How to put a button on an iPhone on the screen

Table of Contents

How to answer a call on an iPhone?

Press “Accept” to answer the call. If iPhone is locked, drag the slider. You can also press and hold the center button on the headphones.

How to drop a call?

Android. To drop an incoming call, you can press the power button and the call will be dropped.

How to properly launch iPhone?

  • Insert an activated compatible SIM (iPhone 3GS), Micro-SIM card (iPhone 4, iPhone 4S), or Nano-SIM card (iPhone 5) into your iPhone.
  • Press and hold the power button for a few seconds to turn on the iPhone. Follow the onscreen instructions to set up and activate your iPhone.

Where are the special features on the iPhone?

Accessibility on iPhone and iPad

  • Go to the “Settings” application of the iOS 7 operating system:
  • Go to the “Basic” section:
  • Go to the “Universal access” menu. it is in this menu that the settings of all accessibility features are concentrated:

How to display the home button on iPhone?

Displaying the “Home” button directly on the screen of the iOS device!

  • Go to the iPhone or iPad settings. open the main ones. universal access.
  • Almost at the very bottom of the list, we find the item. AssistiveTouch, go into it and activate the function by moving the slider.

How to enable a disabled iPhone?

Press and hold the top button until the Power Off slider appears. Move the slider and then wait 30 seconds for the device to turn off. To turn the device back on, press and hold the top button until the Apple logo appears.

How to lock the iPhone screen from children?

How to lock the iPad screen from taps for kids?

  • Settings
  • The main
  • Universal access
  • Guide access
  • Move the slider to the “Enable” position
  • Set a password

How to Display Home Button on Samsung Screen?

How to set the application screen button

  • Go to the “Settings” menu.
  • We select “Display”. “Main screen”.
  • We find the item “Application screen button”.
  • Select “Show Application Screen Button”, and then click “Apply” at the top right.

Why does the Home button not work on Samsung?

If you are faced with the fact that the Samsung Galaxy Home button does not work (the “home” button does not work), then in most cases this is caused by the previously mentioned falls, mechanical stress, but also the ingress of water (or dirt, dust), which leads to malfunctions of the Home button loop and, as a result, it does not respond

How to add a home button to your screen?

We go along the path “Settings”. “System”. “System navigation”. Open the navigation button settings. Now you need to move the toggle switch to the inactive position, after which “Home” will no longer appear on the screen of the Android device.

How to lock the screen on iPhone?

If you haven’t already turned on AssistiveTouch first, go to Settings. General. Accessibility. AssistiveTouch. Next, in the AssistiveTouch menu, find 3D Touch. In the list that opens, select Lock Screen. Done!

READ  Record video from iPhone phone screen

How to unlock iPhone without pressing a button?

How to unlock iPhone or iPad with one tap without pressing the Home button (for iOS 13 and newer)

  • Open the “Settings” application;
  • Go to the section “Accessibility” → “Home button”;
  • Activate the “Swipe to open” option.

How to customize the home button on iPhone 6?

  • To set up accessibility shortcuts, go to Settings Accessibility Shortcuts and choose the features you use most.
  • To use the quick command for accessibility, press the Home button three times.

Organizing Reminders with Lists

Want to categorize your reminders like work, personal, or school? Create a list of reminders to keep things organized. You can customize your lists with colors and icons, and share them with others. And the built-in smart lists of the Reminders program allow you to quickly view all reminders across all custom lists.

Create a reminder

  • Open the Reminders app.
  • Tap the list where you want to add the reminder. Click “Add List” if you want to create a new list.
  • Tap New Reminder, then enter your reminder text.
  • Click Finish.

Edit a reminder, receive a notification when sending a message, and add additional information

Click the Change Details button. to add additional information and settings to the reminder, such as notes, URL, and priority. In addition, you can change the notification settings for a reminder and the list to which the reminder applies.

Receive a notification when sending a message to a specific user

Turn on the “Remind me when I send a message” feature if you want to receive a notification when you communicate with a specific user in the “Messages” program.

Turn on the “Remind me when I send a message” function, tap “Select user”, then tap the name in your contacts.

The next time you communicate with this person, a notification from the “Reminders” program will appear.

Adding Notes and URL

Use the Notes field to add useful information to your reminder. If a web page address is associated with this reminder, you can add it in the URL field. Notes and URL appear with the reminder on all lists that the reminder refers to.

Search reminders

Use the search bar above smart lists to find reminders. Reminders grouped into lists appear as you type, containing the keyword.

Press the dictation button. to find a reminder using dictation.

