How to tune channels on TV dexp h32d7300k

How to find out the possibility of receiving a digit

If it doesn’t work, ask in the comments. I will try to help and suggest. Even if you have an old model, a digital set-top box will solve all problems.

Manual Channel Search on DEXP TV

If during the automatic search you could not find the desired 20 channels, you will have to search manually. I will tell you a sequence of actions from 3 steps.

  • We find out the frequency of receiving channels on the interactive map of TsETV. Namely, РТРС1 and РТРС2.
  • Press the menu and select “Manual DTV Search”
  • We indicate the channel number (you found it earlier on the CETV map). Presses start. We do this for both parameters of the multiplexes.

tune, channels, dexp, h32d7300k

Watch the video as I tune and repeat:

Checking DVB-T2 on DEXP TV

Before reading on, you need to make sure your TV is digital TV capable. If the broadcasting standard is DVB-T2, then everything is fine and read on.

A situation may arise that you have DVB-T. This is an old broadcasting standard and since 2012 it has been impossible to catch digital TV channels from such a TV.

Step 1

We connect the TV to the antenna. There is a special antenna input on the back of the device. RSA, in the picture are needed for old models (if necessary, connect a prefix). If you have a new model, you only need an antenna.

Ohdpluginlibrary application error

Updates installed incorrectly or software crash on the TV.

  • Factory reset
  • Install the latest software version

Through cable

Connecting the TV to a WI-FI router via a cable is as follows:

  • Connect the devices with a cable that goes into the LAN port;
  • Start TV and open “Settings”;
  • Click on the line “Network”;
  • Click on the “Configure” icon;
  • Click on “List”, select the “Wired / Cable” option;
  • Select “Update / Connect”. That’s all!

So, with how to connect a TV to the Internet via a WI-FI router with a cable, we figured out!

The next part of the review is devoted to the scheme for connecting the router to the TV. Please note: the special connection cable must be purchased separately.

The algorithm of actions is as follows:

  • Connect both LAN ports to each other;
  • Turn on the TV and open the control menu;
  • Find the icon “Network”. “Wired”. “Settings”;
  • Select automatic IP configuration;
  • Click on “OK” and wait for the installation to finish.

Is it possible to connect an old TV?

[advice] Want to know if you can connect your old TV to the Internet via a WI-FI router? In fact, the only way to upgrade your equipment and get access to the World Wide Web on your screen is to buy a special Smart Box. [/ Advice]

Finally, we will consider possible difficulties. you can fix problems with the WI-FI network as follows:

  • Enter the “Network” item;
  • Go to the “Status” block;
  • Select “IP settings. register manually”;
  • Enter the IP address, as well as DNS and subnet mask. this must be done manually.

You can find the necessary data for the Internet WI-FI here:

  • Open the “Start” menu, then. “Settings”;
  • Select “Network and Internet”, then. “Control Center”;
  • Click on your connection and click “Details”.

We told how to connect a TV to the Internet via a Rostelecom WI-FI router or any other brand of equipment. Choose the appropriate instruction and act!

How to connect a TV to the Internet via a router: 7 comments

How to connect a simple TV to the Internet via a WI-FI router, is it possible?

So, your mother, someone will write how to connect an old TV via WI-FI, or just chatter about this? We need this, we need this. Can you explain point by point? Or don’t you know a damn thing? The entire Internet is crammed with instructions for Smart-TV. But this is already a fool, but what about old TVs? Old people cannot pay providers for each set-top box to TVs for them, the Internet is already expensive, and they are also not interested in watching one channel in different rooms. Where is the solution? How to watch different TV channels. What set-top boxes, converters and TV boxes are needed, what else is there, damn it. You can describe it normally, smart guys?

Eugene, firstly, all consoles are different and in different price categories. Therefore, it is simply physically impossible to describe in the article for all occasions. Secondly, it is not clear from your message. You just need to connect an old TV to the Internet or you need to connect several TVs to the network in order to show more than one channel?

How to connect HISENSE to a Wi-Fi router.

good day!
Can’t connect internet to TV
Error:. Log in to the network. using the account provided by the service provider

Good day. I purchased a Smart TV and connected it to the Internet via a router. The provider provides the ability to watch TV programs on my connection. But how to set up Smart TV in the future to start watching is not particularly clear to me. Probably, this requires some other software or something like that, where can I get it and how to install it? I would be grateful for any hint. thank.

