How to open the cover of Samsung a10

Method to remove cover on Samsung J5 phone

Recently, developers of mobile phones of various brands have begun to create cases in which the back cover is simply absent. In fact, it exists, but it is not possible for ordinary users to open it without special devices. For example, the two parts of the Samsung J5 are glued together. And in order to glue them, the body must be exposed to heating at a temperature of 100 degrees. This will require a hot air gun.

Before opening the case, be sure to remove the cells for the SIM card and flash drive.

The muzzle of the hot air gun must be directed towards the back of the Samsung and its seams. Then you need to arm yourself with a plastic card or a plastic scalpel to pry the front screen module.

The lid is not a thin plastic sheet, as in classic smartphones, but rather a depression in the form of a bath. You should be very careful when working along the seam of your phone with a card. Don’t run it too deep. 0.5 cm is enough. Be careful not to disrupt important phone modules.

When the lid yields, do not rush to open the case completely, do it with caution. After all, both parts exchange information using a wide ribbon cable that connects the screen module and the Samsung motherboard.

To disconnect the ribbon cable, you need to open the mount cover and remove the ribbon cable from the socket. It’s pretty simple. The main thing is not to rush and be attentive.

How to open the back cover on Samsung Galaxy S7 Edge

Let’s take an example of how specialists open non-removable back covers on a Galaxy S7 Edge smartphone. It is much easier to do this when you have special equipment at hand. It resembles an ordinary vise equipped with a large suction cup.

It serves as a holding tool for the back of the case. No hot air gun is needed with this equipment. Since it refers to methods that have a certain share of the risk of breaking Samsung with high temperatures.

  • In the middle there is a niche for a telephone. A body is placed between two rubber vise holders;
  • The cover of the device closes and the suction cup is activated. It is attached to the back of a Samsung smartphone. The joints must be moistened with alcohol or an alcohol-containing solution;

Ultimately, the glue between the parts of the case yields and the device is disassembled into two main parts. the back cover and the Samsung mobile phone module. When the cover comes off the module, you do not need to immediately open the fixture. It is necessary to remove the suction cup from the body, after which you can open the machine.

How to open the back cover of a Samsung phone

Let’s find out in what ways you can open the back cover of your Samsung mobile phone. No mobile phone is complete without a SIM card. This is a small chip that provides us with cellular services. On some Samsung models, you need to remove the cover to gain access to the slot where the chip is inserted. And also Micro-SD. a flash drive for a mobile device. Or get to the motherboard for repair.

Removing the cover with the tools at hand on the Samsung Galaxy S9

The more popular model Samsung Galaxy S9 practically does not differ in the process of disassembling the case from other models. Here, everything is also glued together, the engineers at Samsung decided. But we will consider manual disassembly of the device, without any special tools. We will use the tools at hand that are in every home. For example, instead of a hot air gun, you can use a regular hair dryer to dry your hair. But use it to its fullest. Direct the hot air flow exclusively at the joints of the case.

It is necessary to warm up the glued joints with a hairdryer for a few minutes. A suction cup is also required to safely remove the back cover.

    Attach the suction cup to the top or bottom of the Samsung Galaxy S9 case. Gradually start pulling the cover away from the screen module. It’s nothing that at first she won’t give in. Do this regularly but effortlessly. After a while, a gap will begin to appear between the body and the lid;

Malfunctions and their elimination

If you purchased a device and it does not function, the first step is to follow these steps:

  • Read the instruction manual carefully;
  • Make sure the device is compatible with this TV model;
  • Disconnect the batteries and put them back;
  • Remove the power plug from the outlet, wait a couple of minutes, plug it back in and turn on the TV.
READ  How to connect headphones to your Samsung Galaxy phone

The disadvantage of Samsung Smart Touch remote control devices is that repairs are not carried out in official service centers. The cost of the original remote control sometimes reaches a third of the cost of the entire TV set. Therefore, most users try to repair the remote themselves. A common problem is the gradual increase in the rate of discharge of the batteries, and in the end, the remote does not work at all even with new batteries. This is facilitated by the malfunction of the capacitors at the positive input. To solve the problem, you can simply remove them, but this does not guarantee the safety of use, however, without them, the remote control will begin to function normally.

