IPhone 5s won’t turn on after battery replacement

Table of Contents

Iphone 5s does not turn on after replacing the battery

iphone, turn, battery, replacement

Causes

DELETE

  • Defective battery, most often just a Chinese counterfeit iphone battery sold under the guise of the original.
  • The battery capacity does not correspond to the declared characteristics of the phone, most likely, again, a fake.
  • They broke the loop of connection to the motherboard or any other. it is necessary to carefully examine all the “insides” for damage to the conductive elements.
  • Broken connector on the board. breaks as a result of inaccurate connection of the ribbon.
  • Not fully fixed train.
  • Incorrect assembly of the device, for example, a long screw punctured the conductive track, causing a short circuit.
  • Other damage due to mechanical impact.

If after replacing the iphone battery, of any model, it does not turn on, you should try to fix minor problems yourself. Especially if you know which side to take the screwdriver from. If you are not ready to take risks or do not know how to handle electronics, it is better to entrust the work to a knowledgeable master.

How to return the device to work if the iphone 5 does not turn on, after replacing the battery with a new one you just bought?

We have sorted out the most common problems with replacing the battery on the iPhone, but many other reasons are left behind, more rare ones, in the following articles we will definitely tell you about them. That’s all, good luck and take care of yourself and your gadgets. And yes, I almost forgot, by tradition, the video instruction.

IPhone 5S refuses to turn on after battery replacement. if you’re familiar with this problem, we know how to help you. The malfunction most likely affects the standard battery of the mobile device or the microcircuits that are responsible for its operation. Not surprising: Apple equipment is complex and high-tech, but, despite the reliability of many components, it is quite sensitive to operating conditions.

  • “IPhone” refuses to turn on after replacing the battery (branded or equivalent).
  • iPhone does not respond when the charger is connected (charging lights do not light up).
  • The device started working after installing a new battery, but then turned off and does not respond to user actions.

IPhone models 5, 5S and older often do not turn on as a result of battery replacement due to the following reasons:

Symptoms

  • The device turns on while charging, but immediately turns off as soon as you remove the charger
  • iPhone won’t turn on even when charging
  • The phone does not turn on with a new, just purchased battery
  • iPhone 7 won’t turn on or work after replacing battery in a workshop

Tip: Even such a seemingly simple repair as replacing the battery is best entrusted to trusted craftsmen. Only a professional can competently and quickly replace such an important part, you will not have to bite your elbows later and overpay for burned or damaged phone modules.

How to fix iPhone 5 battery problem

Unfortunately, there is nothing else you can do: a new battery, cables, chips and other spare parts are reliably hidden from the user’s eyes in a one-piece case that cannot be disassembled outside the service center. Accordingly, you need to contact specialists who will solve your problem.

Professionals from the “Spravnik” service center will carry out diagnostics and repair the “iPhone” on the road. Indicate your home or work address, and they will quickly arrive at you, armed with everything they need. Each master has the necessary set of tools for work with him, and our offices are very densely located on the territory of Moscow.

  • leave a request to our manager. This can be done in several ways: dial our phone number (the number is indicated at the top of the page), indicate contacts for a call back or write a message in the online chat;
  • the operator will contact you within 1 minute, listen to the essence of the problem with the iPhone 5 and accept a request for repair;
  • from the office nearest to you, our master will go with everything necessary for diagnostics;
  • a specialist will find the cause of the malfunction and eliminate it within 15-30 minutes (in exceptional cases, it will take more time).

The competitive advantage of Spravnik is a huge base of components for the iPhone 5, which we purchase at wholesale and install into our clients’ mobile devices without extra charge. Our catalog contains original spare parts, which is especially important when replacing the iPhone battery. Accordingly, if after replacing the battery “iPhone” does not turn on, we will quickly and inexpensively eliminate the malfunction. It is convenient with us, because we are within walking distance and work from Monday to Saturday, and our staff includes professionals with extensive experience in repairing Apple equipment.

If you have an iPhone 7 or iPhone 7 Plus

Press and hold the Power button and the volume down button on the left for 15-20 seconds, after which the Apple logo will appear on the screen.

