LG TV Channels Are Not Tuned What To Do

Table of Contents

Option 2. Automatic search (Pay TV)

  • It is necessary to purchase a module with an access card from a satellite TV provider (NTV Plus, Tricolor). Register it.
  • Insert the purchased module into the slot of the receiver or TV.
  • In the “Autosearch” section, select the required operator, press the “OK” button.
  • The rest of the steps are identical to the first option.
  • After the operation, all encrypted TV will be unlocked, an image will appear.

Digital TV

There are two methods to tune digital channels on LG TVs. The first is suitable for all receivers, the second is for plasma panels with the Smart option.

Method number 1

  • On the operator’s website, find out the necessary parameters for setting.
  • Section “MENU”.
  • Include the item “CABLE TELEVISION”, you should be aware that new receivers may not have such an item.
  • Go to the “Manual settings” tab.
  • A window will appear where you need to drive in the required parameters.
  • The search will begin, after which the subscriber will have access to free digital television.

LG TV Channels Are Not Tuned What To Do

Option 1: automatic search

If the user wants to view only free satellite programs, then in this case LG setup is performed as follows.

  • A tuner is connected to the LG screen to receive the signal, it is best to use the HDMI connector. If the screen is already equipped with a built-in receiver, then the connecting cord is connected to the corresponding connector on the panel.
  • Section “MENU”.
  • Item “Channels”. select “Satellite” as a signal source and press the “OK” button on the remote control.
  • Section “SATELLITE SETTING”, confirm the required satellite, then press the “OK” button.
  • Go to the section “Automatic search”, set a command to scan channels.
  • Completed satellite channel setup.

How to tune digital and satellite channels on LG TVs

How to tune channels on LG TVs yourself is one of the frequently asked questions from users. There are different ways how to tune channels on receivers of this brand, it depends on the type of TV (LCD, Smart, LCD, plasma panel), as well as on which TV format the user chooses (Satellite TV, digital TV, cable TV).

How to turn off auto-update

All LG panels have an auto-update option if it is in enabled mode. Then periodically all installed channels will be reset, so that this does not happen, it is recommended to disable this option.

  • Device menu.
  • Setting item.
  • Digital cable.
  • Turn off function.

Method number 2

You can tune digital TV channels on smart LV screens using the following instructions:

  • Press the “HOME” button on the remote control.
  • Go to the “SETTINGS” tab.
  • Section “OPTIONS”. Here you need to select a country. If the model was produced later than 2011, then you need to choose RUSSIA, if earlier, then experts recommend choosing Finland or Germany.
  • When choosing European countries, do not forget to change the language to “RUSSIAN”, this option is available in the “LANGUAGES” tab.
  • Go to the “TINCTIONS” again, set the “AUTO SEARCH” command.
  • A window will appear where you need to select the signal type “CABLE”. If the window does not appear, then this means that the wrong country has been selected, you need to set the required country.
  • If everything is done correctly, then set the fast scan command and drive in the following data: frequency n. 274,000, frequency k. 770,000, modulation. 256, ID. auto.
  • After this manipulation, the screen will require you to enter additional information. To confirm, click the checkbox: digital TV only. the device will search for DTV and analogue channels; autonomy. self-setting of numbering will occur; skipping encrypted programs. paid programs will not be configured;
  • Start scanning, in 20 minutes all TV channels will be found.
  • Complete digital channel setup on LG TVs.

These are the basic options on how to set up digital TV on LG TVs. Also read how to set up Smart TV for equipment of this brand.

Satellite TV

Several options are also used to install satellite television.

TV set up can be done using automatic and manual method.

Option 3. Manual search

This method is usually used if the satellite parameters have changed or if the default settings do not match the selected connection type.

  • In the menu, select “Satellite Settings” here you need to set the desired parameters of the transponder and convector (this information can be obtained from the company providing TV services).
  • Start scanning on new data.

These are the basic ways to tune channels on your LG TV. In 90% of cases, the user independently copes with this task. If you cannot complete the installation yourself. You should make sure that all the elements are connected correctly, try to perform the actions again strictly following the instructions.

If repeated actions did not bring any result, it is recommended to call the wizard, perhaps equipment repair is required.

LG TV Digital Channels: General Connection Rules

Almost all LCD TVs have a built-in digital T2 module. Therefore, there is no need to purchase a separate set-top box. Accordingly, the whole setup will be much faster.

