How to find your YouTube TV code

Differences from a conventional remote control

The original remote control and the universal one have two significant differences that significantly increase the cost of the first one. this is its “brand” and quality.

The remote control made by the manufacturer-owner is undoubtedly of better quality than the Chinese one. However, if the TV is already 5-6 years old, then it will not work to find a branded remote control for such an old model.

What is a universal remote?

It sounds complicated, but in fact, this is a simple device that creates signal pulses suitable for most TVs and set-top boxes.

Huayu, Gal, DEXP, Supra are considered popular and high-quality PC manufacturers.

To configure them, special codes are used that differ depending on the brand of the TV, and you can see them on this page.

The universal model will suit a large number of common and popular manufacturing companies, for example, Samsung, LG or Philips.

How to set up a universal remote control

Each device comes with an instruction manual detailing the setup process. We will consider setting up models from popular manufacturers.

How to find the TV code?

The code is required to be able to associate third-party devices with it. Among them are remotes, smartphones or tablets.

It ensures device recognition and correct operation. Consists of a unique set of numbers that can be recognized in this file, as well as in the TV itself.

  • Login to YouTube;
  • open settings;
  • choose the ability to connect to the phone;
  • after entering the “Connect manually” section, a blue code will appear;
  • remember it or write it down.

Huayu

To configure it you will need:

  • Turn on the TV, point the UE at it and simultaneously hold down the power button and “Set”;
  • watch the indicator carefully, it should be on all the time;
  • set commands by adjusting the volume;
  • to exit the pairing mode. press the “Set” button.

Automatic adjustment:

  • Turn on the TV, point the remote control at it;
  • hold down the button for the type of device;
  • after the indicator lights up. release it;
  • press the power button on the UP, this will start an automatic code search;
  • as soon as the TV turns off, you must quickly press “OK”, this will save the code in memory.

Sometimes automatic search fails, so you need to set it up manually.

  • After turning on the TV and pressing the “TV” button, the indicator will light up;
  • after releasing it, enter the device code;
  • after entering the fourth digit, the code will be saved in the device’s memory, and the screen will turn off.

Auto tuning takes place according to the following algorithm:

  • Turn on the TV, point the UE at it, press the button denoting the TV brand;
  • hold down the “Set” button and hold until the indicator lights up;
  • click on the channel search, the automatic code search will start;
  • as soon as the indicator goes out, immediately press the “OK” button to save the found code.

If the button is pressed late, you have to do it all over again.

The plus is that with the help of enumerating channels, it is regulated in which direction the search will be performed.

Manual code entry should be started after pressing the “Set” button and the indicator comes on. Enter the found digits and click “OK”. The remote will remember the specified combination.

How to set up a universal TV remote codes

find, youtube, code

You may need a universal TV remote control for various reasons.

For example, to control multiple screens or due to breakage of a branded device.

In this article, I will briefly and simply explain how to set up the universal remote and where to find the codes from the TV.

Supra

Automatic tuning algorithm:

  • Turn on the TV, point the remote control at it and hold the Power button, release it after the indicator lights up;
  • if the setting is successful, a volume control bar will appear on the screen
  • turn off the device using the “Power” button.
  • Find the code for your device in the previously indicated table;
  • turn on the TV, point the UE at it, hold the Power button without releasing it, enter the found code;
  • only after the indicator has blinked twice. release the power button.

If after setting the universal remote control does not work, contact the seller or the service center, there may be a defect.

First, you need to double-check the codes and repeat the manipulations, sometimes mistakes are made when setting up.

Manual

Each TV has a personal code. It is in the manual for the model. After determining the value, you must:

  • turn on the TV router;
  • on the device, simultaneously press the “On” button and enter the model code in a separate window;
  • after the LED signal, release the button.

When the indicator goes out, you can freely use the TV.

Automatic

Press the combination of numbers “9999” on the remote control and deactivate the TV-modem. Automatic TV channel search will be displayed on the screen. It takes about 10-15 minutes. To pair the remote control with Toshiba:

  • start the device;
  • take the remote control in your hands and point it towards it;
  • click on the “Power” button and hold it for 5 seconds (after a couple of seconds the indicator will light up);
  • the volume icon will appear on the display;
  • adjust the sound on the device.

