IPhone 6s won’t turn on what to do

iPhone 6s is low and won’t turn on. battery indicator is blank on screen

Naturally, after the phone is discharged, it will turn off. If an empty battery indicator appears when you try to turn it on, then you just need to put the smartphone on charge. It will not turn on immediately after that. you need to let him recharge. This can take up to an hour, depending on how long the iPhone has been discharged.

When you plug in the charger, the screen will change. If this does not happen and the image with an empty charge indicator still hangs, then the problem is either in the faulty connector or in the charger. Try charging the device with a different charger. If it does not work either, then you need to go to specialists.

The smartphone is overcooled

If you use your iPhone in cold weather, it will quickly run out and turn off. For more information on this problem and methods of solving it, read the article “iPhone 6s turns off in the cold. What to do?”. The solution to the problem in this case is the same as in the past, but with one addition: before charging the phone, you need to let it warm up to room temperature. Let it lie down for half an hour, and only then charge it. If you plug in a cold iPhone, condensation may form and components may fail.

iPhone 6s won’t turn on: how to bring it back to life

There may be several reasons why the iPhone 6s is turned off and you can’t turn it on with simple methods:

  • smartphone is empty,
  • smartphone is overcooled,
  • the smartphone is in the “save” mode
  • there was a software failure,
  • damaged smartphone components.

Read on to learn how to turn on your iPhone 6s in each of these situations.

The smartphone is in “save mode”. there is nothing on the screen and the phone does not respond to buttons

Apple smartphones switch to “save mode” if you rarely restart it. What to do to turn on the iPhone 6s in this case? Press and hold the Power button and Home button at the same time for 15-20 seconds. The smartphone should turn on.

IPHONE 6S WONT TURN ON QUICK FIX

Software crash. smartphone freezes during startup

It happens that you are trying to turn on the iPhone 6s, and it freezes on the screen with the Apple logo or just gives a red / blue screen. Then you need to restore the firmware. To do this, you need a cable and a computer with iTunes installed.

  • Connect smartphone to computer and open iTunes.
  • Force restart the device by holding down the power and Home buttons. After 10 seconds, release the power button, but continue to hold “Home” until the recovery mode screen appears.
  • A window will appear in iTunes where they will offer to restore or update the device. Select “Update”.

If after updating the iPhone 6s does not turn on, do not be alarmed: you just need to force restart it again by holding the power and Home buttons.

If you have an iPhone 2G, iPhone 3G, iPhone 3Gs, iPhone 4, iPhone 4s, iPhone 5, iPhone 5c, iPhone 5s, iPhone 6/6 Plus, iPhone 6s / 6s Plus, iPhone SE (2016), or iPad with a Home button

To revive the above iPhone and iPad models, just press and hold the Power button and the Home button at the same time for 15-20 seconds, after which the Apple logo will appear on the screen.

iPhone or iPad is frozen, does not turn on, or does not respond to buttons. What to do?

Don’t panic if your iPhone or iPad won’t turn on or respond to buttons when you try to turn it on. There are two ways to quickly bring it into working order, which we will tell you about.

The first two reasons the iPhone won’t turn on are not related to hardware or software glitches. Most likely, the smartphone is simply discharged, and it needs to be recharged, or it freezes, in which case a forced reboot will help.

If you have an iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max, iPhone XR, iPhone SE (2020), iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 12, iPhone 12 mini, iPhone 12 Pro or iPhone 12 Pro Max

Press and quickly release the volume up button. Press and quickly release the volume down button. Then press and hold the side button until the Apple logo appears.

If you have an iPad equipped with a Face ID scanner (without the Home button)

This method is completely identical with the latest iPhone models: you need to press and quickly release the volume up button. Then press and quickly release the volume down button. Then press and hold the power button until the device restarts (Apple logo appears).

Your iPhone or iPad battery is completely discharged?

If your iPhone or iPad is discharged, connect it to the power adapter and charge it for 15 minutes, then try to turn it on without disconnecting from the charger.

If the battery is completely discharged, then sometimes after 5-15 minutes of charging, by pressing the power button, you can see an image with a lightning and an outlet on the screen of a smartphone or tablet. This means that not enough time has passed since charging started. Wait a little more.

