How to glue screen protector on iPhone

Table of Contents

Glass on the phone: how to glue? Preparing the surface

glue, screen, protector, iphone

If you have previously installed film or glass, these components will need to be removed. To do this, remove the cover, if there is one, then hook the element to the edge. In order to prevent the appearance of greasy stains on the glass, you should thoroughly wash your hands and dry them in advance. By the way, preparation of the workplace remains an important stage. You need a flat horizontal surface and powerful lighting. This could be, for example, a table. Lighting can help avoid undetected streaks and dusty areas. So what does it take to integrate glass on your phone? How to glue it? The operation will become correct only if you process the “bare” screen in advance.

How to glue the protective glass on the phone correctly? Step-by-step instructions

A smartphone is an expensive thing. Even when purchasing a budget-class device from 5 to 15 thousand rubles, we want it to serve for a long time and faithfully. The fidelity of a gadget, in turn, depends on two parameters: internal and external. And if we cannot influence the first (represented by the hardware part), then we are just able to overcome external factors. We can protect our smartphone, if not from drowning, then from mechanical stress, for sure. And the glass on the phone will help us with this. How to glue it? We will talk about this today.

What is it

The appearance of the protective glass is similar to the exterior of the film. Indeed, the tasks of these two elements are similar to each other. However, protective glass is rightfully considered to be a more reliable component, since it has a higher density compared to a film. In addition, it is transparent and flexible, and this is also of some importance. Of course, it will cost more than a film. However, it is worth it, especially in cases where there is either a high probability of mechanical impact, or when the gadget is really expensive. For everyone, this bar is different, but most users prefer to buy glass if their devices cost more than 10-15 thousand rubles. When buying a protective glass, the user reduces the likelihood of damage to the main screen to almost zero, since the above-described component will take the entire blow. Before talking about how to glue tempered glass on a phone, I would like to draw your attention to the advantages of the element.

The most important stage

There is a special film on the adhesive side of the glass. It needs to be removed. After that, we apply the glass itself to the screen. Care should be taken to ensure that it is aligned with the edges of the device, aligned with the speaker and controls. By the way, you need to remember that you can only hold the protective glass by the edges. Only in this case there will be no traces after the operation. When the fit is complete, simply lower the component onto the screen. The glass will stick itself. Great, now we know how to glue glass to your phone.

Why do you need cleaning

To clean the screen, freed from film or glass, a damp disc or an alcohol wipe soaked in alcohol should be used. Wipe the screen thoroughly so that no dirt remains on it. After that, you should wipe it with a special cloth, if it is included in the kit. If it is not there, then you need to find an analogue. Now it’s time to put the glass on your phone. How to glue? Find out further.

Considering the complete set

A very large number of requests are related precisely to how to glue the film (glass) on the iPhone 6. However, it should be understood that the process is generally the same for other devices. Why then dwell on specific models, if you can describe the operation universally? First of all, let’s see what is in the package with the protective glass? Different manufacturers offer different configurations, but usually there is glass itself, an alcohol wipe and a cloth made of special material. If there are no rags or napkins, then you can use improvised counterparts, this is not fundamental.

Are there any downsides

Yes, like other elements, protective glass has some disadvantages. Some users who are interested in how to glue screen protectors to their phone may think that this is the main drawback. it is indicative of the complexity of the integration process. Like, if it is wrong to stick it on for the first time, then you will not do anything later. In fact, this is not what we are talking about now. The main disadvantage of this component is the fact that the device on which you will glue it will become more voluminous and heavy. However, if this does not bother you, and you are not very sensitive to the weight and dimensions of the phone, but you want to protect it, then you can contact the cell phone stores. They will offer not only the best products, but for additional money they will be able to stick high-quality glass.

Functions and useful properties

There is not much to say about the functions of the protective glass. From its name it is already clear why it was developed and what it was intended for. Whether it’s the features that can be talked about for hours. Their list, for example, includes resistance to scratches and other similar damage. Someone may doubt this parameter, but usually all doubts disappear after an indicative test. For this, you can use ordinary keys. Run the sharp edges over the glass and you will see that it really does not become covered with marks.

