How to install Windows 10 on an asus laptop

Table of Contents

Create bootable portable memory

It should be said right away that you can reinstall the OS in different ways. Previously, it was popular from disk, since there was simply no USB memory. In the early days, many motherboards did not support such devices. But over time, it became possible to carry out the necessary procedure from a flash drive. And even today this option often becomes the only one, since many models simply may not have a suitable drive.

We’ll look at a no-disk option using only compact portable storage:

We find the image of the required OS. Usually Windows 7 is downloaded from different torrent trackers.

Install the UltraISO application. Since the program is paid, in order to use it, we press the “Trial period”. this will be enough for our purposes.

Go to the “File” menu and then “Open”.

Add the previously downloaded system image.

We go to “Bootstrapping”, and then “Burn the image”. A new window will open where we select “USB-HDD”, and then “Format”. We confirm the action.

At the end we are interested in “Record”.

BIOS setup

Now we need to set the boot via BIOS and some other elements. To do this, we perform a number of actions:

First you need to get to the above place. We reboot the device and immediately at startup press “Del”, “F2” or another key indicated on the monitor. it all depends on the model. For example, on k53s, the first option is suitable.

Then we go to the “BOOT” tab and select Hard Drive BBS Priorities. We need to put the USB stick first.

After we find “Launch CSM” and indicate “Enabled”.

Open “Security” and remove “Boot Control”.

At the end, press “F10” and confirm the action. This will save everything that we set, and then reboot the system.

Installation

Well, now let’s move on to directly hosting Windows 8 or any other OS version on the device:

When the system restarts, the display will show a message telling you to press any button to continue. Do it.

A plate will appear where you need to specify your preferred language. As a result, we select “Install”.

The “License Agreement” appears. We confirm reading.

Then we need a “Full Installation”.

Now we decide whether the process will take place with or without the removal of sections. Personally, I recommend allocating about 50 GB to the system disk. If you already have one, just click on the desired drive and then “Format”. We confirm our actions.

How to reinstall Windows on Asus laptop? Step-by-step instruction

Good day, blog visitors.

Any computer, regardless of the “stuffing” and the software used, sooner or later needs a clean installation of the operating system. This is due to various reasons. a new version has appeared, the old one is out of order, there is a desire to remove errors and others. Of course, reinstalling Windows on a laptop on Asus or any other manufacturer will help in all these issues. But today I’m just going to talk about the process associated specifically with the equipment from this computer giant.

Training ( )

If the installed operating system still allows you to work, there are three fundamentally important steps to take first:

Prepare the necessary drivers (for a video card, network). Having them, it will be possible to find the rest of the elements in the future.

Check your computer for viruses with Comodo Internet Security or AVG AntiVirus Free

Copy documents from system drive.

If your device no longer allows you to complete the above points, try to find another one with which you can still do this.

Important drivers for the Eee PC model or any others are on the official website.

But copying documents from the system disk in case of laptop inoperability will not be so easy. If the device allows it, we move it to a safe place. If not, open the laptop, take out the hard drive and try to connect it to other equipment. Pulling out the data you need.

Using the fallback area

Also on some models, such as x54h, it is possible to use the recovery area. This is some space on the hard disk, which makes it possible to restore the system without a removable disk.

Important! If, after purchasing a laptop, the operating system has already changed, most likely it will be impossible to do this.

So, in order to use the tools from the backup department, we do a number of actions:

We restart the system and immediately hold down “F9”.

A menu will appear where we need to specify “Windows Setup” and confirm the action.

A corresponding message will appear at the end.

Turn on the device and specify the settings, as usually happens when you first start.

Well, as mentioned above, such a solution will help to cope with many problems. Sometimes even it comes up when the FN button does not work. But again, not on all models.

Hope this article helps you. Subscribe and tell your friends about the blog.

Installing an OS on a laptop

There are several ways to install a new Windows 10 on any PC: by updating the operating system or by pre-creating an installation drive. In the case of using a bootable flash drive, you will need to free up space on one of the disks for the new OS.

How to install Win 10 on a new PC from an installation flash drive:

  • connect a bootable USB flash drive to the ASUS laptop;
  • choose to boot the system from a USB drive;
  • in the Windows setup program, edit the parameters and click on “Next”;
  • when using a digital license, select “I do not have a product key”;
  • select the version of Windows previously installed on the PC (Windows 10 will be activated via the Internet after the installation is complete);
  • accept the terms of the license;
  • activate “Custom installation for Windows only (optional)”;
  • select a disk for installation, delete partitions from it;
  • after the completion of the process, the PC will restart.

Fujitsu

How to reinstall Windows 10 on Fujitsu using a bootable disk or USB flash drive:

  • at the time the laptop boots up, enter the BIOS using the keyboard shortcut (the combination depends on the PC model);
  • choose to boot from the installation drive;
  • on older versions, you need to activate Boot;
  • call the boot device selection menu;
  • select a disk or flash drive;
  • reinstall Windows.

