iPhone does not catch the network what to do

Time correction to restore access to the cellular network

  • Connect to an active Wi-Fi network.
  • Go to Settings. General.
  • Open Date and Time.
  • Activate the item Automatically.
  • If the switch “Default” is active, then turn it off and turn it on again.
  • Restart iPhone.

As you can see, the method is very simple and at the same time quite effective. However, you definitely need to be connected to a Wi-Fi network for the iPhone to register with Apple’s server. Otherwise, the cellular connection will not come to life.

iPhone does not see the network. simple solution to the problem

After manipulating the iPhone’s firmware or hardware, it is not uncommon for the iPhone to not see the network. There can be many reasons for this problem, but one of the most common is a failure in the current date and time zone settings. Today we will look at the main ways to solve this problem.

After flashing iOS or replacing the SIM card, it happens that the iPhone says “no network”. In place of the operator’s logo is the inscription “No network”. This situation immediately reduces the capabilities of the device and actually turns it into a player. Often, users take the device to a service center, where they try to return the connection for an additional fee, although in most situations the problem when the network on the iPhone is lost can be solved on their own.

The secret lies in the peculiarities of the work of iOS itself. iPhone will not pick up the network if the time zone and date / time do not match the current values. It is very easy to fix the situation by simply connecting the smartphone to a Wi-Fi network and performing a number of simple manipulations.

What to do if there is no wireless access point nearby?

In this case, the simplest solution would be to create a Wi-Fi network using another iPhone that can connect to the mobile Internet and distribute the wireless network. It is quite simple to do this:

  • Go to Settings. Cellular. Cellular data network.
  • In the Modem mode section, in the APN field, enter the network identifier. It depends on your mobile operator. The corresponding settings can be found in the technical support of the operator.
  • The Username and Password fields can be left blank.
  • Return to the Cellular menu and go to the Modem Mode section.
  • Activate Tethering.

After these manipulations, a new item will appear in the main settings menu. Modem mode. After its activation, the device will start to “distribute” the Internet.

If this method is also unavailable (the inscription on the iphone “network search” is saved), then all that remains is to restore the iOS firmware.

First, you will have to download the firmware file, connect your smartphone to a computer with iTunes installed. In the app, select Recover.

It is important to remember that the recovery procedure will delete all personal data and settings from the mobile device.

If even after these manipulations the iPhone does not levitate the network, then the problems may be associated with the hardware of the device and it is no longer possible to go to the service center.

Internet settings in iPhone with iOS 10

In the first example, the Internet settings were shown using the example of older versions of iOS. In order to turn on the Internet in an iPhone with a more recent firmware (for example, iOS 10), do the following. If you do not have a SIM card yet, then we purchase a SIM card, having previously decided on a more suitable tariff plan. Get the settings brochure from the seller immediately

Now go to the Settings application and select. Cellular. Data Options
Next, select. Cellular data network, and register all APNs (and, if necessary, other sections). In the example above, the settings of the Tele2 operator are indicated, you need to enter the settings of your operator.

We make the settings for the Internet, which you can find out from your mobile operator or search in the existing list given in the archive below. Fill in the fields in small, English letters, as in the examples given:

MTSAPN: internet.mts.ru
Username: mts
Password: mts

BeelineAPN: internet.beeline.ru
Username: beeline
Password: beeline

MegaphoneAPN: internet
Username: blank
Password: blank

Tele2APN: internet.tele2.ru
Username: blank
Password: blank

You can search for your operator’s settings in

iPhone 5S no network exclamation mark

Earlier, on five eskahs there was an exclamation mark on the smartphone screen, in the absence of a network. On recent versions of iOS, this symbol is not displayed. How to repair when the exclamation mark is on and the phone is searching for a network:

rolling U6_RF. If rolling the EEPROM did not help, and Electrically Erasable Programmable Read-Only Memory has already been soldered before you; then most likely the non-volatile memory has been replaced. That is, it was installed from another phone. In this case, the phone can be returned without repair. The device will not find the network. You can determine the previously performed soldering of the rim by the absence of a compound on it. From the conveyor, the chip is coated with a polymer resin.

No network on iPhone 6 due to software, what to do?