The second useful property of safety glass is shock absorption. We have already mentioned this briefly above. A large number of smartphones, when dropped down by the surface of the screen, are physically damaged up to the complete breaking of the display. With a protective glass, this problem will be solved, because instead of the screen it will break. By the way, the word “will break” here should also be understood a little differently from its usual meaning. Fragments from the telephone protective glass do not fly to the sides. Finally, we can note the fact that the glass is held very, very reliably. Especially if we compare it with a simplified element. film. Users who so often ask questions about how to properly glue glass on a phone may be delighted to learn that this operation does not require any special experience.

Is it possible to re-stick the protective glass on a smartphone?

The answer to this question will depend on the quality of the product, as well as its characteristics and properties. Re-sticking the glass if it comes off or does not stick in certain places is not only possible, but even necessary. In this case, two problems can be distinguished that will require different actions.

    The first problem. it was not possible to fix it the first time exactly and it is required to re-stick the protective glass exactly along the contour of the smartphone. This problem can be solved quite simply, you just need to follow the detailed instructions below in the article. And you can also study the visual instruction in the video, which will avoid most of the problems.

Glycerin can be an alternative to the liquid for gluing on the edge of the protective glass. It is easy enough to apply the glycerin with a brush to the edges of the already fixed glass and run with a napkin, removing the excess to ensure fixation. Apply liquid to fill all voids and grooves between glass and display.

READ  How to transfer files from Android to iPhone

The main problems when gluing protective glasses

The first and main problem, if you need to re-glue the old protective glass of the phone, will be its removal. The complexity of the procedure lies in the need to carefully lift the protective glass, separating it from the display. In addition to glue, the screen will hold due to static attraction and tight fit.

Remove old glass carefully, without leaving small fragments. When pushing a plastic card, it will need to be stopped, if even a small fragment gets under an angle. this is a threat of damage to the touchscreen.

An equally difficult problem is the presence of an adhesive base. A significant part of protective glasses use a special glue, which is able to securely hold the entire structure at the first sticker, but with each new removal, the duration and effectiveness of holding decreases.

Useful Tips

You can remove dust, debris or lint that got on the display before installing the protective glass using adhesive tape. Cut off a thin strip, stick it on a speck and lift sharply over the edge. the procedure will not only get rid of debris and prevent the formation of air bubbles, but also leave no traces.

If you re-glue the protective glass, it can be removed and glued back in a few seconds. Remember that even a slight skew or the edge of the glass protruding by a fraction of a millimeter above the body of the smartphone can damage it and significantly reduce the level of protection.

How to re-glue the protective glass on the phone: instructions

Please note that re-bonding the glass will be slightly more difficult than using a screen protector. First of all, it is not recommended to lift this type of product only partially. It will be necessary to completely remove the glass, and after that install it a second time exactly along the contour of the smartphone.

If you have already removed the protective glass, do not turn it over. The adhesive side should be down to prevent debris or dust from entering. Even a small particle of dust can cause problems with the sensor, damage the touchscreen or simply leave an air bubble.

The steps for gluing glass a second time can be divided into several stages:

  • Remove the cover, if present, and then remove the protection itself using a plastic spatula or card. For removal, you can use a silicone suction cup, which will allow you to conveniently remove the old glass if you simultaneously lift it with a plastic card.
  • We clean the display if dust gets on it. Use an alcohol-free lint-free cloth for cleaning. After degreasing and cleaning, you will need to wipe the display before applying the glass using a dry microfiber cloth.
  • Having installed the glass at a height of 2-3 centimeters and aligning it with the smartphone. lower the protection onto the display. For the sticker, you just need to lightly press the glass in the center so that it adheres to the display on its own.

