iPad does not turn on the apple is on and goes out

Table of Contents

Causes of the problem

Before proceeding with self-repair, you need to understand the reason why the tablet does not start. Among the most common reasons:

  • Discharging the battery to zero. In such a case, the iPad boots up to the apple and then turns off.
  • Operating system problems. If the screen lights up, but the tablet does not work, try returning it to a working state by a forced reboot or flashing.
  • Hardware problems caused by mechanical stress, moisture or other negative factors.

What to do if iPad does not turn on after mechanical impact, or the screen goes blank after turning on? It is recommended to contact a service center. Hardware problems can be very different:

  • Defective power button. Find the breakage easily. Connect the charger to the device. if the indicator lights up, then the power button is faulty.
  • Short circuit with damaged components. It will not be possible to identify the damaged area on your own.
  • Liquid penetration into the housing.

Self-repair will result in the iPad being void of warranty, if any. In addition, you can damage other components by adding new problems to the existing ones.

iPad won’t turn on beyond the apple logo

If iPad does not turn on, apple is on, then serious hardware problems may be the reason. However, sometimes the problem occurs due to software errors and other failures that can be fixed without contacting a service center.

Eliminate software errors

If the tablet does not boot due to hardware problems, then there is a high probability that the user will immediately understand this. The device will be completely inoperative, so even before loading an apple it will not come. If your iPad does not turn on, but only an apple is on, then try to fix the problem yourself. What to do:

  • Force restart the tablet.
  • Update or Reflash iPad via iTunes.

To force restart the device, press the Power and Home buttons. Keep them squeezed for 8-10 seconds until the tablet turns off completely. Then release the keys and wait for the system to boot. This method helps, even if the system is frozen tightly, or when turned on, the apple is on and the screen goes out.

What if, after a forced restart, the system stalled again during the boot phase? Try to update the system via iTunes while saving the data:

  • Connect iPad to Computer with iTunes.
  • Force restart by holding the keys until a recovery window appears in iTunes.
  • Select the “Update” option.

The program will independently download the latest version of iOS and install it on the tablet without touching the user’s personal data. If, for some reason, the update process takes more than 15 minutes, the tablet will exit recovery mode. In this case, repeat the procedure.

See also the earlier post on how to turn on your iPad if it doesn’t respond to normal boot. Right here.

IPad firmware

If after the update the problem is not resolved, the option remains with a flashing through iTunes. This operation will erase the user’s personal data from the iPad, so make sure you have a backup to iTunes or iCloud.

  • Download the file with the latest iOS version for your model.
  • Connect your tablet to iTunes.
  • Open the device sync page.
  • Hold down the Shift key on your keyboard and click “Restore”.
  • Specify the path to the firmware file and confirm the restore request.

iTunes will delete the content that was stored on the tablet and download the new firmware to the internal memory. The settings will be reset to the factory state, so that all software problems will no longer interfere with the normal operation of the device.

If you can’t restore iPad in normal mode, you can try the same steps in DFU mode. To convert your tablet to DFU:

  • Connect iPad to iTunes.
  • Turn off your tablet.
  • Hold Power, after 3 seconds hold Home.
  • After 10 seconds, release Power while continuing to hold Home.

You need to keep Home until iTunes reports that the device is in recovery mode. Then you can start flashing iPad.

Other publications that will help you reflash iPad:

Reboot the device

Another way to restore any Apple smartphones, when the iPad does not turn on, the “apple” is on and off “, is to reboot the device. This is done in three steps:

  • press the Home and Sleep keys at the same time
  • hold them for 10-15 minutes until the “apple” logo appears on the display
  • wait for the tablet to reboot

This reboot method restores almost all Apple gadgets in case of any software failure. This method is often used after installing a tweak from Cydia or a jailbreak, after which the iPad freezes quite often.

iPad won’t turn on, apple is on and off

If you are faced with a situation where your favorite iPad does not turn on, the “apple” is on and off, do not rush to carry the device to the service center. There are several ways in which it is possible to restore the tablet to work at home.

Flashing the gadget via iTunes

This is a rather aggressive way of dealing with software bugs, but if the iPad “hangs on the apple” and stubbornly does not turn on, then flashing is the last thing you can try at home. The method is bad in that you run the risk of erasing all or part of the data on your device after updating the iPad. This will happen if you have not backed up iPad to iTunes in the recent past.

Re-flashing in situations where the iPads freeze when turned on is performed in several stages:

  • install the latest version of iTunes on your computer
  • connect to the PC iPad, which turns off or constantly reboots on the “apple”
  • select the appropriate device type in the program settings and wait for the program to download the latest software version for it
  • simultaneously press and hold the power and Home buttons on the iPad. an “apple” will appear on the iPad screen, which will go out
  • follow the instructions in the iTunes dialog that opens on the PC screen

The program will prompt you to set up an iPad that is frozen and does not turn on as brand new (with a return to factory settings and a complete loss of all data) or restore the last backup.