We invite you to find out how to connect your TV to the Internet via a WI-FI router. after all, in this article we have described all the available methods. Let’s talk about individual modern models and tell you what to do for owners of old technology. So, How To Quickly Access The Internet On Your Big Screen TV?

Before connecting, make sure that your DEXP Smart TV has the ability to access the Internet, this information can be viewed in the TV passport.

To connect the Internet to your TV DEXP, choose the convenient Wired and Wireless connection option using Wi-Fi technology. You must have a high-speed Internet, otherwise the video you are watching will constantly freeze.

When connecting via the Internet, a cable must be connected from the router to the LAN connector on the back of the TV.

Press the Menu button and select the desired Settings section.
Select the item Network.
Next, go to the network configuration and do a few actions.

Choosing the type of connection ethernet or wireless, we choose the option we need. If you chose wired, the TV will automatically connect to your network.

When you select Wireless, you will need to find your network from the list of found Wi-Fi and enter the password from your router to connect.

If you did everything correctly, you can immediately access the Internet from your Smart.

Through a router

The previous instruction is only suitable for devices with a built-in module. But what if you need to connect a TV without WI-FI to the Internet via a WI-FI router? Read below:

  • Place the device into a USB slot;
  • Go to the wireless settings again (as described above);
  • Find the connection you need;
  • Select “Configure from the list of access points (AP)” if you know the login and password from the house. networks;
  • Click on “Easy installation (WPS button mode)” if the device supports automatic Wi-Fi connection;
  • Click on “Configure (Ad hoc)” if you need a local connection.

Great, here we are with you and figured out how a router for digital television works! It’s time to move on to the next part of the review dedicated to Smart TV.

How to connect Smart TV?

Now we will tell you how to connect Smart TV to the Internet via a WI-FI router without a wire. in this case, it is very important to set some fine settings. Let’s take a look at the main brands of equipment.

To use all the available functions, do the following:

  • Turn on the device;
  • Click on the “Main Menu” button;
  • Select “Registration” or log in to the system;
  • Confirm registration via email;
  • Return to the menu and sign in to your account.
  • Click on the Hub. the central colored button on the remote control;
  • Launch any application from the screen;
  • Done.
  • Press the button named HOME on your remote;
  • Go to the installation menu. upper right corner;
  • Click on the line “Network”, and then “Update Internet Content”;
  • A connection to the server will start to configure unavailable services;
  • After the end of the configuration, a notification will appear about the return to the menu. refuse the offer and click on the “SEN” icon.

We hope that now the question of “what is it. a router for a TV and how to use it” will not bother you any more, because we have tried to explain the whole process in detail. Next, we will touch on the older models, the information will be useful to those who have not yet had time to acquire a “smart TV”.

Is it possible to connect an old TV?

[advice] Want to know if you can connect your old TV to the Internet via a WI-FI router? In fact, the only way to upgrade your equipment and get access to the World Wide Web on your screen is to buy a special Smart Box. [/ Advice]

Finally, we will consider possible difficulties. you can fix problems with the WI-FI network as follows:

  • Enter the “Network” item;
  • Go to the “Status” block;
  • Select “IP settings. register manually”;
  • Specify the IP address, as well as DNS and subnet mask. this must be done manually.

You can find the necessary data for the Internet WI-FI here:

  • Open the “Start” menu, then. “Settings”;
  • Select “Network and Internet”, then. “Control Center”;
  • Click on your connection and click “Details”.

We told how to connect a TV to the Internet via a Rostelecom WI-FI router or any other brand of equipment. Choose the appropriate instruction and act!

How to connect Smart TV?

Now we will tell you how to connect Smart TV to the Internet via a WI-FI router without a wire. in this case, it is very important to set some fine settings. Let’s take a look at the main brands of equipment.

