IPad does not respond to touch

Table of Contents

Contacting the service center

If the firmware did not help return the iPad Air or Mini to a working state, it still turns off and does not respond to touch, then take the tablet to the service center. Why is it not recommended to do it yourself? Troubles such as moisture, damage to components, breakage of the power button, etc. require qualified repair. It is almost impossible to make it at home.

Do not forget to read the Комментарии и мнения владельцев, there is also a lot of useful information. If there is no answer to your question, and there is an answer to later Комментарии и мнения владельцев, then the answer to your question is contained in the article, respect someone else’s time.

Disconnecting iPhone during a call: finding and fixing the cause

Causes of the problem

If iPad won’t turn on, first try to determine the likely cause of the problem. Problems can arise due to the following factors:

  • Software glitch.
  • Firmware errors resulting from incorrect update, recovery, jailbreak.
  • Breakage of the power button.
  • Failure of tablet components.
  • Moisture ingress.
  • Short circuit.

You don’t need to do anything about hardware problems on your own: it is highly likely that after an unqualified repair, the situation will only get worse. But you can try to cope with software errors on your own.

iPhone turns on and off immediately: how to restore a smartphone

iPad Won’t Turn On: Diagnostics and Troubleshooting

If the iPad won’t turn on, the problem could be due to both software glitches and hardware malfunctions. With the first, the user can cope independently, but in case of breakdown of individual components of the tablet, it is recommended to immediately contact the service center.

Device firmware

If the iPad has turned off and does not respond to touch after jailbreak, update, installation of a previous version of iOS, or an apple hangs on the screen, then you need to restore the device. But before proceeding with this procedure, make sure that a backup copy of the data is stored on your computer or in iCloud: when flashing, all information from the iPad will be deleted.

First try to restore iPad Air or Mini in Recovery Mode:

  • Connect iPad to computer, launch iTunes.
  • Click “Restore iPad“.
  • Wait for iTunes to download and install the latest iOS.

If the tablet does not respond to actions and still turns off and does not turn on, then you need to do a recovery in DFU mode. To put the tablet in DFU mode, connect it to a computer with iTunes open, and then hold down the Power and Home keys for 10 seconds. After 10 seconds, release the Power button but hold Home until this message appears:

Recovery is performed according to the algorithm described above. You can also download the firmware yourself and select it by clicking “Restore” while holding down the Shift key.

ipad, does, respond, touch

What to do if iPad doesn’t respond to touch

After the iPad suffered from a shock, it was bathed, another mechanical impact is to carry the gadget for repair. The reasons and defects are evident. If after installing or updating the application, switching to a new version of iOS, you need to restart the tablet. For this, the standard turn-off and turn-on method will not work. After holding the power button, you will not be able to swipe off the shutdown icon. the ipad does not respond to the screen or it does not light up at all. Forced reboot will help.

  • Hold down the power and Home buttons at the same time;
  • Wait 10 seconds;
  • Lower buttons.

This algorithm does not work with bezelless tablets. Models like the 2018 iPad Pro do without a Home button.

Why iPad won’t respond to touch?

The reasons for the malfunction of the gadget are divided into two main categories:

  • Mechanical damage;
  • Software crashes;
  • Manufacturing defects.

Cracks or deep scratches in the glass will break the tracks. Moisture between the layers of the sensor, deformation of the screen, low temperatures affect the capacitive properties. All these factors lead to the fact that the sensor of the iPad does not respond to touch. Mechanical defects are usually localized in some part of the sensor. Deformation, scratches, cracks are easy to detect visually. Wet and frozen screens rarely show obvious external signs.

Mechanical damage is almost always irreversible and requires replacement of the sensor. The exception is trapped water or hypothermia. But even in these cases, professional repair is preferable. Sudden warming of the gadget leads to the formation of condensation. Simple drying causes patina formation in 100% of cases.

Conflicts of running programs, non-compliance of hardware with software requirements, logical errors in applications refer to software failures. Outwardly, this is expressed in the “inhibition” of scrolling or scaling the image, ignoring short touches. iPad does not respond to touch or turns off. Problems appear regardless of the touch point of the touchscreen.

You can restart your device, but even if restarting helps, in most cases this is a temporary solution. Full diagnostics are required for proper operation. You may need to rollback the OS or any application to a working state, flashing the gadget.

