How to tune your LG TV to digital TV

How to tune satellite channels

Considering the question of how to tune an LG TV to receive channels from satellite, you need to know that satellite TV can be installed manually and automatically.

Manual search

It is used if the satellite parameters have changed or the standard settings do not match the connection type. The algorithm is as follows:

  • Select “Satellite Settings”.
  • We set the necessary parameters (you can get them from the TV service provider).
  • Launching a search for new parameters.

Manual way

To install manually, you need to follow the following sequence of actions:

  • We find out the parameters for setting on the website of the operator of television services.
  • Go to the “Menu” section.
  • Select the “Channels” tab.
  • Turn on “Cable TV” (newer TV models may not have this function).
  • We pass on the button “Manual setting”. You will need to enter operator parameters in the appropriate fields.
  • The search process starts, at the end of which the user receives a free digital TV.

All Ways to Tune Channels on LG TV

Correct configuration of TV channels is an important stage of equipment connection. Below we will look at how to tune channels on a good quality LG TV in a few minutes. There are several ways to install channels on the modules of this company, which differ from the type of TV and the TV signal format (analog, digital or satellite) selected by the user. The article contains step-by-step instructions for installing each of them.

tune, digital

How to set up a TV with Smart TV

The majority of users are increasingly switching to Smart TVs, which receive high quality TV signals, allow them to use the Internet at home via Wi-Fi or cable connection. For comfortable viewing, you need to know how to tune channels on your LG Smart TV. To do this, follow the instructions below:

  • Go to the “Settings” of the receiver.
  • We select the type of network connection. The drop-down list will show a choice between wired and wireless connection.
  • After choosing the type of connection, click “Finish”.
  • We register on a special portal LG. You will need to come up with a username and password, confirm authorization by email.

Registration form on the LG Smart World website

  • We go to your personal account with your username and password.
  • Download the SS IPTV application. with the help of which the channel tuning on the LG TV is realized according to the standard algorithms discussed above.
  • How to tune digital TV channels

    Setting up an LG TV to receive digital TV is a popular question among users, since this TV signal format is supported on all existing TV models (LCD, LED, Smart and plasma panels).

    Automatic way

    To find digital TV channels by autosearch, follow the following step-by-step instructions:

    • The remote has a “HOME” button that you need to press.
    • Follow the “Settings” tab.
    • We select “Options”. At this stage, the country of residence is selected. For models manufactured after 2011, this is Russia, and for earlier receivers, Germany.
    • If a European state is selected, then in the “Languages” tab, change the operating language to “Russian”.
    • We return to the “Settings” tab.
    • Choose “Autosearch”.
    • In the window that appears, select the signal type “Cable”. If such a window does not appear, then the country is selected incorrectly. It is required to return to the previous steps.
    • If the algorithm is followed, you will need to set the “Fast scan”. We enter the following data: frequency H. 247000, frequency K. 770000, modulation. 256, LD. auto.
    • We make additional custom settings to choose from: only digital TV. the module will search for analog and DTV television, automatic numbering. all channels will be automatically numbered, skipping of encoded channels. connection of paid signals is excluded.
    • We start the search and just wait (about 20 minutes).
    • Installation is complete, you can enjoy watching high quality TV signal.

    These methods are a comprehensive guide for those interested in how to set up digital TV on an LG TV.

    Automatic search

    To install free satellite TV on an LG set-top box, you will need:

    • Connect the tuner to the screen via HDMI. If the receiver is built-in, the cord is connected to the corresponding connector on the panel.
    • Go to the “Menu”.
    • We go to the “Channels” and select the type of signal. “Satellite”.
    • Click “Satellite Settings”, check the parameters and click “OK”.
    • Go to “Autosearch” and run it.
    • We get installed satellite TV.

    Note! To watch paid channels, you will need to insert a CI or CI card into the TV adapter

    The listed methods help 90% of users to independently cope with setting up LG set-top boxes. If the installation failed, then you need to check the correct connection of all elements.

    How to tune channels on LG TV with antenna and cable connection

    After the law on the transition to digital television was approved, many companies began to sell the digital TV connection service. But if you follow certain rules of the instructions, you can set up TV yourself, without the help of intermediaries. Below is the answer to the question. how to tune digital channels on your LG TV.

