How to tune channels on a sony TV

How to tune satellite channels on a Sony TV?

  • Turn on the TV and go to the main menu section Settings (Settings). [Channel setup]. Digits.
  • Select Digital Satellite Tuning.
  • Select a satellite dish configuration.
  • On the satellite TV operator profile selection page, select Other (Shared satellites)

How to set up an antenna on a Sony Bravia?

Instructions for tuning channels on Sony KDL

  • Press the Home button on the remote.
  • When asked for a PIN code, enter 0000, 1111, 1234 using the remote control buttons.
  • In the menu that opens, find the item “Digital configuration”.
  • Open in the configuration “Digital setting”.
  • Go to autosearch digital stations.

How to set up your Sony Bravia 4k TV?

Select Settings. Select External inputs in the TV (TV) category.

  • Select Settings.
  • Select Sound and Screen.
  • Select Video Output Settings.
  • Select Resolution, then check if 2160p-RGB can be selected.

How to set up on a Sony TV?

With the TV remote control:

  • Press the Home button.
  • Go to Settings
  • Go to System Settings and press Enter (center button).
  • Go to General Set-up and press Enter.
  • Go to GUIDE Key Assignment (GUIDE Key Behavior).

How to set up your Sony Bravia TV Internet?

  • Press the HOME button on the remote control.
  • Go to Settings.
  • Select Network in the Network & Accessories category.
  • Select Network Setting.
  • Select Simple.
  • Select Wi-Fi.
  • Select a connection method.
  • Follow the instructions on the screen to complete the setup.

How to tune analogue channels on your Sony Bravia TV?

  • Press the [HOME] button on your remote.
  • Go to the Settings menu located at the bottom of the home screen.
  • Select Channel Setup. Analogue Setup. Analogue Auto Tuning.

Automatic channel search


To configure this parameter, you should use a previously downloaded diagram. The user needs to select the darkest parts of the gray stripes on it. The area on the left should be as black as possible. If there is no difference between the left and right areas of the screen, then everything was done correctly.

READ  How to reset iCloud without password

Sound setting

To adjust the sound, you need to use either an external speaker system or internal TV speakers. In this case, you will not have to adjust any additional options.

Search for digital TV channels

Many owners do not know how to tune digital channels on Sony Bravia TVs. This can be done quite simply by following the detailed instructions.
Tuning digital channels on such a TV is performed as follows:

  • In the main menu, select the “installation” section, then click the “digital configuration” subsection and click on the ok button.
  • Next is the link “digital setting”.
  • The key “autosearch digits” is pressed. stations “.
  • The intention to perform an automatic search is confirmed.
  • A window opens.
  • Selected link “cable”.
  • Basic parameters are entered for search.
  • The “quick scan” key is pressed.

After setting up digital TV and saving the changes, you can proceed to watching.

Setting up your Sony TV

In the event that the owner of Sony Bravia is faced with the task of setting up the TV for digital broadcasting for the first time, he should initially set the language into which all the menus will be translated. After that, you need to choose a location and come up with a digital combination (if there are minors in the family and they will not be allowed to watch programs of a certain orientation). At the next stage, the mode is selected in which the TV (home) will be operated and the place in which it stands (floor or table stand).

Color saturation

To get the most saturated colors in your image, look at the calibration chart and adjust until you achieve natural looking colors.


If the owner of the TV noted the unnaturalness of the image, then he needs to adjust the sharpness. This process should be carried out until a light outline remains on the calibration chart.

Extra options

After the basic functions are configured, you can start setting additional parameters. This should be done in the tab of the “settings” section. The link “system settings” is pressed, the subsection “eco” is located (the light sensor is turned off). The other parameters are set in the same way.

How to tune digital channels on a Sony TV

tune, channels, sony

Modern Sony TVs are equipped with a built-in receiver for decoding and viewing digital channels. Without connecting an additional package, you can watch 20 basic TV programs for free. Automatic and manual hardware configuration depends on the model. Let’s look at how to tune digital channels on a Sony KDL and Bravia TV.