Charging check

The very first thing to do, if the iPad does not turn on, the “apple” lights up, then goes out, is to check the state of charge of the device. It is possible that you missed the signal on the iPad screen that its battery is in a low state. At the same time, the charging icon itself may not blink. the iPad will react to a full discharge with a completely black display, on which the apple logo will appear for only a second. Even if the tablet “hangs on an apple”, the cause of the malfunction may be the same.

  • connect an iPad, which has an “apple” on and then turns off, to a “native” charger (chargers from phones, iPad mini and other Apple gadgets are not suitable)
  • wait at least 20 minutes
  • start iPad again

The use of the “native” charger is extremely important. Analog chargers are capable of overheating the iPad while it is connected to the network, which leads to various problems in its operation. Incorrectly used iPads freeze when turned on and stop charging at all. IPhone and iPod freeze in the same way.

If after charging your iPad still does not turn on, also check that the charging cable and outlet are working properly. connect some other phone or smartphone to them and make sure that they are charging. If gadgets work with this cable and outlet, please go to other iPad recovery methods.

Repair for mechanical damage

All the methods described are suitable for home DIY repair of an iPad that is frozen and will not turn on, provided that the damage to the device was not mechanical. If your tablet has turned off and no longer boots after it fell, then the reason for the constant reboot of the device may be an interrupted cable.

Additional signs of this are the following interference:

  • when turned on, the screen lights up and flashes
  • there are streaks and other imperfections in the image before it fades
  • the appearing “apple” has a fuzzy white color

If your iPad goes out due to mechanical damage, do not repair the device yourself. Try restarting your tablet or charging it as described above, then flashing the device. If none of the methods helped, and the iPad restarts and goes dead, take it to the service center.

The most profitable option is to entrust the repair of a non-bootable iPad to the Yud executors. They will restore the tablet, which does not turn on and does not charge, as quickly as possible right at your home:

  • solder the dangling cable
  • will replace the broken glass of the screen
  • carry out professional software installation

iPhone won’t turn on: apple is on and off

ipad, does, turn, apple, goes

Salon consultants make a helpless gesture: iPhones, which do not turn on after the “apple burns”, are regularly brought under warranty. Buyers do not even know that they can solve this problem on their own. and it will take a minimum of time to fix the problem.

The notion that Apple technology is the most reliable is outdated; now iPhones are regular “guests” of service centers. One of the most common iPhone malfunctions is popularly called the “white apple”: the gadget starts up, the “apple” burns on the screen for a long time, then the screen just goes out.

Users, not knowing what to do in such a situation, immediately carry their gadgets to service centers, although they can also fix the malfunction with their own hands. without material expenditures or a 45-day wait for warranty repairs. How to get rid of the “white apple”?

How to get rid of the “white apple” if the iPhone is not jailbreakable?

If the “white apple” appears on an unjacked iPhone, the first thing the owner of the device needs to do is to reboot the smartphone and after 5 minutes try to call it. What will such a test give? It is very simple: if the call is in progress, it means that the download of the gadget is interrupted at the very last stage. therefore, it is possible to access the file system of the mobile device. And if there is access to the file system, then there is an opportunity to demolish the “buggy” applications that provoked the problem of the “white apple“.

READ  How to reset ipad to factory settings

You won’t be able to make changes to the iPhone’s file system through iTunes. You will have to use one of the alternative file managers. for example, iFunBox or iTools.

Connect the gadget to a PC and, through the file manager, erase recently downloaded applications one by one (by analogy with tweaks), alternating uninstall operations with checks.

Let’s return to the test with a call: what to do if the result of the experiment is negative and the call on the iPhone with the “white apple” does not go? Such a test result indicates a hardware problem: only technical docks, masters of a soldering iron and a multimeter can fix it with their own hands. If you cannot call yourself a “guru” of mobile technology, you should not open the iPhone and go into the filling. you will only make it worse. Better hand over the broken “apple” gadget to the caring hands of the service center masters.

IPhone Freezes When Turning On: Possible Causes

Ordinary iPhone users are often victims of wars between hacker teams. the very ones that develop jailbreaks. For example, the desire of the Evad3rs group to overtake the rest of the teams and release the iOS 7 jailbreak first led to the fact that the problem of freezing Apple gadgets on the logo in 2013 became an epidemic. Due to the “dampness” of the Evasi0n 7 jailbreak utility, smartphones got into a cyclic reboot. they switched on and off sequentially until the charge ran out.