How to qualitatively re-glue the protective glass on the phone again yourself

How reliable is the protection of the smartphone when the protective glass is installed for the first time. just as it will become dangerous if it is damaged. If your screen protector has already fulfilled its function and prevented impact or scratching of the display, having received significant damage, it needs to be replaced. After you have completed the installation of the protection yourself for the first time, it will not be so difficult to re-glue the protective glass on your phone. Just follow all the instructions as you did when installing the protection for the first time, following the steps exactly.

As you can see, plywood of protective glass does not require skills or skills, and tools can be easily replaced with improvised items. Install all types of protective screens directly in your home, carefully prepare the place of work, get rid of dust and study the instructions and our recommendations.

Degrease the screen surface

This will remove dirt and streaks that can ruin the entire result. Proceed like this:

  • Use the supplied wet wipe, or sprinkle the screen with display cleaner, antistatic agent, or alcohol.
  • Wipe thoroughly to remove residual glue from the old film and other possible contamination.
  • Use a microfiber cloth to wipe the screen dry.

What are the pros and cons of protective glass

The protective glass is several times harder than the most durable film, and therefore saves the device not only from scratches. As the manufacturers say, it can even withstand a hammer blow. We do not recommend conducting such experiments. But we can say: if you fall, most likely, it is the glued glass that will break, and not the screen of the device.

At the same time, such protection does not affect the sensitivity of the sensor and the brightness of the image.

iphones.ru

However, glass is more expensive than film. And you can pick it up only for relatively popular models of smartphones and tablets.

Make sure there is no dust

To be sure to play it safe and collect any dust particles from the surface of the screen, use a special sticker from the kit, a strip of adhesive tape or electrical tape. Just stick and peel them all over the display area.

What kind of protective glasses are

The technology of protective accessories does not stand still and is developing along with smartphones. Now on the market there are glasses with a high-quality oleophobic coating, rounded edges, as well as frames that repeat the design of gadgets. Conventionally, all types of protection can be divided into three categories:

  • 2D. ordinary glasses with straight ends, which do not reach the border of the screen by about 1 millimeter;
  • 2.5D. such options have small smooth chamfers around the perimeter, which are combined with the curvature of the body;
  • 3D. special glasses with curved edges for smartphones with a screen extending to the side edges.

Prepare your tools

In addition to the device and protective glass, you will need:

  • LCD cleaner, antistatic agent, or regular alcohol.
  • Microfiber cloth.
  • Stationery tape.
  • Scissors.
  • Plastic card or scraper.

Try on and align the safety glass

Make sure that all holes and cutouts are perfectly aligned. This is done like this:

  • Apply the protection to the smartphone with the correct side.
  • Try on so that all gaps along the contour are the same.
  • Stick two or three strips of tape 3-4 centimeters long on the glass at one of the side edges.
  • Attach the loose ends of the adhesive tape to the back of your smartphone.
  • It should look like a drop-down book.

How to stick a protective glass on a smartphone

A detailed guide for those who want to make their device virtually invulnerable.

Eliminate errors

If too much dust and dirt gets under the protective glass during gluing, it will be inconvenient to use the smartphone. The sensor may react worse to touch, and the appearance of such a phone will not be the best. Many users are wondering how to re-glue glass on an iPhone and can it be done at all? Yes you can.

If the accessory does not adhere properly the first time, carefully detach it from the display and set it aside on a clean surface. Wipe the iPhone screen thoroughly again and make sure it is free of dust and dirt. Only after cleaning the screen, stick the glass again. You shouldn’t peel off the accessory anymore.

In this tutorial, we have used Mocoll glass. And it’s not just that

When you sadly look at an iPhone whose display is covered with a pitiless mesh, it’s too late to think about protection. The manufacturer of protective accessories Mocoll took care of the consumer in advance.

All brand products are built in such a way that the buyer spends a minimum of time gluing the protective glass.

Considering that the Chinese brand Mocoll (our review) has been producing protective glasses for several years, the company’s engineers have thousands of hours spent in research laboratories.

