How to set up a microphone on a Lenovo laptop

How to enable microphone on Lenovo Windows 10 laptop?

Configuring and Testing Microphones in Windows 10

  • Make sure the microphone is connected to the computer.
  • Select Start Settings System Sound.
  • Under Sound Options, open Input Select Input Devices, then select the microphone or recording device you want to use.

How to enable microphone in Android settings?

In the engineering menu, you need to go to the Hardware section, where you click on the Earphones and Mic subsection (or something similar). After that, you should adjust the sensitivity of the microphone in the headphones in the Speech Enhancement sub-item (until a normal sound level occurs). May 18, 2019.

How to set up the built-in microphone on a Lenovo laptop?

To install or reinstall the sound card driver, you must:

  • In the “Start” menu, select “Control Panel”;
  • Find “System” in the Control Panel;
  • In it, select the “Devices” tab;
  • Here you need to find your built-in microphone;
  • Open “Properties” with the right mouse button;

Where is the microphone in Lenovo?

Inspect the edges of the LCD screen for a small hole labeled mic or a microphone icon. Built-in microphones are often found at the top of the display, especially when the built-in webcam is next to the microphone. Look at the edges of the laptop case.

How to turn on the microphone in the settings?

Microphone settings through the engineering menu

This code looks something like ### or ###. These combinations can be considered universal, they are suitable for most Chinese devices. To enter the engineering menu, you need to enter the required combination using the buttons and then press the call button.

Turning on the microphone: what to look for

1) Check the condition of the microphone

This is the first thing I would recommend to start with. The fact is that for most of them, everything is in order with the microphone itself (i.e., it is physically sound), all drivers are installed and the software is in order. but the microphone does not work due to the fact that it is turned off! Or, simply by default, another device is selected as the microphone (which does not transmit sound).

    right-click on the sound icon in the tray and select “Sounds” from the menu (see screenshot below). Alternative option: go to the control panel, in the “Hardware and Sound” section and click on the “Sound” tab;

then open the “Recording” tab and see if there are any devices with the name “Microphone” or “Microphone” (if not, and the microphone is connected. check the device manager, see below). Click on it with the right mouse button and select “Enable” (see example below). If you have multiple microphones installed: Note that the default is the one you want to talk through (see arrow 3).

try to say something into the included microphone: you should see a green bar start to “run” (This is all in the same “Recording” tab, see the example below).

By the way, if anyone does not know: the built-in microphone in laptops is usually located above the screen, next to the web camera. See example below.

Where is the microphone usually located on a laptop

2) Is the microphone sealed.

For security purposes, many users tape their laptop webcam (so that no one can spy on them). But along with the camera, the microphone is also glued. as a result, you simply cannot be heard.

Fix Microphone Not Working on Windows 10

Way out: either remove the sticker, or make it smaller so that it covers only the “eye” of the camera.

Addition ! Can they watch me through a webcam? How to protect your device from hacking. https://ocomp.info/zashhita-veb-kameryi.html

Pay attention also to the hole for the microphone: is it clogged with dust, is there any debris, etc.

3) Are the drivers installed on the microphone

To see if a driver is installed for your microphone, you need to use the Device Manager. The easiest way to open it is to press the WinPause Break keyboard shortcut. and in the menu on the left select the link you are looking for.

In Device Manager, expand the “Audio Outputs and Audio Inputs” tab and see if you have any devices named “Microphone”. Please note that exclamation yellow signs should not be “lit” opposite them.

To try updating the driver: select the device, and then click on the green arrow icon in the menu (see screenshot below).

Device Manager. Driver Update

How will a device look like in the task manager for which there is no driver (as an example)

To automatically update drivers on a PC / laptop, I recommend using the Driver Booster program. Detailed instructions here. https://ocomp.info/utilita-dlya-avto-obnovla-drayverov.html

By the way, after installing the driver in the control panel (how to open it) in the “Hardware and Sound” section, a link to its configuration should appear (for example, the Realtek control panel, Smart Audio, Dell Audio, etc.).

In the driver’s control panel (see a couple of screenshots below), you can fine-tune the sound (filters, surroundings, effects, etc.) and the microphone. By the way, check that it is turned on in the driver settings and its volume level is at maximum.