What you need to do

In the process of parsing, you need to have a few simple tools at hand:

The body of the device can be fixed with glue. Subsequently, the glue will be needed again to carry out the assembly after the successful completion of cleaning or repairing the remote control.

How to choose a remote control for your Samsung Smart TV

At one time, Samsung Smart TV technology was revolutionary in the field of televisions. This is a very creative and interesting decision of the company. It contains a large number of functions that are now indispensable. For the correct functioning of this function, a good Internet connection is required, therefore the company installs good equipment in TVs with Smart TVs to ensure high speed Internet. For more comfortable control of this technology, you can use special pointers, which are distinguished by great functionality.

Smart TVs are essentially multimedia platforms. For their manufacture, the most modern technologies are used, which allow achieving maximum indicators of image and sound quality. This contributes to the fact that the cost of these devices is quite high. You need to choose a device based on your requirements and for a specific TV model. There are push-button and touch-type devices. If you have any problems setting up or using the Smart Remote Control, look for a solution on the Internet, or contact your hardware vendor.

  • Push-button type of device. The main advantage is that there is no need for customization. It can be used immediately after installing the batteries in a special compartment. It can connect to multiple devices at the same time. Thanks to this, the keypad is universal. It is also often chosen for its ease of operation, as well as for its low acquisition cost.
  • The touch type has a more complex connection process. Insert the batteries first and press the power button. After that, hold down the “RETURN” and “GUIDE” keys for a few seconds until the “bluetooth” icon appears. The appearance of this notification indicates that the device is paired with the TV. The remotes supplied with the TV only work with this unit.

Important! Before purchasing a universal remote, please make sure that it exactly matches your TV model.

Functionality of Smart TV technology

In this video, you will learn more about this remote control:

Malfunctions and their elimination

If you purchased a device and it does not function, the first step is to follow these steps:

  • Read the instruction manual carefully;
  • Make sure the device is compatible with this TV model;
  • Disconnect the batteries and put them back;
  • Remove the power plug from the outlet, wait a couple of minutes, plug it back in and turn on the TV.

The disadvantage of Samsung Smart Touch remote control devices is that repairs are not carried out in official service centers. The cost of the original remote control sometimes reaches a third of the cost of the entire TV set. Therefore, most users try to repair the remote themselves. A common problem is the gradual increase in the rate of discharge of the batteries, and in the end, the remote does not work at all even with new batteries. This is facilitated by the malfunction of the capacitors at the positive input. To solve the problem, you can simply remove them, but this does not guarantee the safety of use, however, without them, the remote control will begin to function normally.

How to open the Samsung remote

open, cover, samsung

Nowadays, Samsung Smart TV remote control is an indispensable product. For a long time, Samsung has been producing remote controls to work with a large number of products. Some of them are universal and fit several types of devices. To buy such a device, you need to decide on the list of characteristics that you want to get for a certain price. The more expensive the remote control, the better its performance.

Functionality of Smart TV technology

In this video, you will learn more about this remote control:

We open access to the back of the case

The preparatory stage of work begins with actions that allow you to get an approach to the back of the washing machine. This is due to the fact that the bolts that hold the top cover are located at the back, and in order to unscrew them, you must have free access to this part of the body.

In the case when the machine is stationary, there should not be any special problems to move it away from the wall and turn it around a little. Another thing is when the washing machine is built into the kitchen set. This situation will slightly complicate the preparatory stage of work, because you will have to get the device out of the furniture, having previously disconnected all the hoses from the house communications. Disconnection occurs as follows:

  • de-energize the MCA;
  • turn off the valve responsible for supplying water to the drum;
  • disconnect the inlet hose;
  • slightly loosen the clamp and carefully separate the drain hose from the sewer pipe.
READ  Vibration not working on Samsung j7 2017

Pull out the washer slowly and carefully so as not to damage the cabinet, furniture or flooring. It would be ideal to lay several floor rags in the place where the Samsung washing machine is being manipulated, they will absorb water that may spill out of the unit when it is moved.