Glasses are produced using high-tech equipment and in the process of processing they obtain a number of important properties. Mocoll glasses:

  • They are only 0.33 millimeters thick. The glass is uniform and of equal thickness at any point. Mocoll has one of the lowest manufacturing tolerances among glass manufacturers.
  • Mocoll glasses easily withstand the impact of sharp objects and do not shatter into fragments on impact.
  • Hardness at 9H on the Mohs scale. Higher only in diamond.
  • The glasses have an oleophobic coating, so after gluing you will not feel any tactile changes from interacting with the iPhone screen.
  • Mocoll supplies its products with a rich package. The set has everything to stick on glass without additional purchases and searching for a piece of fabric or a plastic card to eliminate bubbles.

Mocoll has several options for safety glasses at once. 2.5D, 3D and advanced development. 3D glasses with elastic edges to match the color of the device body.

As you can see above, it is very easy to install Mocoll safety glasses. Due to the presence of a special silicone layer, you can not worry about the appearance of hated bubbles during gluing.

Cleaning the display

Tidy up your workplace. Make sure there is no dust on the surface, which may eventually remain under the film. Then open the packaging and place all items on a clean, flat surface.

READ  How to make iCloud on iPhone

Clean your smartphone screen with a cloth and glass cleaner. Thoroughly dry the display surface and wait until it dries completely. This action will remove even invisible dust particles. Avoid touching the iPhone screen itself anymore to avoid creating new streaks and dust particles. Wipes for the initial cleaning of the phone come with a protective glass.

Smoothing the surface

Users do not always know how to stick glass on an iPhone. As a result, the result may not be perfect. To remove small irregularities or trapped air, take a piece of microfiber (included with the glass) or a clean cloth and gently wipe the phone, moving from the center of the display to the sides, applying light pressure. In this way, flaws can be eliminated.

Tips for choosing a safety glass

If you’ve decided to purchase a protective glass for your iPhone, here are some basic tips for choosing this accessory:

  • the thickness of the glass determines the level of protection of the phone from drops and shocks;
  • choose the type of glass. matte or glossy. The second option is cheaper. Glossy products protect the screen from bumps, but not from scratches;
  • frosted glass fully protects your iPhone from bumps, scuffs, drops and glare.

Installing a protective accessory on your phone screen does not require any special skills. Let’s take a closer look at how to apply a protective glass on an iPhone in a few simple steps.

Gluing

Turn the protective glass over with the side that was released from the film down. Place the accessory over the screen of your smartphone without touching it. Try to match everything as evenly and accurately as possible to avoid uneven gluing.

Further action must be done very quickly. Gradually apply the glass to the iPhone display from the top to the bottom. Let go of the film so that the side sections adhere to the phone by themselves. Due to good cleaning of the display, bubbles will not form.

Let’s get started

Cleaning up the iPhone display.

To do this, we use any microfiber cloth so as not to leave anything superfluous on the screen.

You can also use an alcohol wipe and then wipe the display with a microfiber cloth with a soft cloth.

Additionally, we clean the smartphone screen using the bundled tape or any other sticker.

Just touch the display with tape and lift it back up. The adhesive surface will collect dust residues.

Now you need to remove the protective film from the adhesive side of the glass and attach it to the screen.

Important: hold the glass by the edges so as not to leave unnecessary marks on it.

Place the glass gently on the iPhone screen.

If the glass is good, it will fit on the smartphone screen by itself. But for greater confidence, you can smooth it yourself.

We run our finger through the center of the smartphone and start smoothing until all bubbles are removed. If there are any small bubbles left, take a plastic card and, using light pressure, slide it over the areas where the bubbles are formed.

