How to share internet on iPhone 7

share, internet, iphone

Table of Contents

iPhone. universal Wi-Fi router

iPhone is versatile, it can do almost everything. This is a mini computer that can handle any task. Many people use it as a replacement for a camera, someone plays games on it, some use it as a player. But sometimes the iPhone cannot cope with the task in the way the user would like. For example, watch a movie, do a job in Word or Excel.

It is better to read voluminous articles or books on a tablet or laptop. But what if you do not have a USB modem or you have forgotten it, the tablet version does not have a SIM card slot, and the Internet is needed urgently. You can’t even imagine that the iPhone will save you in this situation. After all, with the help of an apple device, you can distribute the Internet via Wi-Fi to other devices. This article will show you how to turn your iPhone into a Wi-Fi router.

The first thing to do is make sure you have the optimal data plan. Ideally, the internet should be unlimited so you don’t have to worry about traffic. Second, consider your internet speed. It’s best if you are in an LTE coverage area, at worst 3g. Since LTE is fast, you will not experience any discomfort with the speed. 3g, in theory, will provide a pretty good speed, but watching videos in HD or accessing heavy sites will no longer be so comfortable.

Having chosen the operator and tariff plan you need, you can start the procedure for setting up and distributing Wi-Fi via iPhone. For iOS 7/8, follow these steps:

  • Go to the “Settings” menu.
  • Go to the item “Cellular” (If you have never used an iPhone to distribute Wi-Fi before, you will not have a menu item. “Modem mode” or it will be gray and inactive)
  • Move the Cellular Data slider to the right.
  • We are waiting for 2-4 minutes.
  • After the item “Modem mode” appears (or becomes active) in the main menu, we go into it.
  • In the “Wi-Fi password” section, create a strong password.
  • Switch the “Modem Mode” slider to the right.

All is ready. To connect any device via Wi-Fi, you only need to select your apple device in the search for connections. Now you can distribute the Internet to any device. The disadvantage of this method is that in this mode, the iPhone consumes more power, so it sits down faster than usual. But you can connect it to the charger and the problem will be solved.

When you have finished using the Internet, to turn off this function, you need to:

  • Go to “Settings”.
  • Next, the item “Cellular”.
  • Slider “Cellular data” move to the left.

The function is disabled and the iPhone can be used normally without fear that it will consume too much battery power. And some tips:

  • Before sharing Wi-Fi using iPhone, charge it to 100% or charge it during use.
  • Check with your carrier about your tariff plan. It is best to choose an unlimited plan, so as not to be surprised by large bills at the end of the month.
  • Use LTE mode for more comfortable Internet surfing or watching videos.
  • Use a strong password so no one else can use your Wi-Fi.
  • Turn off Modem Mode immediately upon completion of work.

By following all the instructions, you will save battery power and protect yourself from unnecessary waste. Now, thanks to the iPhone, you can stay abreast of all the latest events in the world and always be in touch with family members, do important and urgent work anywhere.

In iOS 8 (possibly in the 9th a similar situation), the slider for enabling modem mode is hidden by default. To display it, you just need to go to “Settings”. “Cellular”. “Cellular data network” and scrolling through the menu to the item “Modem mode” write: APN. internet, Login. gdata, Password. gdata.

Do not forget to read the comments, there is also a lot of useful information. If there is no answer to your question, and there is an answer to later comments, then the answer to your question is contained in the article, respect someone else’s time.

Reasons for poor Internet performance on iPhone

Problems connecting to mobile internet on iPhone

Comments: 57

strange. but I don’t have any “Wi-Fi distribution on the iPhone”.

Maybe this option depends on the version of iOs. From the 7th it works for sure, I checked it personally.

What to do if everything is turned on, but the Internet is still not on the iPhone or iPad

If, after performing the above steps, communication with the World Wide Web through mobile (cellular) traffic does not appear, then for the Internet to work, you will need to enter the correct settings (APN data, username and password) for your cellular operator.

APN data, username and password must be entered along the path: Settings → Cellular → Data settings → Cellular data network → Cellular data section. For example, for the Belarusian MTS, the data is as follows:

APN: mts
Username: mts
Password: mts

Usually, these data are sent by the operator via SMS automatically. You can also find them out by calling the service numbers or at the company’s office.

How to turn off mobile (cellular) Internet on iPhone or iPad

Turning off the mobile Internet on an iOS device is also very simple. just tap the slider opposite “Cellular Data” located in Settings. On will change to Off, which means that the smartphone is no longer connected to the Network. In Control Center, the Cellular Data button will change from green to transparent.

How to enable mobile (cellular) Internet on iPhone or iPad

You can access the Internet from an iPhone or iPad from any place where your cellular operator provides a mobile access to the World Wide Web.

Go to “Settings” and select the “Cellular” section. Tap the slider to the right of the “Cellular Data” label. it will turn green, and the letter “E” or the word GPRS will appear to the right of the name of your operator. We just went online! True, so far. only at low speed, through the second generation of 2G cellular networks. Their resource is enough for the most basic tasks. for example, updating mail or correspondence in Skype. but absolutely not enough for surfing the web, navigating maps and downloading applications.