To use all the available functions, do the following:

  • Turn on the device;
  • Click on the “Main Menu” button;
  • Select “Registration” or log in to the system;
  • Confirm registration via email;
  • Return to the menu and sign in to your account.
  • Click on the Hub. the central colored button on the remote control;
  • Launch any application from the screen;
  • Done.
  • Press the button named HOME on your remote;
  • Go to the installation menu. upper right corner;
  • Click on the line “Network”, and then “Update Internet Content”;
  • A connection to the server will start to configure unavailable services;
  • After the end of the setup, a notification will appear about the return to the menu. refuse the offer and click on the “SEN” icon.
READ  Does Not Show TV Via Digital Set-Top Box

We hope that now the question of “what is it. a router for a TV and how to use it” will not bother you any more, because we have tried to explain the whole process in detail. Next, we will touch on the older models, the information will be useful to those who have not yet had time to acquire a “smart TV”.

How to tune channels on an old TV?

In the absence of a menu, channel tuning is carried out by special controls, which can be located under the switching buttons or on the back side near the antenna connector. In addition, on old domestic televisions such as “Electron” or “Rubin” and portable car TV receivers, band switching is provided using jumpers, sliders or buttons. Tuning of television channels for such devices is performed only with your hands.

Analogue Frequently Asked Questions

Sometimes in the process of setting up channels, certain questions may arise, some of which are discussed below.

Preparing the TV

Before proceeding with direct channel tuning, you must connect the TV to the broadcast source. With an analog signal, the cable of the antenna or cable TV operator is connected directly to the antenna input of the TV (marked in the photo):

In this case, it is worthwhile to separately consider the situation in which more than one TV is used in an apartment. In this case, a special antenna splitter is used for connection, which in most cases has two or three outputs:

How to manually tune channels on your TV

For all its apparent simplicity of automatic configuration, it has several significant drawbacks. Some channels may be repetitive, distorted picture or sound. In this case, you should correct the situation manually. Here is a step-by-step guide on how to manually set up TV channels:

  • In the “Channel setup” menu, use the navigation buttons to select “Manual tuning” and press ENTER / OK.
  • Select the “Program” item and assign a serial number to the channel by pressing the numeric buttons on the remote control.
  • Select the color system of your area of ​​residence: PAL, SECAM, NTSC or AUTO.
  • Select a sound system: 2.0 (stereo), 5.1, etc.
  • Search for the channel and, if successful, add it to the TV’s memory by pressing the “Save” button.
  • Repeat the same procedure for all required channels.

The manual channel setup menu might look like this:

It should be remembered that all actions in the proposed instruction are confirmed by pressing the ENTER / OK button.

How to automatically tune channels on your TV

This is the easiest way to set up and requires a minimum of effort and knowledge. The TV itself finds all available channels and remembers them.

To enter the automatic tuning mode, enter the TV menu by pressing the MENU button on the remote control. Depending on your TV model, this button may also be denoted by the words HOME, INPUT, OPTION, SETTINGS or special symbols in the form of three longitudinal stripes, a house, an arrow in a square, and others. detailed information on this matter contains the instruction manual for the operation and tuning of TV channels. Some variants of the designation of the menu call button are shown in

In some cases, before tuning channels on a conventional antenna, you must additionally select the region of your location. To do this, in the setup menu, find the item COUNTRY or REGION and select the corresponding entry in the list.

After the auto tuning of channels is complete, a sort menu may appear on the TV, with which you can arrange the channels found in an order convenient for viewing.

It is worth noting that when changing or adding transmitted channels by the cable TV operator, the setting must be done again.

How to tune channels on a TV without a remote control?

The process of automatic and manual setup in this case occurs in a similar way, but to access the TV menu, the buttons located directly on its body are used:

If there are no such buttons, you need to purchase a remote control.

How to tune channels from a conventional antenna to multiple TVs?

Often people complain that in one room the channels on the TV are tuned worse than in another. Some of them are missing, while the rest have interference. This is due to the wrong connection. It is important that both TVs are equidistant from the main cable. Otherwise, the one that is closer will take over most of the signal. Also, to connect two or more TVs, you should use a high quality cable that is better protected from interference. Therefore, the standard cheap cable, which is usually offered by many cable TV operators, will not work here.

How to tune channels on your polar TV

If you have purchased a new TV set, changed your cable TV operator or broadcast type, then the first procedure you will have to face is setting up TV channels on your TV.

Depending on the method of signal reception, there are three main types of broadcasting:

  • over-the-air. the broadcast from the TV tower is transmitted to a regular antenna;
  • cable. channel packages from the operator’s distribution center are transmitted to subscribers’ apartments by wire method;
  • satellite. the signal from the satellite is transmitted to a parabolic antenna (dish) and converted by the receiver.