If the iPhone 6 does not catch the network and the operating system is to blame for this, then first check the correct date and time. In firmware starting from iOS 7, there is no signal reception or it is displayed incorrectly until the correct date and time is entered, after which it is advisable to restart the phone. You can check it by going here: “Settings”. “General”. “Date and time”.

If everything is in order with the date, and the iPhone says “network search”, then you can try to do a factory reset. You can do this by going to: “Settings”. “General”. at the very bottom, the item “Reset”. “Reset network settings”

Go to “Settings” Further, the item “Basic” Then the item “Reset” Click “Reset network settings” And we confirm the reset

After that, the iPhone will ask for confirmation and start a factory reset, after which it will reboot. If that helps, great! If not, then read on about hardware faults.

Reboot

Oddly enough, but very often a banal reboot of a smart phone from Apple allows you to restore its normal performance.

This is due to the fact that we are talking about electronics, numerous ongoing processes. It’s like with a computer. Active work, performing a large number of tasks lead to the fact that the device is heavily overloaded, experiences serious loads, one might say gets tired. To release all the ballast of a hard day’s work, people need to sleep. And machines, including computers and smartphones, will restart.

To restart your iPhone, just hold down the shutdown button and then turn the device back on. During the reboot, the network settings are reset, and the network may well appear.

READ  iPhone is not charging from charging what to do

Time change

Incorrect time and date settings may be the reason for the loss of the signal. Errors can occur even if the minutes do not match, so it is recommended to set the automatic time matching mode:

  • Expand device settings.
  • Go to the “Basic” block.
  • Select “Date and Time”.
  • Do not forget that you need an Internet connection to auto-update the time, in this case both mobile Internet and Wi-Fi network will do. Activate the “Automatic” function. If it is already enabled, then disable it and enable it again. After that, restart the device so that the time is set, focusing on the network time.

Reset network settings

Often, when a notification appears on the screen about the absence of a mobile operator’s network, a solution such as resetting the network settings helps.

To reset the network settings on a smart device represented by the iPhone, you must:

How to fix an Apple iPhone that won’t connect to WiFi

  • open the main settings menu by clicking on the corresponding icon on the desktop;
  • go to the “General” category;
  • then find the “Reset” section;
  • in the list of available actions, tap on the item “Reset network settings”.
iphone, does, catch, network

This will reset and the phone can function normally again. Sometimes it is additionally recommended to reboot the device. The combination of these actions returned the network to the iPhone multiple times.

Factory settings

It’s about resetting your phone to factory settings. IPhone users should understand that in addition to system software problems, as well as potentially malware that caused the phone to suffer, photos, videos, installed games and everything else will be deleted.

Therefore, it is recommended to resort to such a solution, if the device simply does not see the network of the cellular operator, as a last resort.

How to restore a device

If you have an iCloud or iTunes backup, you can reset your device without losing your data. Otherwise, all personal information and installed applications will be irretrievably lost, so make sure you have a backup in advance. After that, connect to a Wi-Fi network, go to the main settings of the device, then to the “Reset” subsection and select the “Reset content and settings” function. Go through the reset procedure, after its completion, the initial configuration of the device will begin, at one of the steps of which you can specify from which backup you want to restore your device.

Physical check

If the above steps did not help, then you need to check the SIM card. Pull it out and check if it works on another iPhone. If the network is not found there, then the SIM card will have to be replaced. This can be done at the nearest service of your mobile operator.

If the SIM card works in another device, then there are two options: either some part of the phone is damaged and it needs to be carried to the service, or errors appeared in the firmware that prevent the SIM card from working, and you will have to perform a recovery.

How to fix the problem

First of all, you need to make sure that where you are, other devices with SIM cards of the same cellular operator are picking up the connection. You may just be out of coverage. It is also worth getting out of places where the signal can be drowned out by a dense ceiling, walls or special devices.

If there is a signal on other devices, then you should follow the instructions below, which may return the network to you.

