Is it possible to connect the system unit to a TV

How to connect a computer to a TV via HDMI?

Most modern LCD TVs are equipped with various interfaces for connecting other devices. An HDMI interface is found on almost every LCD panel. Thanks to the HDMI connector, you can connect a DVD player, a satellite dish receiver, a computer and various mobile devices, such as a tablet, smartphone or mini-computer, to the TV. But most of the users do not know how to connect a computer to a TV via HDMI. If you are faced with the problem of “correct” connection of the computer to the TV, then this article will help you solve it.

The first step is to find out if your computer’s system unit has an HDMI connector. For connecting two devices via HDMI, in our case a computer and a TV, an HDMI interface is required in each device. This connector is located in the video card of your computer and allows you to transfer video and sound over a single cable. Thus, unlike VGA, HDMI has no problem with audio transmission. The HDMI connector in the video card looks like this:

possible, connect, system, unit

The interface is always located on the back of the system unit. As for the HDMI connector in the TV, it can be located both on the back of the case and on the side. over, the TV may have several connectors that are designed to connect various devices.

The diagram for connecting a computer to a TV looks like this: turn off both devices, insert one end of the cable into the TV, and the other into the HDMI connector on the computer.

After connecting the TV to the computer, turn on the LCD panel, open the settings and set the HDMI input as a signal source.

Then we turn on the computer and wait for the system to boot. As a rule, the image on the TV should appear at this very moment. If there is no image, then right-click on the desktop after loading the system and select the “Screen Resolution” tab. In the line “Screen” select the LCD panel, click “Apply” and “Ok”.

In this way, you can connect your computer to your TV via HDMI on Windows 7/8/10. But what if your video card doesn’t have an HDMI interface? Typically, every video card has a DVI connector. There are special cables and adapters of the DVI-HDMI type on sale, with which you can connect an LCD TV to the computer system unit.

If the image on the TV is of poor quality or cropped, then in the settings of the video card you can always set the necessary values ​​of the resolution and image quality. When buying a cable, you should not save money, since often problems arise with cheap HDMI cables: sound is not transmitted, picture quality deteriorates, data transfer stops.

How to connect a computer to a TV

Sometimes it becomes necessary to connect your computer to the TV. There can be many reasons for this desire: maybe you want to use your system unit instead of a DVD-player and watch movies in good quality on a widescreen TV with a large diagonal. I know people who generally bought some system units, and instead of a monitor, they temporarily used just TVs.

On the body itself, there is nothing complicated in connecting the system unit to the TV and there is nothing special to paint for a long time. You just need to remember one simple rule: think of the TV as a monitor and that’s it. You probably quickly learned how to connect the monitor to the system unit, you will just as quickly master the TV.

The main task here is to deal with the interfaces, or simply “what wiring and where to insert.” There is nothing complicated here either, the main thing is to look at the available connectors on your video card, find the appropriate ones on the TV and connect them with a cable. After that, the system unit starts up and the TV turns on. Instead of desktop shortcuts, you may immediately start showing TV programs. Personally on my TV this is controlled by pressing the source button, on some TVs it is the av button. In general, just like you turn on a regular DVD player on the remote control, turn on the desktop image in the same way. After that, you can work behind the TV, as with a regular monitor.

I took a photo of the side panel of my TV that I bought 3 years ago and let’s see what interfaces are there:

Looking from top to bottom, it is HDMI, VGA, Video.

As you can see, the VGA interface is the interface for connecting an ordinary simple monitor to the video card of your computer.

State-of-the-art HDMI interface that maintains high image quality and also carries sound.

By the way, there is a DVI interface very similar to it in terms of functionality and quality. The only difference is that the sound is transmitted there via a separate cable:

The usual Video connector, which is, perhaps, on any digital equipment, the quality of the video there, of course, leaves much to be desired. We are accustomed to referring to tekers, which connect such interfaces with “tulips”:

There is also a similar S-Video connector with slightly better picture quality:

We can very often observe VGA, Video, S-Video, DVI on video cards, so there will be no problems when connecting a computer to a TV. As a last resort, you can use an adapter like this:

You can also read about how to connect a laptop to a TV. The principle remains the same, but you can learn something new for yourself.