Smart Audio. setting up the driver (effects, fine tuning of sound, microphone, recording)

Realtek, device type: headphone / microphone / line-in

4) If you want to use an external microphone

When connecting an external microphone (and many people stop at headphones with a microphone), pay attention to the audio outputs on the laptop. Now you can find 2 different options: headset jack (on newer devices), and classic (see photo below). The headset jack has a distinctive icon: headphone and microphone.

Classic (left) and headset (right) jack (s)

The bottom line is that if you connect a microphone with a classic plug to the headset jack (or vice versa), most likely it will not work for you (although there are exceptions). Please note that they even have plugs with a different number of contacts (the headset has 4 of them).

Headset plug (left) and classic plug (right)

If it so happens that you have a headset jack on your laptop (for example), and you bought ordinary computer headphones with a microphone (with a classic plug), then just buy an adapter. There are a lot of them now, and you can find them for almost all cases (one of them is shown in the photo below).

Adapter for connecting classic headphones with a microphone to the headset jack

  • How to enable the built-in microphone on a laptop
  • How to check the microphone in a laptop
  • How to set up the built-in microphone in a laptop

Consider the most versatile and simple way to turn on the microphone, regardless of the drivers you have installed and the type of sound card of your computer.

The first paragraph of the step is instructions for Windows 7, the second for Windows XP.

Images are for Windows 7. Win7:

Find the speaker icon in the tray and right-click on it. WinXP:

We go to Start. All programs. Standard. Entertainment. Volume

Right-click on the microphone, select “Enable”.

If the icon has become colored and a check mark appears on it, everything is done correctly. Go to the “Volume” menu (see the first step). We are looking for a slider under the inscription “Microphone”, move it to the desired position (adjust the sensitivity of the microphone).

When recording from the built-in microphone of a laptop (lenovo, acer, asus (ASUS) or any other), problems often arise. for some reason it does not work.

What then needs to be done? Enable, configure, check. This can be done in two ways. automatic and manual.

It is better to give priority to the first. automatic. Use the second option as an additional one. Everything that will be described below applies to Windows 7 and Windows 8. I don’t remember in XP, I haven’t used it for a long time.

First of all, you should definitely pay attention to the drivers. In their absence, no setting will help. you will not be able to turn on the microphone in any way.

NOTE: you can also increase the microphone sensitivity and use other effective options. instructions with description here.

How to set up the built-in microphone in a laptop automatically

To configure the microphone in the laptop automatically, enter the control panel. There go to the “troubleshooting” section

Now as shown in the picture below click on “troubleshoot audio recording”

A window will appear in front of you. click further below. It will change to something else. There you will be offered two options for setting. select the first. See fig.

READ  How to get into BIOS on Lenovo

The system will automatically fix everything and turn on the sound recorder, you just have to confirm it by clicking on the words “apply this fix”.

Wait for the end. Now you can close the window. your microphone should be configured (enabled)

How to turn on the built-in microphone in a laptop in manual mode

To turn on (configure) the laptop microphone in manual mode, right-click on the “speaker” icon in the tray and click on the line “recording devices”.

This will open a window where you can enable and configure your laptop’s sound recorder.

If you have, as shown in the figure below, then everything should work correctly. if not, correct.

Of course, do not forget about the drivers, which I wrote about above. without them, nothing works in the computer. To download (if not available), it is best to choose the official site.

microphone, lenovo, laptop

Now that you have done everything according to the instructions (as described above), the performance of the microphone needs to be checked.

ATTENTION: if you made a recording from a microphone, but it turned out to be of poor quality, then various noises and so on can be easily removed. here are the instructions on how to do it.

How to turn on microphone on Lenovo laptop

Good time everyone.

99.9% of modern laptops come with a built-in microphone (by the way, many users, without knowing this, buy a separate external microphone). True, its quality of work is far from always ideal, but nevertheless, for some one-time negotiations it is quite enough.

In this article, I’ll cover (briefly) how you can enable it, and why it sometimes fails. I will also touch on the topic of connecting an external microphone. I think the article will be useful to everyone who wants to start network negotiations.

If you have a problem with the microphone on the headphones (for example, no one can hear you), I recommend that you read this instruction here: https://ocomp.info/kak-proverit-mikrofon.html

How to test the microphone on a laptop

I will describe the easiest way. Click start, click “all programs” scroll to the bottom of the window and select “standard”.

In this section, find the “Sound Recorder” utility and click on it. A small panel will appear on the desktop.