Unsuccessful jailbreak and installation of a “buggy” tweak are two reasons that in the vast majority of cases cause a “white apple”!

However, if the iPhone turns on before the “apple” and turns off, this may be caused not only by a stupid attempt to “jailbreak” the device, but also a malfunction of the gadget at the hardware level. Here are some of the hardware problems that can trigger the appearance of the “white apple”:

    Breakdown of the power circuit. Such a breakdown is a consequence of a sharp voltage surge. In order to protect the gadget from power circuit malfunction, you should not put it on charge during a thunderstorm. Battery failure. You can extend the life of the battery if you use only original and high-quality chargers. Owners of old mobile devices are advised not to let the battery drain completely. Faulty motherboard. Such a breakdown does not immediately make itself felt. If with each launch of the iPhone the apple burns on the screen longer and longer, the user should take this as a symptom and start saving money for repairs.

The problem of the “white apple”, finally, may be due to the fact that the gadget is simply frozen. The Apple website has the following scale:

From this illustration, it is easy to understand that the manufacturer does not guarantee stable operation of the iPhone at temperatures below 32 ° Fahrenheit (which corresponds to 0 ° Celsius). If the smartphone is at a temperature of 4 ° Fahrenheit (-20 ° Celsius) for a long time, expect trouble.

The easiest way to get rid of the “white apple” caused by low ambient temperatures is to place the iPhone in a dry, warm place and leave it alone for at least 20 minutes.

What to do if iPhone won’t turn on after jailbreak?

Turn off your smartphone.

Hold the volume up button on the side of your iPhone.

With the key pressed, try to start the mobile device.

An iPhone turned on in this way boots without programs from Cydia. If the gadget turns on normally with the volume key pressed, the point is definitely in one of the tweaks.

It will not be possible to establish exactly which jailbreak tweak is problematic. erase the programs one by one (starting with the one that you downloaded last) and after each operation try to start the smartphone in the usual way.

Re-flashing. it just sounds scary, in fact, the procedure is quite simple:

Launch iTunes and connect the iPhone to PC with a cable.

Put your smartphone in DFU mode. If this is not done, the PC simply will not see the connected gadget. You can find detailed instructions on how to activate DFU-mode on iPhone in our article on DFU-Mode.

ITunes will notify you that iPhone has been detected in recovery mode.

Click on the “Restore iPhone” button.

iTunes itself will download and install the new firmware on the gadget. You just have to wait for the completion of the procedure.

Re-flashing in the described way is fraught with the loss of all data. the user will receive a completely “clean” device.

If the problem of the “white apple” appeared after a failed jailbreak, you should not hang your nose. In this case, you can fix the problem with your own hands. by flashing your smartphone and removing previously downloaded tweaks from Cydia.

But if the “apple” “hangs” on the iPhone, which did not go through the jailbreak procedure, for the owner of the gadget it is a wake-up call. It is very likely that the iPhone refuses to turn on due to a hardware failure, to fix which you will have to contact the service.

How to turn on iPhone without jailbreak?

What if you haven’t jailbroken but iPhone still turns on and off? When the apple device has not been tampered with, try doing this test. Restart your mobile device and try to call it after 5 minutes. If a call is in progress, the download stops at the last stage. This is a good sign. you will be able to access the FS! So, remove any buggy applications without any problems.

Please note that in this state of the phone, iTunes does not provide the ability to change the file system. We recommend using alternative options. iTools or iFunBox programs. All you have to do is connect to your PC and uninstall applications one by one, similar to jailbreak tweaks.

If the ring test is negative (no call), there is a hardware problem. Alas, it will hardly be possible to solve it without technical knowledge, a soldering iron and a multimeter. It is better not to go into the filling of the iPhone, but to give the gadget to the caring hands of professionals.

iPhone won’t turn on: apple is on and off

Burn, burn clearly, so as not to go out! In our case, the opposite is true. When you turn on the Apple smartphone, a white apple lights up on a black background. But after a few seconds it goes out, and we see a dark screen again. What is happening, why the iPhone won’t turn on? Let’s try to make the correct diagnosis and “cure” our apple friend.

Alas, even such reliable technology as the iPhone is not immune from breakdowns and software failures. One of the most common problems is loading, which is popularly called the “white apple”. Its essence boils down to the fact that the iPhone does not turn on. an apple burns on the display for several seconds and goes out or lights up again. Most users immediately take their gadgets to the service center. However, in some cases, the malfunction can be eliminated independently. without a long wait for repairs and material investments. We tell you how to fix problems with a burning apple.

Jailbreak, iPhone won’t turn on. What to do?

