How to turn on the set-top box to the TV on the remote

All about connecting a TV set-top box to a laptop

turn, set-top, remote

The main purpose of TV set-top boxes is to connect to TV sets. However, in some situations, the most appropriate solution would be to connect a TV set-top box to a computer or laptop monitor. It is worth considering in more detail what it is for and how to properly connect.

Why is it necessary?

The advantage of a laptop is that it is more convenient to use it in many cases, including when watching TV channels. It is a mobile technique that can be transported with ease. The only drawback of the laptop is the small screen, which is not very convenient for watching TV or movies.

It is in this case that the TV box becomes the solution. It is worth noting that recently laptop manufacturers have been releasing many models with a built-in T2 tuner, but they are mostly expensive.

The most preferable option would be to purchase a laptop with the ability to connect an external T2.

The advantages of using a TV box are obvious. It allows you to:

  • display TV content on the monitor;
  • use a laptop as a recording device;
  • listen to the radio;
  • pause viewing;
  • control watch time.

Connection methods

There are several options for operating a laptop with a TV set-top box. However, none of the methods is possible without connecting the device to the Internet. Therefore, first you need to provide access to the resource. The first two connection options are based on the use of Internet TV and cable.

  • Internet TV. In this case, you will need to ensure the maximum connection speed. To start the broadcast, you need to find the required channel in the search engine and click on it.
  • Cable instead of antenna. Some providers provide the ability to configure your laptop to watch digital channels. To do this, you need to install the application, log in to the system and connect to your home TV. The advantage of the method is that you can watch TV programs from any device with a screen.

The most popular and convenient way is to use a computer to play TV programs through an external T2 tuner.

Before setting up the reception of channels, you will need to install a special program that is recorded on the disc that comes with the set-top box.

To operate such a system, you will need to ensure the correct connection not only to the TV, but also to the laptop. To do this, you need to install special drivers that will allow the computer to connect to the tuner. It is better to restart the PC to save the changes. If all actions are performed correctly, a shortcut for the TV set-top box will appear on the laptop desktop. After that, you should connect the T2 tuner using a USB cable, then the system will determine the program playback algorithm on its own.

How to connect via antenna cable

Even if you don’t have an AV cable, you can find other ways to connect. It is enough to act according to the following scheme:

  • Find audio and video outputs on the Sega case.
  • Insert the supplied modulator into it, from which the coaxial cable departs.
  • Pull the antenna wire from the Sega to the TV, insert it into the corresponding socket.
  • Turn on the console, insert the cartridge into it.

On the TV, you need to go to the auto program search mode. In manual mode, you can find the desired frequencies between the terrestrial channels TNT and STS. If you find the one on which the signal from the Sega is broadcast, you can start the game.

This method looks simpler. It is similar to the one that was used when working with analog TVs of the CRT type.

AV port connection

Even a TV designed to receive a digital signal has analog connectors in its configuration. In addition to the set-top box, in turn, there is an AV wire with cinch plugs for transmitting an audio signal and broadcasting a picture from the set-top box. The TV case may have an AV input. it is located on the side or on the back of the case, it is designated INPUT. Such a block looks like a row of colored connectors, among which there are white and yellow. It is on this basis that the plugs are also connected in the future. it is quite difficult to confuse them.

READ  Sony xperia phone won't turn on

The procedure for connecting via an AV cable looks like this:

  • The power supply unit of the Sega console is inserted into the network, the wire from it with the plug must be connected to the connector on the console. It is located on the back of the case. Before connecting to the network, make sure that the power button is not pressed, is in the off position.
  • Connect the AV cable to the connectors, first on the set-top box, then on the TV. To broadcast sound in mono mode, you only need a white plug, yellow is responsible for transmitting a picture over a video channel.
  • Turn on the game console and TV, you need to wait for the devices to load and make sure the game cartridge is inserted correctly.
  • On the remote control, you should turn on the AV / AV1 signal reception mode. Modern TVs allow you to do it in 1 touch.
  • A joystick with a Start button can be connected to the left output of the set-top box. It is the main one, used to make a choice by menu items.
  • Start the game, you should make sure that the sound and picture are transmitted correctly. If there is no picture, you can try to search through the channels to find out what is receiving the signal from the Sega set-top box.

