How to set up Internet on LG TV

Wi-Fi adapter

First of all, you need to make sure 100% that your box has Wi-Fi. To do this, you should look at the documentation. You can also go to the official LG website, type in the full name of the TV into the search box and then look at the characteristics there.

HELP! If you yourself get confused, you can write the name of the model in the comments, and I will tell you whether it has Wi-Fi or not.


If not, you can purchase an LG adapter. AN-WF100 or AN-WF500. These are proprietary modules that help older TVs to connect to Wi-Fi. You can learn more about it here. But if your TV does not have a LAN port and the “Network” category, then you cannot connect such a box to the Internet and the network.

By wire

If you nevertheless decide to connect via cable, then just plug one end of the wire into the LAN port of the router.

There are usually several LAN ports and they differ from the WAN port in color or designation. An Internet cable from the provider is usually inserted into the WAN port, so if you have this, you can choose any free entrance and insert the cable there.

Now you need to find the same input on the back of the TV and insert it there. Now the connection light on the front of the router should light up. After that, nothing else needs to be done and the Internet, in theory, is already on the TV.


If you already have a configured router, then you need to connect to it. To do this, you can use both a wired cable connection and over the air using radio waves or in another way Wi-Fi.

How to go online from LG TV: tips from Borodach

Hello dear reader! Most likely you went to find out how to get online on an LG TV. In fact, it is quite simple and everything connects quickly and without any problems. First of all, you need to have an “Internet” at home. But not simple, namely connected via a router.

The point is, the TV cannot act as a gateway, so it must connect through a router. Also, plugging in a cable from the provider is not an option, so the Internet will not get there. The situation is similar with USB modems.


  • Select the section with the planet and the name of the network. Next, click on the item “Network Connection”.
  • Click on the block to connect to the wireless network;

NOTE! Not all TVs have a built-in Wi-Fi module. Therefore, if this item is not present or you have problems with the connection, then go to the next chapter.

  • In order to select your network. you need to click “List of networks”. After that we choose our own. After that, you will be asked to enter the WI-FI key. Fill it in carefully.
  • At the very end, you will see that the device is now connected to the wireless network.

How to use the internet

NOTE! If you have any difficulties with the connection, then write about it in the comments and I will help you.

Cable connection

It is best to connect your LG TV to the Internet by pulling the cable from the router to the TV.

  • Connect one end of the cable to the LAN output of the router.
  • Connect the other end of the cable to the LAN input of the TV.
  • The message “Wired network connection established” appears briefly on the TV screen. Now you can use the Internet!
  • On outdated TV models, you will have to activate the connection yourself through the menu “Smart TV” → “Network” → “Set up a connection” → “Wired network”.

If you do not have a router, then the cable that goes into the apartment can be connected to the LG TV directly. But this method only works if the provider uses a dynamic IP. Fortunately, in most cases in Russia this is the case.

Reference Library | LG USA Support

Since life waits for no one, at LG USA we create consumer electronics, home appliances and mobile devices to help you connect with those who matter most. Whether it’s preparing nutritious and delicious meals for your family, staying connected on the road, sharing your favorite photos, watching a movie with your kids, or creating a clean, comfortable place to celebrate important moments, we’ll be there for you every step of the way.

READ  The TV Is Connected Without Internet Access

Explore our complete collection of LG electronics, mobile devices, home appliances and home entertainment solutions. and find everything you need for family and family wherever they are.

Get a streaming device

Using your device to stream data is by far the most convenient way to connect your TV to your home Wi-Fi. Most of the time they plug into your TV’s HDMI port and a power outlet so that each streaming app is displayed directly on your screen. (There are a few exceptions here, but they’re rare. The ATT TV app, for example, is not available on Roku devices.)

Streaming devices usually cost around 30 without 4K compatibility, and 50 with it. If you think you will be switching to a 4K TV soon, it might be worth using a 4K streaming device. While your new 4K TV will be able to connect directly to the Internet, streaming devices will almost always provide a better user experience and usually give you access to more apps than Smart TVs.

We’ll take a closer look at the pros and cons of each streaming device, but here are the basic stats for the most popular brands:

Keep in mind whichever streaming device you use, you still need to subscribe to apps like Netflix and Hulu separately.

Easy TV Connect Guide | LG USA Support

At this stage, all wires should be connected to the TV, and the devices are laid out on the floor.

Use the color code table as a reference and connect the correct cables to the appropriate devices.

Important: Make a note of the input number of the audio receiver you are connecting the cable to. You will need to refer to this later.

Insert all cables into the appropriate devices. Use the color-coded notebook described earlier to check the device colors.

Connect the other ends of these cables to the input ports of the soundbar.

Using a laptop, mark the port to which each device is connected.

At this stage, all wires should be connected to the TV, and the devices are laid out on the floor.