Another very serious drawback is that with 2G enabled, you can only do one thing: either make calls or surf the Internet. If you choose the second option, they will not be able to get through to you! Therefore, it makes sense to activate faster mobile Internet 3G or LTE (provided that, of course, there is coverage of these networks in your region).

You can enable 3G or LTE in the same section “Cellular” by clicking on the item “Data Options”, and then “Voice and Data”

In addition, starting with iOS 11, a switch has also appeared in the Control Center that allows you to turn on / off mobile Internet.

How to turn on and off mobile (cellular) Internet or Wi-Fi on iPhone and iPad

It is difficult to imagine a modern smartphone or tablet without an Internet connection. Reading news, finding something you need in a search engine, downloading a useful application or an interesting game. all this requires Internet access. This instructional article will tell you how to access the Internet from your iPhone or iPad. and how to get out of it.

How to turn on Wi-Fi on iPhone or iPad

Accessing the Internet via a wireless Wi-Fi connection is the fastest and most comfortable way to surf the Web using your iPhone or iPad. The speeds are comparable to those that you use on your computer. The source of Wi-Fi can be a home modem, a careless neighbor, or a public institution (such as McDonalds). Starting with iOS 7, there are two ways to enable / disable Wi-Fi on iPhone or iPad:

  • Open Control Center (swipe up from the bottom of the display). In the “curtain” that appears, just tap the Wi-Fi icon. Wi-Fi enabled. blue icon;

ATTENTION! With the release of iOS 11, Apple changed the principle of disabling Bluetooth and Wi-Fi modules through the “Control Center”. The two buttons are no longer standard on / off switches. and disconnect the wireless connection only after a set period of time.

In more detail about managing Bluetooth and Wi-Fi in the Control Center, we talked in this material.

  • Go to “Settings”, select the item “Wi-Fi” (second from the top), touch the only switch, select the required network and password to it. Green. “on”, gray. “off”.

That’s it, you are now armed with the knowledge on how to turn Internet on and off on iPhone or iPad. Enjoy your journey across the Internet!

For further work, it is advisable to choose either an unlimited tariff plan. Otherwise, you can lose a significant amount from your account in just a dozen minutes of using the Internet.

How to enable tethering and share Internet (Wi-Fi) from iPhone or iPad

Everyone knows that the iPhone is a multifunctional device. However, not everyone is aware that the gadget can act as a full-fledged portable access point. a router. for other mobile and desktop equipment. “Sharing” the Internet from an “apple” communicator or tablet is actually very simple.

How to enable tethering and share Internet (Wi-Fi) from iPhone or iPad

Starting with iOS 13, the interface of the Tethering section in the Settings app on iPhone and iPad has been changed.

The Modem Mode enable button has disappeared, replaced by the Allow others toggle button.

When the Allow to other iPhone option is disabled, only devices that use the same Apple ID in iCloud will be able to share the Internet without the need to enter a password.

On an iPhone with iOS 12 and an older version of the OS, the tethering mode is turned on by the corresponding switch along the path: Settings → Tethering mode;

When the Allow others option is enabled, it is strongly recommended to password protect access to the network.

What to do if the Modem mode item is not in the Settings

It happens, however, that Modem Mode is missing from the settings. Then you need to take the following steps:

To begin with, you need to make sure that the data transmission network. mobile Internet (instructions) is working on the device. If it works, but the mode still does not appear, then go to the next step;

Go to Settings and follow the path Cellular → Cellular data network → Cellular data (for previous versions of iOS, the path is slightly different: Cellular → Data settings → Cellular data network → Cellular data);

Here you need to fill in the fields in the Cellular Data and Modem Mode sections. There you will need to enter the APN, Username and Password of your mobile operator. The operator usually sends this data automatically when installing the SIM card. You can also clarify them by calling the operator, naming your tariff plan.

For example, for the Belarusian MTS, the data is as follows:

APN: mts
Username: mts
Password: mts

APN data, username and password of some Russian, Belarusian and Ukrainian operators can be found on this page.

If the mode does not appear after entering the data, then the device must be rebooted. After rebooting, turn on the Modem Mode, select the Turn on Wi-Fi item and set the password. A successful connection will be indicated by a blue bar at the top of the screen.

READ  What is the difference between iPhone X and X S

How to turn off the Internet on iPhone through a mobile operator?

You can turn off the Internet on the iPhone not only through the settings of the mobile device, but also through the operator. over, at any tariff. even one that involves prepayment.

Most often, parents of young users of iPhones who want to restrict their children in access to the network are forced to turn to the help of operators. If parents turn off data transfer through the “Settings”, this will not help. the child will quickly understand how to return 3G.

When contacting the operator, you need to ask to remove the non-unlimited Internet service. Removing this service will lead to the fact that the traffic will be paid by kilobytes. and this will “cost a pretty penny.” It is necessary to remove the option that provides access to the network. This option is included in the starter package and has a discreet name. as a rule, “GPRS”. USSD combinations for removing such, starting services are little known. it is easier to disable GPRS by contacting the provider’s hot line or consultants at the salon.

Mobile operators offer special services that partially restrict Internet access. so that small users can only go to useful sites. Megafon calls this service “Children’s Package”, MTS calls it “Children’s Internet”. Beeline subscribers can filter Internet content on their children’s phones using the Parental Control option.