If the normal AV jack is not detected, you can use the component input if available.

Such a module has 5 or more connectors in series. Here you need to find a jack marked Y, where a yellow plug is inserted for transmitting a video signal, and L for transmitting sound from a set-top box. On the Sega case, the cable connects to similar connectors. White in audio, yellow in video input.

SCART is a contact group that already contains all the components for receiving an audio or video signal. You can also connect a Sega console to it, but you need an adapter. It is inserted directly into the SCART connector and used as a splitter to connect an external analog device. Look for the right socket on the back of the TV panel.

Determining which scheme will succeed in making an AV cable connection is only possible by trial and error. Manufacturers of various brands of modern television equipment do not seek to make life easier for users. The algorithms they use for switching between video inputs can differ noticeably, it is unlikely that it will be possible to determine the appropriate option right away.

How to connect Sega to a modern TV?

Ways to connect Sega to a new TV are of interest to many fans of 16-bit games who do not want to part with their favorite heroes of the past decades. True gamers today are ready to fight dragons and beat enemies in space on a console that they bought in their youth, only flat LED screens are not much like classic CRT models.

How to connect your Sega to a new TV, set it up for work. worth talking in more detail.

Features of synchronization with modern TVs

Connecting Sega to a new Smart TV or even an inexpensive LED model will not work without additional tweaks. Support for such devices is simply not provided here, since they work through an analog connection, while television equipment uses a digital signal. Of course, you can turn on the set-top box using an old CRT TV, but there are much more interesting ways to solve the problem.

Among the main features of connecting a modern digital TV receiver with Sega, the following important points can be highlighted:

  • Low picture resolution. After connecting, complete frustration can ensue. Honor needs that a 320 × 224 picture will be broadcast in its natural quality, on TV with UHD, Full HD this will be especially noticeable. The picture will be very pixelated and indistinct, this feature will not be so noticeable on CRT devices. The problem can be corrected by setting the minimum screen resolution in the TV settings.
  • The light gun will not work. Shooting games, so beloved by fans of eight-bit consoles, will have to be put aside. This is due to the fact that the LCD screen does not give a sharp change in dark and light spots, respectively, the sensitivity of the photocell in the pistol is not enough. In addition, the picture in digital TV has a certain signal delay, which is absent in CRT models.
  • When connected via component input, the image is black and white. The problem is solved by switching the equipment to an analog signal. This is done from the remote control, in a few touches. After that, the picture will be in color, not black and white.
  • The AV connection through the white and yellow outputs does not work on Samsung TVs. Connection here is made through yellow-green connectors, with the additional installation of an adapter to SCART.
  • LG TVs have AV connection problems. But here there is the possibility of using a video signal amplifier.
READ  How to turn off animations on iPhone

For best results, install an A / V converter in the HDMI connector.

These are the main features that Honor has when syncing a signal from a 16-bit Sega console to a digital-ready TV or plasma display.

Precautions

When using the SEGA console to play with the broadcast of a picture to a modern digital TV, certain precautions should be taken:

  • Avoid switching cords or replacing the cartridge without disconnecting the power from the mains. Before any manipulation with it, the game console must be de-energized.
  • At the end of the game process, do not leave the cartridge in the slot. Carelessness in this matter can lead to the failure of structural elements of equipment.
  • Take good care of cables and wires. This is the weakest point of Sega game consoles. It can be very difficult to find an authentic joystick or power supply unit, especially for old consoles from 30 years ago.
  • Eliminate negative thermal and mechanical effects. The attachment should be installed so that it is not near the radiator or in direct sunlight, protected from water.

If the 16-bit gaming console has not been used for a long time, dusting on the shelf, in order to avoid a short circuit, it is recommended to thoroughly clean it from dust inside the case. If the wires and accessory cables are damaged, they must be replaced. It is optimal if the games will be run not with the rarity equipment of the early 90s of the XX century, but with its more modern versions.

In more detail one of the above methods of connecting Sega to a modern TV is discussed in the following video.

Installation and connection

Power supply comes from the AC 220V 50Hz with the connection of the mains adapter of the established sample. The adapter is connected to the power input located on the back of the set-top box. The power switch (“POWER” button) is located on the top panel of the set-top box.