Defects of Apple products are extremely rare, the company protects its reputation. All devices are tested at the factory and undergo pre-sale training. Nevertheless, in the process of operation, there are failures associated with the violation of technology. The case with the iPad Pro 2018 is indicative. This model’s case was deformed during operation for no apparent reason.

The screen of the new ipad does not respond. the warranty device will be changed without problems. However, a visit to the SC cannot be avoided, since a conclusion is needed on the reasons for the failure of the device.

iPad does not respond to touch

Unique technology enables Apple touchscreens to handle multiple simultaneous touches. Coordinates and pressing force are determined with high precision. They combine the advantages of resistive, capacitive and wavelength sensors. Despite the high reliability, like all complex devices, these sensors can fail.

What to do if iPad pro does not respond to touch?

  • Briefly press the Volume up button;
  • Immediately press and release the Volume Down button;
  • Hold down the Power button until the company logo appears on the screen.

Restarting the tablet may not work at all or only have a temporary effect. In this case, contact a repair center that specializes in Apple products.

Hard reboot stages

Hard restarting the iPad will clear RAM and refresh all processes. This method will not do any harm to either the motherboard or microcircuits.

To completely restart your iPad, follow these steps:

  • unlock device
  • hold down the Power and Home button for 10 seconds
  • release the buttons at the same time after the logo appears

This shutdown is suitable for any model of Apple tablets.

If after restarting your device still does not unlock or the touch glass still does not work well, try updating the software.

  • turn on iTunes
  • connect tablet to laptop
  • select your device in iTunes
  • select the category “Review” and click on the tab “Update”

Apple products are designed to update software over the air. To do this, put the gadget on charge, connect to the Internet and in the main settings select the category “Software update”.

If after that the touchscreen does not work well, does not unlock, or the tablet does not turn on at all, then the motherboard, microcircuits are faulty, or the display module is damaged.

iPad does not respond to touch

If the iPad’s screen isn’t responding to touch, you don’t necessarily need to replace the touchscreen. The cause of the failure may be a device freeze or some applications not working correctly. To determine why the sensor is not working properly, perform the primary diagnostics of the gadget at home.

If, after examining the iPad, you find that the screen is damaged or there are scratches on the tablet case, then you should contact qualified specialists. Mechanical damage to Apple technology can lead to malfunction of internal components. In such cases, experienced craftsmen will be able to find out exactly why the screen does not respond.

Ways to restore a gadget

If the reason that the touchscreen does not work is an application freeze or a software malfunction, then you can restore the operation of the device yourself.

Effective and safe ways to do it yourself:

  • force close all active applications
  • hard reset device
  • cleaning screens
  • 3D touch setting
  • software recovery

Sometimes the iPad touchscreen does not work due to severe dirt on the display. Before rebooting the device or taking it to a service center, carefully clean the glass from dust and dirt.

Also, the reason why the tablet stopped responding to finger presses may be strong cooling or overheating of the device. To get the gadget to work, leave the tablet turned off at room temperature for 20 minutes.

The main reasons for sensor freezing

often than not, the touchscreen stops responding to finger touches due to system glitches. The most common reasons are:

  • presence of malicious files on iPad
  • software problems
  • Jailbreak is incorrectly installed
  • some applications do not work correctly
READ  HDMI does not connect from laptop to TV

Any of these reasons can lead to problems with the touchscreen of the device. If the iPad screen does not respond to touch due to hardware problems, then professional repair and replacement of defective parts is required.

Apple representatives recommend not downloading applications, programs and games from unverified sources to iPad, because this can lead to the system freezing and the screen responding poorly to finger presses.

Professional repair from Yudu performers

Only qualified specialists can accurately and efficiently eliminate hardware problems. Experienced craftsmen are registered on the YouDo website, who, taking into account the technical parameters of the model, will eliminate any malfunction of the screens. Yudu professionals will determine exactly why the gadget stopped responding to clicks, after which they will quickly repair the iPad touchscreen display in accordance with the manufacturer’s recommendations.

If the iPad screen does not respond to touch, contact the Yuda performers, they guarantee urgency and high quality of work.

Close background apps to decide if iPad touchscreen isn’t working

In most cases, a restart will fix the iPad touchscreen issue in some places and return it to normal. Sometimes you can also try to close all background apps to fix this problem. As we mentioned above, too many applications running at the same time can cause your iOS device to overheat. Overheating can cause the touchscreen to not respond properly to iPad.