On the left is a screenshot of an iOS device that is not connected to the charger, on the right. it is charging:

If you have an iPhone 7 or iPhone 7 Plus

Press and hold both the Power button and the volume down button on the left for 15-20 seconds, after which the Apple logo will appear on the screen.

iPhone or iPad is frozen, won’t turn on or respond to buttons (may be black screen)

A common problem. A fully charged iPhone (iPad) is frozen (the program is frozen) or has completely turned off. Pressing the screen or the side button, unfortunately, does not lead to anything and does not start the device.

Do not worry! In 99%, nothing terrible happened, the smartphone automatically went into the so-called “save mode”, this happens if you very rarely restart the device.

It should be noted that resuscitation methods may differ depending on the device model. so.

Option 1. Hard Reset

We turn off the iPhone using the Hard Reset method, that is, the so-called “hard reset”. To do this, you need to simultaneously hold down and hold down two buttons for 10 seconds: Home and Power. Keep out until the device turns on.

The iPhone does not turn on but the apple on the screen is on. What to do?!

Popular smartphones from Apple, whatever one may say, this is the same computer, albeit a mobile one. And with him, like other representatives of this class of devices, troubles can happen. both hardware and software. One of the common reasons that can happen to them is when the iPhone does not turn on, but the apple is on after pressing the Power button.

People call this unpleasant problem the “white apple”. In fact, this is a certain state of the iPhone, which is characterized by the display of the company’s logo on the screen (a bitten glowing apple) when trying to turn on the smartphone. In this case, further loading of the device does not continue. At the same time, he does not react to anything and, as usual, does not turn off. How to be? The easiest thing to try is a Hard Reset. But, let’s take our time and consider all the options in order.

So, what can be done to restore the phone’s working capacity if the iPhone does not turn on and the apple is on? There are such methods:

Option 2. Reinstall iOS

If the first method did not help, you should try reinstalling the software on the iPhone. To do this, the iPhone launches in DFU mode. This is done like this. we connect the smartphone to the computer and launch the iTunes program. Next, hold down the Power and Home buttons. You need to hold it for about ten seconds. After this time, only the Power button must be released. After that, iTunes should see the device (the screen will remain dark at the same time). Well, then the program should offer to restore the device from a backup and reinstall iOS.

Then, after the device is restored. make a software update.

Option 3. Picking Cydia

This method is an alternative to the previous one in the event that you do not want to restore the device or for some reason cannot do it while the iPhone does not turn on and off, but the glowing apple is on.

Here I will make a small lyrical digression. The fact is that very often the reason that the iPhone does not turn on is the installation of some third-party application, which either did not get up correctly, or does not work correctly. Then you should try to remove it and restart your smartphone. Another equally common reason is Cydia tweaks.

To restore the performance of the iPhone, which has an apple on the screen and does not disappear, let’s try to load it without Cydia tweaks. To do this, turn off the device, press the volume up button. “” And hold it down, wait until iOS boots without Cydia tweaks. If the download is successful in this mode, the reason is clearly in the last installed Tweak. Delete it and the device will work again.

If it still does not boot, then restart it again. Then after 5 minutes, try calling your iPhone. If you manage to get through. great! This indicates that the phone’s loading is interrupted at the very last moment of the OS launch. Then you need to try to access the file system through the iTools or iFunBox programs and use them to search for the files that are responsible for the malfunction.

Otherwise, whether you like it or not, in order to remove the burning apple on the phone screen, you still have to reinstall the IOS using the method I described earlier.

Note: This manual is suitable not only for smartphones iPhone 4, 5 or 6, but also for iPad tablets, because both have one operating system installed, which means that an apple can burn on the iPad and it does not turn on and does not turn off. Good luck and stable work!

Restore iPhone via iTunes

If the iPhone does not turn on even after connecting to the computer, then only restoration will help out.

❗ In most cases, recovery involves deleting all data from the device. You can return them only if you have an up-to-date backup.

Connect iPhone to computer with USB cable and launch iTunes (Finder window in macOS Catalina).

Enter iPhone into recovery mode. For this:

Note: iPhone must be connected to computer via USB cable.

  • On iPhone 6s, iPhone 6, iPhone 5s, and earlier. Press the Home and Power buttons (power button, located on the side or top of the case) at the same time for about 20 seconds until the iTunes logo appears on the screen (laptop logo in iOS 13).
  • On iPhone 7 and iPhone 7 Plus. Press and hold the Volume Down and Power (Side) buttons at the same time for about 20 seconds until the iTunes logo appears (the laptop logo in iOS 13).
  • On iPhone 8/8 Plus, iPhone X and later. Press and immediately release the volume up button. Press and immediately release the volume down button. Then hold down the side button and hold it for about 20 seconds until the iTunes logo appears (laptop logo in iOS 13).
READ  Photos are not saved on iPhone

iTunes will report detecting iPhone in recovery mode. In the window that opens, select “Update”. Initially, this option should be selected, as it can allow you to return the device to a working state without losing data.