Important! In some Fujitsu models, when installing Windows 10 via BIOS, in the “Advanced” tab, set “Fast boot. Disabled”, in the “Security” tab, select “Set supervisor password” and set the password. After these steps, it is recommended to reboot the PC. Then, in the “Security” tab, set “Secure boot configuration. Disabled”, and in the “Advanced” tab, select “CSM. Enabled” and reboot the laptop again.

How to reinstall Windows 10 on Dell:

  • download the Dell OS Recovery Tool on your PC and create a bootable drive;
  • using the downloaded image, install Windows 10 (if necessary, update drivers and software);
  • insert the boot drive into the laptop;
  • at the time of loading, press F12;
  • the message “Preparing a one-time boot menu” should appear on the screen;
  • in the boot menu, find UEFI BOOT and select a device with a bootable drive;
  • put out the language;
  • in “Choose an option” select: Troubleshoot;
  • activate: Recover from a drive;
  • complete the reinstallation process by following the instructions on the screen.

Burn Windows 10 to USB stick or DVD

You can burn a Windows 10 image to a disk or USB flash drive directly from the Microsoft website or using programs to create bootable media. Download available for licensed programs.

How to create a bootable USB flash drive (disk) using the Media Creation Tool:

  • connect the carrier to the laptop;
  • go to the Microsoft website and download the Media Creation Tool on your PC;
  • run the downloaded program on your laptop and agree to the terms of the license agreement (“Accept”);
  • in the window “What do you want to do?” check “Create installation media”;
  • in a new window, the program will offer to select a language, architecture, release;
  • in the next window, you need to select the medium (disk, flash drive);
  • the program will indicate the connected media and delete unnecessary files on it;
  • Media Creation Tool will download the distribution kit to the USB flash drive (disk) and burn Windows 10, making it suitable for downloading.

Important! To save a Windows 10 image to a USB flash drive or disk, you can use the UltralSO or Rufus utilities. You will first need to install these programs on your laptop.

You can download a Windows 10 disk image from Microsoft. Before downloading, the system will offer to check the PC for compatibility. The new Windows is loaded onto the media via the Internet. Before downloading, you need to connect an empty 5-8-16 GB USB flash drive or a blank DVD to your laptop. Product key may be required for activation (no key required for digital licenses).

How to independently install and reinstall Windows 10 on a laptop

Users need to know how to update the OS or install the new Windows 10 on a laptop with an old OS. Most computers with Windows 7 or 8 support the popular top ten without any problems. In case of installing a new operating system, the missing drivers can always be downloaded separately, however, incompatible programs will still have to be removed.

Laptop check

PC users with old Windows can update the OS, that is, install the latest version of Windows 10. However, it is recommended to check the system compatibility before installing.

How to independently check a licensed OS from the Microsoft website:

  • go to the Microsoft website (via the update reminder that appears on the screen);
  • find “Get Windows 10”;
  • activate Get Windows 10 for Free;
  • find the option that starts the PC check (click on “Check your PC”);
  • run a scan of the old system;
  • after the end of the process, a message about compatibility or about problems.

List of basic system requirements for an old PC:

  • processor bit capacity: 32 or 64 bit;
  • clock frequency. 1000 MHz;
  • RAM size: from 1 GB for a 32-bit CPU and from 2 GB for a 64-bit CPU;
  • built-in memory: 16 GB, 20 GB;
  • video adapter. DX9;
  • screen resolution. 800 x 600.

Users of the licensed Windows can update the OS for free. Before installing a new Windows 10, you need to find out the type of the old version in order to select the same type of product.

How to check a PC via the command console using the Windows 10 installation drive:

  • write: setup.exe /? (from the console launched from the drive’s context menu);
  • or from the PC command console enter the symbols: cd / d F: / and setup / ?;
  • write: Setup / Auto Upgrade / DynamicUpdate Disable / Compact Scanonly / No Reboot;
  • click “Next”;
  • specify files to save;
  • click on “Next” again;
  • at this moment, the laptop will be checked for compatibility with Windows 10;
  • after scanning, a notification about the problem will be displayed on the monitor (if any).

How to find out information about the licensed operating system available on a laptop:

  • through the “Options” enter the “Update and Security”;
  • remember the “Release” of the OS and the type of “Activation”;
  • you can immediately update Windows by activating “Add Account” and contacting Microsoft Center online.

Important! To test your laptop for compatibility with the new Windows 10, you can download the Windows Hardware Lab Kit or Windows 10 Preparation. The programs will scan and inform the user if their laptop is suitable for installing Windows 10.

Others

How to install Windows 10 on a laptop yourself:

  • create a bootable USB flash drive with Windows 10;
  • connect the drive to a laptop;
  • open it in Explorer;
  • run setup.exe;
  • Windows 10 Setup will open;
  • the system will offer to download updates, drivers;
  • you can choose “Not now” and go “Next”;
  • a window with the provisions of the license agreement will appear (click on “Accept”);
  • the message “Ready to install” will appear (click on “Install”);
  • you can preselect personal files to save;
  • the message “Installing Windows 10” will appear;
READ  How to connect to a TV from a laptop

What to do after installation?