In turn, terrestrial and cable television can be analog and digital. The second one is characterized by a higher quality of image and sound, but to view it, additional equipment in the form of a digital set-top box (tuner) may be required, especially when it comes to the old TV model.

Within the framework of this article, the automatic and manual tuning of analog channels on the TV is considered (for cable channels, everything will be identical).

How to find the TV code

The indicator that you will definitely need is the codes for the DEXP universal remote control. Usually they are in the instructions for the remote control, but only the most popular models are collected there. If your technique belongs to the category of rare, or vice versa. a novelty that has not yet been included in this list, then the secret combination for pairing should be clarified on the manufacturer’s website.

The main purpose of this combination is to link third-party devices with the remote control. It is possible to find out this value on the TV itself according to the following instructions:

  • log into YouTube;
  • open the main settings by clicking on the gear in the menu;
  • choose a method. connecting to the phone;
  • go to “Connect manually”, and you see the blue code there. it is he who will be useful to you.

Setting up the DEXP universal remote control

There are two types of debugging. automatic and manual. If you have not previously configured such devices, then it is better to strictly follow the instructions. The points are simple and straightforward, and their implementation will not take much time.

List of codes

Below are the most popular brands of digital technology.

Samsung 2051 0556 1840
Lg 1840 0714 0715 1191 2676
Sony 1825
Philips 0556 0605 2485
PanaSonyк 1636 0108
Toshiba 1508 0154 0714 1840 2051 2125 1636 2786
Acer 1339 3630
  • Corting 098.160
  • Koyoda 004
  • KTV 015.019.052.056.063.074.172.177
  • Cuba Electronic 097
  • Kura 097
  • Radiola 018.161
  • Radiotone 071.161
  • Radix 108
  • Rank Arena 017
  • REALISTIC 009.015.016.019.025.038.043.050.052.106
  • Record 149
  • Revox 018
  • Rex 042.071.076.099
  • Skye 018
  • SUPRA 025

How to connect the DEXP universal remote control to the TV: codes, instructions

How to set up the DEXP universal remote control is not known to everyone who first purchased it. That is why we have compiled step-by-step instructions on how to do it quickly. The DEXP company itself is a well-known trade mark in Russia that sells electronics, computers and household appliances. By right, it occupies a leading position, and continues to develop rapidly. For example, at the end of 2017, smartphones from this company entered the top five most popular brands. And in terms of the number of TVs sold in 2018, the corporation took fourth place, having won 9% of the market.

Manual

Next, we will consider connecting the DEXP universal remote control to the TV manually. If in the automatic method the device independently selects the key for pairing, then here you need to refer to the instructions and take the value there. Step-by-step instructions for manual debugging:

  • start the encoding mode by pressing “OK” and “TV” at the same time (they should be held for up to five seconds);
  • if everything turned on correctly, the “TV” key will be highlighted;
  • enter a four-digit key;
  • confirm;
  • test control functions. press any key and make sure it responds.

Automatic

  • turn on the technique;
  • point the remote control at the infrared port of the set-top box;
  • press the “Set” key and hold it for 2 to 7 seconds;
  • release Set when the indicator lights up;
  • click on the channel search;
  • then the automatic bulkhead starts;
  • when the icon goes out, quickly click on “OK” to save the value.

No code

If you don’t have any code, then we recommend using automatic debugging. Since its principle allows you to use the current information from the TV memory, but with the manual version, you will need to register all this yourself.

An alternative option is to use the remote control on your smartphone. Modern phones have many built-in and third-party utilities that can be easily and easily connected to equipment. speakers, TV, air conditioners, players, etc.

If you have any questions or complaints. let us know

DEXP TV setup, IPTV and digital TV connection

After buying a new TV, there is a need to set it up. Initially, you need to connect the device to the power supply. The screen will display additional recommendations for setting up the initial settings. In the menu, you will need to set the indicators of brightness, contrast, color saturation of the screen, you can also adjust the sharpness of the image and sound delivery. After setting the basic parameters, it is worth moving on to connecting digital television.

How to tune the TV to receive a high-quality signal. let’s figure it out further.