How to turn off Wi-Fi on iPhone?

If you need to turn off not the mobile Internet, but the Wi-Fi connection, you can do it in 2 ways. The first method is as follows: you need to find the “Wi-Fi” section in the “Settings”, go into it and deactivate the “Wi-Fi” slider.

The second method is even simpler: you should call the “Control Center” with a swipe up and down and click on the icon with the familiar Wi-Fi symbol. The icon will darken. this will mean that the Wi-Fi connection has been terminated.

How to turn off mobile internet through iPhone settings?

The procedure for disconnecting the Internet on the iPhone is slightly different depending on which version of iOS is on the mobile device. On a gadget with iOS 7 and higher, deactivation occurs as follows:

In the “Settings” find the section “Cellular” and go to it.

In the “Cellular” section, sequentially move the “Cellular data” and “Enable 3G” sliders to the inactive position.

If you only deactivate the “Enable 3G” toggle switch, the Internet connection will remain, but it will become very slow. Data transmission will take place using EDGE technology. this is a maximum of 474 Kbps.

In the same section of the settings, you can block access to the Internet for individual applications installed on the iPhone. Scroll to the bottom and you will find the Cellular Data for Software block.

After analyzing the statistics, you can conclude which applications are the main traffic consumers and prevent them from going online. In our example, you can see that the built-in navigation program “Maps” “ate” much more megabytes than others. If you do not use a navigator, it is wise to disconnect it from the Internet. To do this, it is enough to move the slider opposite the “Maps” item to the inactive position.

Another useful iPhone option is Data Roaming.

Thanks to this option, the user can avoid the impressive costs of Internet traffic abroad. If the slider is deactivated, the gadget will stop accessing the network as soon as it finds itself in international roaming.

On iPhones with “operating systems” version below 7.0, you can find the “Cellular data” and “Enable 3G” toggle switches by following the path “Settings”. “General”. “Cellular data”.

How to turn off internet on iPhone?

Disabling the Internet on iPhone will help save not only traffic, but also battery power. Every user of “apple” gadgets should be familiar with this procedure. especially since it is extremely simple and performed in a couple of steps.

Although communication providers position their Internet tariffs as unlimited, service users still have to face restrictions. In particular, with traffic limitation. Subscribers are offered a certain amount of traffic. after it is used up, the connection speed drops so much that it becomes impossible to use the Internet.

It is in order to save traffic that it is recommended to turn off the Internet on the iPhone when the gadget is idle. This article will tell you how to do this.

A user who saves traffic by periodically turning off cellular data on the iPhone runs the risk of missing an important and urgent notification from any messenger or social network. Therefore, it is better to spend time and make more flexible customization of the mobile device, limiting access to the Internet to those applications that are needed “on big holidays”. Then it will turn out to “shoot two birds with one stone”. to save traffic, while staying in touch.

How to provide a PC with Internet via a USB cable?

You can distribute the Internet from iPhone to computer via USB as follows:

Toggle the Hotspot slider in iPhone Settings to the active position. You will see a window like this:

Connect the gadget to the PC with a USB cable. A blue bar will appear at the top of the iPhone screen. a sure sign that the 2 devices are paired.

On a PC, go to the “Network and Sharing Center”, then go to the section “Change adapter settings”.

You will see that in the list of network connections there is a new local area connection named as a mobile device.

Try going online. You will find that when connected via USB, data downloads are even faster than via Wi-Fi.

Connecting a PC to a gadget via USB has another advantage: iPhone battery power is consumed to a much lesser extent.

How to connect a computer to the Internet via iPhone: a common method

Most often, users connect their PCs to iPhones via Wi-Fi. We will not describe this method in detail. there is an article on our site dedicated to him alone. Let’s tell only in a nutshell: the iPhone owner needs to find the “Modem Mode” section in the “Settings” section and activate the toggle switch of the same name.

Then the user should switch to the PC and click on the network icon, which is located in the taskbar.

Next, you need to find your device in the list of wireless network connections and connect to it.

How to connect a computer to the Internet via iPhone?

Everyone knows that you can organize the distribution of Wi-Fi from the iPhone. But this way of “sharing” the Internet is not the only one; there are even more effective ones. In the article, we will describe in detail each of the possible methods.

IPhones of the latest modifications can fully replace laptops and stationary PCs. However, some operations are simply inconvenient to perform on mobile gadgets. For example, when reading blog articles from a large laptop screen, the user strains his eyes to a much lesser extent than when trying to make out letters on a small gadget display.

Fortunately, Apple developers have endowed iPhones with the ability to distribute mobile internet. After organizing the distribution, the user can connect the PC to the Internet and continue to carry out their tasks on a device with a more comfortable keyboard and a larger screen. There are several ways to connect a computer to the Internet via an iPhone: the user can choose which one is most convenient for him.

How to use Bluetooth to connect your computer to the Internet?

You can also connect an iPhone to a laptop to distribute the Internet via Bluetooth. This is done as follows:

Go to the “Bluetooth” section in the “Settings” iPhone.

Switch the toggle switch “Bluetooth” to the active position.

iPhone starts searching for devices to pair with.

Activate Bluetooth on your PC. If the laptop is equipped with the appropriate module, the wireless adapter icon will be in the system tray (at the bottom right of the screen).