Step 1 Unlock iPad and double click the Home button to show all apps running in the background.

Step 2 Swipe apps one at a time across the top of the screen to close them. Then press the Home button to return to the previous screen.

Restart iPad to Fix Touchscreen Not Working on iPad

When your iPad screen is unresponsive, partially unresponsive, or responds slowly, restarting will always be the first method you choose. Now you can follow below steps to restart iPad.

Step 1 Keep pressing the Sleep / Wake button until you see the screen turn off, Swipe the slider to the right to turn off iPad.

Step 2 After turning off iPad, wait a few seconds. Then keep pressing Sleep / Wake. while the Apple logo appears on the screen.

Professional Way to Fix iPad Touch Screen Not Working

If you have already tried many ways to fix a touchscreen not responding on iPad 2/3/4, iPad Pro / Air 2 / mini or iPhone, but the problem still exists, here we sincerely recommend the powerful iOS System Restore to help you fix the problem. easily. If iPad touchscreen issue is not working properly due to apps or system, you can rely on it to get the job done.

Step 1 Free download, install and run everything you need to restore your iOS system on your computer. If you are using a Windows PC or Mac, you must select the correct version. Then connect your iPad to it using a USB cable. Click on iOS System Restore when you enter the program preview window.

Step 2 Click the Launch button to scan your iOS device. It will automatically detect your iPad and show basic information in the interface like device category, device type, device model, iOS version and so on. click confirm to go to the next step.

Step 3 Click on the Repair button to start fixing iOS system problems on iPad. It has the ability to detect and fix touchscreen issues on iPad.

Step 4 After downloading the firmware, your iPad screen problem will go away.

This recommended iOS System Recovery can help you solve various iOS problems like iPad stuck on Apple logo, iPhone stuck in Recovery Mode or DFU Mode and more. You can download and try for free when you run into iOS issues.

Common Ways to Fix iPad Touchscreen Not Working

If you have a broken or damaged iPad screen that is not responding, you are prompted to replace the iPad screen. In other cases, you can use the following guide to get rid of this problem.

Set 3D Touch Sensitivity to Stop iPad Touchscreen

In some cases, adjusting the 3D touch sensitivity can also help you fix a touchscreen not working in some areas or responding slowly to an issue. Each iOS device is equipped with control chips from both the regular and secondary touchscreen. You can follow the following guide to adjust 3D sensor sensitivity on iPad.

Step 1 Turn on your iPad and go to the Settings app

Step 2 Click on General Touch 3D Accessibility.Now you can move the slider to select the appropriate sensitivity level. Or you can turn 3D Touch on / off to fix iPad screen problem.

Updating iOS version to iPad screen not working

The new iOS is mainly released to fix some bugs in the previous version. So when you come across a situation where the iPad touchscreen is not working in iOS 9, you can try updating the iOS version to fix the problem.

Step 1 Unlock your iPad and open the Settings app

How to fix ipad screen not touching

Step 2 Click General Software Update to see if there is an update available. Update your iPad to the latest iOS version, if available.

How to fix iPad touchscreen not working in iOS 10/11/12

Conclusion: Is your iPhone or iPad touchscreen stuck and unresponsive? In fact, many iPhone / iPad users have complained about touchscreen issues after upgrading to iOS 10 or iOS 11/12. This post will show you effective solutions to fix touchscreen problems on iPad 2/3/4, Pro / Air / mini and iPhone X / 8/7/6/5.

“IPad mini 2 has intermittent touchscreen response issues. I just updated it to iOS 11.4.1. Now the iPad’s touchscreen is often unresponsive to my touches, especially when I open certain apps like YouTube and Spotify. Sometimes I am not even allowed to close the lock screen and return to the home screen. Has anyone encountered such a situation before? How to fix iPad touchscreen not responding? “

During your daily use of your iOS device, you may encounter a situation where the iPhone or iPad’s touchscreen is not working.In fact, for many reasons, the touchscreen is not responding to problems. For example, the iPad screen or your fingers are wet, the touchscreen is damaged, system errors, and so on.

When your iPad touchscreen gets stuck and can’t respond properly to your touches, the first thing you should do is figure out why this iOS device isn’t working. Typically, the touchscreen does not work on iPad mainly due to digitizer or system issues.