DVB-T2 set-top box

If your TV does not have a built-in tuner, you will need to purchase and install it separately. Having initially configured the receiver’s parameters, you can proceed to the search for channels on the TV. The search can be performed both in automatic mode and in manual mode. In the second case, you will need to set the search parameters manually.

READ  The TV does not pick up digital channels through the antenna

The algorithm of actions is as follows:

  • After selecting manual channel search, set the parameters of frequency, modulation and bit rate.
  • Start the channel detection process with the OK button confirming the action.
  • After the first found channel, press the “Next” and “Enter” buttons on the remote control.
  • Each channel found will be assigned a sequential digit, the search will automatically stop at each stage.
  • To continue the action, click the “Next” button.

Digital television

Having bought a DEXP TV, first read the instructions for use of the equipment.

IMPORTANT! Before setting up digital broadcasting on your Smart TV, make sure that it supports this technology. This means that the device itself already has a built-in broadcast tuner.

As a rule, all modern TVs support this broadcasting standard and you do not need to buy anything extra. If your device supports this format.

Let’s move on to setting up digital terrestrial channels:

  • On the remote control go to the Smart menu.
  • Select “Settings”. To confirm the login, click “OK”.
  • Click on the “Channel” section.
  • In the section for choosing the type of antenna, indicate DVB-C.
  • In the same place, we select “Auto-tuning”, which will automatically fill in the search data (frequency, modulation, transmission rate).
  • In the section of scan types, select the “Full” view.
  • Specify the network identification parameter as “Automatic”.
  • To search for channels, click “Search”.
  • After a period of time, autosearch will end its action and it will be available for viewing 20 terrestrial digital channels.

Broadcast standard

Before you start setting up digital television, you will need to determine which broadcast standard is advisable to use: it can be cable, satellite or terrestrial format. Since most modern TVs are already equipped with built-in receivers and decoders, you may not need to buy additional equipment. With a cable connection, you must purchase an access card and modulator from your provider and pay a monthly subscription fee.

The antenna is placed on the street towards the broadcast tower. A cable is laid from it, which is connected to the TV. For satellite TV, you will need to purchase a special dish and decoder. All digital broadcast standards reproduce high quality broadcasts, reaching Full HD and 3D.

To watch interactive television, you will need to install a special player. There are a variety of free IPTV applications on the internet. After downloading via Wi-Fi and installing immediately on the device, you can comfortably watch your favorite TV shows, as well as various additional features (not just viewing becomes available. you can stop the broadcast at a point of interest, as well as read information about it). Now the developers are presenting players for different operating systems.

Another possibility is the connection of several devices to digital television using a network LAN cable.

The popularity of Smart TV is at its peak today. Most of them support all digital broadcasting standards, which simplifies the connection and setup process. Since modern TVs are equipped with built-in receivers and decoders, this greatly simplifies the setup of digital television. No need to buy additional equipment for signal reception.

It is also recommended to periodically check all antenna connections to the TV, as over time the cable itself, plugs or antenna may fail. In case of any failures or problems with the broadcast in the absence of the possibility of an independent solution, you should contact a specialist.

The proposed article describes the procedure for setting up TVs from the manufacturer DEXP. Some items may differ from model to model. Also, the proposed algorithm will allow you to independently start the search for digital channels.

TV Sound Setting

Setting up the sound of the TV, as well as setting up the image, is done through the corresponding item on the MENU.
In this section, you can adjust the sound at high and low frequencies, adjust the sound balance of stereo speakers. You can also select sounds from preset values ​​optimized for speech, cinema, music, etc.

It should be noted that modern TVs rarely have excellent sound quality, and no setting of the TV will make the sound perfect.
To get good sound in this case, you need to connect an additional device to the TV: home theater speakers or soundbar.

How to tune channels on your TV

Our craftsmen adjust the TV and adjust the image on all models of imported and domestic production, on modern equipment and on those released in the twentieth century. Experienced specialists know how to set up television channels, how to display high-quality image and sound, how to set up the Internet on a TV, we suggest calling the wizard to set up a TV from our workshop.
8 (926).444-16-66 We are ready to help you.
For your convenience, a Consultation on setting up TVs is organized.