Joystick functions

  • The START button starts the game, and also turns on / off the pause during the game.
  • The arrow buttons on the left control movement in the game
  • Buttons A, B, C control the main actions of the game: shooting, jumping, etc.
  • Buttons X, Y. Z serve, as a rule, for additional actions of the hero in complex games.

The specific purpose of the A, B, C, X, Y, Z buttons depends on the game.

Connecting to a TV via AV input (in this case, the color and graphics will be the best)

  • Insert the combo plug of the AV cable into the AV output of the set-top box located on the rear panel.
  • Insert the yellow plug of the AV cable into the video input and the white plug into the audio input of the TV.
  • Put your TV in AV mode.

Possible malfunctions and methods of their correction

If a malfunction occurs in the operation of the set-top box, then it is caused, as a rule, by an insignificant reason. Before claiming a warranty, perform the following checks:

AV port connection

Even a TV designed to receive a digital signal has analog connectors in its configuration. In addition to the set-top box, in turn, there is an AV wire with cinch plugs for transmitting an audio signal and broadcasting a picture from the set-top box. The TV case may have an AV input. it is located on the side or on the back of the case, it is designated INPUT. Such a block looks like a row of colored connectors, among which there are white and yellow. It is on this basis that the plugs are also connected in the future. it is quite difficult to confuse them.

READ  Lenovo laptop does not turn on black screen

The procedure for connecting via an AV cable looks like this:

  • The power supply unit of the Sega console is inserted into the network, the wire from it with the plug must be connected to the connector on the console. It is located on the back of the case. Before connecting to the network, make sure that the power button is not pressed, is in the off position.
  • Connect the AV cable to the connectors, first on the set-top box, then on the TV. To broadcast sound in mono mode, you only need a white plug, yellow is responsible for transmitting a picture over a video channel.
  • Turn on the game console and TV, you need to wait for the devices to load and make sure the game cartridge is inserted correctly.
  • On the remote control, you should turn on the AV / AV1 signal reception mode. Modern TVs allow you to do it in 1 touch.
  • A joystick with a Start button can be connected to the left output of the set-top box. It is the main one, used to make a choice by menu items.
  • Start the game, you should make sure that the sound and picture are transmitted correctly. If there is no picture, you can try to search through the channels to find out what is receiving the signal from the Sega set-top box.

If the normal AV jack is not detected, you can use the component input if available.

Such a module has 5 or more connectors in series. Here you need to find a jack marked Y, where a yellow plug is inserted for transmitting a video signal, and L for transmitting sound from a set-top box. On the Sega case, the cable connects to similar connectors. White in audio, yellow in video input.

SCART is a contact group that already contains all the components for receiving an audio or video signal. You can also connect a Sega console to it, but you need an adapter. It is inserted directly into the SCART connector and used as a splitter to connect an external analog device. Look for the right socket on the back of the TV panel.

Determining which scheme will succeed in making an AV cable connection is only possible by trial and error. Manufacturers of various brands of modern television equipment do not seek to make life easier for users. The algorithms they use for switching between video inputs can differ noticeably, it is unlikely that it will be possible to determine the appropriate option right away.

Published by kachlife on 27.10.

The development of computer technologies affected not only the technical parameters of the “hardware”, the software has undergone significant changes. Compared to what was on the SEGA, Dandy game consoles at the end of the last century and the beginning of this century, now completely different pictures have appeared on the screens. The evolution of software has radically changed the external and internal world of computer games. improved graphics, increased functionality, increased productivity. But real gamers know how it all began, and those clumsy, at first glance, a modern user toys evoke more emotions than the most advanced gaming software.

We connect Sega to a computer monitor

To enjoy the good old games, it is not necessary to connect the set-top box to the TV, you can use a monitor for this purpose. To bring this idea to life, you need a video adapter or TV tuner. You can use the built-in device integrated into the computer, but better portable, which transmits the signal through the HDMI jack.

To start new equipment, you need to install drivers and configure new computer software. For the convenience of using the set-top box through a TV tuner, it is recommended to install a special AverTV program. After completing all the settings, connect the SEGA tuner or adapter in the same way as described in the subsection “Connecting with an AV cable”, and start playing your favorite games.