If the TV is working, then the parameters are set correctly.

If you have any questions or complaints. let us know

Setting up a universal remote for Toshiba TV

A universal device for technology is a special device that has a code base for connecting to a variety of TVs, air conditioners, ventilation, etc. The device can be selected by design, size and even shade. Popular brands of household appliances produce similar devices. The range of brands Samsung, Philips, Toshiba also has a remote control.

To connect the universal remote to your Toshiba TV, follow the instructions:

  • insert batteries into the device (some models are sold without power sources) or use a special battery, it will last much longer;
  • start TV;
  • on the device, click on the TV, DVD or PVR mode;
  • hold down the key for a few seconds (wait until the special indicator lights up);
  • run automatic configuration;
  • if the combination is known, enter it in a separate field for manual adjustment.

Next, we will tell you about the different ways of pairing the device with devices.

How to find the TV code

Each model of household appliances has a specific code for connecting with the UPDU. This data is freely available on the Internet or in the instructions for the technique. In order not to waste time looking for the right combination, we offer the current Toshiba TV code. To configure, you need to enter the following numbers. 059, 064, 123 (DVD).

How to set up a universal remote control for Toshiba: codes, instructions

“How to set up a universal remote control for a Toshiba TV?”. a question that interests the owners of the equipment of the same name. Manufacturers supply them with a special remote control. To simplify the use of technology, you can purchase a universal device that controls communications in an apartment or house. One device is enough to switch TV channels, audio equipment, turn off the lights, control the operation of the air conditioner. Thus, you will be able to control all devices that are equipped with an infrared beam. In this article we will tell you how to use the UPDU correctly. Using quick tips, you can quickly customize it based on your needs.

No code

You can configure the UPDU without a code. You will need to use the “autosearch” system. Follow these steps:

  • turn on TV and channel it;
  • simultaneously hold down the “TV” and “OK” keys for a few seconds and wait until the buttons light up;
  • gradually press the “CH” switch until the TV is turned off.

Search speed varies by TV model. Some find information in 2-3 minutes. In others, the process may take 20-30 minutes. Save the data to complete the operation. Otherwise, the parameters will not take effect.

How to find the TV code

To control the TV from the outside, it is important to know the Samsung TV code for the universal remote. This is programming the remote pointer to work together. It can be entered manually or scanned. To find out the personal meaning, open the manual for your Samsung device, or find the manual in electronic format on the corresponding website.

If not found separately in the manuals, then we use the device itself to search:

  • turn on TV;
  • press the TV and OK keys simultaneously and hold for 2-4 seconds;
  • press CH or CH– (move through the channel list) until the TV turns off;
  • after each click, wait 2-3 seconds, and then click again;
  • after reboot, press on TV, and save the combination for programming.
  • turn on the TV;
  • point the control tool towards the infrared port;
  • press and hold the TV and OK buttons for 2-4 seconds;
  • write the code using numbers;
  • click on TV to save;
  • come out.

Manual

First, take the remote control tool and insert the batteries. Start it by clicking on “Power” (usually the key is highlighted in red and located above the rest). Then simultaneously hold down “Return” and “Play / Stop”, hold up to 4 seconds and release. In this case, direct the infrared port to TV. After this action, the download window will start on the screen. this is “Search for devices”. After 1-2 minutes, the TV will find an autonomous remote control and ask to connect to it. Enter the code and complete the pairing.

No code

Authentication without a special code is possible if your TV device has these settings. Then use one of the above options to connect, just skip the step with the introduction of the combination.

Setting up a universal TV remote control for Samsung TV

There are two options through which it is possible to connect a universal remote control to a Samsung TV. manual or automatic. We focus on the fact that any universal remote control (remote control) channel works according to the same principle as a proprietary one.

Automatic

Turn on “Autosearch” in the settings, and dial “9999”. Do not release the last nine until the receiver shuts down. After enabling, the algorithm will be as follows:

  • point the remote control at TV;
  • hold “Power” for 3-5 seconds;
  • press “SET” and again “Power”;
  • Enter a code;
  • save;
  • come out. double tap on “SET”.