  • You need to turn off the smartphone and hold down the volume up button, which is located on the side panel.
  • Without releasing the volume key, turn on the mobile device. The download will start without apps from Cydia.
  • If the iPhone turns on and boots normally, the problem is definitely in some tweak.

It will not work to identify the problematic jailbreak tweak. you have to act at random. Erase the apps one at a time until the smartphone starts up in the usual way.

How to reflash a problem iPhone yourself?

It is only at first glance that a flashing seems like a terrible and impossible task. Even a beginner can handle it. Follow the steps below:

  • Launch iTunes on your computer and connect your mobile device with a cord.
  • Next, you need to put your smartphone into DFU mode. If you skip this step, the computer will not see your gadget.
  • iTunes will display a notification of the following character: “iPhone detected in recovery mode.” Click OK and agree.
  • Select “Restore iPhone” and wait for the process to complete.

The iTunes app will download and install the new firmware. All you have to do is wait for the procedure to be completed.

Drawing conclusions

The appearance of the “white apple” and the iPhone freezing when turned on is not a reason to run to the master. In some cases, the problem can be solved independently by reflashing the Apple smartphone and removing the buggy application. It’s bad if you haven’t jailbroken your iPhone, and the apple still burns. This is an alarm bell associated with a hardware failure of the device. To fix it, you will have to contact the service center.

How to troubleshoot

There are the following ways to fix the problem when iPad won’t turn on, apple is on:

  • Follow Apple Support Best Practices.
  • Entering the device into DFU mode.

It’s better to use the first method for a start. If there is no result, it is worth resorting to the second. It should be added that there are two options for entering iPad into special mode. at the end of the article we will consider how to do this.

Second option

If the first method did not work. the iPad still does not load, the apple is on, you can try the second method. This method is considered more literate, but it is a little more difficult for new users of Apple devices:

  • We connect the device to the PC and launch iTunes.
  • Turn off the device and wait until the shutdown process is completed correctly.
  • We press on the “Power” button, and after three seconds. “Home”. Hold the keys at the same time.
  • After 10 seconds, release the power button, but continue to hold “Home”.

At the end of the procedure for entering the special mode, a message will appear in the iTunes application that the program has found your device in a recovery state. However, you will need to restore your iPad before using it with iTunes at the same time.

The same procedure can be performed in the case when the iPad 2 does not turn on, the apple is on.

Switching to DFU mode

It is worth noting that this is a more extreme way out of the situation when the apple is on, but the iPad does not turn on. There are two methods for entering a gadget into a special mode.

If the apple logo is lit on the display and the iPad won’t turn on

Almost every owner of the popular “apple” tablet at least a couple of times had to deal with failures during the operation of the device. It happens that the iPad does not turn on, the apple on the display is on. The problem is not that rare, so Apple Support has prepared a few recommendations in case of such complaints from iPad owners.

Apple Support Best Practices

If during startup for a long period of time the iPad does not load, the apple is on, you need to do the following:

  • Connect the gadget to the PC and open iTunes.
  • Perform a forced restart (press and hold the Sleep / Wake and Home keys at the same time).
  • Under no circumstances release the keys after the company logo reappears on the display. the key combination must be held until the recovery mode screen appears.
  • On the screen that appears prompting you to restore or start the update process, select the “Update” function. The app must reinstall iOS while saving data.

The Apple app must download the software for the device. If for some reason the procedure takes more than 15 minutes, the tablet will exit the recovery process, then you will need to repeat all the steps again.

The above tips will also come in handy for owners of “apple” devices, for which the iPad 2 does not turn on, an apple is burning on the screen.

READ  TV does not connect to the internet via cable

Causes of the problem

Among the reasons for such failures are:

  • interruptions during an iOS update;
  • incorrect installation of programs;
  • moisture penetration into the device;
  • processor malfunction.

First option

The easiest way to enter a device into DFU is to simultaneously hold down the Home key and the power button for 10 seconds. Then you need to release the power key and continue to hold the “Home” button.

The apple lights up and the iPhone turns off. what to do

The apple lights up on the iPhone, after which the smartphone turns off. the wording of one of the most common iPhone problems. It can appear really suddenly. Many users who have encountered a problem say on our forum that their smartphones turned into “brick” after making a call, removing some applications from the device or other very standard actions. Whatever reason brings your iPhone to a similar state, this guide will help you solve the problem.

The apple lights up and the iPhone turns off. what to do

Connect iPhone to computer with USB cable and launch iTunes. Make sure iTunes is up to date. You can check for iTunes updates on Windows by going to Help → Updates, on a Mac, from the Updates tab in the Mac App Store. You can download the current version of iTunes on the official Apple website.