Add a reminder using Siri

You can ask Siri to schedule a reminder on your iOS device or Apple Watch. Here are some examples:

  • Remind me to check my mail when I get home.
  • Remind me to stop by the grocery store when I leave here.
  • Remind me to call Tara tomorrow at 3pm.

Add your home and work addresses to your card in Contacts so you can use Siri to add reminders wherever you go. Open the Contacts app, then click My Card. Click “Edit”, add a work or home address, then click “Done”.

Siri uses location services when you point to a specific location for a reminder. Siri availability varies by language, country, and region. Find out where Siri is supported by country or region.



  • Set up iCloud to keep your reminders up to date across all your devices. Open the Settings app, then tap [your name] iCloud and turn on Reminders. In the Reminders app, you can see all your reminders across all Apple devices signed in with the same Apple ID.
  • Learn more about how to update iCloud Reminders after updating to iOS 13 and iPadOS.

How to create a reminder list on iPhone and iPad

Launch the Reminders app

Click “Add List”

iPhone 6 Plus: How To Enable Touch Screen Home Button on iPhone / iPod (Assistive Touch)

button, iphone, screen

Specify the name of the list and the color of the label

The best part about Apple’s regular to-do list tool is the ability to access tasks scheduled for the near future using a special widget in the Control Center. First, however, this widget must be enabled.

Voice assistant assistance

With the introduction of the voice assistant Siri, creating reminders has become much easier. The assistant can recognize user commands and perform actions with system applications.

On the unlocked screen, hold down the Home button at the bottom of your smartphone. Wait for the Siri page to appear.

Ask to create a reminder. To do this, it is enough to say something like: “Siri, remind me that the meeting will take place on September 3 at 14-00.” The assistant will complete the task by automatically creating a reminder.

READ  How to check iPhone for spyware

The disadvantage of this method is the requirement for a high-speed Internet connection, which is required for Siri to work. And also the lack of the ability to customize repetitions by voice.

How to set vibration on iPhone (enable or disable)?

Sometimes the owner of Apple equipment has to go to the most extreme measures: reset the iPhone DO to factory settings, erase confidential data, or even take the device to a service center to replace parts. Whatever the reasons and methods for solving the problem, the result is the same: at the end, you will have to re-configure the phone, in particular, try to enable or disable vibration. How to do it on iPhone. let’s try to figure it out.

How to turn on vibration on iPhone?

iPhone is a device with an intuitive, but multi-layered interface: a user can achieve similar outwardly goals in different, sometimes very different ways. So, in order to quickly set or remove vibration on the iPhone, it is enough to use the physical button on the end of the case:

  • The user will see a message on the screen that the silent mode is activated. now, if no special restrictions are set in the system, vibration will automatically turn on on the iPhone.
  • By returning the button to its original position, the iPhone owner will return the sound again. and with the default settings, it will turn off vibration.

Doing all this is no more difficult than removing a SIM card from an iPhone; but it’s better to spend a little more time and fully customize your phone.

To turn on vibration on iPhone:

  • Scroll home page down.
  • And open the “Sounds” section. here, in addition to everything, you can put a ringtone on your iPhone.
  • In the “Vibration” field, move the “During a call” slider to the “On” position.
  • And then, if disabled. “In silent mode”: it is he who is associated with the above physical button.

That’s it. the owner of the iPhone was able to turn on vibration. But this is not enough: how to change the “buzz” pattern or create your own, will be described below.

How to set vibration on iPhone?

Setting up vibration on your iPhone is as easy as getting to grips with Touch ID; the user needs:

  • In the “Sounds” section (the “Sounds and vibration patterns” field) select the first item “Ringtone”.
  • Choose any of the “buzzing” patterns presented in the list. by clicking on the headings, the owner of the iPhone will be able to feel the rhythm.
  • And, starting to tap the rhythm on the free field.
  • Fill in the half-minute gap allotted for this. on the scale below, the blows are marked with black dots.
  • When finished, click on the “Save” button.
  • And enter a name for the new scheme, and then tap “Save” again.

Important: in exactly the same way (faster than turning geolocation on or off), the owner of the iPhone can set vibration for all other signals set in the “Sounds” section: from SMS to notifications from and

How to turn off vibration on iPhone?

You can also turn off vibration on iPhone in several ways; the simplest, but not giving a 100% result, is to go to the “Sounds” section again and move the top sliders to the “Off” position.

Suitable option for customizing the signal types built into the iPhone:

  • Open the desired item. for example, “Ringtone”.
  • And set the vibration parameter “Not selected”.