What to do if you have problems setting up your LG TV

If difficulties arise, first of all, it is necessary to repeat the settings. Sometimes you have to call the master. Equipment may need to be repaired. During setup and operation, the following problems may occur.

Before adjusting, it is important to choose the right picture parameters

On older models

Previous generation LG devices have automatic search capability. But many users use just manual. The main thing is to choose the right frequency range. The viewer must perform several sequential actions:

  • Start the TV and go to the “Channels” menu.
  • Select the item “manual tuning”, then determine the frequency and type of signal.
  • Press the “Start” or “Start” button. After the search for each program is completed, a notification will appear on the screen.
  • After that, you must continue the search procedure.
READ  How To Connect Bluetooth To LG TV

In this situation, there will be only those programs whose signal type corresponds to the entered settings.

Location, date and time settings

The choice of the country in which the TV is used is important. This helps to register the product for official use and to select the correct list of TV programs and signals.

  • The remote control is used for these purposes. You should do all the same steps from 1 to 3 points of the previous section.
  • Next, go to the “Country” tab.
  • In the list that appears, we search for the state in which we are, then press the “Exit” button.
  • To correctly set the date and time, you should follow the steps as in the previous case, only in the “General” tab you need to open the “Date and Time” section.

Please note, there are two types of setting times on LG TV

The correct operation of the software depends on how correct the time setting is. In some cases, malfunctions may occur: the TV signal stops or the connection to the wireless connection disappears.


In the case of the timer and stopwatch settings, everything is done individually. Therefore, it is not necessary to specially set the time period, this can be done directly during the operation of the TV.

Automatic tuning of digital and analogue channels

Each TV is equipped with an “Autosearch” function. Through it, it is easiest to perform all sorts of manipulations to install channels on Smart-TV. As a result, not only digital but also analogue programs will be found, if there is a corresponding signal. This method is popular with those who are easily confused in the settings.

Autosearch function saves the user from entering received signal data

All that needs to be done is to enter the main menu, then, SIMply select the item “Automatic setting of programs”. After these operations, you need to wait a few minutes until the entire scale reaches 100%, after which you can assign an individual number to each found channel.

Free satellite auto tuning

To search for free programs, on the TV you need to perform a step-by-step aLGorithm:

  • A special set-top box is purchased that connects to the HDMI output on the TV.
  • If the TV model has a built-in receiver, then the satellite dish plug is connected directly to the output of the connector.
  • Go to the “Menu” item, visit the “Channels” subsection.
  • In the next window, click on the source, choosing “Satellite”, start the process by pressing the “OK” button.
  • In the “Satellite settings” section, be sure to select the option for the search. Only suitable when multiple plates are installed.
  • Click on the “Automatic search” button and wait for the TV signal to complete the operation.

When choosing a satellite, it is important to check the box correctly to save the channel parameters

As a result, the programs will be displayed in the corresponding section of the operating system.


It is better to configure programs when the Internet is off so that there is no signal loss. Internet connection is required only when searching for IPTV channels.

Disable auto-update

Any Smart-TV, including LG, has an option to auto-update software and the operating system as a whole. When updated regularly, all configured programs will be reset. To avoid constantly searching for them, you should disable this option:

  • We go to the “Settings” of the TV, select the item “Digital” or “Digital cable”.
  • Click “Disable auto-update”.

However, several times a year, the developers recommend starting this process. The operating system may become outdated and, in the future, may not accept the installation of some applications. Or it may even refuse to play in new formats.

Interface language options

It is important to initially choose the correct language design, both for the keyboard and for voice search, which is available on almost all LG models. In addition, the language in which the channels will be broadcast depends on these settings. To accurately specify parameters, follow the step-by-step aLGorithm:

  • We connect the TV to the electrical network, then we start it using the remote control (remote control). We wait a few seconds until the device is fully loaded, then press the “Home” button. She can be depicted as a “House”.
  • Open the “Settings” section in the internal TV menu, select the “Advanced” sub-item. On the screen it looks like a “Three Dots”.
  • A set of tabs appears. Of these, you should choose only “General”.
  • Open the “Language” section. We carefully review here so that everything is in Russian.

The interface language setting can be changed at any convenient time

If, when you turn on the TV, all steps are performed in Russian, this does not mean that the TV is already fully configured. It may be necessary to change the interface language for searching on the Internet or within the software.