Press and hold the Home and Power buttons on iPhone at the same time for 10 seconds.

Then release the Power button and continue holding the Home button until iTunes detects the device in recovery mode (about 10 seconds).

In iTunes, click “Restore iPhone” and confirm to start the restore. Important! All media and other device data will be erased. The iPhone will also have the latest iOS version for your device.

In the window that opens, click “Next” and “Agree”.

Note that initially iTunes will download the version of iOS required for the device from Apple servers, and only after that the recovery will begin. You can track the progress of the firmware download by clicking on the button in the upper right corner of iTunes.

It should also be emphasized that after connecting the iPhone to iTunes in DFU mode, nothing will be displayed on the smartphone screen. And only when iTunes downloads the firmware and starts direct recovery, the progress bar will appear on the iPhone display.

After successfully restoring the iPhone, all that remains is to make the initial setup and start using the device.

What to do if iTunes does not detect iPhone in DFU mode

There are several reasons why iTunes may not detect the iPhone in DFU mode, ranging from the old version of iTunes to a technical malfunction. Before going to a service center or starting repairs on your own, it is recommended to check the integrity of the USB cable and USB port. Ideally, you can try to connect iPhone to iTunes on another computer using a work cable.

Also, the problem might be an iTunes error. In this case, iTunes must be reinstalled, but do it correctly by removing the program components in the following order:

  • iTunes.
  • Apple Software Update.
  • Apple Mobile Device Support.
  • Bonjour.
  • Apple Application Support (32-bit).
  • Apple Application Support (64-bit).

An extensive guide on how to properly reinstall iTunes is available here.

If nothing helps to determine the iPhone in iTunes in DFU mode, then there is a high probability of a technical problem. In most cases, the battery is the culprit, and after replacing it, the iPhone starts to function normally again. For detailed instructions on how to change the battery yourself on various iPhone models, visit our website:

But be warned, there may be a problem with other iPhone components, so the best way out of this situation is to go to a service center.

Reset iOS settings

If the iPhone does not turn on periodically (out of 5 times, no more than 2-3 freezes on the Apple logo), then before contacting the service center and experimenting with the DFU mode, it will not hurt to roll back the operating system parameters to the “factory” state. The procedure will not take even 10 minutes, and even a backup copy will not be needed: the content stored in memory will not disappear anywhere.

Reset starts from “Settings”, menu “General”. The desired section is at the bottom of the list, right above the “Turn off” button.

After the transition from the actions that appear, it remains to select “Reset all settings”, enter the PIN code (verification via Touch ID or Face ID is not available) and wait until iOS clears the parameters and restarts the iPhone.

Often, a reset is already enough to get rid of freezes and technical problems when an apple blinks or the iPhone screen starts to blank out unexpectedly. But even more often, you can’t even look into the “Settings”. iOS doesn’t even load. Therefore, it’s time to move on to universal methods.

Reasons why the Apple logo is lit and the iPhone won’t turn on

  • System crash caused by software problems or recent updates to the iOS operating system. In some situations, the problem also appears when interacting with unsupported characters. we are talking about hieroglyphs sent via iMessage, which on some versions of iOS lead to an emergency shutdown of the iPhone.
  • Battery discharged or defective.
  • The power adapter and charging cable are damaged and are not able to charge the iPhone even up to 5%, which is why the apple logo does not disappear.
  • Mechanical damage: iPhone dropped and constantly reboots, remained under water for a long time, or lay for several hours in the sun or in the cold.

IOS Restore or Update via iTunes

ITunes. Apple’s media combine. is often viewed with distrust due to its button-cluttered interface and confusing navigation. In fact, the tool: it will help you filter both the entertainment media library, and will help with the recovery of a locked or non-working iPhone.

The only thing you have to deal with is downloading and installing the latest version of iTunes, and connecting your iPhone to your PC using a USB cable. Next. go to the parameters of mobile technology, presented in the “Overview” section.

It is advisable to prepare an up-to-date backup copy of the contents of the internal memory at the bottom of the interface before starting the procedure. Formally, no data can disappear when the iPhone is restored to work. But extra safety net won’t hurt. Backups are generated and stored: either on the hard drives of the computer, or in the iCloud cloud storage in the iOS settings.

Regardless of the choice, you will have to return to the top of the interface and click on the “Restore iPhone” button. iTunes will automatically download the update files and transfer the latest iOS version to mobile devices in the background. The procedure takes on average up to 30 minutes (this is due to the preparation and preliminary unpacking of files before updating or restoring). After several reboots, the problem with the “iPhone does not turn on, the apple is on and off” will disappear.