How to tune your TV to receive TV channels

Reception and tuning of channels on the TV must be done on a new, just purchased device, as well as in the event of a change in the source of the antenna signal, or when new television programs appear on the network, which has recently happened quite often.
There may be several sources of a television signal, and depending on this, they decide how to tune channels on the TV.

  • Terrestrial antenna. channel tuning is performed using the remote control or buttons on the TV case.
  • Cable antenna. similar to setting up to receive signals from an over-the-air antenna.
  • Satellite dish. tuning to channels is performed using the satellite receiver remote control, or the TV remote control if there is a satellite tuner in the device.

recently, terrestrial television (the list of terrestrial TV channels is given on the terrestrial TV channels page), i.e. setting the TV channels to receive a signal from the TV tower, provided the only opportunity to watch TV programs on your home TV. In this case, the design of the receiving television antenna is oversized, it must be located at a high altitude and oriented directly to the TV tower. The picture quality of the TV set connected to the terrestrial analogue TV leaves much to be desired, since the TV picture is influenced by the high-rise buildings located in the vicinity. In addition, the number of received television channels is small. Setting up TV channels for high-quality reception through an over-the-air antenna in urban environments is not easy, and often impossible.

Currently, on the territory of Moscow and other large cities, the most widespread is TV setting to cable TV channels (list of Rostelecom and Akado channels), which allows you to receive more than 40 analogue television programs in excellent quality and more than 100 digital ones. Broadcasting is carried out using an antenna cable already laid in the apartment, and without installing additional TV receiving units. receivers. In order to connect a TV, simply insert the aerial plug into the socket. The ability to receive analog TV channels is paid monthly by a rent receipt.

Setting up your TV

Setting up a modern TV consists of setting up the input source, setting the picture and sound quality, setting and sorting TV channels, setting the functional parameters of the TV, setting up the Internet connection.

Table: TV settings options

Set up your TV Settings
Setting the TV to output source from:
DTV. digital TV from antenna plug
ATV. analog TV from antenna plug
AV. audio and video signal from the composite port
SCART. signal from the comb connector
YPbPr. component video signal
HDMI. signal from high quality video / audio port
PC. using a TV screen as a personal computer display
USB. port for connecting a signal from a flash card or HDD devices
Adjusting image parameters
Brightness. setting the luminous intensity of all areas of the TV picture
Contrast. changing the ratio of luminous power of the brightest and darkest areas
Sharpness. adjust the sharpness of the image outlines
Saturation. a change in the color components of the screen image compared to a black and white image
Color tone. setting the color spectrum of lighting
Image format. changing the aspect ratio of the screen picture

Set up your TV Settings
Configuring sound settings
High frequencies. adjustment of high-frequency components of the audio spectrum
Low Frequencies. bass adjustment
Balance. adjust the volume ratio of the left and right speakers
Surround sound. setting the strength of the surround effect
Equalizer. adjustment of the components of different parts of the audio spectrum
AGC. adjusting the automatic gain control level
SPIDIF. setting up digital output connection for connection to high quality audio equipment
Tuning TV channels
Automatic tuning. the process of searching, numbering and storing TV channels occurs automatically
Manual setting. an automatic search of a pre-selected TV channel is performed
Fine tuning. allows you to shift the frequency of a pre-tuned channel, allowing you to obtain acceptable picture and sound quality in the presence of electromagnetic interference
Setting functional parameters
Menu language. Setting the display language of the TV OSD
Audio language. setting the audio language
Subtitles. configuring display options
Teletext. setting the output of broadcast teletext information
Blue screen. setting the screen appearance when there is no TV signal
Time setting. setting the internal clock
Setting up PVR. recording a TV program on an external medium on a schedule
Setting up the TV connection to the Internet
Add network. setting the choice of a home network from the list of possible connections
Wired connection. setting up the connection between the TV and the router via a twisted pair cable
Wireless connection. setting up a wireless Wi-Fi connection between a TV and a router
IP setting. setting a unique address for connecting the TV to the Internet
DNS setup. determining the domain name of the internet connection

How to set up the Internet on your TV

Modern Smart TVs use most of their ‘smart’ capabilities when they connect to the Internet. Your apartment must have a dedicated router connected and configured to allow various home devices to connect to the network.
How do I set up the Internet on my TV? To configure, enter the MENU items. Network. Network configuration. Select an item. Cable, for connection via a network cable, or item. Wireless when using a Wi-Fi connection, while you will need to enter a username and password to enter your home network.
When using an external wireless adapter, after connecting it, you need to restart the TV: turn it off, and turn it on again after a minute.