How to connect a universal remote to a Samsung TV: codes, instructions

Not all owners of this technique know how to set up a universal remote control for a Samsung TV. By default, a corresponding bullet goes to each device that can be controlled at a short distance. 90% of these gadgets have a special infrared port through which a connection is established. And each TV has its own remote control, so we select it, referring to the firm and model. But in recent years, universal controls have begun to gain popularity. It is about their work that we will talk about.

READ  How To Connect A Tablet To A TV Via Wi-Fi

Smartphones with universal remote function

In 2021, remotes built into smartphones are gaining popularity. Almost all modern gadgets have a built-in infrared port in the upper part of the case. That is, it is possible to download a virtual remote control there, and switch channels to TV. In some phones, they are built-in. Let’s take a look at Xiaomi as an example. You press the lock button, but do not unlock the screen. After that, make a swipe to the right, and you see the inscription “Mi Remote” on the screen.

Click on it. If you are using it for the first time, then below you see the inscription “Add”.

By clicking on it, the system offers to select the categories of equipment:

If you have any questions or complaints. let us know

  • Mi TV;
  • Mi BoX;
  • console;
  • air conditioning;
  • fan;
  • smart prefix;
  • AV receiver;
  • DVD player;
  • projector;
  • satellite TV or camera.

Choose a category, agree to the privacy policy and terms of use.

Then specify the brand and use the debugging guide.

How to watch YouTube on TV through your phone or computer

Instructions on how to watch YouTube on TV through an Android or iOS phone using the official free application of the service with the content broadcast function.

Separately, I will tell you how to broadcast an image to TV from a Mac or Windows computer, and how to enter the code through the YouTube.com/activate service to manually connect to your Google account.

As an example, we will connect iPhone to Samsung Smart TV. For devices from other manufacturers, the connection process is similar, the differences are only in the interface elements.

Installing the YouTube app

Connecting YouTube to your TV starts with installing the YouTube app. It also lets you stream videos from your mobile device to your TV. Streaming video via browser and YouTube.com only works on Mac and Windows computers.

YouTube app for Smart TV is free. You need to download and install it on your TV and phone (tablet), from which you will broadcast the video to the big screen. If you already have it installed, go to the second part of the article about pairing devices.

Installing YouTube on a Samsung, LG, Sony or Philips TV is very easy. Enough for TV to support Smart TV technology.

If you want to install YouTube on a TV without Smart TV support, you can use the Chromecast network media player (instructions for setting up and connecting). Chromecast works with all TVs with the YouTube app installed.

The YouTube application allows you to not only watch videos, but also broadcast videos from your phone or tablet to TV. Available on iPhone, iPod, iPad, any Android device, macOS and Windows computers.

  • App Store for iPhone, iPod and iPad.
  • Google Play for Android devices.

Similarly, you can install applications for game consoles Xbox One and Sony Playstation to stream video from the set-top box to TV.

After installation, log into your account on each device.

How to find the TV code

The location of the settings depends on the TV model and the version of the application installed on it. But the essence is always the same, the difference will be only in the interface elements.

Here’s how to find your YouTube TV code:

  • Open the YouTube app on your TV.
  • Go to settings by clicking the gear.
  • Select “Manual Connection” from the menu. The screen will show a combination of 12 digits.

If the numbers are not displayed or you see letters among them, restart the application.

If you turn off the TV, the code will change. Each time the application is launched, a new combination of numbers is generated.

It remains to enter this code on the device from which you plan to display the YouTube video broadcast.

How to enter the code from the phone

What to watch YouTube on TV through your phone, open the YouTube application and enter the numbers obtained above.

  • Go to your account by clicking on his avatar.
  • Open the “Settings” menu.
  • Select “Watch on TV”.

A window will open where you can enter the 12-digit digital code, which we received above.

It remains to click “Specify the code” and enter it.

We will learn about successful pairing with a smartphone by their pop-up notification at the bottom of the screen.