Use the color code table as a reference and connect the correct cables to the appropriate devices.

How to connect LG TV to the Internet, connect and configure Wi-Fi on LG Smart TV. LG MAGAZINE Russia magazine

Have you bought an LG Smart TV? Be sure to connect it to the Internet. without this you will not be able to use many useful functions! There are several ways to connect your LG TV to the Internet, but the main two are cable or Wi-Fi. Wireless connection is more convenient, but it may not be enough for viewing high-definition content.

How to set up Internet on LG TV

Modern Smart TVs support the ability to connect to the Internet. This functionality opens up great prospects for viewing IPTV. All you need to connect and set up high-quality Internet TV on your LG TV is to install the convenient SS IPTV application. With its help, you can solve a number of tasks related to viewing online content from the network.

Installing with LG Smart World

Using the remote control, go to the Smart platform of the TV, for this press the “Home” button.

After that, you need to select the “Smart World” box.

In the upper right corner of the screen of your LG TV there is a button “Search”, press it.

In the description line, enter “ss IPTV”, then press the red button on the remote control.

A list of available applications will appear on the screen, select SS IPTV.

After that, several options for the available actions should appear, we click “Install”. Wait for the app to fully install.

After the installation is complete, click “Run”.

If you followed all the steps correctly, the SS IPTV application will be installed on your TV. There is another installation method, we will consider it further.

Installation using a USB stick

Before you start installing the application, you need to download the archive

After downloading, unpack the archive to a USB flash drive.

Insert the USB stick into the USB port on the TV. If the flash drive cannot be read, you need to fix the problem.

Launch the Smart platform by pressing the “Home” button.

For normal launch, registration in LG Apps is a prerequisite (if there is no account yet, if there is, then re-registration is not required). Press the button “Register”.

A window with a user agreement will appear. Choose “Agree”.

Next, fill in all the required fields. The data must be entered correctly, this is important for the successful installation of the SS IPTV application. After that, select “Authentication” and click “OK”.

A letter will be sent to the mailbox, in which it is necessary to confirm the registration in LG Apps. After successful registration, launch “My Applications” and select a USB flash drive as source by clicking the special icon.

READ  How to connect a computer TV with an Internet cable

Launch the SS IPTV icon and use the application for watching Internet TV.

Wired connection (LAN)

Connect the LAN port located on the back of the TV to an available port of the router using a network cable of the required length (cable is not supplied with the TV).

Open the Smart-menu by pressing the Home button on the remote control; and select the INSTALLATION item ;. 3. In the window that opens, go to the NETWORK tab ;, the Network settings: wired;.

As a rule, in most cases (if the wired network is using a broadband router or modem with DHCP function), the connection can be established with the automatic default settings. in this case, select the IP Autoconfiguration mode;.

If you need to specify the IP address and DNS server address manually, use the Manual IP setting mode; and enter the addresses using the buttons on the control panel.

Click OK; The TV will check the network settings and display the connection result.

Wireless connection (WI-FI)

Check the User’s Guide to see if your TV model has a built-in WI-FI module. If your model does not have it, you can connect your TV via the LG AN-WF100 WI-FI USB adapter (sold separately). Connect the WI-FI adapter to a free USB port on the TV.

Before connecting, you need to configure the access point. It is recommended to place it no closer than one meter from the TV set to avoid interference and conflicts with the remote control. If a wireless network connection is available for your TV, the following item will appear on the settings screen: Network settings: wireless;.

Select it by pressing the OK button on the remote.

In the window that appears, select the desired connection method:

  • Configuring from the list of access points (AP); if you know the name of your home WI-FI network and additional parameters.
  • Easy installation (WPS button mode); if your router supports Wi-Fi Protected Setup automatic connection mode. This is the easiest way to install. just press the WPS button, go to the TV menu, click Connect and select automatic or manual IP setting, just like with a wired connection.
  • Network setting [Ad-hoc] ;. if you want to connect the TV to your home wireless network, but without access to the Internet. On the computer, in the network connection settings, you must enter the IP address (, the subnet mask ( and the default gateway ( When choosing this method of connection, you will need to enter the network ID and the security key of the device (information about the settings can be changed if desired using the red button), then enter the computer’s gateway address as the IP address of the TV and vice versa. IP address of the computer as a gateway to the TV.

In the list of found WI-FI networks, select the name of your access point or WI-FI router.

When using a secure connection (if you have a hidden network. Hidden SSID), select Enter a new SSID ;, enter the network name manually and enter your key.

If your WI-FI network is protected by a password, enter it using the remote control by pressing the red PIN button;.

The TV will check the network settings and display the connection result.