After installing Windows 10, it is recommended:

  • check for updates in Windows Update and install available ones via the Internet;
  • if necessary, update the drivers (for example, using the Snappy Driver Installer application);
  • install a browser;

Use of specialized programs

This is another answer to the question of how to speed up a laptop on Windows 10. But it is not recommended to use all this software without understanding. The fact is that in the automatic mode these utilities can “screw up” a lot, and the operating system’s performance will only deteriorate. The best programs are CCleaner and AusLogics BoostSpeed. They work most adequately with operating system options. But they do not always cope well with the “top ten”. It’s just that these utilities are not optimized to work in this OS.

How to install Windows 10 on Asus X540 Laptop. Enable USB Boot in Bios Settings

It is not recommended to use such programs also because they “settle” in the startup. And instead of an increase in productivity, you get one loss. And this is not needed by anyone. It’s better to do everything manually. Then the system will work as expected.

Updating Drivers

“Ten” is able to install drivers for all devices out of the box. But not all of them work adequately. This can also cause brakes and glitches. This is especially true for Wi-Fi drivers. Replacing these drivers. the answer to the question of how to speed up the Internet on a laptop with Windows 10. To check which driver is installed, just open the device manager, right-click on the name of the equipment and select “Properties”. If the inscription Microsoft is visible somewhere, then it is better to replace such a driver.

You can find the drivers you need on the official website of the laptop manufacturer or its individual components. It usually contains the freshest food for all devices. All that remains is to download and install. After installing all the necessary drivers, you must restart your computer for the changes to take effect. After all these manipulations, the performance of the laptop will increase slightly.

Why do it?

This is necessary in order for the computer to work quickly and stably. Everyone is annoyed by brakes and glitches. And this action will help the laptop to work quickly and stably. However, some not very advanced users take the word of many “gurus” from the Internet and set up their laptop in such a way that there can be no question of any performance. You need to know how to speed up a laptop on Windows 10 and not trust the “pros” from the web. For you can seriously harm your device. Up to death. Laptops with SSD-drives are especially susceptible to this.

System optimization will be useful for those who love games. It is known that the “ten” is perfectly optimized for gamers. But more careful tuning can improve performance. The increase will be visible to the “naked eye”. How to speed up your Windows 10 laptop? We will talk about this below.

Start Menu

In the “top ten” a kind of “Start” menu. It integrates applications in the form of live tiles. Many users do not need all these “pribluda” for nothing. And they consume computer resources and slow down the system. But they can be turned off. Although, in principle, it is not necessary to do this. It is enough to remove them from the menu. If you suddenly need them, then finding them will not be difficult. On the Start menu, they are always listed as installed programs. This is another answer to the question of how to speed up a laptop on Windows 10.

In order to remove the “live tiles” from the “Start” menu, just right-click on the desired tile and select “Unpin” in the window that appears. For some applications, the “Delete” option will also be available. If you do not plan to use this very program in the future, then you can safely delete it. It won’t get any worse. After removing all tiled applications, the Start menu will open faster, and the overall performance of the operating system will improve.

Disable unnecessary services

The problem with Windows is that it has a bunch of services running by default that won’t even be used. Meanwhile, they use system resources. Disable unused components. another answer to the question of how to speed up the startup of a laptop on Windows 10. But here you need to be extremely careful, since some services are required by the operating system for stable operation. You need to know what can be turned off and what is better not to touch. But first you need to look at the list of services. To do this, go to the “Control Panel”, the “Administrative Tools” item, the “Services” sub-item. All services will be displayed in the window that appears. Even disabled.

You can painlessly disable the search service, tablet PC input, Smart cards, Windows Firewall and its defender (if you use a third-party antivirus), print manager (if there is no printer or all-in-one printer), update service (if you do not plan to update the system) But the latter is not recommended. It is not in vain that the developer provides updates to the operating system. Many holes and vulnerabilities are closed there. Performance has also been optimized. To disable a service, you need to double-click on it, click the “Stop” button in the window that appears, and select the “Disabled” startup type. Then click on “OK”. Such procedures are also useful for low-power laptops. Thus, the answer to the question of how to speed up Windows 10 on a weak laptop is also available.

Startup

The biggest problem with any system in the Windows family. The fact is that some programs are put into startup without the user’s knowledge and mercilessly “eat” system resources. At the same time, the owner of the laptop does not even use these programs. There is only one way out: remove unnecessary applications from startup. The most interesting thing is that even system applications load the computer quite well. For example, One Drive that no one needs hangs in startup all the time and “eats” the device’s RAM. Arrange system startup. here is the first answer to the question on how to speed up the performance of a laptop on Windows 10.

To do this, you must first call the task manager with the Ctrl, Alt, Del keyboard shortcut. There you need to go to the “Startup” tab. The manager will give you a list of applications that start automatically at system startup. Many of them are unnecessary. But you need to be careful here, as you can disable hardware applications. And this is undesirable. In order to remove a program from autorun, you need to right-click on the name of the application and select the “Disable” item in the menu that appears. After turning off all programs, restart the laptop. Many have asked about how to speed up the boot of Windows 10 on a laptop. This method helps in this case too.