If you have an iPhone 2G, iPhone 3G, iPhone 3Gs, iPhone 4, iPhone 4s, iPhone 5, iPhone 5c, iPhone 5s, iPhone 6/6 Plus, iPhone 6s / 6s Plus, iPhone SE (2016), or iPad with a Home button

To reanimate the above iPhone and iPad models, just press and hold the Power button and the Home button simultaneously for 15-20 seconds, after which the Apple logo will appear on the screen.

Your iPhone or iPad battery is completely discharged?

If your iPhone or iPad is discharged, connect it to the power adapter and charge it for 15 minutes, then try to turn it on without disconnecting it from the charger.

If the battery is completely discharged, then sometimes after 5-15 minutes of charging, by pressing the power button, you can see an image with a lightning and an outlet on the screen of a smartphone or tablet. This means that not enough time has passed since charging started. Wait a little more.

On the left is a screenshot of an iOS device that is not connected to the charger, on the right. it is charging:

If you have an iPad equipped with a Face ID scanner (without the Home button)

This method is completely identical with the latest iPhone models: you need to press and quickly release the volume up button. Then press and quickly release the volume down button. Then press and hold the power button until the device restarts (Apple logo appears).

iPhone 5 Logic Board Pry Damage after Battery Replacement

If you have an iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max, iPhone XR, iPhone SE (2020), iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 12, iPhone 12 mini, iPhone 12 Pro or iPhone 12 Pro Max

Press and quickly release the volume up button. Press and quickly release the volume down button. Then press and hold the side button until the Apple logo appears.

READ  How to turn off key sound on Samsung

iPhone or iPad is frozen, does not turn on, or does not respond to buttons. What to do?

Don’t panic if your iPhone or iPad won’t turn on or respond to buttons when you try to turn it on. There are two ways to quickly bring it into working order, which we will tell you about.

The first two reasons the iPhone won’t turn on are not related to hardware or software glitches. Most likely, the smartphone is simply discharged, and it needs to be recharged, or it freezes, in which case a forced reboot will help.

iPhone or iPad is frozen, won’t turn on or respond to buttons (may be black screen)

A common problem. A fully charged iPhone (iPad) is frozen (the program is frozen) or has completely turned off. Pressing the screen or the side button, unfortunately, does not lead to anything and does not start the device.

Do not worry! In 99%, nothing terrible happened, the smartphone automatically went into the so-called “save mode”, this happens if you very rarely restart the device.

It should be noted that resuscitation methods may differ depending on the device model. so.

This ensures a 5s battery life ?

The merit is not only the availability of a medium-capacity rechargeable lithium-ion battery, but also in optimizing the energy consumption of the iPhone 5s device, as well as in using the modern iOS operating system. If your iphone 5s battery does not turn on after replacing the battery, additional diagnostics are performed

IPhone 5S Battery Replacement

The lowest for original iPhone 5S batteries. Before replacing, we always make diagnostics of the battery and the motherboard for free to accurately determine the malfunction and eliminate it. battery replacement for iphone 5s price moscow

Battery issue on iPhone 5s. turns off in the cold

The owners of these technically advanced devices sooner or later face one problem. iPhone 5s shuts down in cold weather. And this, as a rule, does not happen at the lowest temperature.
For what reasons is this happening?
One of the biggest problems is Apple’s lithium-ion battery used in Model 5. When the temperature reaches below zero, the ions in the batteries lose their properties. What does this mean and what does it lead to? To an increase in internal resistance, respectively. this leads to a loss of capacitance. That is why smartphones iPhone 5s suddenly turn off, despite the presence of a sufficient percentage of the charge.
But why does this not happen on every 5s smartphone??
This is due to the wear and tear of the lithium-ion battery, which has a certain number of “charge-discharge” cycles. As a result, the battery capacity is reduced (typically 500 to 700 cycles are typical).
What to do in this case?

The only correct solution is to replace it, and after installing a new battery, which will withstand loads of work in negative temperatures, the probability of an unexpected shutdown will disappear.