To help you get rid of this problem quickly, this post shows 7 simple and effective ways to fix iPad touchscreen not working. You can try them one by one until the problem is solved.

Why the sensor / touchscreen on iРad (iPad) may not work. What to do?

As you can see, there may be several reasons why the sensor / touchscreen on the iPad (iPad) does not work, so we recommend not trying to repair the device yourself. If you do not have the necessary skills and experience, please contact our organization “Apple-SAPPHIRE”. Our specialists will be able to make an accurate “diagnosis” of the device and carry out competent repairs with less spending of your time.

IPad sensor / touchscreen not working

Select the device that needs repair:

Despite the fact that tablets from Apple are very high quality products, their users often face such a problem as a non-working sensor / touchscreen. It may fail completely or not work partially. One way or another, this will cause a lot of inconvenience to the owner.

What to do if the touchscreen / sensor does not work on the iPad:

If the sensor is constantly malfunctioning (the touchscreen works, but with malfunctions and errors), it is worth rebooting the tablet. This can be done as follows:

  • simultaneously hold down the buttons “Home” and “Power on”;
  • hold them in this state for about 20 seconds;
  • the device will reboot;
  • if the Apple logo appears on the tablet screen, everything was done correctly.


If a protective film or a cool bumper is glued to the display of the gadget, try to remove them and test the operation of the touchscreen. It is possible that the screen will start working again, and the reason for the breakdown was the use of such accessories.

If the owner has done all of the above, but the screen has not been “reanimated”, then perhaps you should think about a visit to the “Apple-SAPPHIRE” workshop. The service center specialists will not only be able to assess the condition of the tablet, but also find out the cause of the problem.

As for the display replacement period, it will take no more than an hour. over, fast execution will absolutely not affect the quality of work. And all because we have original parts and rich experience (we are contacted with a similar problem every day).

Sometimes the screen may stop working due to damage or deformation of the system board. Such a malfunction requires a complex and lengthy recovery. After all, the solution of serious problems, like the diagnosis itself, lasts much longer than the usual replacement of the sensor.

Please note that all tablet computers from the 4th to the 6th generation are equipped with a touch glass integrated into the display module. over, the module itself consists of 3 elements. a protective (top glass), a touchscreen and the display itself. Therefore, if the sensor stops responding to touch, you will have to change not only it, but the entire module.

What to do if part of the iPad (iPad) screen is not working?

With such a malfunction, both the display and the touch panel must be replaced, because they are made in the form of one module. Damage to the tablet screen under the same loads is different for different versions. The first generation models have a much thicker display, so it can withstand heavy loads.

Repair time and cost are largely determined by the specific model. As a result, replacement of one element in the first generations of tablets will be cheaper and faster than in the latter.

The specialists of the Apple-SAPPHIRE company will be able to quickly find out the reason for the breakdown of your device and, as soon as possible, will qualitatively eliminate the malfunction. The sooner after the first signs you contact our service center, the faster, cheaper and easier it will be to restore. Do not postpone repairs to the back box, as using a damaged or faulty iPad leads to additional problems and may even aggravate the progression of existing faults.

So, if part of the screen does not work for you or the display is completely out of order, then you need to contact us. Here we will perform comprehensive diagnostics for free. As a result, you will be able to determine the place, as well as the cause of the breakdown and establish the complexity of the damage. A representative of our company will inform you about the cost of the repair, and if it suits you, he will begin to eliminate the problems. Without special equipment, you will not be able to determine why part of the iPad (iPad) screen is not working. You yourself, relying on external signs, can only make assumptions.

Part of the iPad screen is not working

Select the device that needs repair:

Despite the fact that all products from the manufacturer “Apple” are considered one of the most reliable, malfunctions can occur with this technique. The most vulnerable point of the iPad is the screen.

READ  How to find out the SIM card number in iPad

The touch glass is capable of reacting to any mechanical damage. And if part of the iPad (iPad) screen does not work and does not respond to touch, then this may be due to several reasons. For example, it can be careless use or prolonged exposure to direct sunlight. Also, the touchscreen can malfunction if the tablet display is flooded with water, the effect of constant humidity, low or high temperatures.

It is impossible to replace the display of this model on your own, since this will require professional knowledge and high-tech equipment. Otherwise, you can do even more harm by damaging a specific ribbon or connector. Therefore, we recommend that you contact our service center “Apple-SAPPHIRE”, where you will be provided with qualified assistance at affordable prices.