If data lossless recovery is possible, the iPhone update process will start. Wait for it to end. ❗ Never disconnect your iPhone from your computer.

If the update fails, then a recovery should be performed. Re-enter iPhone into recovery mode (step) and in the iTunes window that opens, select “Recover”. Wait for the end of the operation.

Updating or restoring will bring your iPhone back to working condition.

iPhone won’t turn on, black screen. what to do

iPhone won’t turn on and apple is on? Or is the screen completely black and the iPhone is unresponsive to button presses? Both of these problems can happen to any iPhone user without dropping the smartphone. Learn what to do if your iPhone won’t turn on in this tutorial. You can solve the problem without going to the service center and the accompanying expenses.

Perform a hard reboot

The first thing to do if the iPhone won’t turn on is to force it (aka “hard”) restart. It takes the iPhone out of recovery mode, which may have been accidentally turned on, and simply resets software errors on the device.

Force restarting works differently on different iPhone models.

On iPhone 6s, iPhone 6, iPhone 5s, and earlier. Press the Home and Power buttons (Power button, located on the side or top of the case) at the same time for 15 seconds until the Apple logo appears on the screen.

On iPhone 7 and iPhone 7 Plus. Press and hold the Volume Down and Power (Side) buttons at the same time for 15 seconds until the Apple logo appears.

On iPhone 8/8 Plus, iPhone X and later. Press and immediately release the volume up button. Press and immediately release the volume down button. Then hold down the side button and hold it for 15 seconds until the Apple logo appears.

Connect iPhone to iTunes in Recovery Mode

If the iPhone does not respond to either charging or hard restarting, the smartphone must be put into recovery mode. Here we immediately note that you may not need to directly restore the iPhone. Everything in order.

The first step is to try to get your iPhone back in working order without restoring it. This method has saved thousands of iPhones without erasing data, which implies recovery. Therefore, we strongly recommend that you initially use it.

Connect iPhone to computer with USB cable and launch iTunes (Finder window in macOS Catalina).

Enter iPhone into recovery mode. For this:

Note: iPhone must be connected to computer via USB cable.

  • On iPhone 6s, iPhone 6, iPhone 5s, and earlier. Press the Home and Power buttons (power button, located on the side or top of the case) at the same time for about 20 seconds until the iTunes logo appears on the screen (laptop logo in iOS 13).
  • On iPhone 7 and iPhone 7 Plus. Press and hold the Volume Down and Power (Side) buttons at the same time for about 20 seconds until the iTunes logo appears (the laptop logo in iOS 13).
  • On iPhone 8/8 Plus, iPhone X and later. Press and immediately release the volume up button. Press and immediately release the volume down button. Then hold down the side button and hold it for about 20 seconds until the iTunes logo appears (laptop logo in iOS 13).

In the iTunes window, click “Eject iPhone”.

Restart your iPhone. To do this, simply hold down the Power button (side button). Alternatively, you can perform a forced reboot using the method described above.

As a result of this operation, your iPhone can turn on and work again as before without the need to restore.

Connect iPhone to charger

Often, the iPhone won’t turn on and show no signs of life due to the fact that its battery is dead. Connect your smartphone to the charger and leave it connected for an hour.

Here are some important tips to keep in mind:

  • Use original or quality charging accessories. There have been cases in which the iPhone turned off due to a dead battery, but did not charge due to using a broken charging adapter or cable. Be sure to make sure the charger and cable are in working order.
  • Charge iPhone with electricity. It is very common for users to charge their iPhone from a computer USB port. But due to the old battery in the smartphone and the low power of the connector, charging simply does not occur.
  • Check if the connector is dirty. Sometimes iPhone won’t start charging due to a heavily soiled Lightning connector. Examine the charging port. If it is really dirty, clean it gently, for example with a toothpick.

⚡ How to understand that the iPhone has started charging?

If the battery logo with the Lightning cable is on the screen. iPhone does not charge and asks to connect to the charger. If this logo is displayed after you put the iPhone on charge, then the cable or adapter is out of order. Use other charging accessories.