How to speed up a laptop on Windows 10: instructions

Many owners of PCs and laptops are accustomed to the seventh version of the Windows operating system and do not want to move to the “ten” in any way. But in vain. It is much more productive. But it requires some customization. Like any system. But with the correct setting of all parameters, the difference will be noticeable. Let’s talk about how to speed up a Windows 10 laptop. This is a perennial problem. Laptops are generally more problematic than PCs. Let’s fine-tune the “dozens” on laptops.

Disable graphic effects

“Ten”. a very beautiful system. But all the graphical bells and whistles require a fair amount of RAM and graphics card power. For reasons of practicality, it is better to turn off all the “niceties”. By doing this, you can immediately notice how much better the computer will think. Asked about how to speed up a Windows 10 laptop? Disable graphical bells and whistles. and your laptop will be much faster.

To disable it, just right-click on the “This computer” icon, select “Properties”, and in the window that appears. See Advanced System Settings. Here it will be enough to check the box “Provide the best performance”. All graphic effects will be removed instantly. This will allow the computer to channel all its power into running programs, rather than looking good.

How to install Windows 10 on an Asus laptop with UEFI (using the ZenBook UX310UA model as an example)

Not so long ago, I came across a compact laptop complaining about the impossibility of installing Windows 10 (the error “Installing Windows on this disk is not possible. Perhaps the hardware of this computer”). Well, I had to figure it out

In fact, the problem was (I think) related to the fact that the user incorrectly created the bootable media and tried to install the system from it. Although, I will immediately note that in some cases, incorrect BIOS / UEFI settings may be to blame.

In this article, I will show a step-by-step example of installing the OS on an ASUS ZenBook UX310UA laptop (I will add that on many ASUS laptops, especially from this line, the steps will be similar).

Installing Windows 10 on an ASUS laptop

Creating a bootable USB drive

To work, you need the Rufus utility and a boot image with Windows 10 OS.

And so, insert the USB flash drive and launch Rufus (Important! All data on the USB flash drive will be deleted, so copy everything you need from it).

Next, specify the ISO image (recommended for installation above), then select the option “GPT for computers with UEFI interface” (file system. FAT 32), “Standard Windows installation”. Click the “Start” button (the settings are shown in the screenshot below).

Update from 01/24/2019 (since the Rufus program has been slightly updated, and its design has changed. I will give one more screen for version 3.4 so that no one gets confused).

In general, the flash drive is ready, you can move on

Loading the optimal settings in the BIOS. enter the boot menu.

BIOS settings are not always set by default (default). Therefore, first of all, I recommend to go into the BIOS and restore them.

By the way, you can immediately connect the bootable USB flash drive created in the previous step. I recommend connecting to a USB 3.1 port (installation will be faster, especially if your flash drive supports this standard).

To enter the BIOS, immediately after turning on the laptop (the ASUS logo should appear) press the F2 key (preferably several times, to be sure).

In BIOS (UEFI). first of all go to Advanced Mode (F7 key). see the bottom of the window.

In the Save Exit section, select the Restore Defaults option. Then save the changes. the “Save Changes” button (you can simply press the F10 button. after which all changes will be saved and the laptop will go to reboot. enter the BIOS again with the F2 key).

Restore Defaults. restore the default settings

After restoring the settings, entering the main BIOS (UEFI) window again, press the F8 button (enter the Boot Menu). In it you should see our USB flash drive. select it and press Enter.

Boot Menu. select bootable media

Next, the laptop must start installing Windows. a “circle” should run in the center of the screen

If the installation does not occur. check if you wrote down the installation USB drive correctly and set the UEFI settings.

Windows 10 setup process

The first window is a greeting with a choice of language (I omitted it, just press Enter). In the next window. click the “Install” button.

Next, a window will appear with the terms of the license. agree and click “next”.

In the window with the choice of installation option, select “Custom: Windows installation only (for advanced users)”.

install, windows, asus, laptop

deleting all partitions on the hard drive

After that, you can create one partition on the entire disk and install it into it (some recommend creating two partitions. one for installing Windows, the other for user data). If you create two partitions, then under Windows I recommend allocating space for at least 100 GB.

In my case, I just created one partition for the entire disk (931.5 GB) and clicked “Next”.

By the way, if at this step you see an error that “Windows cannot be installed on this disk” (see the screen below), then you most likely created the bootable USB flash drive incorrectly (see the first part of this article). It is also possible that you downloaded an “incorrect” ISO image with the system.

Actually, if all is well, the installation of Windows should begin. Here you just need to wait while the files are copied (if you connected a flash drive to USB 3.1, then wait not long, 5-6 minutes).

When the files are copied, the laptop will reboot and the installation will continue. Several windows will appear in front of you: but there is nothing interesting in them, you will need to enter a username, set network settings (you can also skip all the steps and do it after). I lowered all these windows, tk. They are of no practical interest, and I think that everyone will cope with them on their own

READ  How To Install Applications On Philips TV

Actually, this completes the installation. Then you can start installing the drivers (in my case, it was enough to go to the official website on this page: https://www.asus.com/ru/Laptops/ZenBook-Classic-Series-Products/).