Data reset and refresh

  • While in the device settings, select the “General” section, and in it the “Reset” subsection. Open the “Reset” section
  • Reset network settings. Resetting network settings
  • Return to the main settings and click on the button “About this device”. Automatic diagnostics will be carried out for updates for cellular communications. If they are found, you will be prompted to install them, confirm the action and wait for the process to end. Go to the section “About this device”
  • Return to the device settings and select the “Cellular” item, and in it the “Cellular data” sub-item.
    We open the section “Cellular communication”
  • Please fill in all empty fields. Data for them can be taken on the official website of your mobile operator. Entering cellular data

Network problems

It happens that after reinstalling, resetting or updating iOS, the device starts to catch the network badly or stops doing it altogether. A similar problem appears not only due to breakdowns in the system part, but also due to malfunctions in the physical component of the phone. Network problems will be reported by an inscription in the upper left corner of the notification panel. “No network” or No Service.

In the upper right corner of the screen, you can see a message stating that there is no network

If the problem lies in the system part of the iPhone, then it most likely can be fixed on its own, but if the SIM card itself or one of the parts responsible for communication is damaged, then you will have to contact special services to fix Apple equipment.

Checking the airplane mode

First, make sure airplane mode is off. Its status can be seen in the Quick Access Toolbar. Secondly, if it was turned off, turn it on for 15 seconds, and then turn it off again. These actions will reboot the SIM card and possibly return the network to it.

Time change

Incorrect time and date settings may be the reason for the loss of the signal. Errors can occur even if the minutes do not match, so it is recommended to set the automatic time matching mode:

  • Expand device settings. Open device settings
  • Go to the “Basic” block. We open the section “Basic”
  • Select Date & Time. Open the item “Date and Time”
  • Do not forget that you need an Internet connection to auto-update the time, in this case both mobile Internet and Wi-Fi network will do. Activate the “Automatic” function. If it is already enabled, then disable it and enable it again. After that, restart the device so that the time is set, focusing on the network time. Set up automatic date and time updates

No network after flashing, iOS update, factory reset

Sometimes it happens that after repairing the device, updating the operating system, flashing or resetting to factory settings, the iPhone loses the network, and the operator’s logo does not appear on its display. Instead, you can see “Searching” or “No network” on the screen. This is especially true for iPhone models 7 and 8, as well as earlier. 4, 5 and 6. The first thing to do in such cases is to make sure that the SIM card is working properly. To do this, you just need to install it in any other phone.

READ  Photos are not transferred from iPhone to computer

If the SIM card is working, but the problem remains, you should pay attention to the correct time display on the device display. If the current date and time is displayed incorrectly, which happens quite often after repairing a smartphone in a service center, as well as after self-flashing or updating, you must perform the following steps:

  • connect to Wi-Fi;
  • go to the “Settings” menu item;
  • in the submenu “General” find “Date and time”;
  • move the “Automatic” slider to the active state;
  • if this item is active by default, deactivate and reactivate the slider;
  • restart smartphone.

It should be remembered that the phone must be connected to a Wi-Fi network without fail, otherwise no changes will occur to the cellular network.

If there is no access point nearby, you can create a Wi-Fi connection using a second iPhone that has access to the mobile Internet. This can be done as follows:

  • enter the “Settings” menu and go to the “Cellular” menu;
  • click on the item “Cellular data network”;
  • go to the “Modem mode” section;
  • enter the network identifier in the APN field, which can be found in the technical support of your operator;
  • the fields “Username” and “Password” are optional;
  • return to the “Cellular” submenu and switch the “Modem mode” slider to active state.

After these manipulations, the gadget will begin to “distribute” the Internet.

Loss of network after replacing the SIM card

There are also cases when the iPhone does not see the network after replacing the SIM card. Such a problem, like the previous ones, can occur in absolutely any model. If this happens, then the first thing to do is to get out and examine the SIM card. It can deteriorate when trimmed by yourself, when water gets on it, or for some other reason. In the event that it is damaged, it will have to be replaced with a new one. The operability of the card can be checked by inserting it into another smartphone.

In some cases, it helps to simply pull out the card and put it back in again. It happens that the network simply “glitches”, and such a simple procedure can restart it. Also, as in the previous cases, you can try to turn off and then turn on the smartphone, or several times to activate and deactivate the “Airplane” mode.

