How to reinstall system on ipad

Instructions for flashing iPhone or iPad

Hello everyone, dear lovers of iOS gadgets. Today we will touch on the topic. how to reflash an iPhone (4s, 5, 5s, 6) or iPad (2, 3, 4, Mini). To reflash means to update, reinstall the operating system on the iOS device. The process of updating a mobile iOS gadget may be needed when various problems arise with the iPhone (4s, 5, 5s, 6) or iPad (2, 3, 4, Mini). Re-flashing can solve some problems if your gadget is unstable.

This is done very simply, all the work takes place in three stages:

  • Uploading the firmware file. At this stage, you will need to select and download a file with the required firmware versions for your iPhone (4s, 5, 5s, 6) or iPad (2, 3, 4, Mini). Basically, you can: both install an updated version of the operating system, and return the old version (but not too old). I want to say right away that it will not work to return the old version of iOS (older than iOS 7), since Apple has stopped signing and activating early versions of iOS.
  • Setting up iTunes to work. You will be re-asking your device using iTunes. This program is used to control your iPhone (4s, 5, 5s, 6) or iPad (2, 3, 4, Mini) from a personal computer. The program is very easy to use and distributed free of charge.
  • Re-flashing. Well, in fact, the process of flashing itself. The program will do most of the work for you, you just have to sit and look at the process of flashing your gadget.

So let’s take a closer look at each of the above points.

Setting up iTunes to work

Before you move on to flashing your device, you need to download, install and configure iTunes:

  • First of all, go to the link. Apple.com/iTunes/download and download the latest version of iTunes. Run the downloaded file with the program and install the program.
  • Connect your gadget to a personal computer using a USB cable. Launch iTunes.
  • In the side menu (if the side menu is not visible, you need to press the CTRLS key combination) in the “Devices” field, select your gadget that was previously connected to a personal computer.

Before you start reflashing your gadget, I recommend making a backup copy of your operating system settings. To do this, you need to do a few simple steps:

  • Connect the gadget to a personal computer using a USB cable.
  • Launch the iTunes program (if the program did not start automatically after connecting) and in the side menu (if the side menu is not displayed, you simultaneously press the CTRLS keyboard shortcuts) select your iPhone (4s, 5, 5s, 6) or iPad (2, 3, 4. Mini).
  • Go to the “Browse” tab, find the “Create a copy now” button and click on it with the left mouse button.

In the next step, we will go to the lesson and try to reflash your gadget.

Uploading the firmware file

First, we proceed to download the file with the firmware version you need. It is very easy to do this, follow these steps:

  • Go to www.getios.com. In the field “Your device” select the name of your device.
  • In the second step, you need to select your device model. To select, use the drop-down list with the name “The Model”.
  • In the third step, you need to select the version of the iOS operating system that you want to install on your mobile gadget iPhone (4s, 5, 5s, 6) or iPad (2, 3, 4, Mini).
  • Next, click the “Download” button. The download of the file with the firmware will start, the file size, depending on the selected iOS version, may take several gigabytes.

Save the downloaded file with the operating system to your desktop or to the folder you like to save to.

Flashing

Moving on to flashing iPhone (4s, 5, 5s, 6) or iPad. To do this, follow these steps:

  • Hold down the SHIFT key (if you have Windows) or ALT (if you have a Mac) and left-click on the “Restore iPad” button.
  • In order to reflash the device, in the window that opens, select the previously downloaded file with the firmware.

After the above steps, the process of updating the software on your iPhone (4s, 5, 5s, 6) or iPad (2, 3, 4, Mini) mobile gadget will begin.

After a certain amount of time, the process of flashing your iPhone or iPad (2, 3, 4, Mini) will be completed. That’s all for today, I hope this little note helped you and you could easily reflash your iPad (2, 3, 4, Mini) or iPhone (4s, 5, 5s, 6) mobile gadgets. If you have any problems when flashing the gadget, then you can describe your problem in the Комментарии и мнения владельцев to this post. In order to be able to leave Комментарии и мнения владельцев, you need to log in to the social network.

Important.

This often leads to the so-called “eternal apple” or “eternal loop” in recovery mode (Music (or computer) icon with a cable on the screen).

Always use Computer Recovery to flash your iPhone, iPad or iPod Touch with jailbreak.

How Update is Different from Recovery?

During the firmware update process, all data (applications, photos, contacts, etc.) on the iPhone or iPad is saved.

When restoring, the device will receive “factory settings” (clean system), while ALL user data will be deleted.