But to be honest, just in case, I also resorted to Drive Booster and for extra. 5 minutes I updated not only the drivers, but also all sorts of libraries: DirectX, Visual C, Net FrameWork, etc. (without going anywhere and without looking for anything

How to install Windows 10 on an Asus laptop with UEFI (using the ZenBook UX310UA model as an example)

Good day.

Not so long ago, I came across a compact laptop complaining about the impossibility of installing Windows 10 (the error “Installing Windows on this disk is impossible. Perhaps the hardware of this computer.”). Well, I had to figure it out.

In fact, the problem was (I think) related to the fact that the user incorrectly created the bootable media and tried to install the system from it. Although, I will immediately note that in some cases, incorrect BIOS / UEFI settings may be to blame.

In this article, I will show a step-by-step example of installing the OS on an ASUS ZenBook UX310UA laptop (I will add that on many ASUS laptops, especially from this line, the steps will be similar).

Installing Windows 10 on an ASUS laptop

Creating a bootable USB drive

A small but very versatile utility for creating bootable media. Allows you to create flash drives for BIOS and UEFI (for GPT and MBR disks), with different OS (Windows 10 is supported!). In addition, it is completely free and supports Russian.

Windows 10 ISO image

Requirements: you need an image that does not exceed 4 GB in size. Second, discard the different 20-in-1s at once. you need a simple option like “Windows 10 x64 home”. those. in the image one specific system (ie do not use any “Win 10 home / Pro / Ent x32 x64, 5 in 1”). There are a lot of such images on the net. (for example, can be downloaded from the official Microsoft website).

And so, insert the USB flash drive and launch Rufus (Important! All data on the USB flash drive will be deleted, so copy everything you need from it).

Next, specify the ISO image (recommended for installation above), then select the option “GPT for computers with UEFI interface” (file system. FAT 32). “Standard Windows Installation”. Click the “Start” button (the settings are shown in the screenshot below).

Update from 01.24.2019 (since the Rufus program has been slightly updated, and its design has changed.I will give one more screen for version 3.4 so that no one gets confused).

In general, the flash drive is ready, you can move on.

How to create a bootable UEFI GPT flash drive with Windows 10, or why errors occur when installing the system on a new laptop (PC). a guide for beginners.

Loading the optimal settings in the BIOS. enter the boot menu.

BIOS settings are not always set by default (default). Therefore, first of all, I recommend to go into the BIOS and restore them.

By the way, you can immediately connect the bootable USB flash drive created in the previous step. I recommend connecting to a USB 3.1 port (installation will be faster, especially if your flash drive supports this standard).

We connect the flash drive to the USB 3.1 port (installation will be faster!)

To enter BIOS. Immediately after turning on the laptop (the ASUS logo should appear) press the F2 key (preferably several times to be sure.).

In BIOS (UEFI): first of all go to Advanced Mode (F7 key). see the bottom of the window.

In the “Save Exit” section, select the “Restore Defaults” option. Then save your changes. the “Save Changes” button (you can simply press the F10 button. after which all changes will be saved and the laptop will go to reboot. Enter the BIOS again with the F2 key).

Restore Defaults. restore settings to default

After restoring the settings, entering the main BIOS (UEFI) window again, press the F8 button (enter the Boot Menu). In it you should see our USB flash drive. select it and press Enter.

Note: in the boot menu, you (most likely) should display 2 lines with the name of the installation flash drive. You need to select the one opposite which “UEFI OS” appears ().

Boot Menu. select bootable media

Next, the laptop must start installing Windows. a “circle” should run in the center of the screen.

If the installation does not occur. check if you wrote down the installation USB drive correctly and set the UEFI settings.

Windows 10 setup process

The first window is a greeting with a choice of language (I omitted it, just press Enter). In the next window. click the “Install” button.

Next, a window with the license terms will appear. agree and click “next”.

In the window with the choice of installation option, select “Custom: Windows installation only (for advanced users)”.

In some cases, reinstalling the OS may be the reason for the refusal of warranty service (although this is quite rare, but still. Most often, the warranty is given for hardware, and you can install any software.).

deleting all partitions on the hard drive

After that, you can create one partition on the entire disk and install it into it (some recommend creating two partitions, one for installing Windows, the other for user data). If create two sections. then under Windows I recommend allocating at least 100 GB of space.

In my case, I just created one partition for the entire disk (931.5 GB) and clicked “Next”.

Boot Menu. choose bootable media, if at this step you see an error that “Windows cannot be installed on this disk.” (see the screen below). then you most likely created the bootable USB flash drive incorrectly (see the first part of this article). It is also possible that you downloaded an “incorrect” ISO image with the system.

Actually, if all is well. Windows installation should begin. Here you just need to wait while the files are copied (if you connected a flash drive to USB 3.1, then wait not long, 5-6 minutes).

When the files are copied, the laptop will reboot and the installation will continue. Several windows will appear in front of you: but there is nothing interesting in them, you will need to enter a username, set network settings (you can also skip all the steps and do it after).

I lowered all these windows, tk. they are of no practical interest, and I think that everyone will cope with them and independently.

Actually, this completes the installation. Then you can start installing the drivers (in my case, it was enough to go to the official website on this page: https://www.asus.com/ru/Laptops/ZenBook-Classic-Series-Products/).