If only the battery is displayed on the screen, then charging is successful. It is worth worrying only if this logo is displayed without changes for more than 30 minutes. In this case, you should also replace the charging adapter and cable.

? Remember how a forced reboot is performed on your device. It can help with most of these crashes that can happen on the iPhone.

A forced reboot is completely safe. Its execution does not delete any data on the iPhone, so you can perform it without fear.

❗ Methods to restore iPhone in this tutorial are arranged from easy to hard. If a hard reset doesn’t work, go to the next method. He will have to help solve the problem.

If all else fails

None of the above methods helped? This means that your iPhone has a physical breakdown and you need to contact a service center.

Why iPhone won’t turn on?

A failed battery is the most common reason iPhone stops turning on. If you previously noticed that the smartphone was rapidly discharged, turned off by 10-30% of the charge, turned off in the cold and any other similar anomalies happened to it, then the problem is definitely with the battery.

Replacement will help. expensive in Apple authorized service centers in Russia. 3000-7000 thousand rubles.

Failure of the power controller is another very common cause of iPhone failure. Symptoms before a smartphone fails are similar to a battery breakdown. accidental disconnections of the device, overheating.

Replacement is relatively inexpensive. You can change the power controller or other microcircuit associated with the charging process for about 2,000 rubles.

Failure of other components. iPhone may not turn on due to the breakdown of dozens of different components, including the motherboard. Most often this happens after the fall of the smartphone. It is possible to determine what exactly broke down only during the diagnosis.

Renovations can be ruinous. If the iPhone didn’t overheat before it broke, then it’s best to start praying right away that the motherboard is intact. Replacing it, especially on newer iPhone models, will cost a pretty penny.

Before going to the service center, we recommend that you contact Apple official support. The company’s specialists will be happy to help with advice.

IPhone 6 / 6S won’t turn on. what to do?

It’s unpleasant when, yesterday, a normally working iPhone suddenly went out and refuses to turn on. While this is a serious reason for some to switch the device to a new one, most owners are not ready to spend money on another phone. We will help you find the source of this behavior of the gadget and tell you how to turn on the iPhone 6 if it turns off and does not turn on. With hardware problems, it is better to contact the service center, but you can fix the software problems yourself. The article tells about the signs by which you can understand why the iPhone 6 turned off and does not turn on, what to do in case of certain hardware problems, and how to turn on the iPhone 6 in cases of software failure.

Battery problems

When the age of the battery reaches two to three years, the destruction of the internal cells of the battery accelerates and the battery begins to quickly lose charge, and then finally fails. Similar symptoms appear due to a breakdown of the power controller, but in such cases the process is much faster, while the battery loses its performance for a long time. Also, a strong heating of the back cover of the phone in the area of ​​the battery indicates a breakdown of the battery.

How to Reset iPhone 6 / 6S If It Won’t Turn On

A full factory reset erases all information and only installs the original firmware. So, if you do not take care of the timely backup, all data will be lost.

To do a factory reset, you need a computer with iTunes and an original USB cable. The sequence of actions is as follows:

  • Connect iPhone to Computer with Original USB Cable.
  • Wait for the program to recognize the device.
  • In the main window of phone settings, find the button “Restore iPhone”.
  • Confirm the action and wait until the end of the procedure. iTunes will restart the smartphone after the restoration is complete.

Frostbite of the apparatus

It is known that Apple smartphones are sensitive to cold, refusing to work sometimes even in minimal frost. At temperatures close to zero, the internal resistance of the lithium-ion battery rises and capacity is temporarily lost. Slim iPhone cases are made of aluminum, which has more thermal conductivity than plastic. Therefore, plastic smartphones of other companies with the same type of batteries withstand the cold much better.

If the smartphone is “frozen”, then in most cases warming up the device will help. Place your phone in a warm, dry place and connect the charger to it. Depending on the degree of “frostbite”, it will take up to 15. 20 minutes to find the phone in such conditions. If the device does not come to life after the specified time, then try turning it on by pressing the power button or “hard” rebooting.

What to do if iPhone screen is black and won’t turn on

“Black screen is on” and no response from iPhone 6, iPhone 5s, iPhone 7, iPhone 6s, iPhone 5, iPhone x is not a rare problem among Apple phone users.