How to remove the top cover of a Samsung washing machine

To repair the Samsung line washing machine, in the overwhelming majority of cases you will have to remove the top cover of the unit. This will be needed, firstly, to gain access to some important parts located under it, and secondly, to freely remove other elements of the washing machine, for example, its front wall of the case. So, let’s discuss how to detach the top cover of the Samsung washing machine to gain free access to the rest of the device and carry out all the necessary diagnostic and repair work.

Step-by-step instruction

Removing the top case cover is not difficult at all. Basically, it is much more difficult to get an approach to the back of the instrument, and this is where most of the time is spent. The algorithm for removing the top of the Samsung washing machine will be as follows:

  • Prepare a Phillips screwdriver of the appropriate size;
  • go around the back of the unit, find the bolts holding the top wall;
  • unscrew the screws one by one and set them aside. Be careful, there may be small washers under the bolts, make sure they are not lost;
  • proceed to detaching the lid, to do this, move it back relative to the washing machine, then gently lift it up.

As you can see, the step-by-step instructions are quite simple. However, there may be a situation where the top cover does not move back in any way. The explanation is simple: it is a little “stuck” to the fixing elements. You can cope with this problem in just a couple of minutes.

First, look at the top of the AGR and visually divide it in half, with the fictional line running across the body. Then lightly tap on the top cover in the middle, then on the right and left sides. Try to move the cover again, if it does not move from its place, do the above steps again, applying a little more force.

Important! Do not knock on the washing machine with heavy objects, their impact can damage the case, worsen the appearance of the unit.

To install the top cover back, you must repeat the same steps in reverse order. Lay it in place with a slight shift, about 5 or 7 centimeters. Then, using both palms to help, begin to move the part forward, towards the control panel. When the housing cover enters the grooves, you will hear a characteristic click, after which you should move it forward a little more, so it will finally snap into place. All that remains is to tighten the fastening bolts, connect the device to utilities and the electrical network.

Solved: Unable to remove ice bucket. Samsung Community

Most ice buckets can be removed by straight pulling. Some models may need to be lifted slightly before removing them. If you are unsure how to remove it, check your user manual to make sure you are removing it correctly.

Samsung recommends replacing the water filter every 6 months. If your water filter has not been replaced in the past 6 months, you can purchase one from Samsung.com or samsungparts.com

Another way to remove the ice bucket. defrost the device by unplugging it or turning off the hammer until you can remove it. Once you have removed it, feel free to restart the ice maker by pressing the reset button on the right side of the ice maker.

Once you confirm that you are removing the ice bucket correctly and that the filter was recently replaced or within the last 6 months, you can send us a private message with the complete model code and serial number. By sending us a private message, we will determine if your product is under warranty or meets any options. Messages can be sent using the following link or by visiting the profile of any mod http://bit.ly/33ipYnO

Be sure to click “✓ Accept as solution” when you find the answer that’s right for you.

Please note that notification emails are a DON’T ANSWER address, you must be logged in on the community page to reply.

View solution in original post

Recover data from broken Samsung screen. How to Recover Data from Samsung Galaxy with Dead / Black Screen?

If your Samsung phone does not have a screen working, meaning the device is working, but you cannot turn it on to work with it, then you will need a third-party app that can sync your phone and computer to create a backdoor. for data recovery. Broken Android Data Recovery or similar software compatible with Samsung phones. However, let’s stick with the first one and see how you can use it to recover data from Samsung phone with dead / black screen.

Key Features of Broken Android Data Recovery:

Now download the powerful software and follow these steps to start the process.

Connect Samsung Phone to PC with USB Cable.

Download and install Broken Android Data Recovery on your Windows computer. After that, launch it and connect your Samsung phone to your computer with a USB cable. You don’t need USB debugging for this.

Step 2: choose the correct mode for data recovery.

In the software window, select Broken Android Data Extraction in the left pane. After that, you will find two options in the right interface: one is for retrieving data from a device with a non-working screen (dead or broken), and the other. in case of damage to the telephone system itself. For our purpose, click the “Start” button under the first.

READ  How to connect a computer to a Samsung TV

Offer the program information about your device.

On the next screen, you will find two data fields: device name and device model. From the drop-down menu next to each, select your phone and its model number. Then check the box “I agree” and click “Confirm”.