On the left side there will be an option “start recording”. click. Say a few words and click on it again, only now it will say “stop recording”.

Save it and listen to it. If you hear your voice, it means that the microphone is on. the setting is correct. Success.

How to set up the built-in microphone in a laptop automatically

To configure the microphone in the laptop automatically, enter the control panel. There go to the “troubleshooting” section

Now as shown in the picture below click on “troubleshoot audio recording”

A window will appear in front of you. click further below. It will change to something else. There you will be offered two options for setting. select the first. See fig.

The system will automatically fix everything and turn on the sound recorder, you just have to confirm it by clicking on the words “apply this fix”.

Wait for the end. Now you can close the window. your microphone should be configured (enabled)

How to turn on the built-in microphone in a laptop in manual mode

To turn on (configure) the laptop microphone in manual mode, right-click on the “speaker” icon in the tray and click on the line “recording devices”.

This will open a window where you can enable and configure your laptop’s sound recorder.

If you have, as shown in the figure below, then everything should work correctly. if not, correct.

Of course, do not forget about the drivers, which I wrote about above. without them, nothing works in the computer. To download (if not available), it is best to choose the official site.

Now that you have done everything according to the instructions (as described above), the performance of the microphone needs to be checked.

ATTENTION: if you made a recording from a microphone, but it turned out to be of poor quality, then various noises and so on can be easily removed. here are the instructions on how to do it.

How to enable the built-in microphone on a laptop

When recording from the built-in microphone of a laptop (lenovo, acer, asus (ASUS) or any other), problems often arise. for some reason it does not work.

What then needs to be done? Enable, configure, check. This can be done in two ways. automatic and manual.

It is better to give priority to the first. automatic. Use the second option as an additional one. Everything that will be described below applies to Windows 7 and Windows 8. I don’t remember in XP, I haven’t used it for a long time.

First of all, you should definitely pay attention to the drivers. In their absence, no setting will help. you will not be able to turn on the microphone in any way.

NOTE: you can also increase the microphone sensitivity and use other effective options. instructions with description here.

How to test the microphone on a laptop

I will describe the easiest way. Click start, click “all programs” scroll to the bottom and select “standard”.

In this section, find the “Sound Recorder” utility and click on it. A small panel will appear on the desktop.

On the left side there will be an option “start recording”. click. Say a few words and click on it again, only now it will say “stop recording”.

Save it and listen to it. If you hear your voice, it means that the microphone is on. the setting is correct. Success.

How to set up a microphone on a Lenovo laptop

  • How to enable the built-in microphone on a laptop
  • How to check the microphone in a laptop
  • How to set up the built-in microphone in a laptop

Consider the most versatile and simple way to turn on the microphone, regardless of the drivers you have installed and the type of sound card of your computer.

The first paragraph of the step is instructions for Windows 7, the second for Windows XP.

Images are for Windows 7. Win7:

Find the speaker icon in the tray and right-click on it. WinXP:

We go to Start. All programs. Standard. Entertainment. Volume

Right-click on the microphone, select “Enable”.

If the icon has become colored and a check mark appears on it, everything is done correctly. Go to the “Volume” menu (see the first step). We are looking for a slider under the inscription “Microphone”, move it to the desired position (adjust the sensitivity of the microphone).

Good time everyone.

99.9% of modern laptops come with a built-in microphone (by the way, many users, without knowing this, buy a separate external microphone). True, its quality of work is far from always ideal, but nevertheless, for some one-time negotiations it is quite enough.

In this article, I’ll cover (briefly) how you can enable it, and why it sometimes fails. I will also touch on the topic of connecting an external microphone. I think the article will be useful to everyone who wants to start network negotiations.

If you have a problem with the microphone on the headphones (for example, no one can hear you), I recommend that you read this instruction here: https://ocomp.info/kak-proverit-mikrofon.html

Turning on the microphone: what to look for

1) Check the condition of the microphone

This is the first thing I would recommend to start with. The fact is that for most of them, everything is in order with the microphone itself (i.e., it is physically sound), all drivers are installed and the software is in order. but the microphone does not work due to the fact that it is turned off! Or, simply by default, another device is selected as the microphone (which does not transmit sound).

    right-click on the sound icon in the tray and select “Sounds” from the menu (see screenshot below). Alternative option: go to the control panel, in the “Hardware and Sound” section and click on the “Sound” tab;

then open the “Recording” tab and see if there are any devices with the name “Microphone” or “Microphone” (if not, and the microphone is connected. check the device manager, see below). Click on it with the right mouse button and select “Enable” (see example below). If you have multiple microphones installed: Note that the default is the one you want to talk through (see arrow 3).