    The first way

    There are several methods on how to set up your LG TV. There are two main ways. To perform quick setup on your LG TV, follow these steps:

    • Open the official website of a TV company that acts as a provider.
    • Find a subsection on the site that is needed to tune channels on LG TV.
    • Go to the “Main menu”, click on the “Channels” section.
    • Select cable TV mode. It is worth pointing out that modern models do not always have such a mode.
    • Open the section “Manual tuning” or “Auto search” on TV “LG”.
    • In the window that opens, enter the parameters specified on the portal of the television company.
    • Launch “Search” by first connecting the antenna or cable from the provider.

    After this step, the digital TV connection is complete. You can watch free TV programs without a set-top box, which are available in your area.

    If the automatic search did not find all the channels, then most likely the weak TV signal is to blame. You can check it by pressing “Info” on the remote control. A window will appear where the signal quality will be indicated. If it is less than 50%, then manual tuning or signal amplifier should be used.

    Second way

    You can connect your cable TV to receive a signal in a different way by performing the following manual steps:

    • Click on the “Home” remote control and go to “Settings”. if you intend to set the necessary parameters for “TV LG Smart TV” from the antenna. As for older models, then you need to go to the “Menu”.
    • Open the tab with options, and select the one you need in the list of countries. When the TV is released in 2010, you can choose Russia. In the case of newer models, Germany can be supplied.
    • Select Russian in the appropriate section with a list of available languages ​​(if not selected).
    • Go to “Settings” and click on “Autosearch” TV channels on the TV screen.
    • Select “Cable”. If not, then you need to change the country. Then change the language again. If the operation fails, then the TV does not have a tuner.

    If the procedure ended successfully, then you managed to get one step closer to installing 20 free channels on digital TV and remove analog channels. On older models, there are a few more steps to follow:

    • Set “Autosearch” by entering modulation. 256, speed. 6750, initial frequency. 274 thousand, and final frequency. 770 thousand.
    • Next, click on the checkboxes for obtaining sections with additional information.
    • Start search. Wait 20 minutes for the channels to appear on the screen in the standard order. If after this time an error occurs, the procedure must be repeated.

    Finally, it is worth pointing out that almost all LG TV models have an automatic system update function. If you do not want to constantly reconfigure the television signal after an automatic reset of the settings, you should disable this function. To do this, in the settings mode, go to the section with the cable settings and turn off the automatic update. All actions performed must be saved.

    How to set up digital television on your TV

    The advent of digital television caused a kind of excitement, as digital content became available to a wide range of users. Recently, it is this direction of television that has been developing very actively, a large number of offices have appeared that will provide services for connecting and setting up digital television for a fee. The good news is that you can set up digital television on your TV yourself.

    So in this article we will take a closer look at all aspects of the setup, both in general and for TVs from specific manufacturers. It is worth noting that there are different types of digital television. All proposed schemes relate to the cable “digit”.

    First, consider the general scheme for setting up digital television reception. Depending on the TV model, the sequence of operations and item names may differ slightly. Do not worry, further we will consider the features of customization for specific brands, all points will be illustrated.

    READ  How to connect video to LG TV

    Use the remote to enter the menu of your TV. In the window that appears, select the “Options” item. In order to go directly to the setting, you must select the “Auto-tuning” item. A window should appear on the screen prompting you to select one of the signal sources: cable or antenna. We choose the first option, then press the “Start” button.

    After the operations carried out, a window should appear in which you must select the “Digital” item as the signal source, and then press the “Start” button again.

    We are in the final stages of setting up digital television. In the window that appears, we find the item “Search mode”, several options will appear, we need the item “Full”. Click and fill in all the fields with the data indicated below.

    For Honor, some TVs support network search. This means that you do not need to manually specify the above parameters. Just after choosing the required search mode, press the “Search” button. As you can see, setting up digital television on your TV is quite simple. For those who are confused, read further illustrated instructions.

    Setting up digital TV on LG TVs

    It is logical to assume that different models of TVs from the LG manufacturer use their own firmware and their own menus. However, in general, the menus of all TVs have characteristic similarities. Find the “Menu” button on the remote control, press it and a window appears on the screen in which you need to select the “Options” item.

    In the “Options” tab you will see several parameters available for change. In the item “Country” you need to indicate either Germany or Finland.

    After that, you need to go to the “Settings” menu, there select the “Autosearch” item in which specify “Cable” as the connection method.

    After the done manipulations, a window should open in which you need to select the “Settings” item and specify all the values ​​as in the figure below.

    If you followed all the instructions correctly, then after the search, the TV will find all available channels, as well as radio stations.