Unpacking the protective glass

In the next step, unpack the accessory and prepare it for sticking to your phone. Take the screen and peel off the protective layer, which, after gluing, will be in contact with the phone display. After detaching the protective layer, try not to touch the protective glass, otherwise fingerprints will remain on the product.

iPhone 11 : How To Install Glass Screen Protector

Pros and cons of protective glass

Our readers probably know that glass is not the only protective coating applied to smartphone screens. No less popular is also a protective film, which has similar parameters. However, each of these products has a number of advantages and disadvantages, which must be taken into account when choosing. Since this article is devoted specifically to protective glass, first of all we will talk about its strengths and weaknesses. After that, you can independently decide for yourself whether to use it or look for other options.

Let’s start with the advantages of this protective coating. If you highlight every detail, then a very impressive list of them is typed, so let’s go through the most important and demanded qualities.

  • High strength. The protective glass is very durable and perfectly protects the smartphone from the accumulation of small scratches. If the protective film takes a hit and wears out over time, becoming covered with a cobweb of small scratches, then the glass allows you to completely avoid them. You can damage the glass only if you carry the phone with keys or other sharp objects, but even in such cases, the damage will be very insignificant and you can not be afraid for the safety of the display.
  • Shockproof protection. Unlike film, glass will successfully protect your smartphone from minor shocks. Even if the smartphone falls from a height onto a hard surface, only the protective layer will most likely crack, and the smartphone screen itself will remain unharmed.
  • Durability. Glass wears out very slowly and, if it was glued correctly, can serve you for more than one year. Also, over time, the glass does not darken and does not lose transparency.
  • High performance characteristics. Usually even not the most expensive protective glass has very good user characteristics. After installation, in most cases, no traces of glue remain, the glass does not affect the correct color rendition, the sensitivity of the sensor, and also has its own oleophobic layer to protect against greasy traces.

However, there are also significant disadvantages that we must pay attention to in order to maintain objectivity. There are not so many of them, but for some consumers they can be quite significant.

Do not forget that even the best protection cannot protect your smartphone one hundred percent. After gluing the glass, you should not completely neglect the careful attitude towards it, because this is the only way you guarantee its safety, functionality and neat appearance for many years.

Prepare your smartphone and glass

Take your smartphone and purchased glass and place them on the table. Before proceeding with the gluing of the protection, it is very important to do a wet cleaning of the room and get rid of all the dust. If this is not done, then at the final stage of gluing, dust particles can penetrate under the glass, which will ruin the entire appearance of the display.

How to glue a protective glass on a phone: detailed instructions

Little by little, we got to the most important thing, namely, to the instructions on how to properly stick the glass on the phone screen. It should be said right away that this task, although not difficult, is very responsible, since it will not be possible to re-stick the wrongly glued glass and you will have to buy a new one. Therefore, before starting work, carefully read the instructions and make sure that you have all the necessary tools.

Degrease the screen surface

Take a damp cloth and wipe the display surface thoroughly in order to clean it as efficiently as possible from grease, dust and stains. Then use a dry cloth and wipe the screen so that it stays completely clean and free from moisture.

Remove excess air and dust

There are times when it is still impossible to stick the glass without bubbles. Don’t be too upset, just grab a rag and gently push out the air bubbles from the center to the edges. If dust gets under the glass, then this is already more serious, and in this way it will not be possible to remove it. To remove a speck of dust, prepare a strip of stationery tape, then bend the glass with a plastic card, attach the speck of dust to the tape and tear it off sharply. After making sure that there are no more “surprises” left under the glass, wipe it thoroughly with a dry cloth or rag so that it adheres well on all sides.

Use only clear office tape to remove dust. You cannot use colored, construction or paper tape, as it is likely to leave traces on the screen.

How to properly glue a protective glass on your phone at home

Buying new equipment is always a very exciting and joyful moment. When we pick up our brand new smartphone, the overwhelming majority of us want it to stay in this perfect condition for as long as possible. However, unfortunately, during daily use it is very difficult to take good care of the gadget, and soon it loses its original appearance.

The most vulnerable part of a smartphone to wear is undoubtedly its display. If, for example, the phone is a frequent visitor in a handbag, or you just carry it in your with other things, then it is very likely that soon scratches or even small chips will appear on its screen. Fortunately, there have long been special protective glasses for displays, which will be discussed today.