READ  Lenovo laptop does not turn on black screen

try to say something into the included microphone: you should see a green bar start to “run” (This is all in the same “Recording” tab, see the example below).

By the way, if anyone does not know: the built-in microphone in laptops is usually located above the screen, next to the web camera. See example below.

Where is the microphone usually located on a laptop

2) Is the microphone sealed.

For security purposes, many users tape their laptop webcam (so that no one can spy on them). But along with the camera, the microphone is also glued. as a result, you simply cannot be heard.

Way out: either remove the sticker, or make it smaller so that it covers only the “eye” of the camera.

Addition ! Can they watch me through a webcam? How to protect your device from hacking. https://ocomp.info/zashhita-veb-kameryi.html

Pay attention also to the hole for the microphone: is it clogged with dust, is there any debris, etc.

3) Are the drivers installed on the microphone

To see if a driver is installed for your microphone, you need to use the Device Manager. The easiest way to open it is to press the WinPause Break keyboard shortcut. and in the menu on the left select the link you are looking for.

In Device Manager, expand the “Audio Outputs and Audio Inputs” tab and see if you have any devices named “Microphone”. Please note that exclamation yellow signs should not be “lit” opposite them.

To try updating the driver: select the device, and then in the menu, click on the icon with a green arrow (see screenshot below).

Device Manager. Driver Update

How will a device look like in the task manager for which there is no driver (as an example)

To automatically update drivers on a PC / laptop, I recommend using the Driver Booster program. Detailed instructions here. https://ocomp.info/utilita-dlya-avto-obnovla-drayverov.html

By the way, after installing the driver in the control panel (how to open it) in the “Hardware and Sound” section, a link to its configuration should appear (for example, the Realtek control panel, Smart Audio, Dell Audio, etc.).

microphone, lenovo, laptop

In the driver’s control panel (see a couple of screenshots below), you can fine-tune the sound (filters, surroundings, effects, etc.) and the microphone. By the way, check that it is turned on in the driver settings and its volume level is at maximum.

Smart Audio. setting up the driver (effects, fine tuning of sound, microphone, recording)

Realtek, device type: headphone / microphone / line-in

4) If you want to use an external microphone

When connecting an external microphone (and many people stop at headphones with a microphone), pay attention to the audio outputs on the laptop. Now you can find 2 different options: headset jack (on newer devices), and classic (see photo below). The headset jack has a distinctive icon: headphone and microphone.

Classic (left) and headset (right) jack (s)

The bottom line is that if you connect a microphone with a classic plug to the headset jack (or vice versa), most likely it will not work for you (although there are exceptions). Please note that they even have plugs with a different number of contacts (the headset has 4 of them).

Headset plug (left) and classic plug (right)

If it so happens that you have a headset jack on your laptop (for example), and you bought ordinary computer headphones with a microphone (with a classic plug), then just buy an adapter. There are a lot of them now, and you can find them for almost all cases (one of them is shown in the photo below).

Adapter for connecting classic headphones with a microphone to the headset jack

Nowadays, we are used to communicating via video communication, actively using voice communication. With the help of it, people conduct video courses, video lessons of various kinds, and so on. Correct microphone setup on the device we are using plays an important role in this process. Now we will take a closer look at how to turn on the microphone on a personal computer (PC) with Windows 7 and Windows 10 systems.

First you need to connect your microphone to your computer. To do this, insert the microphone plug to the desired connector in the system unit. If you are using, for example, the built-in microphone in a laptop, then you do not need to connect anything. The microphone is connected to the PC through the “Sound” system tool. Now let’s go directly to the connection methods.

Step 1. Right-click (RMB) on the speaker icon in the notification area (system tray). A list opens where we select “Recorders”.

Step 2. The following window of the “Sound” tool opens. Go to the “Recording” section. If you see a message stating that no sound devices were found, then right-click any empty space in the window. A list will appear where we select “Show disabled devices”.

Step 3. If all the actions were correct, then the names of the devices that are connected to the PC should appear.