Network disappeared after Jailbreak

Sometimes iPhone network gets lost after jailbreak. This is especially true for those models that were originally locked for a specific telecom operator. In such cases, it is best to take the phone to a service center, where it will be unlocked by IMEI. However, this procedure can take several days, depending on which operator the smartphone is blocked by.

Why the iPhone does not see the network?

Apple makes one of the best smartphones out there. iPhone. But even he sometimes fails his owners. There are times when “Search” or “No network” is written on the phone screen instead of the operator’s logo. Questions about why the network disappeared on a smartphone most often come from owners of iPhone models 4, 5, 6, 7, 8, X, less often. XR, XS, XS Max.

What could be the reason for this? What if the smartphone does not catch or is constantly looking for the network? Does this mean that something is wrong with the device and it is broken? In this article, we will try to figure out why this is happening, consider the most likely causes of such a problem and offer options for solving it on the iPhone.

Signs of damage to the modem or antenna

It is not uncommon for the iPhone to stop seeing the network due to damage to the antenna or modem part. This can happen due to the impact of the smartphone, ingress of moisture and subsequent oxidation of the board. Also, this may be due to poor-quality repairs or non-original cheap parts. There are such breakdowns in the iPhone 4, 5, 6, 7 and 8 series, as well as in the iPhone X.

To check if there really is a problem with the modem, you need to:

  • go to “Settings” and go to the “General” submenu;
  • click the “About this device” menu;
  • find the field “Modem firmware”.

If it is empty, then the modem really has damage, which can only be repaired at a service center. This is a rather difficult and painstaking work and it is impossible to carry out it yourself, without the help of a qualified master.

An antenna malfunction can be judged by the appearance of the phone: if the gadget falls, gets damaged, it is quite possible that the antenna is out of order. In addition, an inoperative Bluetooth or Wi-Fi can also talk about damage to the antenna. Such damage should also be repaired only by an authorized service center.

No network when roaming

It often happens that the iPhone loses the network of the cellular operator abroad when using the roaming service. The most likely solution to this problem is to switch your smartphone from 4G to 3G mode. The fact is that mobile operators, for the most part, do not provide services abroad in LTE networks. Plus, owners of the latest iPhone XR, XS, and XS Max often complain about network issues when using 4G mode. Therefore, it will be advisable to switch to a third generation network. This can be done in the menu “Settings”. “Cellular”. “Voice and data”.

If this does not help, then you can do the following:

  • turn the device off and on again;
  • take out and insert the SIM-card again;
  • reset network settings in the menu “Settings”. “General”. “Reset”;
  • update to the latest software version;
  • reset your smartphone to factory settings;
  • update the settings of the mobile operator in the menu “Settings”. “General”. “About this device” when Wi-Fi is on.

It may also be that the mobile Internet does not work in roaming. In such cases, you need:

  • go to “Settings”;
  • go to the “Cellular” submenu;
  • find the menu item “Data parameters”;
  • move the slider “Data roaming” to the active position.

If none of the above worked and the smartphone still shows that the network is unavailable, then you should contact the technical support of the operator for help.

Another reason the iPhone can’t find the network is that the mobile operator is not providing its services in the region. That is, it happens that when entering an area where the coverage of a telecom operator is absent, the network disappears, and leaving it does not appear. In some cases, this can be corrected by activating the “Airplane” mode for a while or by turning the device off and on again. This will help reboot the frozen network.

READ  How to remove a SIM card from an iPhone

Additional ways to troubleshoot problems

Other troubleshooting methods that we will consider can be considered universal and provide answers to the questions that have arisen as to why the iPhone does not see the Wi-Fi network. Let’s analyze the most popular.

Reset

A factory reset is an effective way to troubleshoot network connection problems. As we already found out, connection failures started a long time ago. The iPhone 4 did not see Wi-Fi, the story continued with the iPhone 5, 6 (they are not being updated at the moment). The latest versions have eliminated these problems. If you are the owner of previous models, then the reset operation will help.

Make sure to back up your data, otherwise it is almost impossible to recover information.

  • go to the menu;
  • find the item “Settings”;
  • select “Reset”;
  • click “Reset settings”;
  • wait until the end of the operation.