Connecting the TV to a computer

When connecting a TV to a computer, you must first implement the hardware connection using the appropriate cables and connectors, and then configure the necessary parameters. The settings themselves may differ from the operating system used and the video card model on the PC.

It must be said that such a connection of a TV to a computer or laptop is needed to use a large diagonal TV screen as a monitor. It makes it much more enjoyable to watch movies, photos or play games. But all this is true for modern models of HD Ready TV sets with a screen resolution of 1920 x 1080 or 1366 x 768. If you use lower resolution screens like older TVs, you may not get any gains in video quality. Or there may be a situation when there are no necessary connectors for transferring high-definition video from a computer to a TV. But all modern models of both TVs and video cards can be connected to each other to watch Full HD video on the TV screen.

How to connect the system unit to a TV as a monitor

VGA cable

The problem of connecting the TV to the computer can be solved with a VGA cable. The connector for this cable is standard and is present in all video cards for transmitting an analog signal. If there is a connector for it in the TV, then the connection will not pose any problems. To do this, you need a VGA cable and an audio cable.

But before you start using this method, you need to check if the TV supports high definition. The fact is that many TV models can only receive low-quality signals via a VGA cable. If everything is in order and high resolution is supported, then you can start connecting:

  • Disconnect the equipment from the mains;
  • Connect a VGA cable to the corresponding inputs on the TV and computer;
  • The PC audio output must be connected to the audio-in socket on the TV. This requires a special audio cable;
  • Power on TV and PC;
  • Make settings for the computer and TV (similar to the settings from the HDMI connection);

Ways to connect your TV to your computer

When the computer screen is not enough to meet all the needs, then a good old friend comes to the rescue. the TV. Well, not very old, “Rassvet” is not suitable for these functions, but modern plasma panels are quite good friends with a computer. And then it will be possible to launch a game, your favorite movie or music (although why a big screen for music?) On a wide plasma.

It seems that it is very simple, but in the process, many are faced with difficulties, and on the Internet they ask Google how to connect a TV to a computer. Fortunately, the search engine knows the answers to all questions. And this problem also has several solutions.

  • 1 HDMI
  • 2 DVI cables
  • 3 VGA cable
  • 4 RJ45. network connector

HDMI allows you to better connect your PC to your TV. Through this cord, you can transfer both a high-quality picture and even sound. The TV and the panel of the system unit must have a special connector with a height of 4.5 mm and a width of 14 mm. To make the connection, you need a wire with an HDMI plug at each end.

  • First, you need to remove both the computer and the TV from the outlet;
  • Connect the equipment with an HDMI-HDMI cable;
  • Turn on the system unit and TV;
  • Select the HDMI connector as the source of the image on the TV (there is a special button on the remote control to select the source (most often it is called “Source” or “Input”);
  • Configure the computer to transmit the image. To do this, go to the control panel (through the “Start” menu), and go to the sound effects control unit, where you need to select the HDMI interface;
  • Extend your desktop to another screen. In Windows XP, you can do it like this: right-click on the desktop, open the “Properties” menu and select the “Options” window, where you can make changes. In Windows 7 it happens like this: right mouse button on the table. select the “Screen Resolution” menu.
READ  How to connect speakers to a Xiaomi TV

DVI cables

First, you need to remember that DVI connectors, and accordingly cables, are different.

Therefore, you should find out which specific type is needed, and only then buy it. Each option has its own characteristics and characteristics:

  • DVI-D. This kind transfers digital signals from the video card of the unit to the TV. Data is transmitted promptly and with high quality;
  • DVI-I. Such a cable is rightfully universal, because it provides both analog and digital transmission of image and sound. Choosing this option will be the best solution, although it costs a little more;
  • DVI-A. Most experts advise against buying this type of cable. Its peculiarity is that the data is processed from digital to analog, and only then appears on the screen and in the TV speakers. These processes greatly affect the image quality.

TV connectors

The transmission of high-resolution images is associated with the application of a video signal in digital form and its subsequent processing. For the transmission of video signals in digital form, HDMI and DVI interfaces are used. It is with the connectors and cables of these two interfaces that the connection of the TV to the computer is connected today. I must say that DVI is of three types: digital, analog and combined. That is, in order to transmit a Full HD digital signal through it, you need to select a video card with a digital output (indicated by the additional letter D) or a combined one and use the appropriate cable.