How to update iOS (iPadOS) on iPhone, iPad or iPod Touch “over the air” using Wi-Fi?

The most common way to update an iPhone or iPad is by downloading the firmware directly to the device over the air using a Wi-Fi connection.

READ  How to change the language on the ipad keyboard

To download and install an iOS or iPadOS update:

Make sure the device being upgraded is 50% or more charged.

Open the Settings app, go to the General section, and then select Software Update.

Click the “Download and Install” or “Install” button link if the update was downloaded earlier.

Note. If your iPhone or iPad doesn’t have enough free space to download an update, a message may appear stating that you can temporarily remove programs to free up memory. Once the iOS or iPadOS update is installed, the uninstalled apps will be reinstalled.

How to set up automatic updates for iOS or iPadOS over Wi-Fi

An iPhone or iPad with iOS 12 or later can be set to update automatically. To do this, open the “Settings” application, go to the “General” section, select the “Software update” item, and then click “Auto update” and set the corresponding switch to the Enabled position.

»And follow the instructions on the screen.

Is it possible to downgrade (rollback) the version of iOS or iPadOS firmware on iPhone and iPad?

Not. Officially, Apple does not allow installing iOS versions other than the current one.

However, there is a so-called “time window” in which within a few weeks after the release of the latest firmware, users will be able to install the previous version of the software.

Also an exception is the ability to rollback to the latest official version of iOS from the beta version of the firmware installed on the device. We talked about how to install test firmware without a developer account here.

It should be noted that from time to time, hackers still release various software that allows them to downgrade the iOS version. However, in most cases, firmware rollback is only possible on older iPhones and iPads.

Why you need to reflash your iPhone or iPad?

The main purpose of restoring an iOS device is to reset it to factory settings with an upgrade of the software version (iOS firmware). Flashing (recovery) is usually performed:

  • if there is a software failure of the iOS device;
  • in order to install the latest version of iOS;
  • in case the user has forgotten the screen lock password (code) (not to be confused with Apple ID Activation Lock)
  • to create a “clean system” (for example, when changing the owner of the device or for the purpose of the subsequent jailbreak procedure).

If you need to select an IPSW firmware file

If you need to restore your iPhone or iPad to a version different from the current one, for example, from the latest beta version to an older but official firmware, then download the IPSW firmware file for your device (link).

Then, while holding Shift on the Windows keyboard, click on the Restore button (for Mac, hold down Alt (⌥Option) and click on the Restore button).

In the window that appears, select the IPSW file of the firmware downloaded earlier and click Open. The recovery process will begin.

How to reinstall iOS on iPad?

Important guidelines for recovering Apple devices

The iPhone and iPad recovery process can only be performed using a computer using iTunes.

Apple does not allow you to install a different version of iOS on your device. There is an exception to this rule, which has received the name “Time Window” among users. This concept defines the period of two weeks (in some situations it changes) after the firmware update, during which the user can “roll back” the iOS version to the previous.

Important: This rule does not apply to beta versions of iOS firmware. If a test version of the software is installed, at any time the owner of the device has the right through iTunes to restore it to the latest official firmware version.

Flashing iPhone or iPad in DFU mode

Recover Apple devices using DFU mode as follows:

  • Connect your smartphone or tablet with a computer running iTunes using an original USB cable;
  • Put your iPhone / iPad into DFU mode. To do this, simultaneously hold down the Home and Power On / Off buttons. You need to hold them for about 10-15 seconds until the screen of your smartphone or tablet turns black. After about a second after the screen went out, release the On / Off button of the device and continue to hold the “Home” button for another 15 seconds. After that, the device will enter the DFU state, which will be notified by the iTunes application;
  • Next, select the icon of the device to be restored in iTunes;
  • Press the “Restore iPhone” or “Restore iPad” button while holding down the Shift button (if you are using a Windows computer) or the Alt button (if you are using a MAC);
  • A window will open for selecting the IPSW file of the device firmware, which must be launched, after which the restoration of the smartphone / tablet will begin.

IPhone / iPad recovery time will vary depending on smartphone model, computer speed and other factors. The procedure usually takes no more than 10 minutes.

(408 votes, 4.56 out of 5) Loading

IPhone Flashing Methods

You can reflash the iPhone in 2 ways, one of them is universal, i.e. is used for both recovery and update, the second is used for update only:

How To Reset & Restore your Apple iPad Pro 3rd Gen. Factory Reset

  • IPhone firmware via iTunes;
  • Updating iOS on iPhone over Wi-Fi.