But to be honest, just in case, I also resorted to Drive Booster and for extra. 5 minutes I updated not only the drivers, but also all sorts of libraries: DirectX, Visual C, Net FrameWork, etc. (without going anywhere and not looking for anything).

A short video with the sequence of installing Windows on a device from ASUS.

How to install Windows 10 or Windows 7 on an asus vivobook

Despite all the “attractions” of the asus vivobook, and there are quite a few of them, the owners have difficulties with installing Windows 10 / Windows 7, especially if they are trying to install from a flash drive.

DVD drive is easier, but since it is not in asus vivobook 17, asus vivobook max, asus vivobook flip, asus vivobook 15, x540sa, d540n, x540ya, x712fa, a512f, x540na, x540ma dm298, 15 a512d, m712d, you have to buy a drive USB.

Although it is not expensive, then who wants to toil with this now, if it is easier from a flash drive and it is now at hand for almost everyone.

There is also a problem for those who install Windows 7, since drivers are usually provided only for the tenth version.

Although not all the way here either. I recently bought a vivobook with a ten, and Wi-Fi worked extremely poorly.

I wanted to download from the official resource, but alas, they weren’t there, I couldn’t even find my model, but let’s get back to the installation.

How to install Windows 10 Windows 7 from a USB stick on an asus vivobook

If nothing is done then your asus vivobook will not see the stick, so you must follow my steps to continue.

In short, you need to create a UEFI flash drive with the Rufus program, then some may see the flash drive right away.

If such an opportunity does not appear, then you need to go to the BIOS menu (as you ruled immediately after switching on, press “Esc”).

Go to security secure boot disable save and exit. Then go to BIOS boot CSM menu to enable savd and exit. Step by step it is something like this.

Insert the USB stick. Turn on the vivobook and immediately press ESC 5-10 times to open the boot menu. Then find the “Enter Setup” option, select it and press Enter.

Once logged in, go to “Advanced” by pressing the right arrow key. There select “USB Configuration” and go to “XHCI Preboot Mode” and disable it.

Now go to “Security” and disable “Secure Boot Control”.

The next step is to enable “Launch CSM” on the download tab, but you will be denied the “Enable” option.

To be able to enable Launch CSM, press “F10” and select “Yes” to save the configuration and exit.

Now quickly press ESC 5-10 times and you will get into BIOS again. Now go to the Boot tab and you will see the Launch CSM option is available, just enable it and press the F10 button again to save.

Then quickly press the ESC key 5-10 times to open the boot menu.

Congratulations! Now you have the option of successfully unlocked boot and you can safely install Windows 10 or Windows 7 from a USB flash drive without straining your asus vivobook.

just keep in mind that at the time of reading this entry, ASUS may make changes and this option will not work. Then write in the comments. Success.

Selecting the Windows 10 installation partition on a laptop or computer

It is worth stopping here for a while. The partition on which Windows 10 will be installed needs to be formatted.

Sometimes there can be only one, sometimes several. If there are several, but others have your data, then format only one, do not touch the rest.

In any case, in order to format, you need to click on the section with LMB, then the format option will become active.

If there is only one section, then you can immediately divide it into two or several. Decide for yourself.

After formatting and pressing the button, the installation process will begin next. Here you will need to wait a little. 10. 20 minutes, the laptop or computer will restart.

Next, you actually do not need to do anything, but only wait for the completion and the appearance of a window with a choice of settings.

In it, I recommend leaving everything as it is. click on the line: “use standard parameters”.

In the next window, select the owner and continue by clicking on.

Now I recommend just clicking on the option to skip this step.

Further, I recommend filling in only the first line, leaving the rest empty, if you wish, fill in this data later.

The next window will provide you with a PIN-code. you want to put it, you want to skip.

In the next window, I leave everything by default. if you want to use the clouds, you can customize them.

Installing Windows 10 on a laptop directly

I note right away that if you install from a USB flash drive, and have not yet recorded it, then here is the program and instructions on how to do it correctly.

The first thing you will see during installation is a white bar at the bottom of the screen. Wait for it to run from the left side to the right, then the process itself will begin and you will be prompted to select a language.

There is not always a choice (depending on the assembly). if there is, we choose and continue further.

There is nothing to choose in the next window. It has only one “install” option, which is what we do.

Now, as almost always happens, you need to accept the agreement by placing a bird, it is not necessary to read it at the same time. decide and move on.

You will now be presented with a choice of two options. First update and second clean install. We choose the second option. a clean install of Windows 10.

How to install Windows 10 on a laptop

In general, installing Windows 10 on a laptop HP, Lenovo, ASUS, Samsung, Acer or any other does not differ from a computer one, except for a little entry into the BIOS. in both cases, you can install it for free.

You will need to enter the BIOS if you decide to install from a USB flash drive or disk. how enter and configure BIOS of all kinds in a computer or laptop, you can find out right here.

And so, and so it will be correct, only the second option is easier and all your data will be saved.

Only this option is suitable if you have an old laptop, or rather Windows 7 or 8 is already installed on it.

