How to open Lenovo ideapad 320 laptop

Two secrets of running BIOS

But if you still did not manage to start the BIOS using one of the above methods, and the laptop is running Windows 8.1 or higher, we will tell you two startup secrets.

open, lenovo, ideapad, laptop

  • You need to turn on the PC. In a running computer on the desktop, drag the mouse pointer to the lower right corner of the desktop (call the side menu).
  • A menu opens to us, where we select the items “Options”. “Update and Recovery”. “Recovery”.
  • Here, in the “Special boot options” section, click on the “Reload now” button.
  • Next, a blue screen with tiles will open. Open the “Diagnostics” tile, by clicking on which you will be taken to additional parameters.
  • You need to open the item “UEFI Firmware Options” and click the “Restart” button. Done! You are in BIOS!

Second secret. Many Win 8.1 users make an error when trying to enter BIOS. Everyone knows how to get into the BIOS. you need to press a certain button on the keyboard. To do this, the user clicks on “Shutdown”, waits for the laptop to turn off, and then presses the button to enter the BIOS, but the computer starts up as before. the OS is loading.

The whole problem is that the Windows 8.1 operating system works initially with the fast startup function, which is based on sleep mode. enter the BIOS without turning off the PC, but restarting it.

Some helpful tips:

  • After entering the BIOS, go to the various settings of the system parameters and its boot in the BIOS itself. Be very careful and careful, and it is better not to touch what you do not know, as there is a risk of doing something wrong and completely losing your computer. After making all the changes, go to the “Exit” section and select “Save exit”. After that, the laptop will be restarted, and on a new start, all the settings that you had to set before will already be taken into account.
  • If the above methods of entering BIOS on a Lenovo laptop do not work, try holding down the F12 key while starting the device until the BIOS starts. this method works on some Lenovo models.
  • It is very rare, but it still happens. in some models the F1 key works (you need to press it several times while the laptop turns on).
  • Manufacturers recommend adjusting PC settings in BIOS only with a fully charged laptop battery, since if during the setup process your laptop turns off due to being discharged, then this is likely to cause some system problems in the future.
  • Before exiting BIOS, be sure to save all changes so as not to get lost.

Remember that BIOS setup is a very serious undertaking that requires maximum understanding of the process and great attention to detail. You should be aware that if the configuration is incorrect, some components of the system may not work correctly, which brings additional difficulties in operation. And if you doubt that you know how to do it right, it is better to call qualified specialists, this will save money, time, and nerves. We hope this article helped you figure out how to enter BIOS.

We have covered all the BIOS setup options that are available on the Lenovo IdeaPad 320 laptop. The user should know each method if one of them stops working. If you have read our instructions and you still have questions, then ask them in the comments. We will pay attention to every visitor!

READ  How to run BIOS on Lenovo

How to enter BIOS Lenovo IdeaPad 320

BIOS is the primary program that determines the operation of all components of a laptop or computer and their interaction before loading the operating system. To change the settings in this program, you need to know how to enter its menu. For Lenovo IdeaPad 320, there are several ways to do this: from the operating system, using a hotkey, a proprietary button.

Hotkeys

Let’s start with the standard method found on any laptop. These are special keys programmed to enable the BIOS. Usually, this button does not depend on the manufacturer of the device, but on the model of the motherboard and the version of the installed software. If you take the Lenovo IdeaPad 320, then with the original firmware and hardware, the user needs to press the F2 button on the initial power-on screen.

If this option did not work, then try the combination of keys Fn F2. This is because the system buttons can only be activated with an auxiliary key. You can also find out the exact button on the startup screen, where you can find information about the BIOS manufacturer and software version:

Every novice user should understand that the BIOS software is the system by which the basic settings for the fast and functional operation of the laptop are set. And therefore, changing them, you must clearly understand what exactly you are doing. It is better for unsure users to consult with a specialist or entrust him with testing a laptop.

Booting from Windows

Windows 10 installed on Lenovo IdeaPad 320 allows the user to enter the BIOS when the operating system is already loaded. This method is universal for other laptops and computers. To do this, you need to perform several steps in the sequence indicated:

  • Run the program Parameters. This can be done from the Notification Center (the rightmost icon at the bottom of the system tray) by clicking on the “All parameters” quick launch button. Other options: from the “This computer” window or right-click on the “START” button (lower left corner).
  • Select the Restore item from the menu on the left in the window that opens.
  • Press the button, “Restart now”, shown in the figure.
  • After the system reboots and a special menu opens, you need to select the “Troubleshooting” section.
  • Select “Advanced options”.
  • Click on the button marked in the figure with a red arrow.

This item prompts you to enter the UEFI firmware menu. In fact, it is the same as the BIOS, only with advanced options (for example, with the ability to control the mouse, a more user-friendly interface, etc.).

After clicking on the specified item, the computer will reboot and the BIOS settings menu (UEFI) will appear.

All these actions can be replaced with a simpler option. By clicking on the start button, you need to call the “Shutdown” list and with the “Shift” key pressed, select the “Restart” line. When the command is executed, the boot is interrupted by the appearance of the BIOS software menu. All the same can be done while on the lock screen.