Battery for iPhone 5s

iPhone 5S. it is one of the most popular models of smartphones from Apple, which is distinguished by a high level of workmanship. In addition to the presence of modern functions, it uses a sufficiently capacious battery that provides a sufficient duration of the device’s operation. What is the battery capacity of the Iphone 5s? 1560 mAh (mAh). this is the kind of lithium-ion battery used in this smartphone. By the way, compared to the usual 5th, the capacity is increased by several percent (the classic 5th iPhone model has 1440 mAh). This rechargeable battery provides long-term autonomous operation. from 8 to 250 hours. By the way, the classic 5 model has an idle battery life. 225 hours. According to the given data, the iPhone 5C can work without the need to connect a charger during a conversation on a 3G network for up to 10 hours, the same margin is observed while working on the Internet (Wi-Fi and LTE networks).

When to change the phone battery?

Experts say that the iPhone 5 S needs a battery replacement once a year. Otherwise, the gadget will constantly malfunction and “glitch” due to an elementary loss of power supply capacity. In principle, if the operation of the iPhone is not so intense, and its owner is not particularly bothered by the fact that the phone does not work as fast as before, you can change the battery less often.

However, there are a number of indications that a battery needs urgent replacement. For example, if after a light load in the form of a five-minute conversation or several SMS messages, the phone immediately discharges more than three percent. the iPhone 5S battery needs to be replaced. Also, when the gadget starts to turn off autonomously when the charge is 20 or 30 percent, and when you try to wake it up, it does not start, but starts displaying a screen when turned on, indicating that the battery is discharged. it’s time to change the battery.

When the iPhone5 does not turn on, the problem is most likely also in a dead battery. You can check this very easily by connecting it to the charger. If the battery does not even begin to charge, it is likely that it has already completely exhausted its resource, and you need to try to repair the iPhone 5 yourself.

By the way, when the iPhone 5S does not turn on and the battery does not charge, the reason may not be only in it. The internal components of the phone can be damaged directly. Of course, you can only find out on your own by disassembling the iPhone case and carefully examining its other elements. It may well turn out that the problem is solely in the battery. which happens most often if the owner handled the phone carefully.

A little from the history of the “five” and its battery

Of course, this was a remarkable, but isolated case. Now, if the battery fails, no manufacturer will make such an offer to anyone. over, batteries often sit down not through her fault, but because the load on them is very large. You can find out how much it costs to replace the iPhone 5 battery on the website of any company that repairs mobile phones. are indicated, as a rule, from 1,500 rubles. But in reality, the cost of the service may turn out to be more expensive. Therefore, it does not hurt to think about how to change the battery on the iPhone yourself.

Replacing the iPhone 5S battery with your own hands is not that difficult. The main thing is to arm yourself with the necessary set of tools for this. And remember that adherence to accuracy and consistency in actions is the most important factor on which the result will directly depend.

What do you need to replace the battery with your own hands

Replacing the iPhone 5S battery is not that difficult. But in order to do everything as accurately as possible, it is better to use special tools. On AliExpress, you can purchase screwdriver sets designed specifically for disassembling Apple devices. They are inexpensive, but they can come in handy at any time, so they will definitely not be superfluous. Typically, the kit includes a suction cup, screwdrivers, including a cruciform and pentalob. In addition, the set includes a flexible plastic spatula designed for gentle work with fragile parts of the iPhone case.

How to change the battery on the iPhone 5S and other “fives”?

One of the most popular and demanded models of smartphones not so long ago was the iPhone 5. Of course, several more modern and “advanced” models have already come out after it. at least iPhones 6 and 7. But since not everyone keeps up with new products, there are users who have which he is to this day. Considering the high intensity of use of phones by most owners (constant access to the Internet, games, conversations, special applications), such a question as replacing the iPhone 5S battery is very relevant. In addition, when the gadget is constantly under heavy load and is used around the clock, the question of replacing the battery can very soon arise in front of the owner rather acutely.

