How to turn on iPhone if it won’t turn on

Correct switching on with the key

Not all users know how to properly turn on and off mobile devices. Your iPhone 4 may be completely functional, but you are just doing the wrong startup procedure. To turn on the phone correctly, you need to do the following:

  • If the battery is low, connect your phone to a power source.
  • After a while, hold down the power key on the top panel of the device and hold it for 10-15 seconds.
  • As a result, the Apple logo should appear on the screen, and after 30-40 seconds the operating system will boot.

turn, iphone

If this option did not help, then test another one: simultaneously hold down the power and Home keys for 10 seconds. Repeat the action several times. If the phone does not turn on, then the reason should be sought in faulty firmware or hardware failure.

Accumulator charging

The first thing you should do when a problem occurs is to fully charge the battery. The battery may be completely discharged, which is why you cannot start your iPhone. Connect the charger along with the cable to the corresponding connector and look at the screen. After a few seconds, the corresponding indicator will appear on it. Below it is an icon indicating that it is connected to a power source.

However, in this situation, the iPhone 4 user may face the following problems:

  • When you press the power key, the low battery indicator does not appear. In this case, you can blame the malfunction of the physical button.
  • When the charging is connected, the corresponding icon does not appear, and the phone screen goes out. There are two options here: a faulty iPhone connector or a cable with a charger block.

How to turn on iPhone 4 if it turned off and won’t turn on

Despite the almost annual release of new iPhone models, many still use old models, up to the 4th generation. Accordingly, due to wear and tear of the device, problems in performance and even normal startup may occur. Today we are going to talk about how to turn on iPhone 4 if it turned off and won’t turn on.

These tips apply to iPhone models with a Home button. You can fix most of the software problems on your own, but if we are talking about a breakdown of hardware, then you cannot do without contacting a service center.

Restore via iTunes

If when you try to turn on the phone does not respond or displays an endless boot in the form of the Apple logo, you should use the Recover Mode to recover. To complete this procedure, you will need:

  • defective iPhone 4;
  • cable for connecting to a PC;
  • installed iTunes package.

First you need to install the program and driver for iTunes, and then put your phone into recovery mode. To do this, hold down the Home key. Without releasing the button, connect the PC cable to the charging connector.

At this point, iTunes should detect the connected device and display a corresponding notification that the iPhone is in Recovery mode. Using this mode, you can perform a full reset or install the OS firmware. In our situation, it is necessary to reset the device to factory settings. In the device information window, you can back up your personal data to a PC or iCloud. After that, start the procedure with the “Restore iPhone” button.

To install a new version of the OS, you must first download the firmware files to your computer.

If the breakdown of the iPhone 4 was preceded by mechanical stress, water ingress, overheating, etc., then hardware damage is most likely the cause. Take the phone to a service center for diagnostics, but first try to turn it on using our instructions.

We conclude the guide to recover iPhone 4 and hope that with these recommendations you can easily identify the problem and turn on your mobile device! If you want to clarify any points from the instructions, then ask for help in the Комментарии и мнения владельцев.

How to turn on iPhone even if it won’t turn on: all methods and solutions

Hello everyone! Today we are going to talk about how to turn on the iPhone, even if it does not turn on. Before you start to panic, double-check that you are activating the device correctly. I’ll be your cap and tell you that it is the power button that needs to be pressed. The button on all iPhone models is in the same place. to the right or to the top when looking at the screen facing forward.

If your finger has already turned blue, and the iPhone still refuses to turn on, then you are welcome to read this article. Below, I cover the main ways on how to turn off your iPhone if it doesn’t respond when you press the power button. If something does not work out for you or questions arise in the process, then write them in the Комментарии и мнения владельцев, and I will definitely help you.

Solving power-on problems

First of all, put the device on charge. With a highly discharged battery, the smartphone will not show any signs at all, even when charging is connected. Therefore, here you will need to wait at least 1 hour until the battery is at least a little charged, and only then it can be turned on again. This is especially true when the device has been in the cold for a long time. After that, you should see a rechargeable battery icon on the screen.

Perhaps the iPhone or iPad just froze on system startup. In this case, you can see the Yabloko logo constantly displayed. In fact, it may not be displayed, and then, you will see just a black screen. You can try restarting it with a hard restart. It is desirable that at the same time you have the device on charge.