Let’s highlight the main reasons leading to the inoperability of the display part of the iPad screen

  • The screen has been damaged due to a shock, drop, or liquid spill. Depending on the nature of the damage, either recovery or replacement of the screen awaits you.
  • Damage to the power control chip. Such a component is often damaged as a result of voltage surges during charging, with physical and mechanical stress. You can tell exactly about the reasons for its malfunction after professional testing.
  • Internal parts (printed circuit board or loop) are out of order due to moisture ingress. Liquid is a very dangerous factor. Usually, after such exposure, the tablet may immediately fail. However, it is possible that breakdowns will manifest themselves over time (for example, traces of oxidation or corrosion). Therefore, after such incidents, in order to avoid many problems, we advise you to quickly show the product to the masters.
  • Shocks, drops and pressure from solid objects can also adversely affect the ribbon cable, printed circuit board, and components. In this case, you need to perform an inspection, identifying where the failure occurred.

Such symptoms, when part of the screen does not work, can indicate a variety of malfunctions. Therefore, you need to turn to specialists for help immediately. Only qualified craftsmen, using special equipment, will find out which of the components has failed and which repair will be advisable.

We have created the most convenient and favorable service conditions for our clients. In most cases, the diagnosis and the repair process itself is performed right in front of the client. After repair, you receive a warranty for iPad, the validity period of which will pleasantly surprise you!

Reset and reboot

First of all, to exclude the option of freezing, you should restart the iPhone by turning off and turning on the smartphone. If the device does not respond to a short press, press and hold the power button for about 10 seconds. You can also remove the battery for a short time by removing the back panel of the device.

In case of repeated freezes, you will have to perform a complete reset of the phone settings using the iPhone menu. However, it should be borne in mind that previously installed applications and settings may disappear.

Previously, for the purity of the experiment, it is recommended to remove the SIM card, memory card and turn on the smartphone without them.

IPhone touchscreen not responding to touch

The most common reason that your gadget does not respond in any way to your touch is the freezing of the smartphone software. Freezes are often associated with a type of budget three-level TLC NAND Flash memory. Although the amount of memory stored in this memory is larger than in other types, its operation speed is not great and is prone to errors.

Dropping the iPhone onto hard surfaces may destroy the mechanical or soldered internal connections of the circuit elements. In this case, the smartphone may periodically reboot or freeze, which is expressed by the lack of response to touching the touchpad.

And finally, the second and, unfortunately, widely reported reason for the screen not responding is the destruction of the touch screen. It is not difficult to identify this by carefully examining (preferably with an increase) the surface of the screen for the presence of chips or cracks.

The first thing to do is to try to restore the screen response using software.

If it doesn’t help

The saddest and, unfortunately, the most common reason. Due to the fact that the surface of the iPhone screen occupies almost half of the area of ​​the device, it reacts not only to touching it, but is also subject to the influence of physical factors: scratches, pressure, impacts, etc.

Even if a preliminary visual inspection for cracks or chips gave nothing, there is always the possibility of moisture getting inside the case. If urgent repair measures are not taken, this will lead to oxidation of the loop contacts, closure of the contact tracks and failure of the electronics.

If the screen response cannot be resumed by software methods, send the iPhone to a service center for repair.

So, I hope now your gadget responds to all your touches. Don’t forget to leave a comment.

comprehensive iPad screen troubleshooting not working

If you have performed the troubleshooting above and the iPad screen is still not working, FoneLab iOS System Restore can help you fix this problem easily.

  • Software troubleshooting causes iPad screen to become unresponsive.
  • Protect your data and files by fixing software problems.
  • Integration of hardware acceleration to improve performance.
  • Compatible with iPad running iOS 13/12/11/10 or earlier.

In short, iOS System Recovery. this is the easiest way to fix the iPad touchscreen not working in some areas.

How to fix iPad not working without data loss

Step 1 Get iOS System Recovery

Download and install the easiest iPad screen recovery tool on your computer and run it.

FoneLab allows you to transfer iPhone / iPad / iPod from DFU mode, recovery mode, Apple logo, headphone mode, etc. to normal without data loss.

  • Fix Disabled iOS System Issues.
  • Extract data from disconnected iOS devices without data loss.
  • It’s safe and easy to use.