Click on the Bluetooth icon with the right mouse button and select “Open Options”.

In the “Bluetooth Settings” section, check the box next to “Allow Bluetooth devices to find this computer”.

Once again click on the Bluetooth icon in the system tray and in the menu that appears, select the option “Add device”.

This will start the search procedure on the computer.

After the PC finds the iPhone and the pairing is established, you can access the Internet through the browser on your computer.

Despite the fact that iPhone users are more accustomed to distributing the Internet to their computer via Wi-Fi, a wired connection looks even preferable. It uses up battery power more slowly and provides faster connection speeds.

The method of connecting via Bluetooth among users is unpopular for a number of reasons: firstly, not all PCs have a Bluetooth module, and secondly, in order for pairing to become possible, the user will have to find and install the necessary drivers. Few people want to spend time on this, especially if Honor has no advantages of a Bluetooth connection over, say, a Wi-Fi connection.

How to share mobile Internet from iPhone 7 via USB?

This method requires purchasing the appropriate cable. With its help, you need to connect the phone to the laptop. After that, you need to go to the control panel of the laptop and find “Network and Internet”. In this section, you need to go to “View network status” and check if the connection has been activated. In turn, in the phone’s modem mode settings, you must check the box next to “USB only”.

This method also answers the question. how to distribute the Internet via iPhone 7. However, it should be borne in mind that in this case the connection speed will be much lower. Therefore, it will be very difficult to watch a movie or play.

On the other hand, the phone will be constantly recharged.

APN settings of cellular providers

In order for everything to work correctly, you need to connect the mobile Internet. Then make a few more manipulations. precisely, you need to set up an Internet connection. To do this, just go to the gadget settings and find the “Cellular” section. If the APN configuration is not performed automatically, then you need to do it manually. To do this, select “Cellular data network”.

How to share internet from iPhone 7

It is worth saying that you can share the Network signal from any iPhone in which the corresponding module is installed. In this case, the device, of course, must be connected to the mobile Internet.

However, Honor says that when additional devices are connected, the traffic will start to increase exponentially. Therefore, when wondering how to distribute the Internet from the iPhone 7, you should first make sure that the phone uses an unlimited mobile Internet tariff. Otherwise, the costs will be huge.

In order to turn your favorite iPhone into a travel modem, you must first turn on the “Cellular Data” options and activate the “3G / 4G LTE” function. To do this, follow these steps:

  • Go to the phone settings and select the “Cellular” section.
  • Enable “Modem mode”. In some cases, you may need to additionally activate Bluetooth.
  • When a message appears on the screen about the activation of the modem mode, all that remains is to enter the password from Wi-Fi.

It is best to come up with a complex wireless access code, especially if your phone does not have an unlimited plan. Otherwise, anyone can connect to the access point.

This is the easiest way to share Internet from iPhone 7. After activation, you can visit your favorite sites from any device running on Android or Windows. However, this is not the only way to access the network.

How to Share Internet from iPhone 7: Ways to Share

With the onset of summer, almost all people move from stuffy offices and concrete apartments to nature. However, no one wants to give up the Internet, especially the owners of “apple” products. Fortunately, the modern iPhone can be used as an access point in order to enjoy your favorite sites on multiple devices at once.

Although this option is available and quite easy to connect, many do not know how to distribute the Internet from the iPhone 7 and subsequent models. In fact, there is nothing difficult about it. You don’t have to resort to gimmicks or add extra devices to share your wireless signal.

Why the Internet is not being distributed?

Some users often face this problem. However, before you start to panic and wonder why the iPhone 7 does not distribute the Internet, you need to make sure that all the settings were made correctly.

It is quite possible that the device is not simply switched to modem mode. In this case, it will be impossible to distribute the Internet.

Another common mistake is that when the gadget is connected to the computer, it turns out that an outdated version of iTunes is installed on the phone. In order to solve this problem, it is enough to install the current software version, then reboot the devices.

Also, the reasons for the inoperative modem can be more trivial. Perhaps the device is simply missing the required module.

In most cases, the phone starts distributing the Internet immediately after activating the necessary options. Additional settings are usually not needed.

How to share the Internet via Bluetooth?

In this case, you need to pair the iPhone with the PC as well. Only in this case, not a cable, but Bluetooth is used. After making the connection, you need to do the following:

  • Specify the code (will be displayed on the iPhone), which is required in order to activate the “Pair” option.
  • Connect from PC to the phone and wait until the last one displays the inscription “Modem mode”.
READ  Where does iPhone memory go?

If everything is done correctly, the gadget will start working as an access point. In this case, it will be possible to use it as usual.

Knowing how to distribute the Internet from the iPhone 7 plus and on other models of “apple” products, you can enjoy the benefits of the global Internet in any conditions. If the signal is working properly, and all the settings have been made correctly, then many different devices can be connected to the iPhone. However, we must not forget about the security of the network. It is best to come up with a password that contains not only numbers, but also letters written in different registers. This will not only protect against freeloaders, but also against scammers who can hack mail or get other data from the phone.

If the modem mode is not available

But it can also happen that the “Modem mode” item in the settings is inactive (highlighted in gray) or even missing. In this case, select the “Cellular” item in the settings and enable data transmission (“Cellular data”).