The video below explains step by step how to get a TV code and enter it into an Android smartphone. It is in English, but with Russian subtitles.

Entering the code on the computer

On a Mac or Windows computer, you need to follow the link to the pairing page https://YouTube.com/pair and enter the code from the TV.

After clicking the “Add” button, a message will appear about the successful connection of the TV to the computer.

If you see the error “Invalid connection code. Please try again later ”, get the code again and re-enter it in your browser. Please note that all this time TV and computer must be on the same Wi-Fi network.

Connecting devices

To watch YouTube from your phone on TV, you need to connect devices with the installed application to each other. Pairing can be done in one of two ways:

  • Automatic. connect both devices to the same Wi-Fi network and they will automatically find each other.
  • Manually by entering the activation code. used in the case when automatic detection does not work.

Auto pairing only works for mobile devices if they are connected to the same Wi-Fi network with the TV.

On iPhone, the process looks like this (for Android it is done in a similar way):

  • Open the YouTube app on your smartphone and select the desired video.
  • The content transfer icon is located in the upper right corner. When the phone and TV see each other, a blue “Watch on TV” pop-up message will appear.
  • Click on the message and at the bottom of the screen select your TV or AirPlay Bluetooth devices.

After selecting the big screen, the video will start playing on the big screen. Apple gadgets owners have access to the ability to broadcast video using the AirPlay protocol.

If you have a paid YouTube subscription, you can save videos on your phone and watch them on TV without the Internet offline.

Connecting your phone to the TV automatically may not work for a variety of reasons. A situation often happens when devices are on the same Wi-Fi network, but do not see each other point-blank.

In this case, the manual option with the activation code input will come in handy. Not everyone succeeds in entering the code from the TV, since the procedure is not intuitive.

  • On the TV we get a digital code.
  • We enter it on a phone, tablet or computer.

These two steps are independent of your TV, phone, tablet or computer.

Entering the code at YouTube.com/activate

This is an outdated method through an activator, which is still used by many to synchronize a YouTube account with TV.

To sign in, you need to follow the link https://YouTube.com/activate and enter the code from the TV in 2 steps:

  • Enter the numbers shown on the device and click “Next”.
  • Allow access to your Google account.

After clicking the “Allow” button, you will see a message about successful connection. Now you can watch YouTube on Smart TV from your phone, tablet or computer and enjoy videos on a big screen using your Google account.

If you still have questions about setting up YouTube on your LG, Sony, Samsung or Phillips TV, ask them in the comments.

How to find the stream key for YouTube broadcasts

YouTube is the best live streaming platform. It has everything for successful streaming: high quality video, fast recording, rewinding, and, most importantly, a huge audience

Before you start streaming with OBS, you need to find out the stream key for your broadcast. In this review, we will tell you where to find it on YouTube and how to get a link.

Here is the most up-to-date information !

Attention: Earlier (in the old version of the creative studio) it was possible in the following way

Where to get it from?. In the new creative studio

The OBS-Studio YouTube stream key we need looks like a link that leads to a specific broadcast.

In 2020, after the latest updates, the path to it looks like this:

Open the section “Creative Studio”.

Select “Live Streams” by going to “Broadcast Control Panel”.

In the “Broadcasts” tab, set all the data, scroll down the page, and click the “create” button

Next (immediately after clicking on the blue button) a window will open. and in it you will also see the key

By closing this window, you can also interact with the key

“Setting up the broadcast”, where you can take the stream key. To download it from YouTube, just select and copy.

That’s all. use it for health

Attention: Once again, we remind you that this is an instruction for the new version of the creative studio. !

Important: before getting the stream key on YouTube, make sure that this link belongs to the desired stream, each account and each broadcast has a separate code.

How to get views. Read

If you haven’t turned on the streaming feature yet

To start streaming, desire alone is not enough, you need to prepare a little:

  • Sign in to YouTube with your Google account.
  • Press Ξ at the top left, scroll down the menu and open “Settings”.
  • On the right, in the section my channel, click on the line “Channel status and functions”.
  • Here you can check the number of warnings (if any, you may not be given permission to stream).
  • In the section “Live broadcasts” click “Enable”.
  • An application for the possibility of streaming will be considered within 24 hours, after which you can see the result in the same block.