HDMI is considered the preferred connection option, since it also carries audio along with video. When connecting via DVI, you may need to additionally connect the audio signal via a separate cable. In order for the video card to output sound to the output in some models, it will be necessary to connect the S / PDIF connectors inside the computer system unit, the connection cable goes in the video card kit. Then it is even possible that there will even be sound at the DVI output, and using a DVI-HDMI adapter and then on a TV HDMI-HDMI cable, you can get video and sound from one DVI connector. HDMI cable is even better because it can be very long (more than 10 meters). And when using a DVI-DVI cable, you may need to install intermediate amplifiers (which no one does) if the length exceeds 5 meters, otherwise interference will occur.

To connect a computer, the TV may have a separate HDMI input, despite the fact that the TV receiver usually has several such connectors. You need to read the instructions to determine the required input.

If you use a home theater for sound reproduction or other audio system, then you can send a signal to the receiver from the computer via HDMI, and from the receiver to the TV also via HDMI.

All other methods of transferring video from a computer use an analog signal form and are not capable of transmitting HD video. They are used when it is not possible to connect via HDMI or DVI.

  • 1) VGA (D-sub). One of the main connectors in modern LCD TVs. Used to connect a computer. Has 15 contacts. Capable of transmitting a signal with a resolution of 1280×1024 pixels.
  • 2) Component. Represents three “tulips” of different colors: green, blue, red. Two of them transmit the color component, and the third one passes the luminance signal. On devices it is designated as Y Pb Pr. The performance of this connection is better than A / V and S-video.
  • 3) Scart. This is a large 21-pin connector. It has different specifications, so it can transmit different signals, depending on what the manufacturers have connected inside the connector. Can transmit good quality (standard definition) video and audio.
  • 4) S-video. It has also been used in video technology for a long time. May no longer be on modern TVs. The transmission of color and brightness goes through different wires, so this connector is better than ordinary tulips. Transmission of only video signal, sound is connected with a separate cable. Can be 4 or 7 pins per connector.
  • 5) Composite (A / V). These are ordinary “tulips” (RCA). They have been used for a long time. Worse than the component one in that the signals of both luminance and chrominance are transmitted over the same cable, so interference occurs. They can stand on DVD, game consoles, etc. Both video and sound are transmitted.
Connector Signal Quality Sound
HDMI Digital Full HD Fine there is
DVI Digital Full HD Fine May be
VGA Analog HD Okay Not
Component Analogue Satisfactorily Not
Scart Analogue Satisfactorily there is
S-Video Analogue Satisfactorily Not
A / V Analogue Satisfactorily there is

Usually, after correct connection, the picture from the computer appears on the TV screen right away. Sometimes you need to adjust the resolution or, if there is no picture at all, adjust the outputs and inputs correctly. Before configuring, it is recommended to download and install the latest drivers for your video card and computer sound card.

The most common are the following video card models:

  • Powered by NVIDIA platform. Drivers are available on NVidia.ru
  • Based on ATI platform. Drivers are available at ATI.ru
  • Powered by Intel Extreme Graphics platform. Drivers available on Intel.com

After connecting and turning on the network on both devices, Windows should display a connection message and ask how you are going to use the secondary screen. There are three options:

  • 1 Use external display as main display.
  • 2 Extend the work area to another screen while using both displays.
  • 3 Connections, use the screen as a clone, that is, the image on both displays is the same.

It is preferable to use the connected TV in “clone” mode, it is easier to set up and control it.

In this menu, you need to configure the parameters of the connected display as you need.

For more complete image settings (resolution, frame rate, aspect ratio, color gamut), you may need to go to the video card settings.

For ATI video cards, this is “ATI Catalyst Control Center”:

For NVidia video cards, this is the “NVIDIA control panel”:

To enter the settings of the video cards, you need to right-click on an empty place on the desktop and in the menu that appears, select the desired item corresponding to your video card.

RJ45. network connector

To make such a connection, you need to match the TV to two parameters:

  • He must have a media player (to put it simply, he must be able to play music, videos and images from a flash drive);
  • It must support DLNA technology and its block must contain an RJ45 network connector;

DLNA is a special technology that allows the exchange of information between the TV and other devices in real time. Thanks to this system, it is possible to play files directly from the hard drive without transferring them to other media. You can find out if there is such a function in a particular TV model from the instructions for it or on the manufacturer’s website.