    Please note that LG TVs use the automatic channel update function, which resets the existing channel list at regular intervals and starts a new search. For convenience, it is advisable to disable this function. To do this, go to the “Digital cable settings” tab and turn off automatic updates. Thus, it is quite easy to set up digital TV on LG TVs. It is enough to show a little care.

    Setting up digital television on Philips TVs

    So, find the “Menu” button on the remote control and use it to enter the menu of your TV. Next, you need to go to the “Configuration” section.

    In the window that appears, click on the “Installation” item, after that a secondary menu will appear on the TV screen, in which you need to select the “Channel setup” section. Another submenu will appear, in which we select the item “Automatic. Installations “. If you have completed all the transitions correctly, a message should appear that warns about the upcoming update of the list of all channels. Click “Start”.

    Next, select the item “Reinstall channels”.

    Go to the “Country” section and select either Finland or Germany from the list.

    Select “Cable” as the connection method.

    Before starting the process of searching for channels, go to the “Settings” item and make the settings according to the images below.

    You have now managed to set up digital TV on your Philips TV. You can start a direct search for channels, for this click “Start”.

    Setting up digital television on Samsung TVs

    Press the “Menu” button on the remote control. The menu of your TV should appear on the screen. We go to the “Channel” section (depicted as a satellite dish). Several tabs will appear on the right, select the “Antenna” item and select “Cable” as the connection type. Next, you need to go to the “Country” tab and specify the “Other” parameter. In this case, the TV must ask for a pin code. If you have not changed it yourself, then enter 0000 (default value).

    Set all the parameters as in the image below, then click “Search”.

    After all operations, your TV will detect all available channels.

    Setting up digital television on Toshiba TVs

    Use the “Menu” button to enter the TV menu and select the Russian menu language.

    Manually enter all parameters as in the image below.

    After that, click “OK”, the search for channels will start.

    How to do Auto or Manual Tuning for TV and DTV Channels on LG Smart WebOS TV

    We have analyzed in detail a diagram of how to properly set up digital television on a TV. We backed up all the sequences with images for better perception. If you have any questions, use the feedback form on our website or ask a question in the comments.

    How to set up digital television on your TV

    The advent of digital television caused a kind of excitement, as digital content became available to a wide range of users. Recently, it is this direction of television that has been developing very actively, a large number of offices have appeared that will provide services for connecting and setting up digital television for a fee. The good news is that you can set up digital television on your TV yourself.

    So in this article we will take a closer look at all aspects of the setup, both in general and for TVs from specific manufacturers. It is worth noting that there are different types of digital television. All proposed schemes relate to the cable “digit”.

    First, consider the general scheme for setting up digital television reception. Depending on the TV model, the sequence of operations and item names may differ slightly. Do not worry, further we will consider the features of customization for specific brands, all points will be illustrated.

    Use the remote to enter the menu of your TV. In the window that appears, select the “Options” item. In order to go directly to the setting, you must select the “Auto-tuning” item. A window should appear on the screen prompting you to select one of the signal sources: cable or antenna. We choose the first option, then press the “Start” button.

    After the operations carried out, a window should appear in which you must select the “Digital” item as the signal source, and then press the “Start” button again.

    We are in the final stages of setting up digital television. In the window that appears, we find the item “Search mode”, several options will appear, we need the item “Full”. Click and fill in all the fields with the data indicated below.

    For Honor, some TVs support network search. This means that you do not need to manually specify the above parameters. Just after choosing the required search mode, press the “Search” button. As you can see, setting up digital television on your TV is quite simple. For those who are confused, read further illustrated instructions.

    Setting up digital TV on LG TVs

    It is logical to assume that various models of TVs from the manufacturer LG use their own firmware and their own menus. However, in general, the menus of all TVs have characteristic similarities. Find the “Menu” button on the remote control, press it and a window appears on the screen in which you need to select the “Options” item.

    In the “Options” tab you will see several parameters available for change. In the item “Country” you need to indicate either Germany or Finland.

    After that, you need to go to the “Settings” menu, there select the “Autosearch” item in which specify “Cable” as the connection method.

    After the done manipulations, a window should open in which you need to select the “Settings” item and specify all the values ​​as in the figure below.

    If you followed all the instructions correctly, then after the search, the TV will find all available channels, as well as radio stations.

    Please note that LG TVs use the automatic channel update function, which resets the existing channel list at regular intervals and starts a new search. For convenience, it is desirable to disable this function. To do this, go to the “Digital cable settings” tab and turn off automatic updates. Thus, it is quite easy to set up digital TV on LG TVs. It is enough to show a little care.