When everything is approved, you can start.

Additional software is required for convenient screen capture. The best way is to use OBS-Studio.

Install the program and then open it.

Open the “Broadcast” tab, then “Broadcast Type” and “Broadcast Services”.

Set the following values: service. YouTube, server. Primary YouTube ingest server. It remains only to fill in the “Stream key” field, you can take it on YouTube, in the channel settings. We will analyze where exactly the YouTube broadcast key is located and how to watch it.

Via the receiver menu

You can find out the ID through the receiver’s menu. To do this, you need to know the model of the receiving device, which is indicated on the front panel. It consists of a combination of 2-3 Latin letters at the beginning, then a combination of numbers and letters.

READ  How to find a lost TV remote

If you decide to view the ID in this way, then you may be required to enter your personal account

Information about models and how to find out the ID for a particular model can be found on the official portal at the link https://www.tricolor.TV/help/technical-issues/chto-takoe-ID/?sphrase_ID=2993575

You need to connect the receiver to the TV, where you can see the identifier that will be displayed on the screen. Using the remote control, you will need to perform the actions corresponding to the selected model. These can be such options:

  • Press “Menu” on the remote control, select the “Settings” section, then the “Conditional Access” item, then “Slot 1: DRECryptNP4”, then “Card Information”. In the form that appears, there should be a 12-digit ID next to the “Serial Number”;
  • On the remote control, you need to press the “ID” button or the “Tricolor TV” button. The ID should be displayed in the “Status” window;
  • Press the “Menu” button, then “Status” and “OK”. The line “ID number” must contain a 12-digit code;
  • Button “Home”, “Personal account”, submenu “Service status”. 14-digit ID.

Unlock Samsung Smart TV: TV pin code

There are two standard situations in which a pin code becomes necessary. the desire to block the TV and situations when it is already blocked, but the user has forgotten the password he entered. There are also times when a person changes the factory code, setting his own, and forgets about it.

If the device is locked, you can find out about it by seeing, instead of TV programs, a blue screen with a key or a field for entering a password displayed on it. Also, if you want to enable, for example, child lock, you cannot do without knowing the pin code. Regardless of the circumstances, in this case there is no unsolvable problem.

To unlock your Samsung Smart TV, you need a remote control (RC). Without it, the issue will not be resolved. The user needs to know a special combination of numbers. Sometimes, in extreme cases, you will have to go back to the factory settings, reset the channel settings and tune them again. In the most difficult cases, the wizard flashes the software on the Samsung TV again.

In most situations, the owners can cope on their own, without the help of specialists. This is especially not difficult if the instruction from the TV has been preserved.

How to connect the TV to the network using WPS

Wi-Fi Protected Setup, or WPS for short, is a more simplified way to connect to the Internet through a smart TV. As a rule, setting up a network connection, especially for users who are faced with such a task for the first time, turns into an unbearable problem, especially if the password is forgotten.

The peculiarity of this method is that there is no need to know the pincode. All the user needs is direct access to the router. In addition, you will need to carry out a few simple manipulations. In particular:

  • Go to the device menu, find the sub-item where the network parameters are indicated and select “Connect using WPS. PBC”;
  • Then, without wasting time, go to the router, find and press the button on it with the inscription “WPS”. This should be done quickly, before two minutes have passed. Although, before proceeding with this procedure, it is recommended to make sure that the device supports this function by default. If you are not sure, go to the web interface and connect it. As a rule, this key is very small, and is located on the back of the device, so examine it carefully;
  • If everything is good, then in a second the Internet network will be connected on the TV.

It is worth clarifying that you can configure the Internet in this way only if the device has a standard pin, that is, the factory settings have not changed. If the router is not new, then the settings can be reset to factory settings using the “Reset” key. To make it work for sure, it is advisable to hold the button for a few seconds.

In order to connect to the network without knowing the standard password, you can enter the PIN of the router. Then the connection will be more secure, and the owners of the TV will be able to use Internet content without the help of a computer or smartphone.