READ  How to enable video from a USB flash drive on a TV

Adjust brightness, sound, contrast and sharpness

After connecting the equipment, setting the time and language, carrying out the calibration, you can proceed to the following parameters:

  • Brightness. A previously downloaded diagram is used for configuration. The most commonly used option is with 4 gray stripes. The area on the right should be nearly black. This indicates that the brightness is adjusted correctly.
  • Contrast. Save the brightness settings and move on to contrast. The adjustment is also carried out by stripes. Choose the lightest in the diagram and adjust until it turns white.
  • Sharpness is responsible for the naturalness of the image. The correct setting is also determined by the diagram. There should be no light contour around it.
  • Saturation of the color palette. It is necessary to bring all shades to maximum saturation.
  • The sound is adjusted through external acoustics or internal speakers. No additional adjustment required.

It is advisable to immediately adjust the additional parameters. Go to the “Settings” tab. “System settings”. subsection “Eco”. There you can turn off the light sensor and make other adjustments.

The digital TV setup on Sony TVs ends with an automatic channel search. To do this, just go to the appropriate section of the menu. Select a signal source (antenna, cable) and click search. When finished, save the found channels.

Features of the Sony Bravia TV

The new Sony Bravia TV sets up digital channels differently from other devices. Smart TV provides high quality picture and sound. A large number of channels organize leisure for the whole family.

Setting up a TV takes place in several stages:

  • Training;
  • Calibration;
  • Setting brightness parameters;
  • Adjusting contrast and sharpness;
  • Selecting the saturation of the color palette;
  • Setting sound options and advanced options.

Let’s consider each point in as much detail as possible so that you understand how to set up digital channels on your Sony Bravia TV.

Preparatory stage

Initial setup of digital broadcasting begins with the choice of the language in which the menu will be displayed. Then, you need to specify the location (country) and come up with a unique digital combination that will protect children from accidentally watching unwanted channels. You can write it down or come up with a simple password. year of birth, for example.

After entering the basic parameters, preparations begin for tuning digital channels on Sony Bravia. And the most important thing is to check the correct connections of all devices. And also check the operation of the remote control and the presence of batteries in it.

  • Turn on TV. Enter the menu through the Home key on the remote control.
  • Download calibration data if it has already been entered into the TV memory. If not, pay attention to the OS of the TV. For Android, you can download calibration from Blu-Ray or DVD with drivers.
  • Find in the menu section “Restore and reset” “factory reset“. There will be an automatic return and removal of all programs to the basic version.
READ  Sony wh ch500 factory reset

After that, you can proceed to re-or primary setup of digital broadcasting on Sony TV.

Calibration setting

Watching TV channels in perfect quality and with good sound allows you to properly set up digital television on Sony Bravia. Calibration is one of the setting elements. In its absence, sharpness decreases.

To load the parameters downloaded to a USB flash drive, PC or DVD, you need to go to the settings, to the “installation” subsection. Choose the link “Screen Control”. There will appear the parameter “automatic display area” and “maximum resolution”.

Instructions for tuning channels on Sony KDL

Sony plasma TVs or LCD TVs broadcast in high definition, excellent picture and sound quality. To set up digital channels, you must:

How To Scan For Channels On A Sony TV

  • Press the Home button on the remote. Go to the “Preferences” section. Select “Settings”.
  • When asked for a pin code, use the remote control buttons 0000, 1111, 1234.
  • In the menu that opens, find the item “Digital configuration”. If your TV model does not have such an option, go directly to auto-tuning (point 5).
  • Open in the configuration “Digital setting”.
  • Go to autosearch digital stations.
  • Choose the type of connection via cable. If this item is not available, return to the basic menu, open “Settings”. “Settings”. Country and specify Europe.
  • To search for channels, you must enter frequency indicators: from 306 to 345 thousand. Symbol rate should be at the level of 7000, modulation 128 QAM, automatic network access code.
  • Run a search. With the correct setting, there should be about 58 channels.

Important! To prevent the channels from getting lost, you need to check the correctness of the clock setting. Return to the main menu, go to “Digital configuration”, select the technical configuration and set the time zone to GMT.

After setting the time, the TV will restart. If you’ve tuned in the digital channels correctly on your Sony TV, everything will work as expected.