Setting up SMART on LG

In the absence of access to traditional analogue or digital channels, the owner can use IPTV television.

In order to set up Internet TV on Smart TVs, you need to carefully approach each item.

This list of programs is subject to editing and replacement. However, you can take new Playlists only on the official resource.


Antenna misalignment is considered a common problem. Go to the official website. www SIM card.rtrs.rf /. In the search box, enter your place of residence and see the location of the nearest TV towers. Point the antenna towards the repeater.

Also, do not use indoor type antennas for picking up “numbers”. Otherwise, the image will ripple, drop out, or poor quality. Also, look for interference such as tall trees, buildings, etc. You may need to place it a little higher.

Why LG TV won’t find terrestrial digital channels: reasons why?

In 2020, a TV is available in every apartment. If earlier SIMple devices were popular, now models with Smart TV technology are mainly used. But, sometimes the technique in question fails. What should I do if my LG TV cannot find digital channels? In the article, we will study the procedure for searching for TV broadcasts, consider common mistakes and solutions.

Software crashes

Often times, a system crash occurs because of the users themselves. Why? Usually, incorrectly specified parameters are to blame. For example, an incorrect frequency has been entered, or the installed software in the receiver is no longer supported by the developer and now does not receive the necessary updates. In this case, you will need to reinstall the software.

Resetting the parameters to the factory settings can also eliminate the system failure. In the settings, select the appropriate item and wait for the system to complete the procedure. After reset, you will need to search for channels again.

Why LG TV can’t find digital channels

If LG TV does not catch digital TV, then pay attention to the main reasons. Below we will examine the problems due to which the device cannot find channels. Some of them are associated with software errors, but the main reason is the location of the antenna.

Hardware connection problem

Incorrect equipment connection is one of the common problems. Before carrying out the adjustment, make sure that the equipment is connected correctly. For example, a decimeter antenna, which immediately implies a built-in amplifier for improved signal reception, is connected first to the receiver, and then to the TV. And in the presence of cable TV, the wire is connected to a specific input of the receiver.

READ  How To Turn On The Screen On LG TV


The equipment is connected first. Make sure you have followed this procedure correctly. Also check if it supports the required DVB-T2 broadcast format. Previously, this standard was not available, it was borrowed from Europe, and is used for watching digital TV. Outdated equipment will not be able to receive the desired DVB signal.

Transmitter technical problems

The next reason is on the transmitter side. The lack of signal can be corrected in two ways:

  • If using cable TV, use a multimeter and check all the contacts, right down to the shield. You may need to contact a company to fix the problem that maintains your home and provides access to television.
  • Do you use satellite or terrestrial television? Contact your provider. Probably, planned technical work is underway or an accident has occurred due to weather conditions, which is already being corrected by specialists. Visit the official website of the operator, usually there they always update information and notify customers about preventive maintenance.


Does the device only detect analogue channels? Check cable and inputs for continuity. If the TV set does not find broadcasts, then first of all you need to check the cables. Everything is good? We look at the following reasons.

If you have any questions or complaints. let us know

Checking hardware capabilities

Owners of new TVs equipped with a digital DVB T2 tuner can watch broadcasts in a modern format without resorting to additional equipment. Other TV viewers need to connect a set-top box with a SIMilar decoder to receive ECTV on their TV.

You can verify the technical capabilities of your TV receiver in the following ways:

  • refer to the TV documentation and clarify which formats are supported by the device;
  • search for the necessary information on a specific TV model on the manufacturer’s official website.

Why does the TV not pick up channels

New technologies make it possible to view central digital television in high quality. With the TV tuner T2, even analog models acquire contrast, clarity of contour and depth of colors. Watching digital channels is possible on TVs of different generations: modern ones are presented with a built-in tuner and allow you to control the equipment with one remote control panel. But it is not always possible to tune equipment for digital broadcasting. Consider situations in which the TV does not find channels.

Correct connection

There are models of TV receivers and set-top boxes equipped with two different antenna jacks: for receiving terrestrial and satellite signals. For such devices, the correct connection to the signal source is important. We check that the cable from the all-wave terrestrial antenna is connected to the appropriate connector.