  • New models with FaceID and iPhone8. press and release the volume up button, then similarly click and release the volume down button. Next, quickly hold and hold the power button.
  • iPhone 7th generation. hold down and hold the top (or side) power button and volume down button.
  • On iPhones 6, 6S, 5, 5S, 4, 4S, as well as iPad with Home button. hold down the Home button and the top or side power button.

If a hard reboot doesn’t work, then there are a couple more things you can do. Use a cable to connect your iPhone to your computer. On macOS, open Finder, and on a Windows PC, you will need to install and run iTunes.

The connected device should be displayed in iTunes, to do this, click on the corresponding icon. If the connection was successful, then we do everything the same as we did earlier (see the list of items earlier), when we did a hard reboot, but now the smartphone should not reboot, but enter the “Recovery” mode.

Once you do everything right, a window like this will pop up on the iTunes or Finder screen, where you will be prompted to restore or update the phone system. You need to click on the “Update” button. After that, the system will be restored to the factory configuration, but all user data that was on the smartphone will remain intact, so do not worry about that. Perhaps there was a failure in the files that start the system, and we are trying to restore them.

READ  How to set up headphones on iPhone 7

If nothing works for you, and the smartphone refuses to somehow react to your actions, then check the integrity of the cable and power supply. they may be faulty.

It also very often happens when, during a fall, the main loop flies out, which goes to all the hardware. The principle is simple. you drop your smartphone, the train jumps out from the impact. In fact, it is enough to simply turn it back on, and at the same time you do not need to go anywhere and pay money. This is described in great detail in the video below.

Restore iPhone via iTunes

If the iPhone does not turn on even after connecting to the computer, then only restoration will help out.

❗ In most cases, recovery involves deleting all data from the device. You can return them only if you have an up-to-date backup.

Connect iPhone to computer with USB cable and launch iTunes (Finder window in macOS Catalina).

Enter iPhone into recovery mode. For this:

Note: iPhone must be connected to computer via USB cable.

  • On iPhone 6s, iPhone 6, iPhone 5s, and earlier. Press the Home and Power buttons (power button, located on the side or top of the case) at the same time for about 20 seconds until the iTunes logo appears on the screen (laptop logo in iOS 13).
  • On iPhone 7 and iPhone 7 Plus. Press and hold the Volume Down and Power (Side) buttons at the same time for about 20 seconds until the iTunes logo appears (the laptop logo in iOS 13).
  • On iPhone 8/8 Plus, iPhone X and later. Press and immediately release the volume up button. Press and immediately release the volume down button. Then hold down the side button and hold it for about 20 seconds until the iTunes logo appears (laptop logo in iOS 13).

iTunes will report detecting iPhone in recovery mode. In the window that opens, select “Update”. Initially, this option should be selected, as it can allow you to return the device to a working state without losing data.

If data lossless recovery is possible, the iPhone update process will start. Wait for it to end. ❗ Never disconnect your iPhone from your computer.

If the update fails, then a recovery should be performed. Re-enter iPhone into recovery mode (step) and in the iTunes window that opens, select “Recover”. Wait for the end of the operation.

Updating or restoring will bring your iPhone back to working condition.

Connect iPhone to iTunes in Recovery Mode

If the iPhone does not respond to either charging or hard restarting, the smartphone must be put into recovery mode. Here we immediately note that you may not need to directly restore the iPhone. Everything in order.

The first step is to try to get your iPhone back in working order without restoring it. This method has saved thousands of iPhones without erasing data, which implies recovery. Therefore, we strongly recommend that you initially use it.

Connect iPhone to computer with USB cable and launch iTunes (Finder window in macOS Catalina).

Enter iPhone into recovery mode. For this:

Note: iPhone must be connected to computer via USB cable.

  • On iPhone 6s, iPhone 6, iPhone 5s, and earlier. Press the Home and Power buttons (power button, located on the side or top of the case) at the same time for about 20 seconds until the iTunes logo appears on the screen (laptop logo in iOS 13).
  • On iPhone 7 and iPhone 7 Plus. Press and hold the Volume Down and Power (Side) buttons at the same time for about 20 seconds until the iTunes logo appears (the laptop logo in iOS 13).
  • On iPhone 8/8 Plus, iPhone X and later. Press and immediately release the volume up button. Press and immediately release the volume down button. Then hold down the side button and hold it for about 20 seconds until the iTunes logo appears (laptop logo in iOS 13).