Connect your iPad to your computer with a lightning cable and the recovery tool will immediately recognize your device.

Step 2 Set up for iPad screen repair

Hit the Run button to open the next window. Then select Standard Mode and press the Confirm button. Extended mode available when standard mode fails.

Step 3 Repair iPad Screen Not Working

Enter the firmware information depending on the model and system of your iPad. Then click the Repair or Optimize button to start troubleshooting. It only takes a while to complete the process. When your iPad shuts down and restarts, exit the recovery tool and disconnect your device. Your iPad screen should now respond quickly to your touch.

hard reset iPad

Hard-reset is able to clean up memory including background apps and junk files. Your personal data and settings will remain safe. So this is a good way to get rid of the iPad screen not working problem.

On iPad Pro with Face ID: press the Side Compare and Volume Down buttons until the Apple logo appears on the iPad screen.

On an old iPad with a Home button: hold down Power Home Combine the buttons, keep pressing when the power off screen appears, and release when the Apple logo appears on the screen.

Your iPad screen should now work as usual.

restart iPad

When the iPad screen is completely unresponsive, you cannot restart the device with the shutdown screen. In this case, you can still restart your iPad using the button combination.

On an iPad with a Home button: Press and hold the Power button together with the Home button for at least 10 seconds. When you see the Apple logo, release the key combination and let the iPad reboot.

On iPad Pro 2018 and later: quickly press and release the Volume Up button and do the same on the Volume Down button. Hold the Side Compare button until the Apple logo appears.

factory reset from iPad

If iPad keeps freezing and running slowly, it might be time to reset iPad to factory settings. Keep in mind that it will remove all your files and settings. So, you better back up your iPad first.

Step 1 Open the Settings app on the home screen and tap on your name.

Step 2 In-person General Reset and select Erase all content and settings.

Step 3 Enter your password if prompted and start setting iPad to factory settings. When it finishes, your iPad will reboot and display the welcome screen.

How to fix iPad screen not working

If your iPad’s touchscreen isn’t working, don’t worry, read the troubleshooting information below to fix this issue.

restore iPad in recovery mode

Recovery Mode was developed by Apple for iPad users to fix various issues, including iPad screen freezes and won’t turn off.

Step 1 Turn off your iPad. Open iTunes on your computer and update it to the latest version.

Step 2 Press Home and connect the iPad to the device via the lightning cable for older iPad models. For iPad Pro 2018 and later, press the Volume Down button.

Step 3 Now a warning should appear in iTunes which asks you to Restore or Refresh iPad in Recovery Mode.

Note: Restoring iPad in recovery mode will delete your files and settings. We suggest you back up your entire iPad.

Why iPad Screen Doesn’t Work

If the iPad touchscreen stops working when you tap or press any buttons, it means something is wrong on your device. The good news is that touchscreen issues are usually software-related. The most common reasons include:

  • IPad screen is too dirty to detect your touch.
  • Too many unnecessary files and data. Your iPad storage is exhausted and can no longer respond.
  • Some apps that are not optimized for iPad lead to iPad screen not responding.
  • Incorrect software update. Many iPad users update their device when Apple releases a new version. However, the old iPad cannot run the latest version of iOS. This will slow down your iPad.

What can you do when iPad screen is not working

Apple has added many new features with every iOS update; thus, more and more people choose to update their iPad to the latest version. However, sometimes accidents come unexpectedly, such as iPad screen gets stuck.Some users have reported that their iPad is suddenly frozen and unresponsive to touch.

This article explains what to do when the iPad screen stops working, whether you touch it or press the volume buttons.

How to fix iPad blue screen

Why iPad gets Blue Screen of Death? The answer is quite complex and common reasons include:

  • Some apps may cause the iPad to freeze on a blue screen. Sometimes it can be caused by improper operation.
  • Updating software is a big problem. Apple introduces new features with every update. It may contain bugs and errors that will lead to a blue screen of death on iPad.
  • Unknown software problems.

A hardware issue can cause a Blue Screen of Death on iPad, Apple says, although this rarely happens.

If you are an iPhone user, you can check how to fix iPhone blue screen.

FoneLab allows you to transfer iPhone / iPad / iPod from DFU mode, recovery mode, Apple logo, headphone mode, etc. to normal without data loss.