Boot via Boot Menu

You do not need to do this through BIOS Setup to start Lenovo boot from a USB drive. In Lenovo laptops, a special boot menu “Boot Menu” is provided for this.

READ  How to install Windows 10 on an asus laptop

To enter the boot menu, you must:

    Turn on the system, and immediately press the “F12” button.

Special button

Many manufacturers make additional buttons on their devices for ease of operation. When you press them, a screen appears with a selection proposal:

  • reset to factory settings;
  • restore the system;
  • set the boot order;
  • go to BIOS;
  • continue launch.

Lenovo laptops are equipped with a round Novo button on the top of the panel, which is marked with a specific symbol:

Lenovo IdeaPad 320 has a special button (Bottom Nova) on the left side. It looks like a small hole in front of the connectors. It is very small, you can activate it with a needle.

To use it to exit to BIOS, do the following:

  • Turn on your computer.
  • Press Bottom Nova immediately.
  • In the menu that appears on the blue screen, select “BIOS Setup”.

For Windows 10

The last steps are the same for Windows 8 / 8.1 and 10:

    You need to wait a little before entering UEFI mode and displaying additional settings on the screen, where you need to go to the “Use device” menu.

As you can see, there are a lot of options for booting a Lenovo laptop from a USB drive, and each option offers its own solution, which is most suitable for the user in a particular case.

Lenovo Ideapad 320. Disassembly and cleaning

Read more detailed information with instructions in our new article. “How to boot a computer from a USB flash drive”.

Hotkeys

There is a standard method that is applicable to all computers and laptops. this is pressing a hotkey when the startup screen appears (it is black and contains information about BIOS and devices) during system boot (reboot). It appears briefly, so you can start pressing this key immediately after activating the power button or restart.

The key combination depends on the brand of the motherboard, not on the operating system or laptop model. For Lenovo IdeaPad 320, this is the F2 key, or the key combination with blue letters Fn (bottom left) F2 (top row). This method will also work when the Windows 10 lock screen appears on the monitor (the splash screen that appears immediately after booting or waking up from hibernation).

This initial screen, which appears for a couple of seconds at boot time, can be delayed by pressing the spacebar at boot time.

BIOS Boot

Reference! If the hard disk contains a table of MBR partitions (the old version of the partitioning of the HDD, working with partitions no more than 2 TB), then setting in “Boot Priority”. “UEFI First” may lead to an error installing Widnows.

How to enter BIOS Lenovo IdeaPad 320

The BIOS menu is a tool for selecting computer settings at the hardware level. This functionality is used when changing the priority of loading hard drives, to check the equipment and its condition. In addition to the general BIOS startup methods, there are unique methods for each computer manufacturer. Let’s figure out how to enter the “BIOS” on the Lenovo IdeaPad 320.

Dedicated NOVO button

Every laptop manufacturer is trying to add proprietary features to computer management. Lenovo has become such an option with a separate physical button called NOVO. Its task is to simplify computer management. When pressed, a separate menu is launched, in which you can activate recovery to factory settings, set the boot priority, continue system startup, or enter the BIOS. Some Lenovo models use a button with a special symbol:

READ  How to remove open applications on iPhone

But in the IdeaPad 320, the creators made a hidden button that must be pressed with a thin object, such as a paper clip or a needle. On this laptop, the NOVO Button is located on the left side panel as noted in the photo.

First turn on the computer and immediately press the button once. Instead of loading the OS, a menu of 4 items will appear on the screen. Select BIOS Setup.

Hotkeys

Let’s start with the standard method found on any laptop. These are special keys programmed to enable the BIOS. Usually, this button does not depend on the manufacturer of the device, but on the model of the motherboard and the version of the installed software. If you take the Lenovo IdeaPad 320, then with the original firmware and hardware, the user needs to press the F2 button on the initial power-on screen.

If this option did not work, then try the combination of keys Fn F2. This is because the system buttons can only be activated with an auxiliary key. You can also find out the exact button on the startup screen, where you can find information about the BIOS manufacturer and software version:

Running through the operating system

The last method of launching is universal and is suitable for any computer that is controlled by the Windows 10 operating system. To do this, you will need to do the following:

  • Launch the “Settings” application. You can right-click on the “Start” icon and select the item of the same name in the menu that opens.
  • Now go to the Update & Security section.
  • A list of thematic tabs will appear on the left. You need to open “Recovery”.
  • Then a list of functions appears on the right. Find the “Restart Now” button and use it. Before doing this, do not forget to close all important documents and applications so as not to spoil them.

Now the computer will restart, and instead of the operating system, you will see a special menu on the screen. First you need to go to the subsection “Troubleshooting”. In it, open additional parameters and click on the marked button.

This action will lead to another restart of the laptop. As a result, the BIOS settings menu will open, in which you can perform the necessary actions.

You can go to the same method through the “Control Panel” or the “Start” menu. The last option is the simplest and most convenient. You just need to open the Shutdown list and hold down the Shift button and select the restart item. The same function works on the lock screen of the operating system.

We have covered all the BIOS setup options that are available on the Lenovo IdeaPad 320 laptop. The user should know each method if one of them stops working. If you have read our instructions and you still have questions, then ask them in the comments. We will pay attention to every visitor!