If you have a new laptop, or rather a clean one, then only the first option is through the BIOS. We will assume that we figured it out, entered the BIOS and set everything up.

The final stage of installing Windows 10 on a laptop

I will not show with pictures further, everything will be clear without them. In the process, you will be prompted to connect the network.

READ  How to install applications on a new iPhone

I always skip this step and connect the Internet to complete completion. Somehow something went wrong with the Internet connected.

install, windows, asus, laptop

At the final stage, the applications will be automatically configured, you have nothing to do there, but only wait about 5 minutes.

It is also possible that some picture will not be an exact copy as here on the site, there will not be all or some more will appear that are not included in this entry.

This should not mislead you, the main point will always be as described and shown above.

NOTE: it is rare, but it still happens that the laptop turns off during installation or does not complete the process.

Why this is happening and what to do then you can find the answer in the lessons section of the menu (at the very top).

Today I cannot put a link, because only tomorrow I will write this article. Good luck with the new OS.

How to install Windows 10?

Windows 10 left the Technical Preview in August. Now not only enthusiasts and technicians can use it. The new operating system is better and more convenient than all previous versions of “windows”. Anyway, at the moment. However, many users are wondering “is it worth installing Windows 10 on your laptop?” The alternative for them is to stay on the previous stable version. In this article, we will reveal the benefits of using the new product from Microsoft, as well as explain in detail and step by step how to install Windows 10 on a laptop.

Installing Windows 10 on a laptop: step by step instructions

Better to start by visiting a special page dedicated to Windows 10, posted on the official Microsoft website. Everything you need to install is collected here.

Experts advise against using third-party utilities of dubious origin. over, this time Microsoft specialists really prepared well, and their utilities are reliable and easy to use.

Is your laptop ready to install Windows 10?

This will be reported by a special utility that you can find on the support page. The general requirements are as follows.

  • Screen with a resolution of 800 × 600 pixels.
  • About 20 GB of disk space.
  • At least 1 GB for 32-bit or 2 GB for Windows 10 64-bit RAM.
  • Video card that understands DirectX version 9 or higher.
  • or less modern processor with a frequency of 1 GHz or higher.
  • PAE, NX and SSE2 support

How to install Windows 10 from a flash drive or DVD?

To install Windows 10 from a USB flash drive or disk, you need a system image, which can be downloaded from the above support page of the official website. There you will also find a utility for writing an image to a flash drive. Click on the Download tool now button, after selecting the version: 32 or 64 bit.

The program is called Media Creation Tool.

  • In Media Creation Tools, select the desired action: install Windows 10 on your laptop right now or create a bootable USB flash drive.
  • In the next window, decide on the OS edition, language and bit depth. The choice of bit depth is related to the capabilities of the processor. But even if the central chip is capable of supporting 64-bit computing, but the memory is less than 4 GB, then you can opt for the 32-bit version. There won’t be much sense in switching to 64-bit.
  • Specify the type of media for recording the image: a flash drive of at least 4 GB or a DVD disc. Most portable laptops do not have a DVD drive, so there are few alternatives.
  • After capturing the image, restart your laptop. If the boot from the flash drive does not start, then configure the order of devices to boot in the laptop BIOS. How to enter BIOS, read our article.

How long does it take to install Windows 10?

It all depends on the speed of your Internet connection and the storage system. The process takes place fastest on an SSD drive, and takes a maximum of 30 minutes. On older laptops with a conventional 5400 rpm HDD, you need to prepare for an hour of device unavailability during an update, or even more.

Benefits of using Windows 10

Let’s try to answer the most important question: is it worth installing a fresh version of the operating system from Microsoft? You will not find any stunning or revolutionary innovations in comparison with 8.1. However, in every component the operating system has improved both in speed and controllability. Here are just five points that any laptop user might be interested in.

  • The most important news for all those who have taken hostility to the “tiles” of the eighth version. the return of the familiar desktop “Start” menu. It has become much smarter and more convenient to use. To run any program, you just need to type the first couple of letters of its name. Live tiles are still there, they have moved to the Start menu bar.
  • Significantly improved Mail and Calendar application will finally allow you to fully work with mail in standard Windows applications.
  • The new Edge browser is much faster and smarter than its slow predecessor IE.
  • The setup menu became clear to the user. A short list of the main points, with large, easy-to-understand pictograms. But the main achievement is a convenient search for settings. Just write what you need and get an approximate list of settings that will help you.
  • Thought over and improved file synchronization with OneDrive cloud storage and smartphones under all popular mobile OS.

And this is not a complete list of all the updates and innovations. So let’s get started with the installation. A step-by-step guide will help you understand all the main points of this process and do everything yourself.

Preparing a laptop for installing Windows 7.

At various technical forums they write that in no case should the BIOS be updated on this unit before installing Windows 7. It is quite possible that they are right, I am simply not a supporter without good reason to do this. If you have already updated, you need to “grow old”, ie. roll up an earlier firmware. The people tried, they say. they don’t get it.

To put Windows 7 on this unit, you need to go into the BIOS and select strictly “non-UEFI” devices as bootable ones. Otherwise, the installation will not work. After that, the installation will go like clockwork.