How to change the battery

The following is a simple step-by-step instruction:

  • First, turn off the phone.
  • Using a “pentalob” screwdriver, unscrew two screws in succession, which are located on the right and left in relation to the charging connector.
  • We attach a suction cup to the display and pull it towards ourselves, prying it with a spatula. There are latches on the side ends and on the bottom, they need to be forced to “snap off” as carefully as possible. In the process, do not touch the end from above yet, disconnect it last, so as not to damage other latches.
  • After all the latches are safely removed, you can detach the screen. just along the end of the top, since it is in this place that there are elements of the phone that can be easily damaged.
  • Now we look up, to the right of the battery. There you need to unscrew the metal gasket that holds the loops with a Phillips screwdriver. It is necessary to carefully lift the gasket and disconnect all three loops in series. Proceed with caution. Damage to the cables will lead to the fact that after replacing the battery, the phone simply will not turn on.
  • Remove the screen and put it aside for now.
  • After disconnecting all the cables, remove the old battery from the compartment. Removing it may not seem so easy due to its secure glue. Gently pry the battery with a plastic spatula.
  • After the old power supply is removed, the battery compartment can be stripped of the old glue.
READ  How to Reset Screen Time Passcode on iPhone

Next, you need to insert a new battery into the compartment and do everything in the reverse order: arrange the three cables in the desired order, connect the case and the screen with latches and screw the detachable screws. After replacing the battery, turn on the gadget and, if the new battery is free from defects, the phone should turn on and work as always. The new battery is charged as usual. Learn more about charging lithium-ion batteries →

All “fifth” gadgets are similar in their device, and this scheme can be used for both the iPhone 5 and the iPhone 5 C and 5 S.

As you can see, replacing the battery on the iPhone 5 is not that difficult. Especially if there is a desire and incentive to do it yourself, without resorting to the help of a service center. Since the article sequentially reflects all the steps of the process and says which tools are best to use, you can decide for yourself whether you can do this work. If you are interested in electronics and want to learn how to do something yourself, the process will be not only educational, but also interesting for you.

After the fall

If the iPhone falls and does not turn on, although there is no visible major damage, most likely one of the cables has come off during the fall. Try restarting the device if it does not work. it is better to solve this problem in the service center, especially if the phone is still under warranty. But mechanical damage is not covered by the warranty, so repairs will have to be paid.

With a complete shutdown, you can independently unwind the smartphone, remove the back cover and inspect the contact. but only if you have enough confidence that you will not damage the microcircuit with your actions even more.

If the screen is black

When the iPhone looks at you with a blank, black screen, don’t panic. This does not mean that it is finished. Most likely, the reason is that the battery is completely discharged. The second reason may be a frozen iOS. It is easy to rehabilitate the device. The main thing is to do exactly what we tell you.

If the reason that the battery is discharged is the long stay of the iPhone in the cold, then first you should warm your device in your palms. Then connect the device to the charger for fifteen minutes. If the reason for the non-working iPhone is in a discharged battery, it will soon turn on. If this did not happen, it is possible that the frozen iOS is to blame. Then you need to simultaneously press the HOME and POVER buttons and hold them there for ten to twenty seconds. You will soon see an apple on the screen. Release the buttons and after about a minute iOS will launch.

If in this case the long-awaited apple does not burn, we will tell you what to do. You need to turn silent mode on / off on iPhone two to three times in a row. Then plug in the charger for fifteen minutes. This operation, as a rule, always gives a positive result.

If these steps are unsuccessful, try changing the charger and cable. Perhaps they are the ones responsible for the iPhone not turning on. If, moreover, you are using not the original, but a cheap Chinese fake, this may be the reason.

Eternal apple mode

IOS crashes. due to improper update, firmware, or jailbreak. sometimes put the device into eternal apple mode. At the same time, you see a dark black screen, on which the apple periodically burns and goes out. If the regular iTunes restore does not turn on and attempts to restart the iPhone are unsuccessful, try a hard reset.

To get the iPhone 5s or other Apple device out of this state, the firmware in Recovery mode or DFU mode will help. In the first mode, the gadget’s settings will be completely reset, it will return to the factory settings. In the second, a deeper update is launched, with the restoration of iOS system components. Both modes can be started if you have forgotten the password from the device.

DFU mode solves the most difficult problems. To get into it, hold down the power off key of the device, after 3 seconds. additionally press “Home” or decrease the sound. for iPhone 7. for 10 seconds, release the power, and hold the second button until the boot sound. Connect to iTunes, start recovery.