Causes of the problem and solutions

Why is iPhone not catching Wi-Fi? Experts identify several reasons why the gadget does not recognize the network:

  • The access password was entered incorrectly. This is one of the most common reasons. To fix, enter the code again.
  • The Wi-Fi wireless module is defective on the device. Try to diagnose yourself and restart your smartphone. If this does not help, then take the device to specialists.
  • The router has malfunctioned. Here you should try to reconnect to the wireless network. Reboot your router and connect.
  • The firmware version is incompatible with the device. Reset to factory settings or update software.
  • Malware has entered the system. Install antivirus software on your device and activate it when downloading each application.
  • The software can’t handle the loads. In this case, you can partially clear the memory.
  • Unpaid invoice for communication services from the provider. Check your balance and top up.
  • The parameters of the router are entered incorrectly. It is enough to reset the settings, enter them again and reboot the device.
  • Mechanical damage. Corrected depending on the complexity of the situation.
  • reset all parameters and rename the access point;
  • change the security key;
  • try to connect again;
  • disable password entry;
  • try to connect again.

Mechanical damage can be avoided if you follow the basic rules for using your smartphone. If you ignore the problems, then because of them others may appear, the level of complexity of which will be impossible to predict.

A few more tips are described in the following

Checking the operation of the router

Relevant if a router malfunction is found. Because of this, no device can connect to the internet via Wi-Fi. This can happen due to power surges or malfunction of some parts.

  • Try restarting your router. If the situation has not changed, then use the second option.
  • Go to your personal account and check the parameters of the router. Login to the settings is done through the browser at 192.168.1.1 (or another, which is indicated on the device itself). Enter your personal password and login from the “admin”. Check if the settings are correct.

Iphone 4/5/5s/6/6s/7/8/10 no service problem fix || fix no network problem on iphones||

If that doesn’t work, then try connecting through another device, such as an iPad. And, if, when trying to connect, the iPad does not see Wi-Fi, then contact the repair service. This is an extreme measure. Maybe it’s time to change your router to a new one.

Module malfunctions

The hardware module connects to wireless networks. This detail is considered one of the most problematic in the iPhone. The problems started with the 4s model, where the smartphone did not see Wi-Fi. Usually, the malfunction manifested itself in the course of overheating, falling or getting moisture inside.

In this case, it is recommended to give the cell phone to a specialist, but if you have the appropriate skills, you can fix it yourself.

So, what to do if the iPhone does not see the network at home or any other Wi-Fi:

  • Turn off your smartphone and remove the case.
  • Unscrew the screws on the housing.
  • Remove the cover and unscrew the additional 4 bolts next to the camera.
  • Remove the unit and unscrew the screw from the antenna.
  • Use tweezers to pick up the latch and pull it out.
  • Take out the module and warm it up to 300 degrees. This can be done with a hair dryer.
  • Warm up the board. We do not recommend holding the hairdryer over it for a long time.
  • Wait for the device to cool down and put it back.

The solution to the problem is also relevant for the iPad, which does not see Wi-Fi. The same method can be used if it is necessary to replace a defective part with a new one.

Warming up is a dubious method. Even if you do not completely ruin the gadget, this method usually helps only for a while. Then the problem comes back.

What to do if the iPhone does not catch Wi-Fi: we look for the reason and solve the problem

If the iPhone stops picking up the Wi-Fi signal, do not rush to take your smartphone to a service center. Any failures cause great inconvenience, but if you figure it out and find the reasons, you can fix the problem yourself. Today we will find out why the iPhone does not see the Wi-Fi network.

Additional Information

If a virus was detected on the device and no antivirus programs are helping, follow these steps:

  • Back up all account data.
  • Connect via iTunes to your computer.
  • Press the return and power button at the same time.
  • When a message about recovery appears in the application, click on the “Restore” button.
  • Select the file with the appropriate firmware version and wait for the installation.

If the iPhone is not looking for or cannot connect to Wi-Fi, you can independently identify the problem and solve it through self-diagnosis. This will save you time and money, because in most cases the breakdown can be repaired by yourself.

But, if after the performed manipulations your smartphone still cannot connect to the network, do not risk it and take it to a service center.

Be sure to tell us which method helped in your situation. If you know other solutions, share your experience. Comments and online chat are always open for our readers.!