  • Fix Disabled iOS System Issues.
  • Extract data from disconnected iOS devices without data loss.
  • It’s safe and easy to use.
READ  How to reset ipad to factory settings

Way 5: iPad DFU Mode

DFU mode. this is another way to fix the problem with which iPad gets into the blue screen of death.

Step 1 Launch iTunes and connect your iPad to your computer with a USB cable.

Step 2 Turn off iPad, press the Power button for 3 seconds. Then hold the Home button while holding down the Power button.

Step 3 10 seconds later, release the Power button, but keep holding the Home button for 5 seconds. Your iPad now enters DFU mode if the screen remains black.

Note: For iPad Pro 2018 and later, use the Volume Down button to replace the Home button.

Step 4 iTunes should now ask you to update or restore iPad.

Way 1: restart iPad

While rebooting is simple, it can fix a variety of issues, including starting iPad on a blue screen.

Step 1 Press the Power button on the top side of your iPad to bring up the power off screen.

Step 2 Slide the switch from left to right to turn off the device.

Step 3 After a few seconds, hold down Power again to turn on iPad.

Way 2: hard reset iPad

When you get a blue screen on iPad, you can try hard-reset. This is a quick fix for iOS glitches.

On iPad Pro 2018 and later: quickly press and release the Volume Up button and quickly press and release the Volume Down button. Then press and hold the Side Compare button to turn off iPad and turn it back on.

On iPad Air / Mini and earlier: Press and hold Power Home Button combination for a while until the Apple logo appears on your screen.

Way 4: fix iPad in recovery mode

As the name suggests, recovery mode is used to restore your iPad 2 and other models from the blue screen of death.

Step 1 Turn off your iPad. Open iTunes on your computer.

Step 2 Then press and hold Home and connect your iPad to the computer with the lightning cable.

Step 3 When you see the message saying Connect to iTunes on your screen, release the Home button. ITunes should now display a warning about detecting iPad in recovery mode.

Note: If iPad Pro 2019 is running on a blue screen, connect it to PC and open iTunes, press and release the Volume Up key, do the same on the Volume Down and press the Side Compare button until the iTunes Connect screen appears.

Reboot solution

The first and safest method (if the gadget does not react to your touches in any way), since it does not erase data, is a forced reboot. To do this, simultaneously press and hold the “Sleep” and “Home” buttons for 10 seconds until the Apple logo appears.

If the iPad turns on, but continues to ignore (not respond) to touching the screen, we perform the second method. If there is a protective film or cover on the screen, remove it. Using a lint-free soft cloth, thoroughly wipe the screen surface, turn off the device. Restart your iPad as described in the first method.

In some cases, removing the SIM card (if any) and the memory card from the switched off tablet helps. Then you need to wait a few minutes for the self-discharge of the electrical circuits of the device and turn it on without cards.

What to do if iPad is not responding to touch

The most primitive “malfunction” is the use of iPad with gloves. In this case, the screen will not respond, since the principle of its action is specially tuned for direct capacitive contact with parts of the human body. But, I hope that you are not so inattentive)).

Okay, jokes about gloves aside, let’s get down to serious stuff.

A common and relatively harmless case is the freezing of the iPad operating system while using it. This is due to various factors, such as:

  • careless handling leading to mechanical destruction of circuit elements;
  • downloading malware;
  • malfunction of power supply elements.

D Touch Settings

Incorrect registration of touches can lead to a lost software screen alignment. Click on the “General” tab in the “Settings” menu and select “Accessibility”. 3D Touch. Calibrate using the recommended software method.

A similar malfunction is common among older models with resistive matrices. It should be noted that the screen should be calibrated only when the screen is entering data incorrectly or with an offset.

Most expensive malfunction

In addition, the most common cause is failure of the touch screen due to rough handling. Usually these are the consequences of falling or being flooded with common liquids. tea, coffee.

If you have visually revealed chips or cracks on the screen, it has been flooded with liquid and you have not been able to “revive” the device with the above methods, you will not be able to avoid going to the service center. Self-repair can significantly increase the cost of subsequent recovery in case of failure. Especially if the iPad is out of warranty.

That’s all for today, I hope after all the above steps, your iPad responds perfectly to your touches.

White screen

It also happens that the tablet is interrupted by the appearance of a white screen. The reasons for this phenomenon can be hidden in both software and hardware failures.