IPhone does not turn on (apple burns and goes out): from reasons to reset

Hello everyone! Today I ran into a problem. the iPhone does not turn on, the apple is on, and the smartphone itself just goes out. at first it seems to turn on, then it turns off and it goes out. And so constantly when you turn it on.

Apple mobile technology rarely encounters unsolvable technical problems and errors. But the problem with the iPhone not turning on or hanging on the apple logo has already become overgrown with legends and has become a widespread phenomenon. And that means it’s time to figure out the details and find out why the iPhone does not turn on, the apple burns and goes out, and how to save mobile equipment using iTunes.

IPhone Recovery via Third Party Software

Unofficial software tools handle iOS problems like iTunes. And sometimes they offer even more: an intuitive interface, a predictable course of actions and recommendations for beginners.

The same diagnostic service ReiBoot, adapted for computers with Windows and MacOS, offers in a matter of moments:

  • Run DFU mode without holding the buttons on the iPhone case, but through a special menu in the interface.
  • Return to standard mode or go to a special section with “Support”. where tips appear for situations when an apple is on or mobile equipment does not respond to pressing.

It is easy to interact with ReiBoot: the developers first suggest connecting the iPhone to the computer using a cable, and then, in the interface that opens, select the “Enter recovery mode” item.

How you have to proceed depends on the reason for the appearance of the non-disappearing logo and the version of the iPhone (4, 5S, 6, 6S, 7 or newer). But with a 99% probability, ReiBoot will first download the stable version of iOS from the official Apple servers (either new, or the current one, but “reset” to factory settings).

Then it will automatically start the update process. The procedure takes from 15 to 30 minutes, depending on the speed of the Internet, the amount of space occupied on the internal memory of the iPhone and the number of errors found in iOS.

IPad Repair Cost

Important! The price of repair already includes the cost of spare parts and the cost of work.

Apple does not turn on and burns on iPad 4, 3, 2, 1

Often, iPad 4 owners can face a problem when the tablet is frozen on an apple. What to do in such a situation, and why this malfunction occurs?

  • We’ve been fixing Apple for 5 years. thousands of satisfied customers
  • Repair with you. We manage to do 72% of repairs in 35 minutes
  • Free diagnostics
  • Original spare parts
  • Guarantee for all works

iPad won’t turn on, apple is on and off

  • oneFree diagnostics brought-
    device you or our courier.
  • 2We make repairs and also give a guarantee for newly installed parts. On average, repairs take 20-30 minutes.
  • 3Get a working device yourself or call our courier.

Craftsmen who constantly encounter a malfunction when an apple burns, but the iPad does not turn on, distinguish three main reasons for the breakdown:

  • software crashes;
  • damaged firmware;
  • hardware failures caused by moisture, drops, or impacts;

Many users claim that their iPad 1 can work without reboots for a month or two. Of course, during this period, the device receives a colossal amount of data that needs to be “digested”.

As a result, during a forced reboot, a nuisance often occurs in which an apple burns. In this case, you can restore performance in several ways:

My iPad Won’t Turn On! Here’s The Real Fix.

  • forced reboot;
  • recovery via iTunes;
  • flashing device.

The first method in many cases allows you to return the device to normal mode. But sometimes a forced reboot only makes the problem worse.

iPad stuck on apple and won’t turn on. What to do?

If after restarting the device hangs as before, or does not turn on at all, then try connecting it to the computer and restoring the system through iTunes. When this does not help, you should change the firmware. You can do this yourself, but it is better to entrust this laborious and responsible process to the masters of our Apple technology service center. Here, only verified and licensed software will be installed on the tablet.

But there are situations when the flashing does not bring a positive effect, but the malfunction remains further, the iPad does not turn on, the apple burns and goes out. This testifies to only one thing. there was a hardware failure and damage to key components of the device. You could inadvertently hit the tablet on an object, or the gadget could fall. All this often leads to damage to cables, microcircuits and even the motherboard.

How to fix an iPad 3 tablet in this situation? Most often, if the iPad 2 hangs on an apple, it indicates a failure of flash microcircuits or a processor. It is unlikely that it will be possible to restore these components on their own after damage, so it is necessary to completely replace them. This is a rather complex process that only a qualified employee with the necessary set of tools can perform.

But the biggest danger to the electronics of the device lies in moisture. The ingress of water leads to oxidation and corrosion of the contacts and microcircuits of the device. In addition, attempts to start the tablet after getting wet can end up with serious consequences for the device, because moisture, as an excellent conductor, leads to such a phenomenon as a “short circuit”. In this situation, the user will not fix anything on his own, you need to immediately contact our Apple repair shop.