It is also helpful to go to the Data Parameters section. “Cellular Data Network” and scroll down the page to make sure that the APN, Username and Password fields are filled in and correspond to the cellular operator you are currently using.

Typically, the Internet connection is configured automatically by ISPs. But failures and non-standard situations are possible. If the listed fields are not filled in or filled in incorrectly, you need to get the actual parameters from the operator.

The look of iOS settings hasn’t changed much over the years. Knowing how to distribute the Internet via Wi-Fi or USB from iPhone 5s, you can easily figure out how to connect the most modern mobile gadgets from Apple.

How to distribute Internet from iPhone: to PC and laptop, via USB

The iPhone had the ability to transfer data back in 2008. This is a very useful function, since you can distribute the Internet from an iPhone or Apple tablet with a SIM card to computers, laptops, and even to other phones.

  • Enable data transfer to iPhone.
  • Connect devices to the created network in a suitable way.

Watch also a video where you will learn how to distribute the Internet from an iPhone or iPad:

By bluetooth

Data transmission via Bluetooth loses to other options in terms of speed. But broadcasting the Internet in this way is almost as easy as distributing Wi-Fi to a computer from an iPhone.

To make a connection, you must:

  • Enable iPhone data transfer mode.
  • Activate Bluetooth on both devices.
  • Create a pair.
  • Assign a Bluetooth device as an access point.

To create a pair on a PC or laptop running Windows, you need to go to the “Control Panel”. “Devices”. “Bluetooth”. In the list, you need to select “iPhone” and click on the “Connect” button that appears next to it.

On iPhone, you need to allow pairing, and on Windows, confirm that the code matches.

Now the connection is established, but the Internet is not working yet. You will need to select “iPhone” again in the list of devices and click “Connect via”. “Access point”.

Baud rate

You can distribute the Internet both via Wi-Fi, and via USB or Bluetooth. over, you can create several connections at the same time. For example, connect iPad via Wi-Fi, and a stationary computer that does not have wireless modules. via USB.

When choosing how to distribute the Internet from iPhone to computer, do not forget about the data transfer speed. Wi-Fi provides sufficient speed for both comfortable surfing and downloading files. USB transfer speed varies by version. 2.0, which models 4, 4s, 5 and 6 work with, is much slower than Wi-Fi. But USB 3.0 and 4.0 show solid speed. Bluetooth of any of the existing versions is 2 orders of magnitude inferior to them.

Note that speed is based on the slowest device in the pair. Therefore, if you are using an iPhone 4s with USB 2.0 and the most modern laptop with USB 4.0, the data transfer speed in this bundle will still not exceed 480 Mbps.

Cellular data transmission is a power-consuming operation. The phone battery will drain very quickly, so it makes sense to put the phone on charge immediately after turning on the tethering mode.

By USB

We have found a video instruction for you on how to connect the Internet via USB:

If you do not know how to distribute the Internet from iPhone to PC that does not have wireless modules, use USB. Let’s take a closer look at how to share the Internet from an iPhone via USB.

Plug in the wire and give the computer time to detect the USB device. The easiest way to do this is with Mac OS, for obvious reasons. For Windows 7 and 10, we recommend installing iTunes. In this case, there are no problems with iPhone detection.

A new element appears in the network connections section, which is activated in the standard way. If the hardware does not appear in the list, try restarting your computer.

By WI-FI

Let’s figure out how to distribute Wi-Fi from iPhone to devices running different operating systems. First, turn on Wi-Fi on your PC or laptop.

In Windows 7 and 10, this can be done through the icon located on the taskbar. On laptops, turning wireless devices on and off is also possible using a dedicated switch or function keys. Which one depends on the model, so see the instructions for your laptop. You can also control Wi-Fi from the Control Panel.

The situation is similar in Mac OS. You can connect Wi-Fi through the icon on the top panel, or in the system settings, in the “Network” section.

It’s easy to figure out how to distribute the Internet from iPhone to iPad, because they both work under iOS. After turning on data transfer on the phone, you just need to turn on Wi-Fi in the tablet settings.

Similar steps are required for Android tablets or phones.

After activating the modem mode, a network is created, which is visible in the list of Wi-Fi connections. The network name contains the word “iPhone”. Just select this network and after asking for a password, enter it.

There is no need to change the parameters of the created connection, everything should work fine with the default settings. If everything worked out, the following message will appear on the top line on the smartphone: “Connected devices 1”.

Putting the iPhone in tethering mode

Let’s try the iPhone 5s as an example. First of all, you need to enable data transfer. This can be done in the settings. There you will see the item “Modem Mode”. You need to go into it and activate.

The first time you connect, a password will be automatically generated. It is required to be entered on all devices that will connect to the iPhone via Wi-Fi. If desired, the password can be changed. There is no risk of forgetting it, since it is not hidden by the system.

The password should not be too simple so that lovers of free Internet surfing cannot use your network.

Agree to the offer to turn on Wi-Fi if you plan to distribute the Internet in this way. The listed actions may be enough for everything to work and the question of how to distribute the Internet from an iPhone to a laptop or PC is solved.