Step 4. Right click on the microphone that we are going to use. In the new window, select “Enable”.

microphone, lenovo, laptop

Step 5. A check mark will appear next to the active microphone, which indicates that it is on. Done! You can use the microphone as intended.

However, there are times when the above steps do not help. This indicates that you need to update the driver. The microphone must be accompanied by a special installation CD with drivers. It must be inserted into the drive and follow the instructions that will be displayed on the screen. But even if this method did not help, then there is an alternative:

Step 1. First, let’s use the WinR keyset. A window will open where we enter the following:

Step 2. The “Device Manager” will start. Click on the item “Sound devices”.

Step 3. In the drop-down list we find the name of our microphone, right-click on it and select “Update drivers”.

Step 4. A window will open where we select “Automatic search”.

Step 5. After that, the driver will be searched for and installed. Then we restart the computer. The microphone should now start working.

Note that specialized software can be used to install and update drivers automatically. For this, a program such as DriverPack Solution is a good choice.

Step 1. Click “Start”. “Control Panel”.

Step 2. Go to the “Hardware and Sound” section.

Step 3. Next, select the item “Sound”.

Step 4. We see the window already familiar to us, where we click on the “Record” section.

Step 5. Next, follow the instructions provided in Method 1 (Step 2). After which the microphone will start working.

Done. We have studied ways to turn on the microphone on a laptop with Windows 7 and 10 operating systems. There is practically no difference between them, the activation algorithm is the same. There are two ways to switch on. Choose the most convenient one and follow the instructions. Good luck!

How to set up a microphone on a Windows 10 laptop

This small guide will guide you through setting up a microphone on an HP, asus, sony, lenovo, acer, Samsung or toshiba laptop with Windows 10.

In particular, you will learn how to configure, what to do if it does not work, how to install a driver, enable and, if not needed, then disable and even turn up the volume.

I will not touch on technical issues in this post, only software.

On the hardware side, you always have the option to use an external microphone in your laptop.

How to mute the microphone on a Windows 10 laptop

There is nothing to describe how to disable. Check out the section above and do the opposite.

If, of course, there are other options, then these two will be enough for everyone.

How to enable microphone on Windows 10 laptop

To turn on click on the speaker icon in the tray RMB and click on the line “recording devices”.

Then right-click on the device you need, and if you see the word “enable”, then click on it.

NOTE: sometimes you may need to enable it in the device manager, then click “enable” as in the picture below.

Windows 10 Laptop Microphone Driver

The microphone in a laptop will not work without a driver. With this, the truth is almost never a problem.

It is installed along with the operating system. You can see him in device manager.

READ  Connect laptop to Samsung TV via wi-fi

If you suddenly need to install a driver or update, then you should not do it through the device manager, but it is better to use the website of the manufacturer of the control panel, sound card or in this quick way.

Microphone not working on Windows 10 laptop

If the microphone in the laptop does not work, then Windows 10 has an excellent tool to restore it to work.

To use it open control panel and go to the section: “troubleshooting”.

Then find the line “Troubleshoot audio recording” (subsection hardware and sound).

Click on it, and the system will perform a check and, if possible, everything that does not work will fix it on its own.

System settings

Rather, as a supplement to the first method, in case of any problems during the use of the device, it is necessary to diagnose the equipment for various kinds of problems. Any problems with the microphone are the main reason for parsing parameters for incorrect settings. This applies equally to both the built-in and the external device.

We advise you to use the special instructions regarding all system methods for setting microphone parameters using the example of using Windows 10.

Using Realtek HD

Any sound recording device can be easily configured not only with the previously scheduled system tools, but also with a special program that is installed automatically along with the sound driver. In this case, we are talking directly about the Realtek HD Manager.

You can open the window of the desired program using the standard Windows control panel by selecting the item “Realtek HD Manager”.

In the case of the initial launch of the dispatcher, by default you will be prompted to designate the device used as the main one, with the ability to remember the settings.

Setting up sound recording equipment is performed on a special “Microphone” tab in Realtek HD Manager.

Use the parameters provided to tune and then calibrate the incoming audio.

After making the appropriate settings, your recorder should be able to capture sound satisfactorily.

Setting up a microphone for recording

This method is a direct addition to all the material presented in the course of this article and is aimed at setting settings in individual programs. This refers to software created for the purpose of performing sound recording tasks.

The most prominent example of independent recording settings is the corresponding parameters within Bandicam.