The set-top box is connected to the TV using an HDMI cable or tulips. Check that the physical connection is correct and that the correct port is selected on the TV. If you find any shortcomings, you should correct the connection, select the desired signal source (Source button on the remote control).

Reasons for the lack of digital television and how to fix errors

If the automatic start fails to find digital channels, errors may have been made. Why can’t the TV find digital channels when tuning? This is the most frequently asked question from users when trying to set up a modern TV with many built-in features. Let’s consider the main causes of the problem and how to solve them.

ALGorithm for tuning digital channels

Regardless of the type of TV, the frequency setting is done according to the same scheme. What’s in the modern Samsung model, what’s in old devices. the principle of action is almost identical. First of all, there must be an appropriate antenna capable of receiving the signal of a TV tower broadcasting digital television. If the device picks up a signal, the adapter will offer to add it to the menu. After connecting it to the receiver, the setting will be carried out as follows.

  • You need to open the “Broadcast” settings menu.
  • Select automatic search.
  • Press the “Start” button.
  • The software will ask you to decide on the choice of the signal source: antenna or cable. The latter is selected if there is a cable TV broadcast.
  • When connecting the antenna, the device will offer to select a sub-directory of analog or digital channels, or you can configure a complete list, including both.
  • The last step is to run a “scan”.

If the TV does not pick up channels, you can use alternative methods of connecting digital frequencies using a cable or satellite box. To search in the first way, you need to connect the cable TV wire to the antenna connector. In the settings, by selecting the autosearch menu, a new window will appear. If you need to connect digital television, you must choose not cable TV, but “other operators”. In the presetting of cable TV, click the “Full” item, which will allow you to select the search for digital channels only. Using the control panel, you can sort the channels, and put them in the desired positions.

On the receiver, the RF OUT jack

Using satellite equipment, the connection is made with two types of cable. For these purposes, a high-frequency cable is connected to the antenna, connected to the receiver via the RF OUT jack. After connecting, you can connect the equipment to the network and start autosearch of channels on the receiver. The search will end when no signal appears. The receiver is connected to the TV set with a low-frequency “tulip” cable and the mode is switched on. Then, through the menu with the sections “quality” and “signal strength”, you can adjust the dish. If the connection was made correctly, the channels found will be played back without interference.

Timeliness of software updates

Outdated software of the receiving equipment may be the cause of problems with setting up multiplex reception. On modern Smart TVs, the software is updated via the Internet, and if the TV does not catch digital channels, then you should check the update and run an automatic update.

The software of the set-top box with a DVB T2 tuner may also work incorrectly, which causes problems with the reception of digital signals. Installing a software update resolves the problem. On thematic forums and in the instructions for a specific model, you can get information on how to flash a TV set-top box.

Setting the signal quality from the antenna

Problems with missing digital channels may be related to antenna alignment. Fault diagnosis is carried out step by step.

  • Check the condition of the connecting cable and contacts. If you find cable jams, damaged areas and poor connection, you should fix the shortcomings.
  • Verify that the signal amplifier is working properly by test tuning the radio and TV signals.
  • Adjust the position of the antenna with small turns to achieve the best signal strength and quality indicators. 70% and above.

If all the hardware elements are present and the connection is correct, the digital channels will be set up without problems using the settings menu sections. The tuning aLGorithm for specific brands is given in detail in articles about Samsung and Philips TVs.

READ  LG TV how to tune channels manually

Why LG Smart TV freezes

If you do not know why LG Smart TV freezes, then you need to analyze what appears on the screen.
If you pay attention to the main reasons, then they can be highlighted in the following points:

  • antenna malfunction;
  • slow Internet;
  • incorrect network connection;
  • old firmware;
  • incorrect setting.

When viewing channels, antenna malfunctions sometimes occur. Problems with the Internet (when starting the browser and the sudden absence of a picture) are formed due to a weak signal or incorrect connection. It is not uncommon for Wi-Fi to fail or due to outdated firmware.

Internet and its connection

If the TV is connected to the network, then the lack of signal may be due to Internet problems. See that the necessary cables are tightly connected, the services are paid. If “No Signal” appears on the screen, restart the router, wait a while and try again.

The remote does not respond

Sometimes the lack of response to the remote control indicates a malfunction of the remote control. Try to replace the batteries and repeat the steps.