To get rid of this problem will help:

  • Shutting down iPad by holding the Home and Sleep buttons for about 10 seconds;
  • the so-called “hard reset”. pressing the “Home” button on the front of the device and the “Power” button on the top.

Important! You must hold down the buttons until the tablet completely reboots, until the screen saver with an apple appears on the screen. Device data is not deleted during a forced restart.

What to do if iPad is frozen and unresponsive

This article was brought up by such a common problem as freezing iPad. Despite the fact that it may seem completely frivolous, it can go hand in hand with some serious problems, primarily concerning the operating system of the tablet.

Freeze can occur due to many factors and its “treatment” will also depend on the individual case. Next, we will consider the most common of them and offer options for getting rid of this annoying failure.

When turned on on an apple

Another common mistake is when the device hangs on an apple. the startup screen saver.

The most likely reasons for this behavior iPad can be considered:

  • failure during update;
  • incorrect installation of one or more applications;

In this case, it is recommended:

  • re-write the update;
  • remove the applications causing the conflict;
  • reinstall the OS using a proven firmware;
  • remove contaminants or take the device for repair.

Freezes reasons and solutions

Each of the cases when the device freezes is different.

In general, several categories of problems can be distinguished:

  • lack of response to key presses or interaction with the sensor;
  • inability to get to the “Home” screen;
  • ipad freezes and does not turn off in sleep mode;
  • the gadget does not respond to attempts to disable it;
  • freezing when updating or resetting settings;
  • the appearance of a white screen.

For these failures, the ways to get rid of them will also differ. Below we will tell you more about this.

When updating

If the iPad freezes during the update process, then to restore its functionality, you will need to uninstall the current software version and return the one that was installed before it.

For this we need:

  • use a cable to connect the tablet to a computer with the latest version of iTunes installed;
  • launch the application;
  • simultaneously hold the buttons “Home” and “Power on”;
  • the device will turn on and then restart again;
  • wait for the reboot and remove your finger from the power button while holding “Home”;

Important! Be careful not to disconnect any cables or power to the tablet during the update process. Even if the process ends successfully, the device may not have the files necessary for it to work correctly. In the future, this can lead to serious problems and the need to reinstall the OS.

There may be several problems in this case:

  • software error;
  • problem with the firmware file;
  • failure of the update process.

Faced with one of them, you should understand that they are quite serious and in the future can lead to errors in the operation of the device. The solution can be flashing and re-updating.

Attention! To avoid such problems, it is recommended to use a known working firmware file and not interrupt the tablet update process.

How to restart iPad if it is frozen

If you experience any problems, the iPad is often sufficient to simply reboot. But when freezing, it may not respond to normal restart, touches and other key presses.

A forced reboot will help, which is quite simple to do:

  • hold down and hold the “Power on” and “Home” buttons to turn off the frozen device;
  • we are waiting for the new launch and the appearance of the start screen saver.

If the problem persists, repeat this procedure, then contact the repair shop.

Note! The reboot time for each specific case can range from 2 to 30 seconds. After that, the device will be ready for use again and the information on it will be completely saved. This process is the same for iPad 2 and other Apple devices.

We should also mention the tablet freezing due to mechanical damage.

The most common of them are:

  • moisture ingress on the device;
  • overheating or hypothermia;
  • dust penetration into its body;
  • bumps, tablet drop.

If after that there are problems with the operation of the iPad, then you should pay attention to several points:

  • if moisture gets on the device, it must be removed immediately using a soft cloth, sponge or dry napkins;

Important! A hairdryer is also suitable for this, but it is very important not to use heating modes. this can lead to overheating and subsequent damage to the device. You can remove moisture from it only with cold air and very carefully.

Mikrotik. quick configuration of the RB951G-2HnD access point. details here.

Step-by-step configuration of the D-LINK DIR 620 router for Beeline. Read more.

  • try not to leave the iPad in the sun for a long time and only carry it in a bag, protecting it from the elements;
  • timely clean the tablet from dust, on your own or by contacting a service center;
  • after a fall, if errors continue to appear again and again, we recommend that you seek professional help.

Attention! It is recommended to disassemble the tablet on your own only if you already have similar experience.

So, we have considered all the most common reasons that can lead to a freeze tablet. In many of the above cases, the problem that has arisen can be easily solved at home, but when the failure is not software, but hardware in nature, the best solution would be to contact a specialist.