    Setting up digital television on Philips TVs

    So, find the “Menu” button on the remote control and use it to enter the menu of your TV. Next, you need to go to the “Configuration” section.

    In the window that appears, click on the “Installation” item, after that a secondary menu will appear on the TV screen, in which you must select the “Channel setup” section. Another submenu will appear, in which we select the item “Automatic. Installations “. If you have completed all the transitions correctly, a message should appear that warns about the upcoming update of the list of all channels. Click “Start”.

    Next, select the item “Reinstall channels”.

    Go to the “Country” section and select either Finland or Germany from the list.

    Select “Cable” as the connection method.

    Before starting the process of searching for channels, go to the “Settings” item and make the settings according to the images below.

    You have now managed to set up digital TV on your Philips TV. You can start a direct search for channels, for this click “Start”.

    Setting up digital television on Samsung TVs

    Press the “Menu” button on the remote control. The menu of your TV should appear on the screen. We go to the “Channel” section (depicted as a satellite dish). Several tabs will appear on the right, select the “Antenna” item and select “Cable” as the connection type. Next, you need to go to the “Country” tab and specify the “Other” parameter. In this case, the TV must ask for a pin code. If you did not change it yourself, then enter 0000 (default value).

    Go to the “Auto-tuning” tab, select “Cable” as the signal source.

    Set all the parameters as in the image below, then click “Search”.

    After all operations, your TV will find all available channels.

    Setting up digital television on Toshiba TVs

    Use the “Menu” button to enter the TV menu and select the Russian menu language.

    READ  How To Tune 20 Channels On A TV

    Manually enter all parameters as in the image below.

    After that, click “OK”, the search for channels will start.

    We have analyzed in detail a diagram of how to properly set up digital television on a TV. We backed up all the sequences with images for better perception. If you have any questions, use the feedback form on our website or ask a question in the comments.

    H, F, E and J Series

    For models of this series, the setup process will look slightly different:

    • Turn on the TV and use the “Source” button on the remote to select “TV”.
    • Open the menu (by the button of the same name or “Keypad” and by selecting the “Menu” item on the screen).
    • Select “Broadcast” and then “Auto Tuning”.
    • Activate auto-tuning again.
    • In the warning message about changing the settings, click the “Start” button.
    • Select the source from which the signal will come: “Antenna” if you are configuring the reception of free broadcasting of the DVB-T2 standard, or “Cable” if you are connecting cable TV.
    • Specify the type of channels. It is better to select “Digital and Analogue” here, so as not to repeat later a separate setting for the analogue programs remaining on the air.
    • Select the scan type. To catch as many channels as possible, select the “Full” option.
    • The “Scan” button is pressed.
    • After the end of the process, click the “Close” button and exit the menu.

    How to set up “digital” on an old Samsung that does not support digital TV

    If it turns out that the TV set is not capable of receiving the current broadcasting standard or is not equipped with a digital tuner at all, the user can do the following:

    • Purchase a new TV. Not the most affordable option.
    • Connect a digital set-top box receiver. If you just need to watch programs, then this option will cost several times cheaper than buying a second TV.

    A separate difficulty can be associated with the use of the receiver: it does not catch analog TV signals. If you want to watch both local and federal programs, take care of not only the correct antenna type, but also an antenna splitter splitter for the antenna cable. It is needed so that the signal goes to both the receiver and the antenna socket of the TV at the same time. Then the transition between different types of broadcasting will be carried out as follows:

    • digital channel required. TV switches to AV mode;
    • analog is needed. switching is made to TV mode.

    Set up digital TV channels on your Samsung TV

    Samsung is one of the most trusted brands in the digital TV market. The most difficult task that you most likely faced yourself is setting up channels. Despite the intuitive interface, it is far from immediately possible to master the search principle on your own. Therefore, we wrote this article, in which we told as much as possible how to set up digital television on Samsung.

    Removing unnecessary channels and adjusting the order

    To delete unneeded channels, proceed as follows:

    • Open the menu, go to the settings section and select “Broadcast”.
    • Go to “Change channels”.
    • Using the “Enter” button, tick the boxes that should be deleted.
    • In the side menu, select the “Delete” item.
    • Press the “Yes” button to confirm and switch the TV to normal mode. Immediately after that, you can make sure that unnecessary channels are gone.

    If we are talking about Samsung Smart TV, then removal is easier there:

    • Using the “Smart Hub” button, you need to go to the system hub.
    • In the form with the listed channels, you need to select the editing section (usually it is on the right in the upper part of the table).
    • Guided by the prompts of the system at each step, you can select all unnecessary TV channels and delete them.