In the first case, the software is downloaded to the computer and, using the iTunes media combine, it is downloaded directly to the iOS device. Relevant for iOS 4.3.5 inclusive. For iOS 5 and higher, the second method is possible, which implies updating iOS directly from the device via the Internet over a wireless network (Wi-Fi).

What is the difference between restoring iPhone and updating?

As we already said, restoring or updating an iPhone refers specifically to the software component of the device.

Restoring iPhone is the process of restoring your device to its original settings. When restoring, all content (photos, videos, music) and personal data (phone book, calendar information) will be deleted from the iPhone, the device settings will be reset to factory settings.

In a nutshell, restoring an iPhone is a factory reset and a clean iOS installation with the latest version.

Updating an iPhone refers to the process of moving from an older version of iOS to a newer one. As a result of the update, all content, personal data and settings will remain intact and iOS will be updated to the new version.

As you can see, the fundamental difference between restoring and updating an iPhone is only that as a result of the update, content and personal data are not deleted from the Phone.

Restore iPhone = Delete Content Reset Settings iOS Update

As you know, the iPhone, like any other iOS device, can be in several modes provided by the manufacturer: normal mode, recovery mode (Recovery Mode) and firmware update mode (DFU Mode).

It is possible to restore or update an iPhone in the following modes:

  • in normal mode;
  • in Recovery Mode;
  • in DFU mode.

Reinstalling iOS using iTunes

Installing iOS firmware using iTunes is as follows:

  • connect iPad to computer and sync it with iTunes;
  • make backup copies of important data (contacts, photos, applications, and so on);
  • go to the tab of the program “Overview” and click on the item “Check for updates”;
  • wait until the end of the search for the latest version of iOS and click “Download and Update”.
READ  Music making software for ipad

Important! In order to avoid various errors before installing iOS, you should update iTunes to the latest up-to-date version, and also make sure you have a stable Internet connection. Also read on how to get your old iOS system back if the new one isn’t quite right for you.

How to do a full wipe and reinstall of iOS

Manual iOS installation on iPad

To install the iOS firmware manually, we need:

  • the tablet itself and the cable for connecting it to the computer;
  • the latest version of iTunes installed;
  • pre-downloaded iOS firmware.

This method is suitable if there is no Internet access or it is too “slow”. Of course, the firmware in the ipsw file format must be downloaded in advance and saved on the computer. It is better to download iOS from the official Apple website, which will avoid a lot of errors during its installation.

The installation process is as follows:

  • launch iTunes and connect the tablet to the computer;
  • after synchronization, go to the “Overview” tab and click the “Update” button while holding down the “Shift” key;
  • select the saved firmware file and click the “Open” button;
  • the program will warn you about the start of the update process, click “Update” and wait for the end of the process.

How to reinstall iOS on ipad

That is why the question of how to install iOS can arise before any user of an apple mobile device.

reinstall, system, ipad

IOS installation can be done in three main ways:

  • by updating the system via Wi-Fi;
  • updating the firmware using iTunes;
  • manual method.
reinstall, system, ipad

Set up updates on iPad

Now you know how to install the iOS firmware, however, after installing it, you need to make certain settings, similar to the process of activating a new device. The tablet will also offer to set up iCloud, App Store and iTunes Store services, as well as geolocation (this requires Wi-Fi). You can skip this step.

If you are interested in this system, then it would be a good idea to read about iOS app development. Also find out which is better than Android or iOS.

A factory restore erases data and settings on your iPhone, iPad or iPod and installs the latest version of iOS, iPadOS, or iPod software.

Uploading the firmware file

First, we proceed to download the file with the firmware version you need. It is very easy to do this, follow these steps:

  • Go to www.getios.com. In the field “Your device” select the name of your device.
  • In the second step, you need to select your device model. To select, use the drop-down list with the name “The Model”.
  • In the third step, you need to select the version of the iOS operating system that you want to install on your mobile gadget iPhone (4s, 5, 5s, 6) or iPad (2, 3, 4, Mini).
  • Next, click the “Download” button. The download of the file with the firmware will start, the file size, depending on the selected iOS version, may take several gigabytes.

Save the downloaded file with the operating system to your desktop or to the folder you like to save to.