In the iTunes window, click “Eject iPhone”.

Restart your iPhone. To do this, simply hold down the Power button (side button). Alternatively, you can perform a forced reboot using the method described above.

As a result of this operation, your iPhone can turn on and work again as before without the need to restore.

Connect iPhone to charger

Often, the iPhone won’t turn on and show no signs of life due to the fact that its battery is dead. Connect your smartphone to the charger and leave it connected for an hour.

Here are some important tips to keep in mind:

  • Use original or quality charging accessories. There have been cases in which the iPhone turned off due to a dead battery, but did not charge due to using a broken charging adapter or cable. Be sure to make sure the charger and cable are in working order.
  • Charge iPhone with electricity. It is very common for users to charge their iPhone from a computer USB port. But due to the old battery in the smartphone and the low power of the connector, charging simply does not occur.
  • Check if the connector is dirty. Sometimes iPhone won’t start charging due to a heavily soiled Lightning connector. Examine the charging port. If it is really dirty, clean it gently, for example with a toothpick.

⚡ How to understand that the iPhone has started charging?

If the battery logo with the Lightning cable is on the screen. iPhone does not charge and asks to connect to the charger. If this logo is displayed after you put the iPhone on charge, then the cable or adapter is out of order. Use other charging accessories.

If only the battery is displayed on the screen, then charging is successful. It is worth worrying only if this logo is displayed without changes for more than 30 minutes. In this case, you should also replace the charging adapter and cable.

Correct switching on with the key

Not all users know how to properly turn on and off mobile devices. Your iPhone 4 may be completely functional, but you are just doing the wrong startup procedure. To turn on the phone correctly, you need to do the following:

How To Fix iPhone That Won’t Turn On

  • If the battery is low, connect your phone to a power source.
  • After a while, hold down the power key on the top panel of the device and hold it for 10-15 seconds.
  • As a result, the Apple logo should appear on the screen, and after 30-40 seconds the operating system will boot.

If this option did not help, then test another one: simultaneously hold down the power and Home keys for 10 seconds. Repeat the action several times. If the phone does not turn on, then the reason should be sought in faulty firmware or hardware failure.

? Remember how a forced reboot is performed on your device. It can help with most of these crashes that can happen on the iPhone.

A forced reboot is completely safe. Its execution does not delete any data on the iPhone, so you can perform it without fear.

READ  Transfer viber from iPhone to Android

❗ Methods to restore iPhone in this tutorial are arranged from easy to hard. If a hard reset doesn’t work, go to the next method. He will have to help solve the problem.

If all methods did not work

What if you tried everything, but the apple did not appear on the screen of your iPhone? There is a special recovery mode. DFU. It is designed to restore iOS firmware in the event that all your other attempts have failed. We must say right away that this mode should be used only as a last resort, because when it is activated, all data from the iPhone will be lost.

So, first you need to connect to the charge for five to ten minutes. Once connected to your computer, check if the device is found in iTunes. If this does not happen, switch to DFU mode: simultaneously hold down the HOME and POVER buttons for ten seconds, then release the POVER. Then hold the HOME button for fifteen to thirty seconds until iTunes writes “Recovery Mode”. Do not expect further that the screen will thank you and show, as usual, an apple. The evidence of a successful entry into DFU is the absence of any image on the screen. If you want to restore the firmware to your iPhone, find the “Restore iPhone” button in iTunes. To exit this mode, simply disconnect the cable from the device and press “HOME” and “POVER” for ten seconds. After these manipulations, the iPhone should reboot.

DFU mode

If your iPhone won’t turn on, even after the one tried above, there remains one more way. restore iPhone in DFU (Device Firmware Update) mode. To start the iPhone in DFU mode, you must clearly follow the instructions provided in the link above.

If you need to put iPhone X or 8 into DFU mode. read this article

The service center will come to the rescue

If, despite all the efforts, the iPhone could not be reanimated on its own, you will have to seek help from specialists. But remember that only with the right handling, your favorite gadget will serve you faithfully for many years.