How to distribute Internet from iPhone: to PC and laptop, via USB

The iPhone had the ability to transfer data back in 2008. This is a very useful function, since you can distribute the Internet from an iPhone or Apple tablet with a SIM card to computers, laptops, and even to other phones.

  • Enable data transfer to iPhone.
  • Connect devices to the created network in a suitable way.

Watch also a video where you will learn how to distribute the Internet from an iPhone or iPad:

If the modem mode is not available

But it can also happen that the “Modem mode” item in the settings is inactive (highlighted in gray) or even missing. In this case, select the “Cellular” item in the settings and enable data transmission (“Cellular data”).

It is also helpful to go to the Data Parameters section. “Cellular Data Network” and scroll down the page to make sure that the APN, Username and Password fields are filled in and correspond to the cellular operator you are currently using.

Typically, the Internet connection is configured automatically by ISPs. But failures and non-standard situations are possible. If the listed fields are not filled in or filled in incorrectly, you need to get the actual parameters from the operator.

The look of iOS settings hasn’t changed much over the years. Knowing how to distribute the Internet via Wi-Fi or USB from iPhone 5s, you can easily figure out how to connect the most modern mobile gadgets from Apple.

Putting the iPhone in tethering mode

Let’s try the iPhone 5s as an example. First of all, you need to enable data transfer. This can be done in the settings. There you will see the item “Modem Mode”. You need to go into it and activate.

The first time you connect, a password will be automatically generated. It is required to be entered on all devices that will connect to the iPhone via Wi-Fi. If desired, the password can be changed. There is no risk of forgetting it, since it is not hidden by the system.

The password should not be too simple so that lovers of free Internet surfing cannot use your network.

Agree to the offer to turn on Wi-Fi if you plan to distribute the Internet in this way. The listed actions may be enough for everything to work and the question of how to distribute the Internet from an iPhone to a laptop or PC is solved.

Baud rate

You can distribute the Internet both via Wi-Fi, and via USB or Bluetooth. over, you can create several connections at the same time. For example, connect iPad via Wi-Fi, and a stationary computer that does not have wireless modules. via USB.

When choosing how to distribute the Internet from iPhone to computer, do not forget about the data transfer speed. Wi-Fi provides sufficient speed for both comfortable surfing and downloading files. USB transfer speed varies by version. 2.0, which models 4, 4s, 5 and 6 work with, is much slower than Wi-Fi. But USB 3.0 and 4.0 show solid speed. Bluetooth of any of the existing versions is 2 orders of magnitude inferior to them.

Note that speed is based on the slowest device in the pair. Therefore, if you are using an iPhone 4s with USB 2.0 and the most modern laptop with USB 4.0, the data transfer speed in this bundle will still not exceed 480 Mbps.

Cellular data transmission is a power-consuming operation. The phone battery will drain very quickly, so it makes sense to put the phone on charge immediately after turning on the tethering mode.

By USB

We have found a video instruction for you on how to connect the Internet via USB:

If you do not know how to distribute the Internet from iPhone to PC that does not have wireless modules, use USB. Let’s take a closer look at how to share the Internet from an iPhone via USB.

Plug in the wire and give the computer time to detect the USB device. The easiest way to do this is with Mac OS, for obvious reasons. For Windows 7 and 10, we recommend installing iTunes. In this case, there are no problems with iPhone detection.

A new element appears in the network connections section, which is activated in the standard way. If the hardware does not appear in the list, try restarting your computer.

By bluetooth

Data transmission via Bluetooth loses to other options in terms of speed. But broadcasting the Internet in this way is almost as easy as distributing Wi-Fi to a computer from an iPhone.

To make a connection, you must:

  • Enable iPhone data transfer mode.
  • Activate Bluetooth on both devices.
  • Create a pair.
  • Assign a Bluetooth device as an access point.

To create a pair on a PC or laptop running Windows, you need to go to the “Control Panel”. “Devices”. “Bluetooth”. In the list, you need to select “iPhone” and click on the “Connect” button that appears next to it.

On iPhone, you need to allow pairing, and on Windows, confirm that the code matches.

Now the connection is established, but the Internet is not working yet. You will need to select “iPhone” again in the list of devices and click “Connect via”. “Access point”.

Wi-Fi over bluetooth

Computers do not have a built-in WI-FI module. After all, they usually connect directly to the router via an Ethernet cable. Accordingly, it will not be possible to distribute the Internet from the phone to the computer via a mobile hotspot. What to do? There is a way out. you need to distribute WI-FI via Bluetooth. To do this, on the phone, in the “Access point and modem” section, you need to move the switch next to the Bluetooth modem item to the active position.