This software is designed for recording video clips with sound capture in the Windows operating system, and therefore, due to lack of experience with the program, difficulties may arise.

You can find similar parameters of sound recording equipment in other software, the list of which you can find at the link below.

Following the previous guidelines will help you solve problems with recording audio through a microphone.

Skype settings

Today, the most famous application for communicating over the Internet is Skype, created by Microsoft. Due to the same developer, this software has very similar microphone parameters to the system settings of the Windows operating system.

How to add an External Mic to a Lenovo Laptop

The version of Skype for mobile devices does not differ much from the computer version, and therefore this instruction may also be relevant.

When using Skype, you may have difficulty with your recording equipment, even when it works perfectly with other software. If such problems arise, you should study the special instructions in detail.

Problems with this software vary, and therefore it is extremely important to pay attention to specific problems.

As a general solution to the difficulties with recording equipment in Skype, you can study the detailed article on setting parameters for incoming sound.

Once you’ve successfully resolved your difficulties, you can use Skype’s built-in sound calibration tools. We also talked about this in more detail in a specially created instruction.

In addition to all that has been said, in a number of cases, especially if you are a beginner, malfunctions of a sound recording device may be due to the fact of its disabled state.

It is important to make a reservation that when setting the correct sound parameters in Skype, general software problems can become an obstacle. How to get rid of them and prevent similar difficulties in the future, we told in one of our early articles.

Microphone Settings for Virtual Meetings on Your ThinkPad | Lenovo PC

Turning the device on and off

This method allows you to turn the built-in recorder on or off. This approach is directly related to setting up the microphone, since when connecting new equipment, the system often works by default all the same with the basic.

Controls in different versions of the Windows operating system do not differ much from each other.

To understand the process of turning on and off the recording device, we recommend that you familiarize yourself with the special instructions on our website.

How to set up a microphone on a laptop

The microphone is an essential part of performing some sort of task, which usually includes recording and Internet communication. Based on this, it is easy to guess that this device requires setting some parameters, which we will discuss later in this article.

Microphone setup

If the previous option did not give results, then it is worth checking the microphone settings.

  • Find the speaker icon in the tray and open the context menu on it.
  • Select “Recorders”.
  • If the microphone is not in use, enable it in the context menu. If everything is fine, open the element by double-clicking the left mouse button.
  • In the “Levels” tab, set “Microphone” and “Levels” above zero and apply the settings.
  • Troubleshooter utility

    First, you should try to look for problems using the system utility. If she finds a problem, she will automatically fix it.

    In the category, open the item “Find and fix problems”.

    In Hardware and Sound, open Troubleshoot Sound Recording.

    After finishing you will be provided with a report. You can view its details or close the utility.

    Additional microphone settings

    You can also try to adjust the “Format by default” or disable “Exclusive mode”.

      In “Recorders” in the context menu of “Microphone” select “Properties”.

    Go to “Advanced” and in “Format by default” toggle “2ch, 16-bit, 96000 Hz (studio quality)”.

      In the same tab, disable the option “Allow applications”.

    If you have the item “Enable additional sound tools”, then try to disable it.

    How to troubleshoot a microphone not working issue in Windows 10

    Windows 10 can often run into problems. This is due to the fact that the OS is just evolving. On our site you can find solutions to the most common problems. Directly in this article will describe tips for correcting problems with the microphone.

    Solving microphone problems on a Windows 10 laptop

    The reason why the microphone on a computer or laptop does not work may lie in drivers, software failure or physical breakdown, often updates that this operating system receives quite often become the culprit. All these problems, except for natural damage to the device, can be solved with system tools.

    Lenovo laptop microphone not working on Windows 10

    Reinstalling Drivers

    This option should be applied when conventional methods have not yielded results.

      In the context menu “Start” find and run “Device Manager”.

  • Expand “Audio Inputs and Audio Outputs”.
  • In the “Microphone” menu, click “Delete”.
  • Confirm your decision.
  • Now open the Action tab menu, select Update Hardware Configuration.
    • If the device icon has a yellow exclamation mark, it is most likely not active. This can be done in the context menu.
    • If all else fails, you should try updating your drivers. This can be done using standard tools, manually or using special utilities.

    This is how you can fix the microphone problem on your Windows 10 laptop. You can also use a restore point to roll back your system to a stable state. The article presented easy solutions and those that require a little experience. If none of the methods worked, the microphone may be physically out of order.