How to set up a new TV

How do I tune in channels on a TV I just bought or used to watch satellite TV? It is necessary to search for TV channels on the satellite receiver, while the TV is connected to the receiver with a special cable and switches to monitor mode.

READ  How to enable channels on Smart TV

To tune the TV to receive terrestrial channels or cable channels, analog or digital, you need to connect the antenna plug to the socket and, by pressing the button located on the body or on the TV remote control, enter the MENU. Then, in the AUTOMATIC TUNING or MANUAL TUNING mode, scan the entire frequency range. In this case, in AUTO mode, the TV is set up automatically, and in MANUAL mode, you need to set up each TV channel separately.

ATTENTION. In the “automatic tuning” mode, not only will all active channels be found, but also jamming signals will be saved and the current numbering of TV programs will be changed.

Do you know how to tune channels on your TV in good quality and the desired sequence? Fine!
Unfortunately, this is not always the case. Very often the quality of the TV setting on different programs changes from good to unacceptable. In this case, it is necessary to check the parameters of the antenna TV signal, first of all, its level and signal-to-noise ratio in the entire frequency range, and carry out work to bring them in line with the standard. You need to call the wizard to set up your TV.
We are ready to help you. Call us! Tel. 8-926-444-1-666

Adjusting the TV picture

Any settings in TV: setting the screen resolution, TV image or sound adjustment, in modern TVs are made by using the “Service menu”, which is called by pressing the MENU button on the remote control. Image adjustment is made by pressing the MENU button, then the item “Image”. In this section, you can adjust the optimal picture of your TV by changing the “Contrast”, “Sharpness”, “Brightness”, “Color” settings. By controlling the arrows, they change the scale values ​​of the required parameter up or down, achieving an image pleasing to the eye. Most TVs have an item that allows you to select a screen setting from preset values ​​optimized for watching TV programs of various content: sports, movies, bright, soft, etc.

Recently, the problem of changing the geometric proportions of the image displayed on the TV screen has appeared. This is especially noticeable in public. they can become very fat, or vice versa, very thin.
This is due to the different ratios of the height and width of the transmitted image. 16: 9 for modern broadcasts, 4: 3 for older movies. In the same proportions are the sizes of screens of modern TVs and those released in previous years.
Adjusting the TV picture produced by a special button on the remote control, or through the corresponding MENU item. As a criterion for the correct setting, it is convenient to use the logo of a television channel, which has a circle or a circle, for example, TVTs, MIR or EuroNews channels.

Setting up digital channels on a DEXP TV

Digital television has become available to a wide range of users. There are many offices offering their TV set-up services. However, you can do this yourself. This article will show you how to tune digital channels on your Dexp TV.

If your TV does not support digital

In the absence of the required DTV-2 standard, the easiest and most inexpensive way to solve this problem is to purchase a digital set-top box. Its other names are tuner or receiver. Buying a new TV will also solve the problem.

The purchase of a set-top box will cost much less than a new TV. In addition, many pay TV providers provide such devices for rent. With a set-top box, even the oldest TV can receive a digital signal.

Reference. The figure is supported by most models released after 2005. New generation TVs support this standard all, without exception.

Checking digital broadcast support

You can find out if your device supports this type of broadcasting at smotritsifru.rf. the official website of digital terrestrial television in the “All for reception” section. To do this, you need to select Dexp from the list, then specify the TV model.

You can also find this information in the documentation and on the product box. If it says that there is support for the DTV-T2 standard, then your TV accepts a digital.

A visual inspection of equipment is also capable of answering this question. If on the back or side of the TV there is an input jack labeled Digital input, or just T2, then everything is in order.

Deleting and sorting channels

For convenience, you can assign any of them a specific number on the remote control or remove unnecessary ones from the list. This requires:

  • Select the desired TV channel from the list of found.
  • To remove it from the list, press the red button on the remote. If you change your mind and want to add it again, you will have to repeat the entire search and setup procedure from the beginning.
  • To move the TV channel to another position, press the yellow button of the remote control, then using the buttons “▲” and “” move to the desired position.
  • If you left the menu window, then use the “Menu” button, then select the “Settings” item.
  • Click on “Channel Sort”. A special folder will be created and you will be prompted to enter a name for it.
  • Now you can edit the TV channels of this folder in the same way as in the list of found.