Protective glasses for smartphones are quite popular, but few users decide to glue them to their phones on their own at home. Nevertheless, this process is not as scary as it might seem at first glance, and the gluing instructions are simple and straightforward. In this article, we will tell you how to glue the glass on your phone, as well as analyze all the most important points encountered in the process of performing this procedure.

READ  Error uploading photos to iPhone

Prepare your tools

As we wrote earlier, it is better to buy protective glasses, which already include all the necessary wipes. If not provided, prepare regular alcohol wipes for cleaning glass or screens, as well as a microfiber cloth to dry the display. You may also need scissors, stationery tape, and a plastic card.

How to do it

Remove the iPhone case before gluing the screen protector. If the iPhone display is already covered with old film or glass. feel free to remove it. Wash your hands thoroughly to avoid getting dirt on the screen.

It is best to glue in a well-lit place to see every speck that hits the screen of the device. Well, choose the cleanest surface for the glass sticker.

Step-by-step instruction

Preparation of the workplace is considered an important point. Choose a room with minimal dust. A kitchen or bathroom works best. There are too many textiles in the bedroom that attract particles. Such a moment interferes with the correct process and can complicate the procedure. If you do not know how to glue a protective glass on your phone, follow the steps:

Do not press too hard on the screen to remove small air bubbles. They will disappear on their own within a few days after the procedure. As a result, you should get a smooth, perfectly even screen coverage. Although the tempered glass on the phone is only 0.18 mm thick, it perfectly protects the device from mechanical damage.

Required materials and tools

If you have just purchased a smartphone, then it is important to understand how to stick protective glasses on your phone. The display of the device is very sensitive to mechanical damage. Being just in your. the gadget will be damaged by coins, nails or keys. Even the smallest scratches can lead to bubbles during application. The same goes for situations where you just want to replace your old phone protection.

  • alcohol wipe;
  • dry cloth;
  • special liquid for cleaning TV screens or computers;
  • scotch tape or dust collector;
  • glass.

In this tutorial, we have used Mocoll glass. And it’s not just that

When you sadly look at an iPhone whose display is covered with a pitiless mesh, it’s too late to think about protection. The manufacturer of protective accessories Mocoll took care of the consumer in advance.

All brand products are built in such a way that the buyer spends a minimum of time gluing the protective glass.

Considering that the Chinese brand Mocoll (our review) has been producing protective glasses for several years, the company’s engineers have thousands of hours spent in research laboratories.

Glasses are produced using high-tech equipment and in the process of processing they obtain a number of important properties. Mocoll glasses:

  • They are only 0.33 millimeters thick. The glass is uniform and of equal thickness at any point. Mocoll has one of the lowest manufacturing tolerances among glass manufacturers.
  • Mocoll glasses easily withstand the impact of sharp objects and do not shatter into fragments on impact.
  • Hardness at 9H on the Mohs scale. Higher only in diamond.
  • The glasses have an oleophobic coating, so after gluing you will not feel any tactile changes from interacting with the iPhone screen.
  • Mocoll supplies its products with a rich package. The set has everything to stick on glass without additional purchases and searching for a piece of fabric or a plastic card to eliminate bubbles.

Mocoll has several options for safety glasses at once. 2.5D, 3D and advanced development. 3D glasses with elastic edges to match the color of the device body.

As you can see above, it is very easy to install Mocoll safety glasses. Due to the presence of a special silicone layer, you can not worry about the appearance of hated bubbles during gluing.

Is it possible to re-glue the protective glass on the phone

High-quality surfaces for iPhone 5s and other gadget models can be reused. To do this, carefully remove the glass and treat the adhesive side with formic alcohol. Wipe it lightly with a cloth soaked in such liquid and let it drain for a while. Then set the protection according to the speaker and button. Expel air and liquid with light movements from the center to the edges. Small bubbles will disappear by themselves in a day.