    As for the order of the channels, the TV arranges them in two ways:

    • independently in the order in which I could find them during autotuning;
    • using the list sent by the operator (as, for example, when connecting to NTV channels).

    In the second case, sorting is impossible: you cannot reconfigure what the operator has set, you can only delete unnecessary channels. In the first, the sort looks like this:

    • Go to the menu, select “Settings”.
    • Click on “Broadcast” and enter the “Advanced Settings” tab.
    • Select “Change. channel number ”and indicate“ Enable ”if the item is highlighted. If it is inactive, then go to the next step.
    • Select “Change channel number” or go to the “Live broadcast” section (depending on the interface option).
    • Here you need to open the “Channel List” tab and go to the “Channel Change” item.
    • The desired TV channel is selected using the “Enter” button on the remote control, next to it the checkmark icon lights up.
    • The item “Change number” is selected and using the arrow keys on the remote control the channel is dragged to a new place.
    • Pressing “Enter” again removes the check mark, the result is fixed.

    If necessary, the procedure is repeated the required number of times.

    When sorting channels on Samsung TVs, one of their peculiarities should be taken into account: if the digital ones in the general list are signed and have names, then the analog ones are only serial numbers. Accordingly, when sorting, the picture will be as follows:

    • Digital channels will move in the list, and one of them will take the position of the other.
    • The list of analogue programs will not change, only another program will be received under the old number.

    Checking if your Samsung TV supports digital TV

    Before starting to search for channels directly, let’s make sure that the TV set is generally capable of catching a “digital”. Samsung’s lineup includes many series and even more. individual models. Not all of them have a built-in digital tuner, and some, although they are equipped with it, are made for the old DVB-T standard, and not DVB-T2, which is now used in Russia.

    To do this, enter the model number in the “Search” line. If you find one, you can proceed to setting.