After starting the Bluetooth modem mode, you need to turn on the computer and follow the instructions below:

  • Before sharing WI-FI from an iPhone or Android phone, you need to connect your PC to your mobile device. To do this, go to the control panel of your computer (you can do this through the “Search”).
  • In Control Panel, click on the tab called “Devices”. There you need to select the sub-item “Bluetooth”.
  • The system will detect devices that are close to your PC. Select your device from the list, then click on the “Connect” button.
  • The smartphone will ask you to connect. To confirm it, you need to tap on the “Create a pair” button. On the PC, you also need to confirm the connection in the window that appears.
  • The connection between the devices is established. To use the mobile Internet, you need to right-click on the Bluetooth icon, which is located on the taskbar of your computer.
  • Select Show Bluetooth Devices from the drop-down list. A new window will open with a list of paired devices. Highlight your smartphone, then click on “Connect via” in the top panel. In the drop-down list, select the “Access Point” option.
READ  How to find recently deleted photos on iPhone

After carrying out the above manipulations, the Internet on the computer should appear. If the sites still do not load, then in this case, try replacing the DNS addresses. This is done as follows:

  • Go to the “Network Connections” section located on the control panel.
  • Then RMB click on the “Bluetooth Network Connection” adapter. In the drop-down list, click on the inscription “Properties”.
  • Find the item “IP version 4 (TCP / IPv4)” and then click the “Properties” button. A new window will open, in which it is necessary to check the item “Use the following DNS server addresses”. Now manually register static DNS addresses.

Access point settings

A mobile hotspot, like any router, can be configured (i.e. change the name of the access point, set a password, etc.). This is done as follows:

  • Go to the “Mobile hotspot” menu (how to get to it was mentioned above).
  • Tap on the “Advanced” button, which is located in the right corner of the screen. It looks like an ellipsis.
  • In the drop-down list, tap on the item “Setting up a mobile hotspot”. A new window will open. In it you can see the current password, set a new access key, change the name of the hotspot.

Modem mode

Perhaps the simplest way to distribute Wi-Fi from your phone is to use the so-called modem mode. It can be used to share the Internet with other users.

Let’s consider the process of its activation using the example of a smartphone from Samsung. So, to enable modem mode, you need to:

  • Go to the “Settings” menu. There you need to find the “Connections” item and tap on it.
  • Then you need to go to the section called “Access Point and Modem”.
  • There is the item “Mobile access point”, but opposite you can see the switch. Click on it to activate tethering.

After carrying out the above manipulations, the mobile access point is activated, and your phone can act as a router. You will be able to distribute the Internet from your phone to a laptop and other devices that have a hardware Wi-Fi module.

Attention! Before turning on the distribution of the Internet, make sure that your tariff plan provides you with mobile traffic.

How to distribute mobile Internet from a phone

The situation when you need to distribute Wi-Fi from your phone happens quite often. Fortunately, modern smartphones have a special hardware module that allows you to share the Internet. Nevertheless, many users do not know how to distribute the Internet from a phone. If you belong to this category of people, then you have come to the right place. Indeed, in this article we will talk about how you can distribute the Internet from an iPhone or Android.

How to distribute the Internet

Not so long ago, it was impossible to distribute WI-FI from a mobile device. Fortunately, relatively recently, WI-FI Direct technology was introduced into modern devices. What is Wi-Fi Direct and what is it for? In fact, this is a special technology that allows you to distribute the Internet directly from Android, iPad, iPhone and other mobile devices. At the same time, there is no need for an intermediary device in the form of a router. This feature is implemented using a special hardware module that is built into the mobile gadget.

The ability to distribute the Internet from iPad and other mobile devices has appeared relatively recently. Let’s consider several ways how you can distribute the Internet from a mobile device to a tablet, phone, laptop, computer, etc.

Wi-Fi over USB

However, not all computers have a module for connecting via Bluetooth. In this case, the only way to connect to the mobile internet is to use USB. Before sharing Wi-Fi on your iPhone or Android, connect your smartphone to your computer via a cable. Then you need to go to the “Access Point and Modem” section and there activate the switch that is opposite the USB-modem item.

A new network connection will appear on the computer. It is through him that you can access the World Wide Web.

Important! If you are the owner of a device from Apple, then for a correct connection via USB, you need iTunes to be installed on your computer.

Bluetooth

This method is not as convenient as the previous ones, but it can also be used if you do not have a USB cable, and your laptop or computer has Bluetooth. The internet speed will be slow, but the connection is stable.

  • Turn on mobile data and Bluetooth on iPhone.
  • Turn on Bluetooth on your laptop and start a search for available devices to connect.
  • After finding the network, the “Create a pair” request will appear on the smartphone screen. Accept it.
  • Open the “Control Panel” on your computer, find the connected iPhone in the “Devices and Printers” section, click on it and select “Connect via an access point”.

After this setting, the Internet should appear on the computer, which the iPhone will distribute from mobile traffic.

Additional help

If you still can’t connect, contact Apple Support for help with your iPhone or iPad (Wi-Fi Cellular).

The iPhone had the ability to transfer data back in 2008. This is a very useful function, since you can distribute the Internet from an iPhone or Apple tablet with a SIM card to computers, laptops, and even to other phones.

  • Enable data transfer to iPhone.
  • Connect devices to the created network in a suitable way.

By WI-FI

Let’s figure out how to distribute Wi-Fi from iPhone to devices running different operating systems. First, turn on Wi-Fi on your PC or laptop.

In Windows 7 and 10, this can be done through the icon located on the taskbar. On laptops, turning wireless devices on and off is also possible using a dedicated switch or function keys. Which one depends on the model, so see the instructions for your laptop. You can also control Wi-Fi from the Control Panel.

The situation is similar in Mac OS. You can connect Wi-Fi through the icon on the top panel, or in the system settings, in the “Network” section.

It’s easy to figure out how to distribute the Internet from iPhone to iPad, because they both work under iOS. After turning on data transfer on the phone, you just need to turn on Wi-Fi in the tablet settings.