Hardware malfunction

If none of the methods described above helped you, it is most likely that the problem is in the hardware of the smartphone. There may be several reasons:

  • Normal wear and tear of electronic components
  • Ingress of water or other conductive liquids into the device
  • Battery malfunction
  • Malfunction resulting from the use of non-original accessories. charger, cable
  • Damage to smartphone connectors

Do not try to disassemble the iPhone yourself, even if you suspect a specific malfunction. Unskilled intervention can end badly for your iPhone, entrust this work to professionals.

iPhone has turned off and won’t turn on. contact the service center, an attempt to repair yourself will only aggravate the situation and increase the cost of further repairs.

To start

Remember! Li-ion batteries have a lifespan of about 3-4 years, or 300-400 charge-discharge cycles.

If the smartphone lasts longer than this time, it’s definitely time to go to the workshop.!

The battery died

If the phone starts to revive after a long period of non-use, for example, it has been left in a drawer on the desktop for a long vacation, the battery may be deeply discharged (“sleeping battery”). In this case, the destruction of chemical bonds inside the battery occurs, and as a result, the voltage decreases to 1-2 volts. The power controller on the motherboard detects a critically low battery level and blocks the battery charging. Voltage blocking, protects the Li-ion battery from swelling, and prevents damage to the electronic filling of the iPhone.

Any complete discharge is a risk of loss of performance, you should not bring the phone’s energy to zero. Experts advise keeping the charge in the 80 to 20% range.

You can try to push the battery, but for this you have to remove the battery by disassembling the case. After removal, connect the cell to a universal charger, commonly called a “frog”. Thanks to the direct power supply circuit, there is a chance that the battery will come to life.

But this is a temporary solution, continue to monitor the device: the battery may be discharged too quickly and then you cannot do without a replacement in the service.

Voltage drops

Apple technology is very demanding on the quality of the incoming current, respectively, their chargers are made in a special way, have a complex design and principle of operation. If you charge it with a non-original device, then even a small voltage surge can damage your smartphone.

With a voltage drop, the power controller mentioned above suffers. It can be replaced, the cost, thank God, is small, but an unpleasant aftertaste remains, and you don’t want to part with your favorite gadget for a long time.

READ  How to connect iPhone to TV for watching

After car charging

The problem is that some people don’t know how to choose the right car charger for their iPhone. People are trying to save money, accordingly they buy the cheapest options, which do not always have at least average quality.

After using low-quality charging, it may fail:

  • battery;
  • charging connector;
  • power controller;
  • specific power supply circuit.

As you can see, a small savings on the charger can translate into a decent amount for repairs.

If the phone stops turning on after using a low-quality car charger, there is nothing left but to carry it to a service center. Trying to determine the breakdown yourself, or, moreover, to repair the smartphone is by no means worth it, since inexperienced hands can render the phone unusable.

DIY repair

It seems like the cheapest and most reliable way, but not always. It happens that after self-replacing the screen module on the iPhone 5, it no longer turns on, the causes and symptoms were discussed above, now we will find out how to fix it all. By tradition, there will be a video instruction at the bottom of the article.

  • We check the module on another iphone 7 or other suitable model, if it refuses to work on a patient.
  • A hard loop, from a non-original Chinese spare part it becomes a headache, to eliminate this, it is enough to glue a piece of soft material, for example, a sponge for washing dishes.
  • We check the correct position of the screws, long screws interrupt the conductive paths on the lower boards and lead to delamination.
  • Conductive tracks can also be restored with your own hands, how to do it correctly, look at the video.

What to do iPhone won’t turn on after replacing display module?

There are quite a few such stories, the low qualifications of workers who study by video from YouTube have made a lot of devices unusable. Today, in this article, we will give a clear answer, what to do if the 8, 7, 6 or iphone 5 does not show signs of life after replacing the display module.

Symptoms

Symptoms of the problem can be found across the entire line of Apple smartphones, the list will be relevant for many users.

  • iphone 5s does not turn on after contacting the wizard who replaced the shattered screen
  • The device refuses to start after replacing the case (applicable for the entire line, from iphone 4 to iphone 8)
  • The device starts up, but the screen does not turn on, sometimes the backlight may be on
  • iTunes recognizes iPhone 7, but display on iphone won’t light up.
  • In some cases, after using Chinese charging, there are problems with the power controller, even after replacing the u2 microcircuit.