In order to use this function you will need:

  • Go to the menu and select “Network”, taking the sub-item “Connect using WPS-PIN”.
  • Here you can also find out a special code that will appear on the screen. It should be entered into the router settings. This is done as follows:
  • Connect to the router interface;
  • Select the menu with WPS settings;
  • Click the “Add Device” button.
  • Then enter the password that appears on the TV. It is only very important to have time to do this before the numbers disappear. If you don’t have time, you will have to repeat the procedure, since the former password no longer fits. So, as soon as the procedure comes to an end, click on “Connect using WPS-PIN”, and use the new data.

Having started to enter the correct parameters, the TV immediately connects to the network, and you can already work on the Internet. If something went wrong, then, of course, the device will not have an outlet to the network. Thus, if there is no window that confirms the successful connection of the device, you should repeat the procedure or restart the TV. Perhaps this is the case.

Many people think that if you do not use a standard password, the connection will be insecure, but this is not the case. Also, not everyone knows where to find the WPS PIN code for LG TV, as well as for TVs of other brands. But the fact is that the code is generated randomly and is used only during one connection.

The name of the network does not change, but the value of the identification number is yes. In addition, it can be assigned only if all the settings of the router have been “reset” to the factory settings. Nevertheless, this method of connecting to the network has one, but a significant drawback. the code is too long and complex, which is very inconvenient.

Rate this: (votes: 1, average: 5.00 out of 5).

On Smart Card

Now let’s figure out how to find an ID on a Smart-card. A Smart-card is included with the equipment. The card can be internal and external, depending on the model of the Tricolor receiver. It is a plastic card with a chip that contains all the information about the client.

The ID of the external Smart-card Tricolor TV is located on the card itself, usually under the barcode. If the card is built-in, then the required identifier is written on the body sticker or in the warranty card.

How to find the PIN code on the TV

When using TV equipment, an unpleasant situation may arise when the user forgets the password from the device. How to find out the pin code from an LV TV and Samsung and find out.

  • 1 Forgot your pin code from Samsung
  • 2 Forgot your LG TV password

4 simplest ways to find out the ID of the Tricolor TV receiver

Tricolor TV is a digital satellite broadcasting company for television throughout the country. When purchasing equipment from this company, in order to receive the necessary service, the client must connect the devices and register in the system in order to conclude an agreement. An important point during registration and further use of services is the presence of an identifier of the receiving equipment. Each company tries to protect its products as much as possible from illegal use, so the presence of complex combinations is a must in the protection of information. Consider how to find out the identifier of the Tricolor TV receiver.

Through a subscription agreement

You can find out the ID number from the concluded subscription agreement. See the agreement in the upper right corner. The receiver ID can be found there. The field in which the number is registered is called “ID of the receiving equipment”. Do not confuse with the number of the subscription agreement.

However, if the contract is not at hand or you have not concluded it yet, and you are going to register online, you will have to find out where else to find the identifier.

Forgot your LG TV password

Different companies set different codes on TVs and the methods of resetting to factory settings are different. Therefore, it makes no sense to carry out such an operation using the Samsung TV method. The standard pin-code on LG TVs is 0000. But in some cases you can try another option. 1234. If you need to unlock the TV with basic settings, you just need to enter these combinations and enjoy watching. Problems arise when a user forgets the password he invented.

If the standard TV pin-code was changed to an individual one, and then it was forgotten, then the solution to this problem is to press the menu button, go to the settings, select the “Security” section. There should be a function to reset the pin code. Next, you will need to set a new password on the TV.

After the completion of the operation, you will have to do a few more steps:

  • Enter any numbers and confirm them by pressing the OK key.
  • Drive a combination: up, up, down, up.
  • Set the password 0313 and press the OK key.

After completing these actions, the pin will become standard. The method is useful if you have access to the menu.

Otherwise, you will need on the push-button remote control:

  • press the power button and turn off the TV;
  • enter the combination: Mute, 8, 2, 4;
  • turn on TV.

