a personal computer.
  • In order for a personal computer to see a smartphone or other device, it is necessary to download drivers for it. They are also available on the developer’s site.
  • Connect the device using a USB cable to the computer.
  • Run the command line, write the following query in it: “C: \ Users \ Username \ AppData \ Local \ Android \ Android-SDK \ platform tools”.
  • Enter ADB reboot into Recovery.

The device will reboot and be ready for use again.

Samsung Factory Data Reset Tutorial

Factory reset is a good way to optimize device performance and make it faster. This is especially important for smartphones and tablets that have more than two to three years of service life. Such an update will not only fix many errors, but also increase the operating time. the phone will last longer.

Google drive

If you have not installed Google Drive, you can go to Google Play and download this application for free. If you already have it on your Android smartphone, then you can mark all the files you need. photos, videos, other documents, and save them to Google Drive or even share access to them. You can easily make the desired backup, but no more than 5GB.

Save your files (photos, videos, documents).

You need to make sure that all your data you want is not only stored on your phone. There are several places where your data can be stored and there are several ways to make backups. You can:

How to reset Android smartphone without losing important files and data

If you are having problems with your Android smartphone, resetting your settings and data can help, as we have already covered in detail, so you can find the necessary article with detailed instructions on our website. But resetting to factory settings means that your smartphone will delete all information and all applications with settings in the process, and as a result, you will have the device in your hands as it was right from the factory. Of course, you have information on your Android phone that you would not like to part with. Below are the ways to save the data you need.

Store data on SD card

You should always remember that a MicroSD card in your phone can always do a good job, and therefore I always advise you to take a larger card (how many the smartphone supports). The procedure for saving information to the SD card varies depending on the phone used. However, there is a universal way for Android smartphones. your photos and videos are usually stored in the DCIM folder. Finding them is very simple: open the application menu, select “My Files” (or any other file manager) and use it to open the DCIM folder. Surely there is an option for copying files. use it and transfer the necessary photos and videos to the SD card. In the same way, you can copy all the necessary files to your card.

Make a backup on your computer

As soon as you connect your phone to your computer with a USB cable, your computer will recognize it. A dialog box will open on the screen and in it you need to select the “Open folder to view files” item. You will see all the available information and here you can also find the DCIM folder, where you will find your videos and photos. You can also copy other files you need to your computer.

Saving contacts.

When you open the list of your contacts on the phone, there is an option “Export contacts” in the menu and the list will appear immediately. Select the one you want and you can save a backup of your contacts either on an SD card or via USB. You can also select all your contacts and share them to Gmail or any other email account. However, Google automatically backs up your contacts if you are using an Android smartphone.

If the device does not turn on after a reset, a Google account is required

Starting with version 5.1, Google has implemented anti-theft protection in Android. Google FRP. If you do a data reset, and do not delete your Google account before doing this, the device will be locked. When turned on, you will be asked for the account that was on the device before the reset, and the password from it. To turn on the device, enter the Google account that was on it before the reset.

If you do not remember which account was on the device before the reset, contact a Samsung service center. Be sure to take with you documents confirming the purchase (check, completed warranty card, loan agreement). If there are no documents, you cannot unlock the device.

What is a factory reset and when to apply it

Factory reset or hard reset of any mobile gadget on Android (not only Samsung Galaxy) is clearing its permanent memory from all applications, settings and files, except for those installed by the manufacturer.

reset, data, android, samsung

The reset function is intended for:

  • Restoring the device to operability in case of software problems and malware infection, when the failure cannot be eliminated by milder methods.
  • Preparing a gadget for sale or transfer to another user.
  • Optimizations after firmware update.

After a hard reset, no user data remains on the smartphone, except for those stored on the removable memory card and SIM (contacts). However, in some cases, the changes made by the user are still saved. Namely:

READ  How to turn on digital TV on a Samsung TV

HOW TO FACTORY RESET a SAMSUNG GALAXY PHONE

  • If, before the rollback, the device was root. Preinstalled applications removed with superuser rights are not restored after a reset.
  • When FRP (Factory Reset Protection) is activated. enhanced protection of the owner’s data in case of loss or theft of the phone.