Unfortunately, on the iPhone, you can enable and disable vibration only for a limited list of notifications using the above method. Below we will tell you how to turn off the “buzz” in the three most popular instant messengers; guided by these tips, the user will be able to do the same in any similar application.

To deactivate vibration in the Viber installed on the iPhone, you should:

  • And move the “Vibration in the application” slider to the “Off” position.

In Telegram for iPhone, the process looks different:

  • The iPhone host launches the messenger, goes to “Settings”.
  • Done! To turn off vibration in the application, just move the corresponding slider to the “Inactive” position.

To turn off vibration in Votsap, you should:

  • Open the “Settings” of the mobile application.
  • Follower go to “Notifications” sections.
  • By moving the slider to the “Disabled” position, the user will be able to get rid of the vibration enabled on the iPhone by this application; the operation of other programs will not affect the above actions.

And to completely turn off vibration on the iPhone, not only for incoming notifications and calls, but also for system operations, you will need:

  • Open “Settings” and go to the “General” section.
  • Select the subsection “Universal Access”.
READ  How to minimize apps in 11 iPhone

How to Get Home Button on iPhone Screen

  • And deactivate the only slider located in the new window.

Important: after a complete shutdown, vibration should be turned on in the reverse order. first in the “Basic” section, and then in “Sounds”.

Summing up

The easiest way to turn vibration on or off on iPhone is to use the physical button on the side, or make appropriate adjustments in the Sounds section of the settings. The user will be able to set individual parameters for each system action, as well as create his own “buzz” pattern. You can completely turn off vibration on the iPhone, including for system actions, in another section of “Settings”. “General”.

How to unlock iPhone without pressing a button?

How to unlock iPhone or iPad with one tap without pressing the Home button (for iOS 13 and newer)

  • Open the “Settings” application;
  • Go to the section “Accessibility” → “Home button”;
  • Activate the “Swipe to open” option.

How to remove the navigation button from the screen?

How to remove the on-screen buttons from the Honor / Huawei screen

  • Open the settings.
  • Go to the “System” section.
  • Select the item “System navigation”.
  • Next, in the list that appears, look for the line “Navigation button” and go to it.
  • Click “Enabled”.

How to Display Home Button on Samsung Screen?

How to set the application screen button

  • Go to the “Settings” menu.
  • We select “Display”. “Main screen”.
  • We find the item “Application screen button“.
  • Select “Show Application Screen Button”, and then click “Apply” at the top right.

How to remove a button from the screen on an iPhone?

How to remove the home button from the iPhone screen?

  • Go to “Settings”.
  • Item “Universal access”.
  • Further to the item “Touch”.
  • Find the item “AssistiveTouch”.
  • Turn it off.

How to take a step back on iPhone?

Unlike Android devices, the iPhone doesn’t have a separate back button. But in applications such as Mail, Messages, Safari, you can quickly return by swiping to the left.

How to set up accessibility on iPhone?

accessibility on iPhone. Go from the home screen to Settings. Select. Then enable the features you need.

How to Display Shazam on Screen on iPhone?

In Shazam for iOS or Android, go to Library, then tap the gear icon. On the screen that opens, you can change your Shazam settings: Manage Shazam notifications. To have Shazam start listening automatically when you open it, turn on Recognition on Startup.

How to set the time?

How to set the time, date and time zone

  • On your phone, open the Clock app.
  • Click Settings.
  • In the Clock section, select your home time zone or change the date and time. If you are outside your home time zone and want to show or hide the time in it, click Show time at home.

How to set the clock on the locked screen?

How to set a clock on the lock screen of an Android phone

  • On the main screen, in any free space, make a long press. An additional menu should appear at the bottom of the screen.
  • Click on “Widgets”.
  • Click on the desired widget, then hold it and place it in the free part of the screen.

How to display a large clock on a computer screen?

  • Tap and hold an empty area on the home screen.
  • At the bottom of the screen, select Widgets.
  • Press and hold the widget.
  • You will see images of the main screens. Drag the clock to the home screen.

How to display a widget on the lock screen?

Open Settings Security & Lock and check Enable Widgets.Adding widgets to the lock screen

  • Swipe from left to right across the lock screen to reveal a large plus sign.
  • Tap the plus sign.
  • Tap the widget you want.

How to change the time on the computer screen?

  • Click on the time and date in the lower right corner of the screen.
  • Click “Change date and time settings”.
  • In the window that appears, click “Change date and time”.
  • To find out the exact time and date, use the search.
  • Change the data to correct and click OK.