READ  How to View Deleted Messages on iPhone

Although it looks “formidable,” it is usually very easy to solve. See below what to do with such situations.

If your iPhone 5s, iPhone 6, iPhone 5, iPhone 7, iPhone x, iPhone 4s, iPhone 6s, iPhone 4, iPhone 7 plus, iPhone se stopped responding to attempts to bring it into working order and shows its opposition using the so-called “ black screen “, this is not a reason to send it for repair.

There is a simple and quick way to bring him to life using a special computer program.

Program to fix black screen in iPhone

There is a great program that can turn on the iPhone even if the buttons don’t work. It is called “ReiBoot”. Installed on a computer. The translation is really a little lame, but you can figure it out. You can download it here.

In addition to turning on / rebooting, many solutions are integrated into it to fix errors that have arisen in the firmware.

In particular, elimination of freezes on an apple, problems with a black screen, splash screen, screen of death, connecting to iTunes and many others.

The program has been verified. I recommend, although it is not a fact that it will help you, since of course it will not fix hardware problems.

Other Ways to Fix iPhone Black Screen Problem

If the phone is still unresponsive and the black screen does not disappear, connect the phone to the charger and press two buttons at the same time: the wake / standby and start button.

Hold the buttons for about 10 seconds until the Apple logo appears on the screen. In some cases, you may also see a battery icon, which means you need to charge your phone.

A completely discharged battery is the most common cause. In rare cases, the firmware may fly off.

Connect your smartphone to a charger or to a computer / laptop and leave for 30 minutes. If the reason is in the battery, then after half an hour of charging it will definitely turn on.

Another solution when iPhone won’t turn on

This solution is slightly different for different iPhone models. precisely, the way it is performed.

Try in smartphones 4S / 6S simultaneously press “HOME” (bottom on the screen) and “POWER” (side on the case) for 15-20 seconds, and in 7 models POWER and Volume.

In 8/10 models, quickly press and release the “Volume up” button, then do the same with the side button (POWER).

If successful, the screen should display the “burning apple” logo. Release the buttons and wait for launch.

I don’t know why, but it helps many to turn on / off the mute switch several times before performing the steps above (if holding HOME and POWER is ineffective).

If these recommendations above did not give a successful result, then it is regrettable, but the reason may be physical damage to the components.

You can only replace the cable or charger on your own, but it is better to entrust the “insides” to specialists.

NOTE: it has been noticed that sometimes the smartphone does not charge from the charger, but it is charging from the computer or laptop. I recommend you try and see for yourself. Success.

Curve firmware or Jailbreak installed

iPhone may freeze in “brick” state showing “apple” or constantly reboot due to unsuccessful firmware or installed Jailbreak. You can try to reflash the device by downloading a new version of iOS firmware to “tuna” (iTunes). Files are downloaded, here are all links to archives from the official Apple website or from the IPSW service for hacked gadgets. The whole procedure is described in detail here.

After flashing, do not forget to restore the backup saved on your computer.

Burnt out charge controller

When charging from a fake device or a bad cable, and due to voltage surges, the power controller may burn out. Often this happens from charging in a car, shock, moisture. The iPhone power controller is a microcircuit that is responsible for distributing and regulating the supply of power to all nodes on the motherboard and peripheral components. To fix it, you need to completely open the device, so you cannot do without the help of specialists. Replacement will cost from 1,500 rubles on older models of smartphones, and up to 8,000 on newer ones in unofficial services.

What to do if iPhone won’t turn on and doesn’t respond to anything

Sometimes gadgets fail at the most inopportune moment, forcing us to explore the Internet in search of answers. The iPhone is no exception. Today we will figure out what to do if the iPhone does not turn on, does not charge and does not respond to pressing.

We follow our instructions, built on the principle from a simple solution to a complex one. The manual is universal and suitable for all models: 4, 4s, 5, 5c, 5s, 6, 6 Plus, 6s, 6s Plus, SE, 7, 7 Plus, 8, 8 Plus, X, XS, XS Max, XR, 11. 11 Pro, 11 Pro Max.