To connect your TV to your computer, you need:

  • Make a physical connection;
  • Download and install a special program (it’s free);

The first stage involves connecting directly, or through a router. It is not advised to use a router, because then it has a heavy load, which will lead to a loss of performance. In order to connect without a router, you need a “Crossover” cable of the “Twisted pair” type. The crimp on the cord must be crosswise. You will also need to make changes to the IP settings.

If the computer contains two network cards, then you only need to configure the one that connects to the TV. You also need to download and install the Home Media Server application. After that, you need to change certain settings (when the cable is already connected and the equipment is turned on):

  • Turn on “Home Media Server”, open the “Settings” menu, select the “Devices” window and click on the “Search” button. When the program finds the TV, you need to select it;
  • Return to settings and open the Media Resources menu. After that, click on “Add” and select the folders and drives that are allowed to access through the TV. In the same place, in the “My Computer” folder, put a check mark next to the “Local drives” line (thanks to this, you can open all files). Click “Ok”;
  • Start the program by clicking the “Start” icon;

To view the files, the equipment must be turned on, the Home Media Service program must be running, and the source of media files must be set to Ethernet (Lan). This will open a file explorer that will allow you to view the required files using the remote.

How to connect a computer to a TV via HDMI?

Most modern LCD TVs are equipped with various interfaces for connecting other devices. An HDMI interface is found on almost every LCD panel. Thanks to the HDMI connector, you can connect a DVD player, a satellite dish receiver, a computer and various mobile devices, such as a tablet, smartphone or mini-computer, to the TV. But most of the users do not know how to connect a computer to a TV via HDMI. If you are faced with the problem of “correct” connection of the computer to the TV, then this article will help you solve it.

READ  How to connect a phone to a TV with a cord

The first step is to find out if your computer’s system unit has an HDMI connector. For connecting two devices via HDMI, in our case a computer and a TV, an HDMI interface is required in each device. This connector is located in the video card of your computer and allows you to transfer video and sound over a single cable. Thus, unlike VGA, HDMI has no problem with audio transmission. The HDMI connector in the video card looks like this:

The interface is always located on the back of the system unit. As for the HDMI connector in the TV, it can be located both on the back of the case and on the side. over, the TV may have several connectors that are designed to connect various devices.

The diagram for connecting a computer to a TV looks like this: turn off both devices, insert one end of the cable into the TV, and the other into the HDMI connector on the computer.

After connecting the TV to the computer, turn on the LCD panel, open the settings and set the HDMI input as a signal source.

Then we turn on the computer and wait for the system to boot. As a rule, the image on the TV should appear at this very moment. If there is no image, then right-click on the desktop after loading the system and select the “Screen Resolution” tab. In the line “Screen” select the LCD panel, click “Apply” and “Ok”.

In this way, you can connect your computer to your TV via HDMI on Windows 7/8/10. But what if your video card doesn’t have an HDMI interface? Typically, every video card has a DVI connector. There are special cables and adapters of the DVI-HDMI type on sale, with which you can connect an LCD TV to the computer system unit.

If the image on the TV is of poor quality or cropped, then in the settings of the video card you can always set the necessary values ​​of the resolution and image quality. When buying a cable, you should not save money, since often problems arise with cheap HDMI cables: sound is not transmitted, picture quality deteriorates, data transfer stops.

S-Video

Almost all old computers and TVs are equipped with S-Video or RCA connectors. Many new system units do not have such outputs. Composite connectors on cords are available in three colors:

  • Yellow. video signal.
  • White. left audio channel stereo or mono signal.
  • Red. right stereo channel.

S-Video cannot provide high image quality and is only advisable if there are no other connection options.

The cable is connected when the devices are turned off. Setting up a connection is easy:

  • Turn on the TV first, then the system unit.
  • The computer should recognize the composite connection automatically.
  • In the Properties or Screen Resolution menu, you should select the use of the TV (extension or duplication) if there is a need to adjust the screen.
  • On the TV remote control, press SOURCE (INPUT) or the Video button, and select the appropriate type of signal.

The computer’s desktop will be displayed on the TV screen, image control is carried out through the system unit.

  • Cheapness and availability of wires.
  • Poor signal transmission quality.