READ  What's the Difference Between an iPad and a Tablet

IPad won’t turn on. What to do?

The secret of the high popularity of Apple technology is guaranteed reliability and high quality of products: in the mobile device market, a combination of two factors bypasses competitors without a direct collision, but is the end user so protected? And is there any salvation from malfunctions at home?

The iPad went out in the most interesting place, does not respond to clicks, requests and outright threats? Stopped functioning due to flashed firmware and system errors? There are enough reasons for the death of the tablet. it’s time for an emergency recovery!

Broken charging connector

Do not overdo it when you want to help an electronic friend.!

Excessive mechanical stress on the tablet destroys both the keys and the power ports. damaged or deformed pin-connectors are not restored, but change along with the connector. The situation becomes more complicated if the tablet falls. several cracked parts will have to be replaced at the service center and, of course, not for free.

Why can’t my computer see my HDMI TV? The answer is here.

  • blow off the dust;
  • clean the connector with the supplied paper clip;
  • try charging again;
  • carry out the procedure for non-standard cleaning of the power socket constantly, for prevention.

Doesn’t turn on after jailbreak

Jailbreak is an operation officially unsupported by Apple representatives that issues superuser rights and opens access to the file system.

Have you empowered your device but your strategic improvement plan has failed? There is a white apple and a disconnected wire symbol on the screen, but plugging into an outlet and iTunes does not help?

Use two methods:

  • hard restart iPad. simultaneously hold down the Home and Power buttons for ten seconds. After discharging, when the screen turns off completely, the device will turn on automatically;
  • restore the tablet to work by reinstalling the operating system using iTunes, after turning off and connecting the iPad to the PC.

iTunes. navigator and organizer of Apple mobile devices, media player and guide to the world of music and movies.

The process of restoring the tablet takes several minutes, the main thing is to act according to the algorithm:

  • download the latest version of iTunes from the official Apple website, install and run the utility. Next, connect your iPad to your computer using the original USB cable;
  • put the device into recovery mode by holding down the Home and Power buttons. When the screen turns off, release Power, leaving your finger on “Home”. the rescue inscription “Restore” will help determine the success of the operation;
  • downloading the update, unpacking and installing is automatic, the progress of the recovery is shown by a thin white bar;
  • the procedure will help out even in emergency cases, however, it will leave without the stored data.

Moisture ingress

An unexpected meeting of a liquid with a tablet is a problem that can be largely solved only in service centers with the help of technical specialists. You can only partially restore the device on your own by unscrewing the gears and drying the boards hidden behind the protective cover.

The operation is risky. the sharp oxidation process is irreversible, and also leads to complications and expensive repairs:

The situation is controversial. in some cases it is better to immediately contact Support, sometimes light drying of the device helps.

  • unscrew the screws-bolts, remove the back cover and the battery and inspect the “filling” for defects;
  • methodically remove moisture from boards, floors, contacts and loops;
  • dry all parts separately, either with a compressor with compressed air, or! risk! a hairdryer, controlling the temperature;
  • put all the parts back together by connecting all the parts and tightening the bolts tightly.

Short circuits

The design of Apple devices does not provide for the use of non-original accessories. fake chargers violate the integrity of the electrical circuit and cause a violent reaction, up to the internal combustion of individual components.

A stingy or incredibly cunning user always pays twice. Do not try to cheat the system and save money when buying a charger, the risk is not justified!

Remember a simple truth. the key to long-term use of a mobile device: correct operation!

Defective power button

To recognize the mechanical wear of the Home key, you can use a simple trick. connect the tablet to the charger. If the usual energy recovery indicators instantly light up on the screen, it means that the problem is related to a hardware malfunction and the button that does not work can only be repaired.

Problems with firmware

Installing the Beta version of the new operating system finished with honors, but the tablet turned off and does not respond to commands? Does the screen mesmerize with a perfectly black color and doesn’t allow you to return to work? Use the Hard Reset function by holding down the Home and Power keys, or completely restore the tablet by reinstalling the operating system.

Users with Jailbreak installed may face the problem of incompatibility of tweaks and utilities downloaded using Cydia.

There is a way to restore iPad without tweaks:

  • turn off the device;
  • feel the volume lever “” and hold down the button;

If the device has booted, then try to clear the OS of problematic tweaks and return the device to normal operation.

What to do if iPhone 6 turns on and off?

The “apple” is constantly lit on the phone screen

  • make sure the battery is charged and not discharged anytime soon
  • prepare your computer and USB cable
  • sync iPhone to PC
  • turn off your iPhone while holding down the Home button and the Power button.
  • hold down the power button and wait for the iTunes application logo to appear on the screen.

How to turn off iPhone auto turn on when charging?