  • The charge level disappears before our eyes, 10 minutes was 90%, now 20%,
  • The apple logo is on, it suddenly goes out, and then it does not load,
  • Display blinks cyclically,
  • Sometimes after a successful turn on, iOS shamelessly lags, glitches, slows down, lives its own life, and then hangs tight,
  • Knocked out after talking or uninstalling an app.
  • To start
  • Connect to charger
  • Do a hard reboot
  • After frost or extreme heat
  • Main reasons
  • Lightning connector is broken or clogged
  • The battery died
  • The power button is broken
  • Burnt out charge controller
  • Faulty motherboard
  • Falling or drowning
  • Curve firmware or Jailbreak installed
  • Malfunction in the screen or video adapter
  • Question answer
  • Conclusion
  • Video

The power button is broken

If you feel an odd tactile response when you press it, or if you don’t click, there may be a problem with the power button. The key itself is made of durable aluminum, but there is a fragile spring contact underneath. Metal crumbles due to impact or excessive pressing, blocking the operation of the power button itself.

To turn on the equipment, it is enough to apply voltage to the power controller. Simply put, plug in the charging cable.

To turn off and restart the device for a while, you can set the AssistiveTouch virtual button. By displaying the AssistiveTouch item in Settings General Accessibility.

Connect to charger

Put your smartphone on charge, it is possible that it is simply discharged. After a while, after connecting the wire (we advise you to wait at least 15 minutes), the iPhone should show signs of life: a silhouette of a battery or a logo will appear on the screen, after which iOS will start loading.

If it does not turn on, and the red battery icon glows on the screen (the smartphone is connected to the charger), the charging is faulty and should be changed. Check the power cord and power supply on the other phone. The problem may be in non-original charging, try looking for the original kit or its MFI Lightning counterparts.

iphone, turn

We recommend inspecting the Lightning charging connector, the rectangular hole is often clogged with dust and dirt. Detailed instructions below.

Alternative Chinese kits often fail, they are short-lived, lose compatibility with the device over time, can spontaneously ignite the iPhone, or simply stratify and crumble. Often a defect occurs inside the insulation, a copper vein inside may break off, and a working-looking cord will stop charging the phone. The highest quality of the non-original. chargers from ROCK and ORICO, there are no complaints about them.

If the smartphone fails to start after 15 minutes, the screen remains black, the backlight does not even turn on, or an image of a socket and lightning appears, the battery has been discharged to zero. Most likely, you will have to change the battery to a new one, but more on that below.

Question answer

It happens that after updating iOS, and sometimes after a simple call or deleting an application, the display goes out and the device does not turn on anymore. At most it hangs an apple and the screen goes out again, and so on in a circle.

Two options will help: Hard Reset and flashing.

Will help “hard” reboot or contact the service center.

DFU (Device Firmware Update) mode is used to flash or restore iOS. In this case, the information will be erased without the possibility of recovery (which explains the name of the method). With a fresh backup, all data can be returned to the phone.

Connect your smartphone to your computer via USB and open iTunes. Further actions depend on the device model:

  • For iPhones older than the 7th generation, hold down the “Power” and “Home” buttons for 20 seconds until the iTunes logo lights up on the screen.
  • For models 7 and 7, simultaneously with the “ON” key, press the volume down button until the media player logo appears.
  • For smartphones from model 8, click “volume up”, “volume down” and hold down the side button until the iTunes symbol lights up.

After connecting the phone to the program, we will try to press the “Refresh” button first, and if it works, all the data will be saved. If it does not help, we confirm the “hard” reboot, which will take 30-40 minutes and require the Internet without interruption. It is important not to disconnect the smartphone from the cable until the end of the procedure.

Main reasons

If your case did not fall under the above scenarios, you may have to replace entire modules. Tens of thousands of components make up an iPhone, here are the main parts of the device that can cause problems.

Iphone 6 plus. dead won’t power on, non responsive, battery not charging

The battery died

This is the most common reason iPhone won’t turn on, other than charging problems. A sign of battery failure can be a sudden shutdown at a 10-30% charge remaining, a regular shutdown at a cold temperature (below 1 degree). A failed battery can be replaced: the cost of work together with a spare part will be about 2.000. 7.000 rubles. in the official service and at half the price of unofficial.

If the phone starts to revive after a long period of non-use, for example, it has been left in a drawer on the desktop for a long vacation, the battery may be deeply discharged (“sleeping battery”). In this case, the destruction of chemical bonds inside the battery occurs, and as a result, the voltage decreases to 1-2 volts. The power controller on the motherboard detects a critically low battery level and blocks the battery charging. Voltage blocking, protects the Li-ion battery from swelling, and prevents damage to the electronic filling of the iPhone.