As you probably know, the iPhone and iPad did not descend from heaven to us but from the “Jobs garage”. Therefore, like everything material in this world, these gadgets are not perfect in their essence and can glitch and freeze. If your iPhone suddenly stops turning on, you’ve come to the right place. In this article, we’ll take a look at the most common iPhone won’t turn on problems and try to find a solution for each of them. Now stop panicking and relax Now we will fix everything

If you dropped your iPad from the 14th floor, or washed your iPhone with your jeans, this article is unlikely to help you. Here and so it should be clear that the device has suffered quite serious damage. In such a situation, it is better not to guess “Why does the iPhone not turn on?”, But immediately contact the service center.

  • If you still drowned your iPhone in the toilet. read this article.
  • Need to unlock iPhone or bypass Activation Lock. read this article
  • iPhone stuck on the “Slide to Update” screen. read this article
  • Don’t know how to restart your iPhone?. read this article

Suppose you don’t know the reason why your iPhone stopped turning on? Then let’s focus on the sympathies given by your device, and then decide what can be done in each similar case.

If the screen is black

When the iPhone looks at you with a blank, black screen, don’t panic. This does not mean that it is finished. Most likely, the reason is that the battery is completely discharged. The second reason may be a frozen iOS. It is easy to rehabilitate the device. The main thing is to do exactly what we tell you.

If the reason that the battery is discharged is the long stay of the iPhone in the cold, then first you should warm your device in your palms. Then connect the device to the charger for fifteen minutes. If the reason for the non-working iPhone is in a discharged battery, it will soon turn on. If this did not happen, it is possible that the frozen iOS is to blame. Then you need to press the HOME and POVER buttons simultaneously and hold them for ten to twenty seconds. You will soon see an apple on the screen. Release the buttons and after about a minute iOS will launch.

If in this case the long-awaited apple does not burn, we will tell you what to do. You need to turn silent mode on / off on iPhone two to three times in a row. Then plug in the charger for fifteen minutes. This operation, as a rule, always gives a positive result.

If these steps are unsuccessful, try changing the charger and cable. Perhaps they are the ones responsible for the iPhone not turning on. If, moreover, you are using not the original, but a cheap Chinese fake, this may be the reason.

Why iPhone won’t turn on?

It is not worth thinking about why the iPhone 5 and any other model does not turn on for a long time if it was externally exposed to unwanted influences:

  • Perhaps the smartphone was dropped into the water, even a short-term immersion or rain can provoke a short circuit and refusal to work. If the phone was really drowned, you should not turn it on right away, on the contrary, turn it off and put it off to dry. After 1 day, try to turn it on, so the probability of restoring its work is higher, otherwise a short circuit will occur at startup and the smartphone will be unusable;
  • Mechanical damage. An iPhone, falling from a height, often takes a hit on the display, and the insides are less likely to suffer. There is no way out except to give the smartphone for repair;
  • Freezing. Batteries are afraid of prolonged exposure to frost, and at one point they lose all their charge due to a chemical reaction. You need to warm it up in your hands, and then try to start it, most likely you will have to charge it.

In these cases, it is possible to eliminate the malfunction only at service centers. There are a number of other reasons that lead to a freeze, some of which can be easily eliminated.

How To Fix STUCK AT APPLE LOGO ENDLESS REBOOT Trick iOS 12 iPhone, iPod & iPad

IPhone Recovery Mode

STEP 1 Launch iTunes on your computer and connect the USB cable (you do not need to connect the USB cable to the phone yet)

STEP 2 Turn off the iPhone while holding the HOME POWER buttons (for iPhone 7, 8 and X combinations are listed above)

STEP 3 Press and hold the HOME button and connect the USB cable to the device

STEP 4 Hold the HOME button until the iTunes logo and a plug image are displayed on the device screen

STEP 5 A notification will appear on the computer screen stating that the device is in recovery mode

READ  How to remove a SIM card from an iPhone

STEP 6 Now just click the Restore button Before restoring your iPhone to factory settings, your computer will need to download the latest version of iOS from Apple’s servers. In this case, the phone will lie with the screen off and show no signs of life. Even with a good fast internet connection, the download process can take 40 minutes or more. If your internet connection is unstable or slow, the process may never complete. Connect to a faster Wi-Fi connection.

What to do if iPhone won’t turn on?

The iPhone is not an eternal device, although it breaks down a little less often than Android, but still it is not uncommon, then the question arises of what to do if the iPhone does not turn on. Gadgets often break down, freeze and stop responding to user actions. Often the reason is mechanical or external damage to the device, but this is not always the case.

Why iPhone won’t turn on?