How to properly glue a protective glass on a smartphone

For a beginner, the procedure may seem daunting, but a few workouts will make you a real specialist. It should be noted that there is no significant difference in whether we glue the protective glass on the iPhone 5, other phone models or a tablet. The procedure remains the same. It is better for an inexperienced person to start from the back of the gadget, and then move on to the screen.

Let’s get started

Cleaning up the iPhone display.

To do this, we use any microfiber cloth so as not to leave anything superfluous on the screen.

You can also use an alcohol wipe and then wipe the display with a microfiber cloth with a soft cloth.

Additionally, we clean the smartphone screen using the bundled tape or any other sticker.

Just touch the display with tape and lift it back up. The adhesive surface will collect dust residues.

Now you need to remove the protective film from the adhesive side of the glass and attach it to the screen.

Important: hold the glass by the edges so as not to leave unnecessary marks on it.

Place the glass gently on the iPhone screen.

If the glass is good, it will fit on the smartphone screen by itself. But for greater confidence, you can smooth it yourself.

We run our finger through the center of the smartphone and start smoothing until all bubbles are removed. If there are any small bubbles left, take a plastic card and, using light pressure, slide it over the areas where the bubbles are formed.

How to stick the protective glass on your iPhone yourself

Many iPhone owners try to treat the device as carefully as possible. For this, various covers, bumpers and protective glasses are bought.

Here we will tell you how to easily and quickly glue the protective glass without “defects” in the process.

How to do it

Remove the iPhone case before gluing the screen protector. If the iPhone display is already covered with old film or glass. feel free to remove it. Wash your hands thoroughly to avoid getting dirt on the screen.

It is best to glue in a well-lit place to see every speck that hits the screen of the device. Well, choose the cleanest surface for the glass sticker.

In this tutorial, we have used Mocoll glass. And it’s not just that

When you sadly look at an iPhone whose display is covered with a pitiless mesh, it’s too late to think about protection. The manufacturer of protective accessories Mocoll took care of the consumer in advance.

All brand products are built in such a way that the buyer spends a minimum of time gluing the protective glass.

Considering that the Chinese brand Mocoll (our review) has been producing protective glasses for several years, the company’s engineers have thousands of hours spent in research laboratories.

Glasses are produced using high-tech equipment and in the process of processing they obtain a number of important properties. Mocoll glasses:

  • They are only 0.33 millimeters thick. The glass is uniform and of equal thickness at any point. Mocoll has one of the lowest manufacturing tolerances among glass manufacturers.
  • Mocoll glasses easily withstand the impact of sharp objects and do not shatter into fragments on impact.
  • Hardness at 9H on the Mohs scale. Higher only in diamond.
  • The glasses have an oleophobic coating, so after gluing you will not feel any tactile changes from interacting with the iPhone screen.
  • Mocoll supplies its products with a rich package. The set has everything to stick on glass without additional purchases and searching for a piece of fabric or a plastic card to eliminate bubbles.

Mocoll has several options for safety glasses at once. 2.5D, 3D and advanced development. 3D glasses with elastic edges to match the color of the device body.

As you can see above, it is very easy to install Mocoll safety glasses. Due to the presence of a special silicone layer, you can not worry about the appearance of hated bubbles during gluing.

For every taste, color and wallet

Mocoll literally has glasses of all shapes and sizes. The range includes glasses for tablets and smartphones (and not only for Apple), there is also protection for MacBook.

Among the most interesting options is special glass with anti-glazing protection.

It works in such a way that after gluing, you can see what is happening on the iPhone display only strictly at a certain angle. That is, you, as the owner, can calmly correspond or watch a movie, and the passenger sitting next to the bus, with all the best will not see anything.

The glasses are designed in such a way that they refract the light emanating from the screen, making the picture inaccessible to others.

Mocoll glasses are very popular. Many service centers and workshops use accessories from this manufacturer. They are really very durable.

LLC “DVSOTA”
Location 690 018, Vladivostok,
Volkhovskaya str. 26a, office9.