Any complete discharge is a risk of loss of performance, you should not bring the phone’s energy to zero. Experts advise keeping the charge in the 80 to 20% range.

You can try to push the battery, but for this you have to remove the battery by disassembling the case. After removal, connect the cell to a universal charger, commonly called a “frog”. Thanks to the direct power supply circuit, there is a chance that the battery will come to life.

But this is a temporary solution, continue to monitor the device: the battery may be discharged too quickly and then you cannot do without a replacement in the service.

READ  How to remove open applications on iPhone

Charging the battery correctly

What to do if iPhone won’t turn on after updating? If the charge is at zero, then the gadget needs to be recharged for at least 1 hour. Also worth doing if iPhone X won’t turn on.

In cold weather, the battery will drain quickly. In this case, the phone needs to warm up to room temperature, then it is charged. If this condition is not met and a cold smartphone is charged, the temperature difference will lead to the formation of condensation, a short circuit will occur, and the gadget will stop functioning.

If charging did not help, iPhone 6 does not turn on after the update, a hard restart will help.

What to do if iPhone won’t turn on after updating

If you have a question about what to do if the iPhone does not turn on after updating, you should investigate the reasons that caused this problem.

Hard reboot

How to turn on iPhone after update? A hard restart is required. In half of the cases, this manipulation will help “revive” SE or another model. The user needs to simultaneously hold 2 buttons: console and side, which includes the gadget. We wait 3-5 seconds.

The reasons

If the device has been in operation for more than one year, the iPhone was often repaired, its parts were changed, then the iPhone does not turn on after the update due to “smart” automatic diagnostics.

This system is built into the new firmware to restrict users of Apple products so that they do not install analogs of lower-cost components on the iPhone.

When updating the OS, the serial number of the microcircuit tied to the “motherboard” is checked. If the spare part is not original, the smartphone will turn off.

Why won’t iPhone 5s turn on after updating? Starting with version 5 devices, the fingerprint scanner has an identification number that is tied to a unique processor identifier. If you replace it, and the phone is not reflashed, it will not turn on.

An OS bug, due to which it is impossible to turn on the device, is not always associated with an updated firmware. Sometimes another chip is damaged that previously functioned normally.

A list of other reasons due to which the gadget does not work:

  • Battery discharged.
  • The device is overcooled.
  • The “save” mode is on.
  • System memory chip not working.
  • In the location where the user is located, for some unknown reason, the phone is not tied to the system provider.
  • The OS crashed because it was performing a factory reset or otherwise.
  • iPhone 5 after updating does not turn on due to breakage of the on / off button.

If the cause of the malfunction is simple, the user will be able to restore the operation of the device on his own. But it is better to trust the employees of the service center, especially if the smartphone is under warranty service.

Recovery using Apple branded software

If the previous methods did not help and the iPhone 6s does not turn on after the update, it is recommended to follow the procedure:

  • The outdated iTunes software from your PC is removed and reinstalled. We find it on the official website of the developer. There is a high probability of damage to the old version of the program by viruses, so it does not function properly.
  • We connect the device to a PC to synchronize it with iTunes when the gadget is operating in Device Firmware Update mode.
  • If iOS version 10 was installed, it is better to try version 9 as it works more stable. A return to the previous system is necessary if the phone cannot be rebooted on an updated iOS.
  • We connect the smartphone to the PC, wait for the moment when iTunes is activated.
  • The power button and “Home” are clamped and held until a window appears prompting you to restore and reset the software.
  • We select the recovery mode, we wait until the procedure is over.

It is recommended to use a backup of all information on the phone, because after the upgrade, the system sometimes crashes, the firmware flies, the OS needs to be reinstalled, and all data will be deleted.

iPhone 6 could

In addition to battery problems, the iPhone not turning on can be attributed to human error. This is especially common when the phone is carried in a trouser

The connector of the device is clogged with dust and dirt, and the next time you try to charge it, the iPhone just breaks. This problem is not very serious, since any service center can fix it in a few minutes for little money.

iphone, turn

Why and how to decide

There are a lot of reasons why the iPhone 6 turned off and won’t turn on.

Enlarged, they can be divided into the following:

  • complete discharge of the apparatus;
  • software problems;
  • hardware problems.

Software problems are easier to solve, in a situation with hardware problems, the solution is more complex and expensive.

If this does not help, then you need to try to put the device into recovery mode. To do this, hold down the “Power” and “Home” buttons for 30 seconds.