How to install Windows 7 on Asus X751SA (instruction)

It all started when the aforementioned laptop was purchased, and the task arose to install Windows 7 on it.

It was purchased without an OS, namely Windows 7, tk. so far this is the “corporate standard” and some old programs in the eight or ten do not plow very correctly.

I must say right away that the beech is sharpened for Windows 10. The included driver disc contains exclusively drivers for Windows 10. The official website also contains drivers exclusively for this OS, with 64 bits.

Uncle Yasha brought to the forum, where it was quoted that, they say, this line and the adjacent “hardware is not compatible with Windows 7”. “This is unfortunate.” I thought. No, in principle, I read that it does not support it even before buying, but the device turned out to be very attractive in terms of price-quality ratio, and a certain sporting interest appeared. I think I really can’t overcome?

In general, the word “instruction” in the title is not accidental. this time I won. And now everything is in order.

Installing the drivers

After the OS is installed, you need to install the driver. And this is where the fun begins. USB ports, including those that USB 2.0 don’t work, so forget about flash drives, external hard drives, etc. CD / DVD only. If you have DRP burned to DVD (it fits on double layer), then you have no problem.

If you haven’t bothered to purchase and burn a disc with DRP, then here is a simple and elegant solution: take an existing CD and install a driver for Wi-Fi from it. Further, I think, there is no particular point in explaining. download DRP and install all the missing drivers.

Now criticism may pour in my address, they say, why come up with something, when you can just remove the hard disk and write to it DRP. I answer. Anyone who wants to can do so, I do not limit. I’m inside a new device, which is under warranty, without special need I try not to meddle.

The only driver that is not there (well, then it was not. DRP17), this is a driver for a video card and some other garbage.

A driver for vidyuhu, whatever you are looking for, you can take it here, there is also a driver for USB 3.0, but for this garbage in principle, you don’t need to install anything. This device works only in Windows 8 and higher, it provides some kind of security and is not required. If you are enraged by this non-installed device, there is a KB fix on the small soft website search for it, in general, but everything suits me:

This is the very “Unknown device” that you can fight, or you can just spit on it, if you are not a perfectionist and not a psycho who is annoyed by any exclamation marks in the device manager.

That’s what it’s called. You can score ACPI \ MSFT0101 in Yandex and read the information on the official Microsoft website.

It is quite possible that the described method will work on adjacent models of Asus notebooks, as. their hardware is quite standard, no revolution has happened, and the problem comes only from the head. Rather, from the UEFI-shny BIOS, 99% of the settings of which the manufacturer “carefully” hid from us so that they would not cheat, but install Windows 10 and not bother with freedom of choice.

I’ll tell you a secret, Windows 8 is installed on these systems with a whistle, so if there are fans of this OS, this is good news for you.

How to install Windows 7 on new laptops?

Our patient today is an Asus x541n laptop, which initially does not accept Windows 7 installation, only Windows 10. But for some reason we need to install an older version. So in my case, a person asked to install an old Windows 7 on his brand new laptop. The methods described below will be useful not only for the Asus x541n, but also for any other new laptops on which you need to install Windows 7 or older versions.

First you need to correctly write Windows 7 to a USB flash drive. In our case, it is better to do it using the Asus EZ Installer program, you can download it here. In other cases, you can use the program “Rufus” (easy to Google, the first link to the official site). Below I briefly describe how to properly configure Rufus:

  • Select the USB flash drive on which we will record Windows 7. It must be at least 4 GB in volume.
  • We must select the item “MBR for computers with BIOS or UEFI”.
  • Select the file system NTFS. This is not such a mandatory item, but in this version everything is recorded and then installed as it should.
  • Click on the icon under item “4” on the screen, select the image of Windows 7. Also check the boxes as in the screenshot.
  • Once again, we check if everything was set correctly and selected. Click “Start”.

Now that the Windows is recorded, we need to perform a number of manipulations in the BIOS (after the settings indicated below, the current Windows will stop starting):

  • When turning on the laptop, press F2 (or DEL), you will get into the BIOS.
  • In the BIOS, switch to the BOOT tab (by the way, it can be called Boot Options) and look for a section with a similar name to “UEFI / BIOS Boot Mode” (or “Boot List Option”, or simply “Boot Mode”), in which select “Legacy”.
  • Then in the same place in the BOOT tab (or in the Security or System tab), find an item with a similar name “Secure Boot Control” and select “Disabled”.

Above were the basic points that are in any BIOS, now we still need to check other options for settings. I must say right away that they may not exist and this is not scary.

  • In the BOOT tab, look for the “CSM Support” item and select “Enabled”.
  • All in the same place we are looking for the item “Fast Boot”, in which you need to select “Disabled”.
  • Sometimes there are also items with a similar name “Type OS” or “Support OS”, in which you can choose direct support for Windows 7 and other versions.

I would like to draw your attention to the fact that in some BIOS the tabs with the above listed options may be called “Boot Feature” or “Advansed”. But if you cannot find some option in the tab I indicated, then do not be afraid to just switch to others and search there. Often, laptops from different manufacturers have different BIOS in their structure.

Write comments, share the article in social. networks! Thank you