Manual setting

  • If you left the menu, press the “Menu” button on the remote control and enter the “Channels” section again.
  • Select “Manual DTV Search”. The setup window will appear.
  • In the line “Channels” enter the number on the remote control, which will correspond to the next found frequency.
  • In the “Frequency” or “Band” item, you must specify a numerical value. You need to enter it on the line in which you need to enter data in megahertz (MHz). They are set using the “” and “” buttons from the remote control. These frequencies are unique for each region.

Important! You can find a complete list of frequencies of free TV channels on the website at smotritsifru.rf. They are located in the Terrestrial TV coverage map section. Half of them belong to the RTRS-1 multiplex, the other to the RTRS-2. The frequency for them is different.

  • If you have cable or satellite television, then the list of frequencies and bands can be obtained from the provider by calling the hotline.
  • When you finish entering the parameters, the bar at the bottom will change, showing the signal strength.
  • Press “Enter” on the remote.
  • Available channels on the specified frequency will be found. Do not forget that a different frequency must be specified for each multiplex.

Automatic channel tuning on Dexp TVs

First you need to make sure that the batteries are inserted into the remote control, and the TV is powered from the mains. If before that TV was not connected to an antenna, cable or receiver, you need to do this.

How to set up a TV, step-by-step instructions for connecting a digital TV:

  • If no tuner is available, you must first specify the digital source. Click the “Source” button. From the list, using the designations on the remote control “▲”, “”, “” and “”, it is necessary to select “DTV”. Press “Enter”.

REFERENCE. If you cannot find the Source button on the remote, skip this step. You will be able to adjust the source in a different way.

  • Press “Menu” on the remote.
  • Use the “▲”, “”, “” and “” keys to select the “Channels” section from the menu. Press “Enter”.
  • If you are using a tuner, then you need to click on the “Tuner Mode” item. If you have a satellite dish, select “Satellite”. If paid TV is connected. “Cable” or “DVB-C”. To watch free 20 channels, specify “Ether” or “Ether” and confirm the action with “Enter”.
  • If you are not using a tuner, select “TV Mode” from the list that appears. Use the “” and “” buttons to specify the mode as in the previous paragraph.
  • Find the “Auto Search” function. Press Enter. Depending on the model or your TV provider, it may be labeled “Auto Tuning” instead.
  • Confirm the action by pressing the “Enter” button.
  • In the appeared window of the scan type select “Full”. Network identification. “Automatic”. The search process for available frequencies will begin.
  • After auto tuning is complete, a list of the found TV channels appears. Make sure the number is as expected. If some are not found, you need to configure manually.

Frequent mistakes and their solutions

The main problems encountered when setting up numbers for Dexp TVs are:

  • No screen image

The reason is a weak signal. If there is a thunderstorm outside, just wait until it stops. Otherwise, check the antenna mount and the cable entry between the antenna and the TV. If everything is in order, then you need to check the signal quality using the “Info” button on the remote control. If the “quality” value is less than 50%, and this value is not temporary, then you should think about purchasing an antenna amplifier.

If you have Pay TV connected, call the provider. the problem relates to him.

If, instead of 20 digital channels, the TV found 10, make sure that the rest can be viewed in your region. This can be done on the site smotritsifru.rf in the tab with an interactive map. If all frequencies can be viewed, visually inspect the cable and antenna. If everything is in order with them, use the manual channel search.

It is necessary to check the cables and antenna. Also, the problem may be a long distance to the repeater or the wrong direction of the antenna. Move the antenna and check the signal. If nothing has changed, your location may be too far from the signal repeater. Then you need an amplifier for the antenna.

  • OHDPluginLibrary Application Error

The reason is TV software failure. To solve the problem, you need to reset to factory settings through the menu. To do this, press the “Menu” button, select the “Settings” item, find the “Reset and Update” option and confirm the decision by pressing the “Enter” key. The device will reboot. After this step, you will have to perform the configuration again.