    Model Diagonal Support DVB-T2
    19H4000 19
    LT19C350EX 19
    LT22C350EX 22
    LT23C370EX 23
    LT24C370EX 24
    LT27C370EX 27
    PE43H4000 43
    PS43E497B2 43
    PS43F4900AK 43
    PS51E497B2KXRU 51
    PS51E537A3 51
    PS51E557D1 51
    PS51E6507 51
    PS51E8007G 51
    PS51F4900AK 51
    PS51F5500AK 51
    PS51F8500AT 51
    PS60F5000AK 60
    PS64D8000 64
    PS64E8007 64
    PS64F8500AT 64
    T24D310EX 24
    T24D390EX 24
    T24D391EX 24
    T24D590EX 24
    T27D390EX 27
    T27D590EX 27
    T28D310EX 27
    UE22F5000AK 22
    UE22F5400AK 22
    UE22F5410AK 22
    UE22H5020 22
    UE22H5600 22
    UE22H5610 22
    UE24H4070 24
    UE24H4080 24
    UE28H4000 28
    UE32EH5007 32
    UE32EH5047 32
    UE32EH5057 32
    UE32EH5307 32
    UE32ES5507 32
    UE32ES5537 32
    UE32ES5557 32
    UE32F4500AK 32
    UE32F4510AK 32
    UE32F5000AK 32
    UE32F5020AK 32
    UE32F5300AK 32
    UE32F5500AK 32
    UE32F6100AK 32
    UE32F6200AK 32
    UE32F6330AK 32
    UE32F6400AK 32
    UE32F6510AB 32
    UE32F6540AB 32
    UE32F6800AB 32
    UE32H4000 32
    UE32H4270 32
    UE32H4500 32
    UE32H4510 32
    UE32H5303 32
    UE32H5500 32
    UE32H6230 32
    UE32H6350 32
    UE32H6410 32
    UE37ES6710 37
    UE39F5000AK 39
    UE39F5020AK 39
    UE39F5300AK 39
    UE39F5500AK 39
    UE40EH5007 40
    UE40EH5047 40
    UE40EH5057 40
    UE40EH5307 40
    UE40ES5507 40
    UE40ES6307 40
    UE40ES6547 40
    UE40ES6557 40
    UE40ES6857 40
    UE40ES6907 40
    UE40ES7207 40
    UE40ES7507 40
    UE40ES8007 40
    UE40F5000 40
    UE40F6100AK 40
    UE40F6130 40
    UE40F6200AK 40
    UE40F6330AK 40
    UE40F6400 40
    UE40F6500AB 40
    UE40F6510AB 40
    UE40F6540AB 40
    UE40F6650AB 40
    UE40F6800AB 40
    UE40F7000AT 40
    UE40F8000AT 40
    UE40FH5007K 40
    UE40H4200 40
    UE40H4203 40
    UE40H5003 40
    UE40H5020 40
    UE40H5203 40
    UE40H5270 40
    UE40H5500 40
    UE40H6230 40
    UE40H6240 40
    UE40H6350 40
    UE40H6410 40
    UE40H6500 40
    UE40H6650 40
    UE40HU7000 40
    UE42F5000AK 42
    UE42F5020AK 42
    UE42F5300AK 42
    UE42F5500AK 42
    UE46EH5007 46
    UE46EH5047 46
    UE46EH5057 46
    UE46EH5307 46
    UE46EH6037 46
    UE46ES5507 46
    UE46ES5537 46
    UE46ES5557 46
    UE46ES6307 46
    UE46ES6547 46
    UE46ES6857 46
    UE46ES6907 46
    UE46ES7207 46
    UE46ES7500 46
    UE46ES7507 46
    UE46ES8000 46
    UE46ES8007 46
    UE46F5000AK 46
    UE46F5020AK 46
    UE46F5300AK 46
    UE46F5500AK 46
    UE46F6100AK 46
    UE46F6330AK 46
    UE46F6400AK 46
    UE46F6500AB 46
    UE46F6510AB 46
    UE46F6540AB 46
    UE46F6650AB 46
    UE46F6800AB 46
    UE46F7000AT 46
    UE46F8000AT 46
    UE46F8500AT 46
    UE48H4200 48
    UE48H4203 48
    UE48H5003 48
    UE48H5020 48
    UE48H5203 48
    UE48H5270 48
    UE48H5500 48
    UE48H5510 48
    UE48H6230 48
    UE48H6350 48
    UE48H6410 48
    UE48H6500 48
    UE48H6650 48
    UE48H6800 48
    UE48HU8500 48
    UE50ES5507 fifty
    UE50ES6907 fifty
    UE50F5000AK fifty
    UE50F5020AK fifty
    UE50F5500AK fifty
    UE50F6100AK fifty
    UE50F6130 fifty
    UE50F6330AK fifty
    UE50F6330AK fifty
    UE50F6400AK fifty
    UE50F6500 fifty
    UE50F6650 fifty
    UE50F6800AB fifty
    UE50HU7000 fifty
    UE55ES6307 55
    UE55ES6547UXRU 55
    UE55ES6557UXRU 55
    UE55ES6857 55
    UE55ES6907UXRU 55
    UE55ES7507 55
    UE55ES8007 55
    UE55F6100AK 55
    UE55F6400AK 55
    UE55F6800AB 55
    UE55F7000AT 55
    UE55F8000AT 55
    UE55F8500AT 55
    UE55H680 55
    UE55H6500 55
    UE55H6650 55
    UE55HU7000T 55
    UE55HU7500T 55
    UE55HU8700T 55
    UE55HU9000T 55
    UE60F6100AK 60
    UE60F7000AT 60
    UE65ES8007 65
    UE65F6400AK 65
    UE65F8000AT 65
    UE65F90800 65
    UE65HU7500T 65
    UE65HU8700T 65
    UE65HU9000T 65
    UE75ES9000 75
    UE75ES9007 75
    UE75F6300 75
    UE75F6400AK 75
    UE75F8200 75
    UE75HU7500T 75
    UE78HU9000 78
    UE85S9AT 85
    UE105S9 105

    Auto Tuning Digital Channels on Samsung

    The easiest way to set up your antenna connection yourself is to run an automatic search. Let’s consider step by step how to organize the reception of digital TV channels for models of different series and model years.

    Manual channel search

    Older Samsung models do not support auto-tuning. In them, digital channels must be tuned manually, and for cable or satellite television, also by specifying the frequency and other key parameters. In general, a manual search would look like this:

    • The menu opens.
    • The item “Broadcast” is selected.
    • Signal source (cable, antenna or satellite) is indicated.
    • If the item “Country” appears in the menu, you must specify “Russia”.
    • The item “Manual setting” is selected.
    • The item “Setting up digital channels” is selected, where you need to click the “Create” button. In this case, additional TV channels will be added to the existing ones, and will not replace them.
    • A tab with parameters will open. Here you need to specify the broadcast frequency, module and transmission rate. This information should be obtained from the operator providing access to the cable or satellite signal. For terrestrial TV, indicate the broadcasting frequencies of the multiplexes.
    • After pressing the “OK” button, the TV will start searching for the specified parameters. After a while, a list of found channels will appear on the screen. You need to save them. and everything is ready to start viewing.