Repairs

Everything can be repaired, another question is whether it will be profitable as a result. Sometimes it is easier to throw away some of the microcircuits and replace them with new ones than to try to repair a dead patient. In this section, we will try to fix the iphone 5 with our own hands, which does not show signs of life, after replacing the screen.

Causes

There can be many reasons why the iPhone won’t turn on. If you recently took your phone from the service after replacing the display and your 5 does not turn on, then you have come to the right page. Usually, if the iphone 5s, 6, 6, plus, 7, 7 plus, 8 does not turn on after repairing the screen, the problem is in the wizard who dealt with your device or in your wrong actions when he changed the display himself. A person made a mistake at some stage in the assembly or disassembly of the iPhone.

  • The screen module is defective (defective or not original).
  • The loop from the monitor module is broken.
  • Burned out power controller u2.
  • During assembly, the screws were mixed up and screwed into the wrong slots, as a result, a short circuit.
  • PCB delamination due to improper assembly.
  • Breakage of conductive tracks.

Repair in service

An expensive pleasure, but worth it, especially if the iphone 5 does not show signs of life after the repair made by you personally. Reworking the work of the wizard after replacing the display or after replacing the case with an iphone 6 can be very expensive, since an unskilled person can make mistakes that are fatal for the equipment.

, especially if you have to re-solder the U2 controller or any other module.

What to do iPhone won’t turn on after replacing display module?

There are quite a few such stories, the low qualifications of workers who study using videos from YouTube made a lot of devices unusable. Today, in this article, we will give a clear answer, what to do if the 8, 7, 6 or iphone 5 does not show signs of life after replacing the display module.

iPhone 5/5s/5c/SE: Won’t Charge, Won’t Turn On, Black Screen NO PROBLEM!

Repair in service

An expensive pleasure, but worth it, especially if the iphone 5 does not show signs of life after the repair made by you personally. Reworking the work of the wizard after replacing the display or after replacing the case with an iphone 6 can be very expensive, since an unskilled person can make mistakes that are fatal for the equipment.

, especially if you have to re-solder the U2 controller or any other module.

Causes

There can be many reasons why the iPhone won’t turn on. If you recently took your phone from the service after replacing the display and your 5 does not turn on, then you have come to the right page. Usually, if the iphone 5s, 6, 6, plus, 7, 7 plus, 8 does not turn on after repairing the screen, the problem is in the wizard who dealt with your device or in your wrong actions when he changed the display himself. A person made a mistake at some stage in the assembly or disassembly of the iPhone.

  • The screen module is defective (defective or not original).
  • The loop from the monitor module is interrupted.
  • Burned out power controller u2.
  • During assembly, the screws were mixed up and screwed into the wrong slots, as a result, a short circuit.
  • PCB delamination due to improper assembly.
  • Breakage of conductive tracks.

DIY repair

It seems like the cheapest and most reliable way, but not always. It happens that after self-replacing the screen module on the iPhone 5, it no longer turns on, the causes and symptoms were discussed above, now we will find out how to fix it all. By tradition, there will be a video instruction at the bottom of the article.

  • We check the module on another iphone 7 or other suitable model, if it refuses to work on a patient.
  • A hard loop, from a non-original Chinese spare part it becomes a headache, to eliminate this, it is enough to glue a piece of soft material, for example, a sponge for washing dishes.
  • We check the correct position of the screws, long screws interrupt the conductive paths on the lower boards and lead to delamination.
  • Conductive tracks can also be restored with your own hands, how to do it correctly, look at the video.

Symptoms

Symptoms of the problem can be found across the entire line of Apple smartphones, the list will be relevant for many users.

  • iphone 5s does not turn on after contacting the wizard who replaced the shattered screen
  • The device refuses to start after replacing the case (applicable for the entire line, from iphone 4 to iphone
  • The device starts up, but the screen does not turn on, sometimes the backlight may be on
  • iTunes recognizes iPhone 7, but display on iphone won’t light up.
  • In some cases, after using Chinese charging, there are problems with the power controller, even after replacing the u2 microcircuit.

Repairs

Everything can be repaired, another question is whether it will be profitable as a result. Sometimes it is easier to throw away some of the microcircuits and replace them with new ones than to try to repair a dead patient. In this section, we will try to fix the iphone 5 with our own hands, which does not show signs of life, after replacing the screen.