Restoring the device to factory settings

  • Click “Recover [device]”. If you are logged into Locator, exit it before clicking Restore.
  • Click “Restore” again to confirm. After that, using a computer, all data from the device is erased and the latest version of iOS, iPadOS or iPod software is installed.
  • After restoring factory settings, the device will restart. Now you can set it up as new.
  • Hello everyone, dear lovers of iOS gadgets. Today we will touch on the topic. how to reflash an iPhone (4s, 5, 5s, 6) or iPad (2, 3, 4, Mini). To reflash means to update, reinstall the operating system on the iOS device. The process of updating a mobile iOS gadget may be needed when various problems arise with the iPhone (4s, 5, 5s, 6) or iPad (2, 3, 4, Mini). Re-flashing can solve some problems if your gadget is unstable.

    This is done very simply, all the work takes place in three stages:

    • Uploading the firmware file. At this stage, you will need to select and download a file with the required firmware versions for your iPhone (4s, 5, 5s, 6) or iPad (2, 3, 4, Mini). Basically, you can: both install an updated version of the operating system, and return the old version (but not too old). I want to say right away that it will not work to return the old version of iOS (older than iOS 7), since Apple has stopped signing and activating early versions of iOS.
    • Setting up iTunes to work. You will be re-asking your device using iTunes. This program is used to control your iPhone (4s, 5, 5s, 6) or iPad (2, 3, 4, Mini) from a personal computer. The program is very easy to use and distributed free of charge.
    • Re-flashing. Well, in fact, the process of flashing itself. The program will do most of the work for you, you just have to sit and look at the process of flashing your gadget.

    So let’s take a closer look at each of the above points.

    How to reinstall software on iPhone?

    How to update iOS (iPadOS) on iPhone, iPad or iPod Touch “over the air” using Wi-Fi?

    • Make sure the device being upgraded is 50% or more charged.
    • Open the Settings app, go to the General section, and then select Software Update.

    How to Reset iPhone 4s Completely?

    How to factory reset iPhone or iPad

    • Back up important data If you want to keep your personal information, back up your iPhone or iPad locally to your computer using iTunes and / or a cloud copy to iCloud.
    • Perform a reset Go to “Settings” → “General” → “Reset” and click “Erase content and settings”.

    Can iPad 4 be upgraded to iOS 11?

    The owners of the iPhone 5, iPhone 5c, iPad 3 and iPad 4 will not be able to install the iOS 11 operating system on their devices. The reason for this is the 32-bit processor used in them, which the Apple corporation refused to support this year.

    Is it possible to install iOS 10 on iPhone 4s?

    Can iOS 10 be installed on iPhone 4s, iPhone 5, iPad 2, 3, iPad mini? … The iOS 10 update is compatible with most iPhone, iPad and iPod Touch models that can run iOS 9, except for iPhone 4s, iPad 2, iPad 3, iPad mini and 5th generation iPod touch.

    How to Factory Reset iPhone without Passcode?

    To do this, follow these steps:

    • Go to the device menu in the “Settings” “General” “Reset”.
    • Click “Erase Content and Settings”.
    • Enter your device password or Apple ID password to confirm.

    Reinstalling from a USB flash drive

    You can also use the installation media to reinstall a Mac OS from scratch on a MacBook:

    READ  Is it possible to connect a mouse to the ipad

    How to clean install macOS Catalina

    macOS Catalina, for the release of which we carefully prepared, is now available for download.

    There are several ways and reasons to install a new macOS from scratch, but first things first.

    Transferring a copy to another device

    Apple products have special technologies that allow you to transfer both the operating system and all data from one device to another. To do this, use the Migration Assistant utility. To complete the entire action, you will need two devices: a MacBook acting as a donor and a receiving computer.

    They need to be connected to each other using a cable, wireless or local area network. Next, you need to close everything on both devices and start the transfer assistant. A window will immediately open with three options for importing data. The answer choices must be the same on both computers. Then you need to enter the security code.

    It remains only to choose what exactly needs to be transferred from one device to another. The user needs to tick the necessary.

    How to factory reset Macbook, iMac, Mac mini, Mac Pro (how to reinstall macOS)

    Make sure you have an Internet connection (for the subsequent installation of macOS), as well as an electrical connection in the case of a MacBook.

    Attention! Further actions will lead to the complete deletion of ALL data on the Mac. save the necessary information on an external medium in advance;

    Restart your computer (or turn it on if it was turned off) using the menu  → Restart;

    During the reboot process, press and hold the key combination that suits you best:

    ⌘Cmd R. installs the version of macOS that was running on the computer before the problems occurred. Those. your Mac will install exactly the same version as before.