    Adding local analogue channels

    If from the very beginning during auto-tuning it was indicated that both digital and analogue broadcasting was being searched, then nothing needs to be added, all TV channels have already been found. You also need to remember that some modern TV models no longer support manual tuning of terrestrial channels, they need to re-scan the entire range in auto-tuning mode.

    • Turn on the menu, open the “Broadcast” tab.
    • Select signal source. In our case, this is an antenna.
    • Go to Manual Configuration Mode.
    • Specify search for analogue channels only.
    • Select “Create”.
    • Searching for analogue broadcasting channels will take a few minutes.
    READ  No Signal On TV Digital TV

    Setting up your LG TV for the first time

    Presetting your LG TV is necessary to coordinate the user, register the device on the network and access the current list of TV programs.

    How to set up a TV with Smart TV

    The presence of Smart TV on board opens access to the Internet via Wi-Fi or Ethernet cable and downloads applications for viewing IPTV, with which you can turn on 4K broadcasting. For this:

    Note! Free Playlists are a custom build of publicly available channels. After a week, month, six months, channels may disappear from the list of available ones, and the list will stop working.

    How to set up cable

    Finding cable channels is the simplest:

    • Connect antenna.
    • Go to “Settings”. “Channels”.
    • In the list of signals, select “Antenna” and start the search.

    The TV will automatically search for digital and analogue broadcasts.

    Manually

    The principle of connecting a satellite dish differs from the number of satellites available for processing. An approximate connection sequence looks like this:

    • Insert the antenna cable into the socket on the TV.
    • Go to “Settings” and go to “Channels”.
    • Select “Manual tuning” and in the list of signals that opens, select “Satellite”.
    • Install “EUTELSAT 36 A / B 36.0 E” and tap on the remote control on “OK”.
    • Specify the frequency 2-LNB 9750/10600 and 1-range 10750 and start the search.

    Important! To fine tune the satellite, contact your service provider who should specify the frequencies covered by the antenna heads.

    Choice of country of residence

    If the TV has not yet been connected to the Internet, the wrong region will be set on it, which contributes to problems when searching for digital broadcasting. To change the region of residence:

    • Press “Home” on the remote control.
    • Go to “Settings”.
    • Expand the “” additional menu. three vertical dots.
    • Go to “General”.
    • Open “Country” and select the region of residence.
    • Restart your TV (turn off and on).

    Change of time and date

    To avoid software glitches or authorization errors on individual resources, it is recommended to set the correct time:

    • Click on “Home” again.
    • Open “Settings” and select “”.
    • Go to the “General” tab.
    • Go to “Time and date”, change their settings.

    In this tab, they also activate the on / off TV on schedule and set the sleep timer.

    Automatically

    Autosearch does not require the user to enter data to search for multiplexes. it checks all possible frequencies from the specified region and adds both digital and analog TV channels to the list. To initiate an automatic check:

    • Open the system menu and select “Settings”.
    • Visit the “Channels” tab.
    • Select “Automatic search” and check the box next to the search for digital broadcasts. Leave a checkmark next to the addition of analogue TV channels (the quality of the channels is worse).
    • Tap “Start Search”.

    This method takes longer due to frequency coverage to search, but finds fewer TV broadcasts or adds an encrypted signal. When the process is complete, the user will be able to reorder the TV channel list manually.

    Setting up digital channels on LG TVs

    Digital TV is very popular among the residents of Russia. Free channels are available to many people around the country. In addition, you are protected from interference that can occur with conventional terrestrial television, since the digital signal does not depend on any external factors, including the weather.

    After the advent of DTV, companies began to form that are ready to set up a TV for a certain amount of money. But the fact is that you do not need to contact their services, since if you follow the instructions, you can set up digital and terrestrial channels yourself.

    In order to watch free TV channels, the TV must have a built-in tuner. TVs of the LV company, both new and old, mainly support these parameters, so it will not be difficult to configure them. However, if you are not sure about the capabilities of your own TV, then you need to open the characteristics and find such parameters as DVB-C or DVB-T2.

    There are 2 ways to tune digital channels on LG TVs: fast and long. In this article, we will cover both methods.

    Quick setup for LG TVs

    After the data is found, you can watch all the free channels that are available in your area.

    Long way

    • initial frequency. 274,000;
    • final frequency. 770,000;
    • modulation. 256;
    • speed. 6750;
    • Network ID. Auto.