How to connect a system unit to a TV: basic methods

There are a number of reasons for connecting a computer to a TV. The main ones are the desire to enlarge the image of photos, watch a movie on a large screen with stereo sound, play with pleasure or just work without straining your eyes.

Connecting the system unit to the TV

How to connect a system unit to a TV

Almost every user has the ability to connect two devices, unless the equipment is too old. You need to know the capabilities of the system unit, study the instructions for the TV and the device outputs. Then you can draw conclusions on how to make the connection. There may be several of them, the following are available for modern devices:

  • DVI
  • HDMI
  • VGA cable
  • Network cable
  • Viracast
  • S-Video

It replaced the VGA cable at the end of the 20th century and made it possible to replace the analog signal with the digital one. Using a DVI cable, you can only transfer video, the sound will have to be connected with a separate wire. Provides image transmission with a resolution up to 2048 x 1536, with a frequency of 75 Hz. The cable length can be 20 m.On system speakers, the connectors are designated as DVI IN, TVs DVI OUT.

Attention! A cable labeled DVI-A carries analog signal only, and the picture quality may not be satisfactory. Before purchasing a cable, you should examine the connectors on the devices, they must match in the number of contacts.

Connecting the cable is very simple by following these steps:

  • Connect the cable to the disconnected devices.
  • Enable and select the DVI signal source on the TV.
  • In the computer, select the required playback order (duplication or playback only by the TV) and the required screen resolution in the properties or screen resolution.

The image must be clear and of good quality. Sometimes a reboot of the system unit is required.

  • Simple connection.
  • High quality video playback.
  • Another wire from the computer.
  • Sound signal transmission via additional wires.

Modern technology for broadcasting video and audio signals. Since its inception, it has grown to the transmission of Full HD 3D video format with a resolution of up to 3840 × 2160 and high-quality natural sound.

Almost all modern TVs and computers are equipped with at least one HDMI connector, the type of connectors is A. Other types (B, mini-HDMI or C, micro-HDMI or D) are either practically not used, or are used in laptops and smaller devices.

There are several types of cables with different markings. To connect a computer to a TV set, two are used. HDMI Standard and HDMI High Speed. In fact, these are two identical cables, but the latter is characterized by manufacturers as premium.

The order of connection and setting is the same as for DVI.

Important! When buying a cable, pay attention to the presence of small barrels. Their presence will save you from interference, radio interference and failure of devices.

Pros of HDMI connection:

  • The presence of connectors of this type in all new TVs and computers.
  • Easy to connect.
  • The cable is affordable and inexpensive.
  • One universal wire for broadcasting a complex signal.
  • Excellent data transfer quality.

Miracast

The ability to do without wires has appeared thanks to the Wi-Fi connection. In this case, the signal from the computer can be broadcast directly to the TV screen. This superior technology allows you to display your computer desktop and broadcast from the Internet on the TV screen.

Both devices must be equipped with Wi-Fi devices, a TV with support for the Miracast function. If the modules are not installed by manufacturers, you can purchase and connect yourself.

For TVs, external Miracast (Mirascreen) adapters are purchased, preferably of the same brand. They are connected to the HDMI connector. The computer can be equipped with an internal Wi-Fi module or purchased an external.

Connecting with different Windows has nuances, most likely you will have to download the Intel Wireless Display program, preferably from the official website. Commissioning and installation of the connection is carried out in the following order:

  • Install Intel Wireless Display software and start streaming.
  • If an external adapter is connected to the TV, select the signal source (the corresponding HDMI connector). If the TV has Miracast function, activate it via the Menu.
  • You can watch.

The content displayed on the TV screen is controlled by the computer.

Benefits of Miracast Connection:

  • High connection speed.
  • Excellent video and sound quality.
  • No wires.

VGA cable

The analog VGA standard was introduced in the late eighties. Provides a sufficiently high quality signal with a resolution of 1280 × 1024 pixels. Until now, many devices are equipped with such ports. Sound is not transmitted by cable. Audio signal transmission can be provided with a separate audio wire or by connecting HDMI to a computer via an adapter to a VGA cable with tulip connectors.

The connection is simple and is performed similarly to the previous ones.