    ⌥Option (Alt) ⌘Cmd R. Upgrade to the latest macOS version your Mac is compatible with. For example, if the “Mac” was running on High Sierra, and the breakdown occurred after the final build of macOS Mojave was released, the system will download and install Mojave from the Web.

    ⇧Shift ⌥Option (Alt) ⌘Cmd R. install the version of macOS that was originally installed on the computer (or the closest version available).

    Note: macOS Sierra 10.12.4 or higher is required.

    The macOS Utilities window then appears (may be referred to as macOS Utilities on versions earlier than macOS High Sierra). Here you need to select “Disk Utility” and click “Continue”;

    reinstall, system, ipad

    Checking and fixing boot disk errors (recommended)

    Select your drive in Disk Utility from the menu on the left (usually Macintosh HD, it is at the very top).

    Click on the First Aid label.

    Click Start. The application will check the boot disk for “health status”, ie. performance and will correct any errors. This process may take a while.

    When the verification is complete, click Finish.

    In the Disk Utility application, select the verified boot disk, go to the “Erase” section (at the top of the screen);

    From the “Format” menu, select APFS (for computers with macOS Sierra and an older version of the OS, select Mac OS Extended) and click “Erase”;

    When the disk formatting process is complete, click Finish to exit Disk Utility.

    Reinstalling macOS (Factory Reset)

    Reinstall macOS using the appropriate item (screenshot below) and follow the instructions. The latest version of macOS will be downloaded from the Internet and the process of reinstalling macOS will begin. During this time, the computer may restart.

    Note: If you install from scratch, you will have to reconfigure your Mac and software settings.

    With its own pre-installed operating system Mac OS. Like all products of the company, it claims exclusive quality, the use of advanced technologies. At the moment, the following varieties are on sale:

    • MacBook;
    • MacBook Air;
    • MacBook Pro.

    How to update your Mac OS. in the article below

    MacBook Pro is available in 13- and 15-inch sizes and in a variety of specifications. All Mac models have Intel processors with up to 10 or 12 hours battery life.

    The newest operating system currently used on Mac computers is Mac OS Sierra. Older OS versions can be upgraded free of charge over the Internet. The company’s main advantage of the system is that it was created specifically for Mac hardware. Unlike Windows, which is installed on computers of various manufacturers. By the way, now MacBook Pro and other models support the ability to install and Windows.

    MacBook Pro and others are sold pre-installed. However, in some cases, you may need to install or reinstall Mac OS on your MacBook. It is necessary to distinguish between the terms:

    • An installation is also called a “clean” installation, which is performed on a blank (formatted) hard disk or on a new.
    • Reinstallation is when a new system is installed over an old one without full formatting and preserving user data.

    The need to install and reinstall the Mac OS arises in case of serious malfunctions in its work, an unsuccessful update. Like Windows, it still leaves trash behind, which over time leads to slowdowns, freezes and other troubles. We will consider these processes using the example of the latest operating system, namely Mac OS Sierra. For previous versions, for example Mac OS X, in fact, there will be no differences, but it is still recommended to update to the latest version if your device supports it.

    Recovery via Time machine

    To do a factory restore via Time machine, you need to restart your computer and press one of the keyboard shortcuts from the first method. Then choose recovery.

    It is important to understand that this method is only suitable if the copy was made in advance. In the absence of her, nothing will work.

    The reasons

    Most often this happens due to the fault of currently running applications and processes that do not have support for OS X El Capitan. Another reason is the incompatibility of applications with System Integrity Protection.

    Clean install macOS: preliminary steps

    IMPORTANT: Before you clean install (reinstall, flash, factory reset) your Mac, be sure to check:

    • Is the Mac linked to your Apple ID and not to any other
    • Do you remember the credentials (login and password) of your Apple ID. You can check, for example, by logging in (from a computer).

    The fact is that if the Find Mac function was activated on Mac (located along the path: System Preferences → iCloud → Find Mac), then after reinstalling the system (reset to factory settings), the system will ask you to enter the Apple ID to which the device is linked.

    • How to find out (see) which iPhone, iPad, Mac are linked to Apple ID.
    • How to Recover (Reset) Forgotten Apple ID Password for iCloud, iTunes and App Store.
    • What is removed if you sign out of iCloud on iPhone, iPad and Mac?

    Symptoms

    After downloading the OS X El Capitan installer from the Mac App Store and launching it, an error occurs interrupting the installation process.