    Some data will not need to be driven. It depends on which country you have chosen.

  • The TV may then ask you for more information. If you agree, check the box.
  • Digital only. will only search for DTV channels. Otherwise, theirs are ethereal;
  • Auto numbering. will automatically order the items found;
  • Skip encrypted programs. won’t tune paid channels.
  • Run a search. After a while, the available TV and radio channels will be displayed. It usually takes 15-20 minutes.
  • Almost all LG TVs have an auto-update function. If you do not want to constantly reconfigure your TV after it automatically resets everything, disable this feature. To do this, you will need:

    • Go to settings;
    • Go down to the “Digital cable settings”;
    • Turn off auto-update.

    How to set up digital television on a TV. general provisions

    Mostly all methods of how to set up digital television reception use approximately the same scheme, but due to the variety of manufacturers, the actions may differ slightly, but their logic is similar. In order not to get confused in all the sequences, it is worth applying the algorithm directly to each TV model. Thanks to logic and intuition, you can correctly set up on almost every TV model using the instructions provided.

    • Take the remote control and expand the menu;
    • Go to the “Options” item;
    • Next, you need to activate “Auto-tuning”. With this action, a window appears, which contains information about the signal sources, it can be a cable or antenna signal. In our case, you need to choose a cable;
    • At the end of the operation, information about the quality of signal reception should appear in a new window, here you should select “Digital“, then click “Start”;
    • End point of customization. “Search mode” and select the way to find channels. The proposed fields must be filled in with information. Frequency. 314 MHz, speed. 6875 kS / s, and modulation. 256 QAM.

    advanced TV models allow you to perform a network search, which will perform all the necessary actions on its own. When the required method of detecting TV channels is selected, you need to click on “Search”.

    How to set up digital TV on Samsung

    Now let’s look at a way how to set up digital TV channels on Samsung, because the manufacturer is one of the most popular in the field. Actions are similar:

    • Click on the Menu on the remote control;
    • Then go to the “Channel” category (on the satellite dish icon);
    • On the right you need to select the “Antenna” option, and in the type field. “Cable”;
    • Now in the “Country” section you need to set “Other”, now you need to enter the pin code, by default 0000;
    • Go to the “Auto-tuning” menu and indicate the signal source. “Cable”;
    • You need to specify the parameters, they correspond to the data in the first, general example of the article, and click “Search”;
    • Now the TV will find all TV channels.

    How to set up digital TV on LG

    If this instruction is not effective, it is worth applying the detailed algorithm for LG TVs. The technique is relevant for almost all models of the manufacturer.

    • From the remote control go to the Menu;
    • Click on “Options”;
    • In the Country category, change the flag to Finland or Sweden;
    • Then go to the “Settings” category and start “Autosearch”;
    • In the fields you need to enter the search method, usually of a fairly fast type, frequency. 298 MHz modulation. 256 QAM, characters. 6952, ID. auto;
    • If everything is done correctly, then a number of TV channels will be displayed during the search;
    • LG is integrating an automatic TV channel search and update system into the system. This feature can be inconvenient as the prepared list will be flushed regularly. To prevent the phenomenon, be sure to follow the settings for cable connection and turn off “Channel auto-update”;
    • For convenient sorting, you need to uncheck the auto-numbering box in the “Cable” section in “Autosearch”.

    Detailed instructions for setting up digital television

    With the widespread use of modern television, there has been a stir, and, accordingly, there are many questions about how to set up digital television. The reason for the popularity is in the variety of channels in terms of direction, quality, language, type of content, etc. Due to the lack of information on setting up digital TV, companies have appeared like mushrooms after rain, which charge a fee for these manipulations. Pay is not at all necessary, it is really possible to achieve the goal on your own.

    How to set up digital TV on Smart TV

    Digital TV how to set up channels on a TV with Smart function, consider the example of Samsung. The action is performed in a fairly standard way, but there are some differences.

    • Click on “Country”, you may now need to enter a pin code, by default 0000, 1111 or 1234;
    • Follow the “Other” section;
    • Then, with a step back, make a choice on “Cable search parameters”;
    • The standard parameters are now being introduced;
    • Again you need to go to “Auto-tuning”, here select the source mode “Cable”;
    • You need to activate the “Digital” section;
    • Using the search mode, select “Network” and activate the setting.

    All methods allow you to create a high-quality connection to digital TV channels and find the maximum available number of interesting programs. Despite the lack of data on devices from Toshiba, Philips and others, the connection method is no different.