To disable this feature, go to Settings Battery Battery Status Optimized Charging. When Optimized Charging is on, a notification on the lock screen will tell you when iPhone is fully charged.

Why does iPhone restart on apple?

Why iPhone freezes and restarts on apple

The most common problem is a crash during the iOS update process. If your device is jailbroken, the issue may be related to the jailbreak itself, a tweak, or an app installed from Cydia. Incorrectly working iOS beta.

What to do if iPhone turns on, shows apple and turns off?

Press and hold the Home and Power buttons on iPhone at the same time for 10 seconds. Then release the Power button and continue holding the Home button until iTunes detects the device in recovery mode (about 10 seconds).

What to do if only an apple is lit on iPad?

Another way to restore any Apple smartphones, when the iPad does not turn on, the “apple” is on and off “, is to reboot the device. This is done in three steps: press the Home and Sleep keys (shutdown) at the same time and hold them for 10-15 minutes until the “apple” logo appears on the display

What to do if iPhone flashes apple?

launch iTunes on your PC connect your device (the Apple logo should appear on the screen) turn off the device by pressing the Home and Power buttons at the same time. release the power button after the screen turns off (the icon should not light up)

What to do if iPhone 7 is frozen on an apple?

To restart iPhone 7 and iPhone 7 Plus, press and hold the Volume Down buttons and the Power key for about 10 seconds. If the model is older, then to restart you need to hold down the power key and the Home button for 10 seconds until the apple icon disappears.

What to do if iPad won’t turn on

Greetings, dear users and undoubtedly happy owners of an iPad. a tablet computer from Apple based on the iOS operating system (at the time of this writing, the latest version is the eighth). If you are the happy owner of any gadget from Apple, for example iPad (2,3, Mini, Air), then most likely you are already accustomed to its stable and reliable operation, and for you the fact that the gadget does not turn on leads to dead end.

Those people who have never used tablet computers other than iPad (2,3, Mini, Air), probably, do not know that during the operation of the device any difficulties or problems may arise, for example, the device does not turn on.

In today’s article, we will analyze the situation when the iPad (2,3, Mini, Air) does not turn on. Those. the device does not react when the “turn on” button is pressed, and even an apple on a glass, black screen does not light up.

Faced such a situation? Do not rush to panic and look for a screwdriver to disassemble your iPad (2,3, Mini, Air), in general, I strongly advise you not to disassemble the tablet computer yourself if you have problems, you cannot fix the situation, but you can even worse to do. over, if the iPad (2,3, Mini, Air) does not turn on, then this problem in ninety-nine percent of cases can be solved, literally, in five minutes. Below I will tell you what actions you need to take for this.

Method 3

If the previous method did not help and the device still does not turn on, then use a more radical method, namely, restoring the iOS operating system using iTunes. This is done very simply, follow the steps described below:

  • Connect your device (iPad tablet or iPhone smartphone) to a personal computer using a USB cable, this cable must be included with the Apple device;
  • ITunes must be installed on the computer to which you connect the device. If this program is not on your personal computer, then you need to install it. You can do this by following this link. http://www.Apple.com/iTunes/;
  • Launch iTunes, then press the CTRLS key combination and select your device in the appeared side menu. Go to the “Overview” tab, now on your Apple device, hold down the buttons: home and on / off. Do not release the buttons for about ten seconds;
  • Next, a window will appear in the program in which you will be prompted to restore the iOS operating system.

Attention: when restoring the operating system on your device, you act at your own peril and risk, the author of this material is not responsible for your actions.

Method 2

The next step that needs to be taken to reanimate your Apple device (in fact, in this way you can bring back to life not only the iPad (2,3, Mini, Air), but also the iPhone smartphone) is to press and hold two buttons at the same time: the button power on / off device and the Home button (the round button at the bottom of the inside of the Apple device). Press and hold these two buttons simultaneously for at least ten seconds. If after this time the apple does not burn, then go to the next way to make iPad work.

If the apple is on fire, then everything is in order (the gadget turns on), and your iPad or iPhone smartphone will start working after a certain amount of time (a few seconds).

Method 1

I, of course, assume that now there will be a lot of disgruntled exclamations, but believe me. the action described below is the first thing to take in a situation when your iPad (2,3, Mini, Air) cannot be turned on. Perhaps it just ran out of battery power. If you have not tried this method to “reanimate” your device, then do it right now. connect your tablet computer to a power outlet.

If this method did not help and the device does not turn on, go to heavier artillery.

Method 4

If none of the proposed methods helped you, then only one thing remains. take your device to a service center.

That’s all for today, I hope now your iPad (2,3, Mini, Air) or iPhone turns on without problems.