Connection via a WI-FI router

A Wi-Fi router is used to connect multiple devices to one Internet channel. That is, you have an input cable from the provider, and you connect this cable to the router, and already connect all the necessary devices (computer, laptop, TV, etc.) to the outputs of the router. You can connect devices to the router, either using a cable or using a wireless Wi-Fi network. In any case, you need to configure such connections using the information from the instructions.

Such a connection through a router is the most optimal. After all, you can connect many devices using just one type of setting. At the same time, routers are able to support any type of connection with the provider and you do not have to look for solutions, as in the previous case with a direct connection of the TV to the provider.

A cable connection is more reliable than a wireless connection, but the disadvantage is the presence of cables in the room. And the wireless one must provide a good signal level at the receiving point, otherwise the connection to the Internet may be lost.

Cable connection

Connecting the TV directly to the provider’s cable is possible but not recommended. First, you won’t be able to use the internet on other devices. Although new TVs have the ability to create an access point, that is, the TV itself will distribute the Internet to other devices. But it is still worse than using specialized equipment, the same external router. Secondly, not all TVs have this kind of connectivity. After all, each provider uses a different technology for connecting to the network. There are several such technologies and TVs do not support the entire set of such connections, so it may turn out that your TV is not compatible with your provider, and it will not work to directly connect the TV receiver to the Internet. For example, not all TVs support PPPoE, L2TP, PPTP technologies, but “dynamic IP” technology can be used on many TV sets.

READ  How to connect an antenna to your LG TV

How to connect and setup your LG Smart TV to a home wireless network and the internet for apps

In any case, you will have to manually enter data on the TV. The most common ones are IP addresses and DNS servers. If the provider binds the connection to the MAC address, then in the information on the TV you find this MAC address and inform the provider. In order to find out the MAC address of the TV, go to the “Support” section, there select the item “product information” and there, among the various data, there will be a MAC address.

Connecting LG TVs to the Internet

Modern LG TVs have the ability to access the Internet, and to use this opportunity, most models have a Smart TV platform. It is through Smart TV that the TV receiver interacts with services on the Internet, such as watching movies, communicating on social networks, installing applications from sites, etc.

You can connect your TV to the Internet if you already have a cable from your provider, for example, you already have a computer with Internet access. The Internet must provide a speed of at least 5 Mbps to be able to watch online movies in high definition. You can either connect the TV directly to the cable entering the apartment, but then other devices will not be able to use the Internet, or connect a Wi-Fi router and set up an Internet connection through it.

There are several ways to connect your TV to the Internet:

  • 1) Directly to the provider’s cable;
  • 2) Through an external router. by cable or by creating a wireless connection, then:
  • a) Using the internal WI-FI module, connect to your home Wi-Fi network;
  • b) Using a WI-FI adapter, connect to your home Wi-Fi network.

Wireless connection with a Wi-Fi router

If there is a WI-FI module or you connected an adapter, then after going into the network settings of the TV, as written in the previous paragraph, you will see the following item available: “Network setting: wireless”.

After going into the wireless network settings, you can make settings in one of three options.

  • 1) Setting from the list of access points (AP). select this item if you know the name of the WI-FI network and the password to it;
  • 2) Easy installation (WPS mode). this item can be selected if the router also supports it (then the router must have a WPS button). Select this item and press the button for 15 seconds on the router, and everything will be automatically configured;
  • 3) Network setting (Ad-hoc). used to communicate with a computer without Internet access.

By selecting the item “Setting from the list of access points” you will see all the networks available at that moment at the point of installation of the TV. Choose your network from the list and, if required, enter the password (you make the password in the router settings for 8 characters from numbers and letters of the Latin alphabet). If the network name is encrypted, then enter the network name. The name of the network and the password to it are indicated when setting up the router, then you write down this data for yourself to enter on the connected devices. If everything is entered correctly, the TV will display a message about the wireless network connection and an icon with the WI-FI signal strength will be visible.

Cable connection to the router

After such a connection, the TV should display the words “wired network connection established”. That is, all parameters were automatically configured. If you need to enter the parameters manually, then we go along this path in Smart TV: Home. Settings. Network. Setting the “wired” network.

If you need to manually enter the IP address and DNS server, then enter them on this page using the remote control. If everything is correct, the TV will display a message that the connection is established.

WI-FI adapter for LG TV

Firms that make TVs in their TV sets have made it possible to use an external Wi-Fi module to create a wireless network. Only now they did it so that ordinary WI-FI modules do not work with TVs, such modules are produced for use in computers. LG did the same, it released its own WI-FI adapter (external module) called LG AN-WF100. The price of such a module is about 30. whereas the models of such modules for a computer are 3 times cheaper.

The LG AN-WF100 adapter is connected to the USB 2.0 connector, and provides speeds up to 300 Mbps. Supports the following communication standards: IEEE 802.11a / b / g / n.