After activating the modem mode, a network is created, which is visible in the list of Wi-Fi connections. The network name contains the word “iPhone”. Just select this network and after asking for a password, enter it.

There is no need to change the parameters of the created connection, everything should work fine with the default settings. If everything worked out, the following message will appear on the top line on the smartphone: “Connected devices 1”.

We have found a video instruction for you on how to connect the Internet via USB:

If “you do not know how to distribute the Internet from iPhone to PC, which does not have wireless modules, use USB. Let’s take a closer look at how to share the Internet from an iPhone via USB.

Plug in the wire and give the computer time to detect the USB device. The easiest way to do this is with Mac OS, for obvious reasons. For Windows 7 and 10, we recommend installing iTunes. In this case, there are no problems with iPhone detection.

A new element appears in the network connections section, which is activated in the standard way. If the hardware does not appear in the list, try restarting your computer.

What to do if the Internet does not distribute or there is no “modem mode” item in the settings

If the iPhone does not distribute the Internet, then the problem is manifested by the lack of a modem mode in auto-tuning. To obtain it, you need to carry out the following scheme:

Share internet from iPhone 5, 6, 6s, 7, 7 Plus to PC with USB Cable

  • Make sure that the mobile Internet on the device is working.
  • Go to the sub-section “settings” and go through the path “cellular communication-cellular data network-cellular data”. For older versions of iOS: “Cellular. Data Options. Cellular Data Network. Cellular Data”.
  • In the subsection “modem mode” and “cellular data” fill in the empty columns: enter the username, password and APN from the cellular operator. Information is automatically sent when the SIM card is inserted. If the action did not happen, then you need to contact a consultant, name the tariff plan and get the necessary information.
  • If the modem mode does not appear after entering all the data, the device needs a reboot. After that, they find the “modem mode”, look for the item “connect a wireless network” and set a password. If you follow the steps exactly, a blue bar will appear on the top of the screen.

Important! On iPhone and iPad, you can connect the “auto access” option

If the Internet is not distributed from the equipment in standard modem mode, then the main problem is the incorrect setting of the parameters. To eliminate the malfunction, they go through a step-by-step algorithm:

  • Check the inclusion of the required mode.
  • Make sure the password is entered correctly.
  • Reboot the device.

Difficulties can also arise when using the wired option. To fix the problem, a number of steps are taken:

  • Updating the iTunes program. on the official developer page, they find the latest version.
  • Assign the status of trusted to the connected device.
  • Make sure the gadget “sees” iTunes.
  • Go to the system settings subsection, look for the “iPhone USB” subsection.
  • Press the gear sign and deactivate the service, apply the function.
  • Click the icon again, activate the service and confirm the changes.

Important! If the cellular router is not working, you need to update the iTunes program, confirm that the device is included in the trusted registry and make sure that it is recognized. After the end of all the manipulations, the quality of the USB connection to the network is checked

iPhone 7. How to Set Up a Wifi Hotspot

If there is no Internet connection via Bluetooth using the iPhone on the computer, you need to disconnect and connect Bluetooth, break the connection between the devices. Find “forget this device” in the settings and confirm the action. On a PC, clicking on the corresponding icon deletes the desired item in the list of possible ones. After that, all equipment is rebooted.

If the modem mode on the iPhone has disappeared, then a software update is often referred to as a common cause. The transition from the ninth version to the next leads to a failure of all settings. the recovery operation is carried out according to the above schemes.

The second source of problems is the transition from one cellular operator to the second. Old data remains in the gadgets settings and a general failure occurs. Sometimes the user himself accidentally dumps all the information, causing the complete removal of the previous parameters.

To reanimate the modem mode, the following actions are carried out:

  • The subsection “settings” is opened on the device, gradually moving from “cellular communication” to “cellular data transmission”.
  • Look for “modem mode” in the names.
  • In the APN column enter “internet”.
  • They return to the initial settings and check for the presence of a “modem mode”.

In most cases, the above steps will allow you to return to normal gadget operation. If the problem remains unresolved, then they try to carry out other manipulations:

  • Reboot the system using the “Home” and “Power” buttons, which press simultaneously.
  • Go from “settings” to “basic”, then from “reset” to “reset network settings”.

In order not to ask yourself every time the question of how to connect the Internet to a personal computer via iPhone or Android, you must carefully study the connection rules and prevent accidental changes in the settings system. After changing the mobile operator, you need to make sure that the transition went through when the data was updated. Otherwise, all changes will have to be done manually.

Having figured out the problem and the settings, the owners of gadgets freely use the advanced capabilities of the gadget, including all devices that require the Internet (televisions, smartphones, netbooks, etc.) into the network. To avoid huge bills for using the Internet, you need to constantly monitor the volume of traffic.

Connecting to a device in modem mode via Bluetooth

  • On a Mac computer, click in the menu bar. Select your iOS tethering device, then select Connect to Network. You can confirm the establishment of the connection in the “System settings” “Network”. If the connection fails, go to the next section.
  • On a Windows PC, click in the notification area and select Join Personal Area Network (PAN). Right-click the device name, point to Connect Via, and select Access Point. If you still can’t connect, go to the next section.