A device with FRP enabled, even after a hard reset, will ask for a user account password, without which access to the system is impossible. Therefore, it is completely pointless to rollback on such a device in order to delete a forgotten password.

How to reset Samsung to factory settings

Many of us are happy owners of Samsung phones. High-quality, durable, functional. they have been popular for many years, serving their owners faithfully. But there comes a time when they start to fail and fail, and then an effective solution to restore their functionality is to reset the device settings. How can this be done? Below we will analyze in what ways you can reset your Samsung smartphone to factory settings. And also what is the procedure for implementing this operation.

The second way to reset data is by using the buttons

This method is used when the smartphone or tablet does not turn on, or the screen is locked.

If Recovery does not appear, repeat steps 1-3 again, holding the buttons longer.

Service code in the dialer

This cleaning method is possible using the Samsung Service Tag. It works only on some devices, and it also affects the contents of memory cards, so we recommend removing the USB flash drive from the phone before use.

    Open your device’s dialer app (preferably standard, but most third-party apps work as well).

27673855 # The device will immediately start the reset process, and after it will reboot.

The method is extremely simple, but fraught with danger, since no warning or confirmation of the reset is provided.

Summing up, we note that the process of factory resetting Samsung phones is not much different from other smartphones on Android. In addition to those described above, there are more exotic reset methods, but most ordinary users do not need them.

Thank the author, share the article on social networks.

Preparing for a hard reset

Before proceeding with restoring a mobile gadget to factory settings, if the situation permits, copy all important information from it to external media, for example, to a computer hard drive or to the cloud.

It is convenient to save contacts on the Google service of the same name. To do this, copy them from SIM cards to the phone memory and log in to the device under the Google account to which you want to transfer them. Synchronization will take place automatically.

If this is not possible, install a cloud service client on your mobile device, for example, Google Drive or Yandex.Disk, enter the “Files” section, click “Upload to disk” and select the data to save.

reset, data, android, samsung

To avoid having to enter the owner’s login and password when starting the device after the reset, delete your Google account from the system.

Immediately before recovery, charge the device to at least 25-30% or connect to a power source, and also remove the memory card and SIM from it.

Reset data on Android Samsung what will happen

Modern smartphone on Andro

The second way to reset data is by using the buttons

This method is used when the smartphone or tablet does not turn on, or the screen is locked.

If your device has a Home button (bottom center), simultaneously press and hold the Power Home buttons Volume Up.

If your device has a Bixby button (on the left below the volume buttons), simultaneously press and hold the Power Volume Up Bixby buttons.

If your device does not have Home and Bixby buttons, press and hold the Power Volume Up buttons at the same time.

Release the Power button after the screen displays “Samsung Galaxy. “. Hold the rest of the buttons until Recovery appears (about 5-15 seconds). Recovery. a special boot mode for the device, looks like a text menu.

reset, data, android, samsung

If Recovery does not appear, repeat steps 1-3 one more time while holding down the buttons.

Press the “Volume Down” button to select “Wipe data / factory reset”.

Press the “Power” button to confirm the selected item.

Press the “Volume Down” button to select “Yes” or “Yes. Delete all user data”.

Press the “Power” button to confirm deletion of all data from the device.

After deleting the data, the main menu will appear. Press the “Power” button to select “Reboot system now”.

Copy important information from your device.

During the reset, the device memory will be cleared and all data will be deleted. If there is any important data, make a copy of it.

Via the system menu

This method is preferable when the device boots up and works more or less normally, that is, you have access to the system menu and all on-screen buttons.

  • Open the system settings utility and go to the “General” section. Some Samsung models do not have this section. If this is your case, proceed to the next step.
  • Tap the “Reset” button or its equivalent. “Privacy”, “Archiving (archiving) and reset”.
  • Go to “Reset device (data)”.
  • Click “Delete All” or “Reset“.

After a few seconds, the device will restart in a zeroed state.

The first way to reset data is through the menu

Select “General Settings”. If there is no such item, go to the next step.

Select “Reset”. It can also be called “Archive and Reset”, “Archive and Reset” or “Privacy”.

Select “Factory data reset” or “Reset device”.

Select “Reset”, “Reset Device” or “Remove All”.

The device will reboot and the data will be deleted.