Enter download mode.

How To Open back cover Samsung A10. change battery and more

Now you need to enter download mode. The program will download the hotfix package to your phone to fix the problem with your phone and get it back to normal. For this:

(2) Press and hold the Volume Down, Home / Menu and Power buttons at the same time.

(3) Press and hold the volume up button.

Recover Data from Broken Samsung Galaxy.

Once you have entered download mode, click “Start” and the program will start scanning. When complete, you will see an interface with all the different categories of data listed on the left. Select them in groups or as separate data and click the “Restore” button in the lower right corner to create a backup on your computer.

The software only supports Samsung Galaxy S5 / S4 / S3, Galaxy Note 5 / Note 4 / Note 3, Galaxy Tab Pro 10.1. You can check similar models on this page:

How to Recover Data from Android Phone with Broken Screen?

How to disassemble and open the back cover of a Samsung Galaxy A5?

There are two ways how to disassemble Samsung A5. contact a professional service center or do the work yourself. Everything is clear with the first option, so we will not dwell on it in detail. Let’s pay attention to disassembling the phone with our own hands, which is not as easy as it might seem.

Knowing how to disassemble Samsung A5, you can do the job at home and without paying for the services of a master. But remember the risks, because disassembly without experience is fraught with consequences in the form of failure of the smartphone and its final breakdown. That is why, in the absence of experience and tools, it is better to turn to the masters, and not risk the device.

ways to recover data from Samsung with broken screen

A broken or dead Samsung smartphone screen is never welcome. Worse, I don’t know how to recover data from broken Samsung screen. In this article, we will discuss 4 solutions to fix Samsung screen not working in different situations.

How to disassemble Samsung A5

The main question concerns the dismantling of the cover. Smartphone owners often don’t know how to open a Samsung Galaxy A5 phone, as there is no removable battery. The very back of the device is also not dismantled.

To disassemble the unit, follow these steps:

  • Heat the front of the phone with a household hairdryer to melt the adhesive around the perimeter of the product.
  • Take a thin piece of plastic and insert it into the gap between the display and the case, then walk around the perimeter of the device. Be careful not to snag the internal stubs of the product.
  • Detach the cover and set it aside. Next, to disassemble the Samsung A5 2016 at home, unscrew the fixing screws around the perimeter of the device and two more closer to the top.
  • Take out the slots that are on the sides of the device. Use the standard paper clip provided here.
  • To further disassemble the phone, pry the board with something sharp, and then walk in a circle to carefully disconnect the board around the entire perimeter. After completing these steps, you will have a “core” and a back part in your hands. So the question of how to open the back cover of the Samsung A5 has been resolved, but on the other hand. You can start repairs from the back, but this will require a special press, which is only available in workshops.
  • Disconnect all connectors that you find on the board. They can be easily identified by matching wiring and cables.
  • Unscrew the screw that holds the side board from the battery and remove it. Next, dismantle the phone camera and other elements.

Galaxy A10 How to remove or replace back cover

That’s all. Now you know how to open your Samsung Galaxy A5 phone and disassemble it if necessary. After completing the above steps, replace the failed part and reassemble the device in reverse order. To avoid mistakes, record the process on video.

Step 3

Using a screwdriver (Phillips 1.5 mm PH000), unscrew the 7 screws at the top of the phone.

⚠️ Try not to touch the camera. The camera is on its own. very fragile!

If you leave fingerprints or other marks on the lens, it will be very difficult to clean the lens later and the picture quality may deteriorate.

⚠️ Also, be careful not to damage the protective shell of the phone battery in any way.

Step 6

Using a screwdriver (Phillips 1.5 mm), unscrew the 8 screws at the bottom.

Specialist in the creation, distribution and management of content.

Step 5

As soon as possible, disconnect the battery connector.

Ⓘ The Samsung А10 (2019) model has a battery (accumulator) EB-BA750ABU with a capacity of 3300 mAh, also compatible with Samsung A750 and M105 models.

⚠️ We strongly recommend that you disconnect the connector to avoid possible short circuits during disassembly.

samsung A10 back cover open | Pardeep Electronics

Also, try not to use a metal tool to disconnect the battery connector or do it very carefully.