In a situation where such an elementary solution to the problem, together with a thorough charging of the battery, did not solve the problem, perhaps the reason for the non-working device is as follows:

  • the battery of the gadget is faulty (it needs to be replaced with a new one);
  • damaged adapter or USB-cable (you need to replace the adapter or USB-cable);
  • the cable connector is dirty (it is necessary to clean the cable connector);
  • low-quality (cheap) cable (replace it with the original one);
  • mechanical damage to the connector and other mechanical damage, for example, when dropped, wet, after charging in a car, etc. (you need to contact the service center);
  • marriage (you must contact the place of purchase).

It is also possible that the iPhone may not turn on after a firmware update.

There are three different scenarios, depending on when the failure occurred during the firmware update:

  • reflash the phone again;
  • replace the faulty NAND Flash. This is a memory chip that stores all the owner’s personal data;
  • replace the failed Nor Flash. This is the memory chip of the GSM module. All parameters of mobile operators are stored there. Without these parameters, the device will not be able to call.

Fill with liquid

Moisture on the phone or even flooding it with liquid is not uncommon. IPhone problems can begin not only when drowning it in a pond, but even when exposed to light rain. In this situation, the gadget may start to fail.

How to fix Apple iPhone 6s that won’t turn on

In this case, cleaning the device or component repair of the motherboard is highly desirable. In this case, it is important to stop using the phone immediately if moisture gets inside the device.

The solution to the problem is not entirely trivial, so it is recommended to seek help from a certified service center and avoid problems that may arise in the future.

What to do, iPhone 6 won’t turn on

Unfortunately, even with such a high-tech and reliable device like the iPhone 6 Plus, an unpleasant situation can happen.

Violation of operating conditions, an absurd accident, and sometimes a factory defect, can cause a smartphone to fail. One of the most common problems is the situation when the device does not respond to pressing the “Power” key.

Sooner or later, but this question is faced by most iPhone users. The problem related to the inability to turn on the iPhone. quite common. Each generation of iPhones has its own characteristics of this problem. The first thing to do is connect your iPhone 6 to the original charger.

Most often, the culprit of the breakdown is the “Power” button itself, which has a damaged contact pad or cable. The reason most often lies in the ingress of moisture into the case or in mechanical damage to the part caused by the phone falling. Also, often the refusal of the smartphone to turn on is due to a serious malfunction in the software or failure of the power system controller.

Power and charging problem

If your iPhone 6 can’t turn on, it’s likely a power or charging problem. First of all, you should try to charge it. over, you need to connect it to the charger for at least 20 minutes from the adapter and 30 minutes from the workstation.

After that, you need to try to start the iPhone without disconnecting from charging. If everything is normal, the display will show a lightning symbol inside the discharged battery.

When the battery of an Apple smartphone is discharged to zero, after a short charge, when you press the power button, the display shows a picture showing a socket with a lightning symbol.

The way out of this situation is to charge the device for a longer time. In this case, the charging time must be at least 3 hours.

There are situations when the connector through which the phone is charged fails when using non-original charging.

It is very important to know how you can safely charge your iPhone 6 in your car, and even more important to follow these basic rules. This leads to dire consequences. At best, the iPhone battery needs to be replaced. At worst, it is replacing the power controller or repairing a failed power circuit.

How to create email on Yandex for free? The answer is here.

Drop to the floor

The problem with turning on the iPhone may be due to mechanical damage, namely, falling to the floor. It is important to remember whether the fall was a certain time ago, since the peculiarity of this situation is that problems with the smartphone may begin to manifest themselves quite a long time after the fall.

Flawless appearance (without scratches and other visible flaws) does not mean that there are no problems with it.

Alternatively, one of several loops can snap off:

  • power cable;
  • display cable;
  • battery cable.

A more serious situation is associated with a violation of the soldering on the motherboard or damage to one or more microcircuits.

IPhone users may encounter a situation where the device has turned off and will not turn on. If you do not consider the simplest options, when the battery was simply not charged on time, then, most likely, the matter is in malfunctions of the boot data block of the operating system of the gadget.

This problem can be solved if you try to restore the partition by connecting the smartphone in DFU mode.

How to properly crimp an internet cable? Instructions here.

How to make your presentation on a computer? Create here.

Often, a hard reset will help to get the device out of this position, and if moisture or mechanical damage gets inside it, it is better to turn to professionals.