If you have any questions or complaints. let us know

Freezes and reboots

If you cannot operate the remote control (the indicator flashes, but the TV does not respond to pressing the button), then restart both the tuner and TV. Especially if TV is trying to do it on its own. To do this, remove the TV plug from the socket, wait a while and then turn it on again. It is recommended to do the same with the prefix. Wait at least 5 minutes. If this method did not solve the problem, you need to look for new ways.

What to do if LG Smart TV slows down ?

The boot uses standard solutions to the problem. Read more about this below.

Software Update

If after turning on the TV, the indicator works, but the device does not respond to the remote control (with new batteries and no mechanical damage), then most likely the firmware is outdated. If the device is connected to a network, then correct the problem by opening the settings. Smart TV uses Webos. an embedded open source OS that runs on the Linux kernel.

If there is no network access, then go to the manufacturer’s website and make sure that there is a new firmware. Upon its appearance, follow these steps:

  • download the firmware to your PC (laptop);
  • transfer the file to a USB flash drive;
  • connect to TV;
  • update the software;

Further, for convenient use of the capabilities of Smart TV Samsung, Philips, Sony, it is recommended to download Forkplayer. an application for quickly finding movies, programs and series.

Why LG Smart TV slows down: reasons what to do?

Why does LG Smart TV slow down? an urgent question for those who are faced with Internet glitches when watching movies and TV series, TV programs online. As a rule, problems such as absence and sound are quickly corrected by the user. Read how to do this in this article.

Slows down the Internet on LG Smart TV

If LG Smart TV slows down, then for the Internet to work correctly, you need to follow SIMple steps:

  • connect a router;
  • open the “Menu”;
  • select the connection “Via Wi-Fi”;
  • enter username and password.

The device will connect instantly. If something is done incorrectly, the message “Cannot get network settings” will be displayed. Then B is best to update the firmware for your router.

Problems may occur with the network cable. The solution to this problem depends on the provider. Call the master at home or get advice by phone. Internet won’t appear if you just plug in the cable.


The reboot will allow you to update the information on the TV and the set-top box, especially if the connection was interrupted suddenly. negative weather conditions, repair work from the side of the channel, etc.

LG TVs are among the most popular in the world, because TVs from this manufacturer have many different functions, and most importantly, they have a good quality product. Modern LG TVs have a Smart TV function that allows you to connect your TV to the Internet, thereby using popular applications.

In order to watch digital TV channels, you need to configure the TV, because this year almost all residents of Russia have access to twenty free digital channels. To view them, you need to take a few steps following the instructions below.

Setting up digital TV. The easiest way to tune in all available channels is to use the automatic TV setup.

  • First, connect the TV cable to the antenna input.
  • Next, you need to enter the settings menu of your TV, for this we press the Setting button, if you have Smart TV we press Smart
  • We find the item Settings, usually it is located at the bottom of the screen.
  • Next, in the settings menu, find the Channels item and press ok.
  • Select the Auto setup item to automatically search for channels on the TV.
  • Next, you need to select the signal source Cable TV, Antenna, Satellite.
  • If you are connected to a cable operator, then select Cable TV to watch digital television.
  • Select the Antenna mode if you have an indoor antenna or a collective antenna that is installed on the roof of your apartment building.
  • The satellite must be selected if you connect a satellite dish to your TV.
  • After selecting the Cable TV signal source, you will be prompted to select the cable TV operator from the list, if your operator is not there, select Others.
  • Next, you will need to select the type of channel setup Fast, Network, Full. It is advisable to select the full one, so it will scan all frequencies and find all TV channels on your LG TV, the same is in quick setup
  • Next, in the next menu, you need to select Only digital channels to search for digital channels on the TV, if you need analog channels, then do not check the Only digital channels.
  • Click on Run and wait for Autotuning to complete.

Depending on your LG TV model. the settings interface may differ, albeit slightly, but the basic settings are identical, just follow the instructions and you can set up your TV to receive digital television.

It may seem to you that it will be difficult to tune the TV channels, and for more precise tuning, you can always read the instructions for your TV.

In the Instructions you will find all the information to fully set up your LG TV.

If you are unable to tune the digital channels of the cable operator or the channels are noisy, then check if you have correctly connected everything to your TV, check the plug, if the cable is damaged. If you have several TVs, then check the splitter, if you still cannot eliminate the interference on your own, then you can call the employees of the cable operator and they will help you eliminate the interference on the TV.