  • Provides acceptable quality of data transfer.
  • Uncomplicated connection.
  • Wire availability.
  • The need to transmit sound through a separate wire or adapter.
  • Not all TVs are equipped with a VGA connector.

Network cable

High-quality data transmission can be carried out using another cable. the network. In this case, the computer memory data allocated by the user can be displayed on the TV screen. These can be photographs, films, videos and soundtracks. Devices must be equipped with LAN ports.

Important! TV must support DLNA technology.

Using a network cable, data transmission can be organized in two ways:

  • Through a router.
  • By connecting directly.

To organize viewing using a router, you must complete the following steps:

  • Connect LAN outputs of devices using network cables to the router.
  • Install a program on your computer to create a media center. There are many programs (this is the commonly used Home Media Server, or created for a specific TV brand).
  • Using the installed program, you should select the folders for viewing and allow the connection of the TV.
  • In the TV menu, you need to go to Smart TV, select the program installed on your computer and open the Connected devices tab.
  • Open available folders and you can play music, movies, photos.

Without the mediation of a router, you can connect devices with a network cable directly through the LAN ports

The sound from the computer does not go to the TV, reasons

The main reasons for the lack of sound from the TV speakers are as follows:

  • The sound is muted on the TV itself. Eliminated by simply raising the volume.
  • Damaged cable. Cable replacement required.
  • Outdated system unit audio drivers. It can be fixed by simply updating the drivers on the website of the manufacturer of the system unit or components.
  • The devices have not been configured to play sound. It is necessary to configure the sound playback parameters by clicking on the “Speaker” image in the lower right corner of the desktop.
READ  How to connect an antenna to your LG TV

Modern technology makes it possible to connect a computer to a TV without much effort. At the same time, achieve good picture and sound quality. The methods are different, and everyone can choose the appropriate one, taking into account the capabilities of their equipment and the availability of equipment.

How can you connect the system unit to the TV. 6 ways

With a PC, the picture can be displayed not only on the monitor, but also on the TV. Why do this and how to organize the connection, the article tells. It contains a description of the most common options for the interaction of the system unit with TV, as well as instructions that will help you set up the image and sound output.

S-Video

This analog output is built into most video cards. And TVs often have multifunctional SCART ports. Using the appropriate cable or adapter, you can connect the system unit to a TV device.

Note: in terms of quality, this method is superior to connecting via VGA.

So, with the connection options, connectors and cables, the disadvantages and advantages of each of them, everything is more or less clear. But there is one more nuance that should be considered. Finding the right cable and connecting the devices is only 50% of success. It is also important to correctly configure the devices so that a picture is displayed on the TV display from the system unit.

Instructions: What to do if the tablet does not turn on. 2 possible problems and 3 ways to solve them

Configuring Image Output from a Windows 7 PC
Where What to do
Call the context menu Go to “Screen Resolution”
A window will open In the upper corner, click “find”. This will activate the search for the connected device.
Column “Multiple screens” Choose a suitable display option:
“Duplicate Screens”. both TV and monitor will work, transmitting an identical picture.
If you click “Expand screens”, then the PC and TV monitor will be recognized by the system as one whole. Part of what is happening will be visible on the monitor and another part on the TV.
If you click “Show desktop only 1 (2)”. the image is displayed only on the screen selected by the user.

After completing all actions, it is necessary to confirm each of them by pressing the corresponding key.

In other versions of the operating system, the process for setting up a connection is almost identical. Differences can only be in the names of the items, but they are not significant: you can intuitively understand which of them is responsible for what. In the case of using the software when connected via a router or network cable, there may be individual settings. It all depends on the software and the connection method. However, everything can be figured out, again, intuitively: the interface of such utilities is quite simple.

Curious: 10 best models of inexpensive gaming graphics cards

How to connect a system unit to a TV

Miracast

Miracast (MiraScreen) is a development, thanks to which you can easily project a picture from the display of one device to another, and you can do this not only from a laptop, desktop, but also from mobile gadgets.

You can understand whether a device is compatible with such a wireless connection by looking at the manufacturer’s website. It can also be contained in technical documentation. It is possible to determine whether devices support this type of connection by simply examining the settings in the device menu. Typically, this data is displayed in the item “wireless screen” (wireless connections) or other menu items that relate to functions related to the Internet or Wi-Fi.