It is not worth thinking about why the iPhone 5 and any other model does not turn on for a long time if it was externally exposed to unwanted influences:

  • Perhaps the smartphone was dropped into the water, even a short-term immersion or rain can provoke a short circuit and refusal to work. If the phone was really drowned, you should not turn it on right away, on the contrary, turn it off and put it off to dry. After 1 day, try to turn it on, so the probability of restoring its work is higher, otherwise a short circuit will occur at startup and the smartphone will be unusable;
  • Mechanical damage. An iPhone, falling from a height, often takes a hit on the display, and the insides are less likely to suffer. There is no way out except to give the smartphone for repair;
  • Freezing. Batteries are afraid of prolonged exposure to frost, and at one point they lose all their charge due to a chemical reaction. You need to warm it up in your hands, and then try to start it, most likely you will have to charge it.

In these cases, it is possible to eliminate the malfunction only at service centers. There are a number of other reasons that lead to a freeze, some of which can be easily eliminated.

IPhone 4, 5, 6, or 7 won’t turn on. power adapter

A fairly common problem that the iPhone 5s does not turn on is a power failure situation. The user, even when connected, may not see any reaction of the smartphone, but often they do not even suspect about such a banal solution to the problem as charging.

The iPhone owner needs to connect it to a charger, no matter what power source: 220 V network, car or computer. Do not be alarmed if there is no immediate reaction. With deep discharge, for example, when the phone freezes, it takes time for the charging indicator to appear. It is worth waiting at least a few minutes, usually this time is sufficient. It is better to put it on charge for 1 hour, and then try to turn it on, do not forget about the previous method, it is still applicable now. Sometimes the process does not start, this can provoke various mechanical problems.

  • Check the cleanliness of the connectors, remove all kinds of foreign objects and dirt with a needle or brush;
  • Make sure that there are no kinks in the wire, probably there are interruptions;
  • Check the tightness of the contacts, perhaps the wire does not enter completely, then you will have to determine the reason for this;
  • We strongly recommend using original chargers. Lightning cables from Chinese manufacturers overheat during operation, may have insufficient power to charge or practically no power;
  • Sometimes the power or charging controller fails, then you will have to use the services of a service center.

iPhone Shut Down and Won’t Turn On. Force Start

If the iPhone 5s turns off and does not turn on, you should use the function that forces the smartphone to start. The method is relevant for those cases when the smartphone is frozen at some stage, perhaps only a black screen is shown, but the backlight is working, or after turning off, the phone stops turning on. In this case, the procedure does not clear the device data, so it should be used initially. For each version of the iPhone, there is the same key combination, only in the latest 7th model it is different:

How to Fix My iPhone won’t Turn On (iPhone dead)

  • Hold down the Home button and the Power button at the same time. The hold time should be more than 10 seconds, usually up to 20 seconds. Then, the Apple logo appears on the screen in the form of an apple. This option works for all versions except iPhone 7;
  • A separate, more familiar approach is used in the new version, you need to hold Power and the volume control, namely the volume down button. Similarly, you need to hold until the action on the screen begins.

The problem can be fixed by this method, but there are several additional methods.

How to turn on iPhone if it won’t turn on?

It happens that the iPhone charges, but does not turn on, especially often it reaches the logo and freezes at this moment or turns off. In this case, you can apply recovery mode. To use it, you need to have a computer at hand. It is highly desirable that the iPhone has already been connected to it beforehand, and the PC has been added to a trusted source of the connection, but this may not be useful.

  • Connect your smartphone and computer;
  • Launch iTunes;
  • Perform a forced restart of the device. Home (for the 7th version, the volume down button) and Power;
  • A message will appear on the computer screen allowing you to restore the operation of the iOS system, you should click on “Update”.

In this case, an attempt will be made to install the operating system without erasing the files. You may need to completely restore your iPhone to factory settings. Then in iTunes you will have to go to the main tab and click “Restore”.

Ultimately, if iPhone 6, iPhone 7, or any other version still won’t turn on, you need to contact technical support. They will remotely provide instructions on how to fix the problem, if this does not help, then they will direct you to the service center closest to you. This will mean that the problem is of a technical nature and the user is powerless here.

If the smartphone was used with care and charged with original chargers, then most likely it will be possible to restore its operation using the described methods. Otherwise, you will have to give the device to experts.

No votes yet! Be the first to rate this post.