Note: devices with Windows OS version 8 and higher are compatible with this technology. If the device does not have Miracast support, then you can solve this problem by purchasing a separate compact gadget known as the Miracast receiver.

Network cable

High-quality data transmission can be carried out using another cable. the network. In this case, the computer memory data allocated by the user can be displayed on the TV screen. These can be photographs, films, videos and soundtracks. Devices must be equipped with LAN ports.

Important! TV must support DLNA technology.

Using a network cable, data transmission can be organized in two ways:

  • Through a router.
  • By connecting directly.

To organize viewing using a router, you must complete the following steps:

  • Connect LAN outputs of devices using network cables to the router.
  • Install a program on your computer to create a media center. There are many programs (this is the commonly used Home Media Server, or created for a specific TV brand).
  • Using the installed program, you should select the folders for viewing and allow the connection of the TV.
  • In the TV menu, you need to go to Smart TV, select the program installed on your computer and open the Connected devices tab.
  • Open available folders and you can play music, movies, photos.

Without the mediation of a router, you can connect devices with a network cable directly through the LAN ports

How to connect a TV to the system unit

  • – graphic editor Adobe Photoshop installed on the computer;
  • – special program installed on the computer.

Start the graphics editor Adobe Photoshop. Then download the cover template. Blu ray Cover from the website. In the window that opens, under the “Add to Favorites” button, click “Download File”. Extract the files from the.zip archive by right-clicking on the archive and clicking “Extract”.

Psd file from the archive in Adobe Photoshop by pressing CtrlO. Take a look at the layers panel. “Layers” (if there is no panel, then press F7 in the top row of keyboard keys). Make the layers invisible “Bk” and “Example”. click on the “eyes” to the left of them. Open the Blu ray Cover folder by clicking on the arrow next to it. Make the “Box Art” folder invisible. Save changes by pressing CtrlS on your keyboard.

First download from the Internet and open the movie or music album poster image that you want to insert into the cover without closing the bluraycovers.psd file. Press AltCtrlI and reduce the image to 357×415 pixels. In the layers panel, click on the poster layer and hold it, drag it to the bluraycovers.psd file.

Place this layer above the “Cover highlight” layer so as not to go beyond the boundaries of the file. Use scaling if necessary. Merge all layers by pressing CtrlShiftE combination. Then click “Image” (Image), then “Trim” (Trimming) and put a point on the first point. Click “Ok”.

After that press ShiftCtrlS. Save the file in.jpg format with 12 quality or.png quality. Give the disc cover a new name. Print the cover and place it in the disc box.

If you need a round picture to disk, use a different template. Blu Ray Template. Download it from the Internet by repeating steps 1. Open in Adobe Photoshop the BRD Template.psd file and the poster image you saved from the Internet earlier. Reduce the template and / or poster if necessary by pressing CtrlAltI. Change the values ​​of the width and height, click “OK”.

In the layers palette of the.psd file, turn off the layer under the “Your CoverArt Here” layer. The layer to be turned off looks like a blue square with a white stripe down the bottom. Drag the image onto the template and position it above the “Label Mask” layer. Merge all layers with CtrlShiftE. Save the resulting picture and print it.

Sound from the computer does not go to the TV: reasons

If in the audio parameters of the PC the TV is not assigned as a device that will output sound, then the audio will not be played. This is the main reason. The situation can be corrected in just 4 steps. How to do this, the following table will tell you.

Act
one Right-click on the sound icon in the notification bar and select “Playback Devices”.
2 After that, a window will open in which playback devices, “Speakers” will be displayed and the name of the TV will be displayed, for example, SONY 100ZD93 (KD100ZD9BR3).
You need to click on the TV device with the right mouse button.
3 Select “Use as default”.
four Click Ok to save the changes. Then the sound is played by the TV speakers.

It is also important to know that DVI and VGA are only capable of transmitting video. In order for the sound to be reproduced, you also need an audio cable with mini-jack connectors at both ends. This standard is almost universal and there will be no problems with the purchase of such a cable. Or you can not bother and just connect any acoustics to the system speaker.

See also: Which is better, laptop or computer (PC): 5 tips on how to choose equipment for your needs

Turning your TV into a PC screen isn’t difficult. All you need to do is select compatible ports and choose a cable (or an adapter, if the ports are different). Configuring everything will also be easy and short-lived.