The procedure on the Smart remote to unlock the TV if you forgot your password:

  • turn on TV;
  • Press Mute, Volume Up, Return, Volume Down, Return, Volume Up, Return.

How to find the PIN on the TV Link to the main publication

How to find your TV model (TV)

Good day!

Recently, questions about TV have become more frequent (perhaps this is due to the imminent transition to digital).

And one of the fairly popular “problems” is associated with determining the exact model and series of the TV. By the way, this can help not only to find out support for the DVB-T2 format, but also:

  • to search for the original remote control;
  • to download a new firmware (and this can provide new opportunities, eliminate a number of glitches);
  • to call the master (in case of device breakdown);
  • to get those. specifications for TV (to find out / clarify its capabilities).
READ  Sony TV Tune Channels Via Antenna

In general, below I will present several methods that I have used more than once myself (by the way, they are relevant for different device models: Samsung, LG, Philips, etc.).

Defining the TV model

sticker on the back of the TV

This is perhaps one of the easiest, most reliable and fastest ways to find out the model of the device (even if it is broken or does not turn on). I draw your attention to the fact that you need to look for a similar sticker on the back of the TV, not far from various ports: HDMI, USB, etc.

My example shows how it looks for model 32LJ500V-ZB.

By the way, if it is difficult to get to the sticker (for example, if the TV is fixed on a bracket and hangs on the wall), you can take a picture of it with a smartphone, and then enlarge the photo and watch.

through the device menu

If the TV is turned on and working, then the TV model and series should be presented in the settings menu (provided that your device is new enough).

1) First you need to open the settings (usually, this is the Settings button on the remote control).

2) Next, go to the “System information / software version” menu.

  • TV model and type;
  • software version;
  • support center phone number;
  • home page (and other information).

1) First, you also need to open the settings menu and go to the subsection “Support / Contact Samsung”.

2) In this information window, you will see all the necessary information: software version, model code, QR code, etc.

When watching TV programs, press the buttons on the remote control in sequence: 123654. Next, a “blue” menu will appear on the TV screen, the first line of which will indicate the model of the device.

using QR code

New monitors and TVs of 2019 are now often glued with a QR code, which can be read in the blink of an eye on a smartphone and find out not only the model of the device, but also immediately get a link to the official support site.

those. documentation

If you still have those. documentation or operating instructions (these things always come with the TV set). they almost certainly contain information about the model. One of the examples is shown in the photo below.

TV box sticker

On the box from under the TV (as well as from under monitors, laptops, etc.), you can usually also find stickers and information windows from those. device characteristics.

However, the method is not very reliable, since almost no one keeps big boxes at home.

WPS PIN for LG TV

Connecting a TV to the Internet no longer seems like a crazy idea, because manufacturers are trying to keep up with the times and produce modern, high-quality, and most importantly, multifunctional devices. But to unleash their full potential, a Smart device requires an Internet connection. This can be done in one of two ways:

  • Using a LAN cable;
  • Using a Wi-Fi wireless network.

In our case, it is better to use Wi-Fi, because it is really more convenient, since there are no boring wires and other not very convenient paraphernalia. And as soon as the connection has been made, the TV is completely ready to use. But to prevent other users from using your work, the connection is protected with a password. It is recommended to come up with a complex PIN so that no unauthorized person can use it, because the more devices are connected, the weaker the signal can be.

How to connect the TV to the network using WPS

Wi-Fi Protected Setup, or WPS for short, is a more simplified way to connect to the Internet through a smart TV. As a rule, setting up a network connection, especially for users who are faced with such a task for the first time, turns into an unbearable problem, especially if the password is forgotten.

The peculiarity of this method is that there is no need to know the pincode. All the user needs is direct access to the router. In addition, you will need to carry out a few simple manipulations. In particular:

  • Go to the device menu, find the sub-item where the network parameters are indicated and select “Connect using WPS. PBC”;
  • Then, without wasting time, go to the router, find and press the button on it with the inscription “WPS”. This should be done quickly, before two minutes have passed. Although, before proceeding with this procedure, it is recommended to make sure that the device supports this function by default. If you are not sure, go to the web interface and connect it. As a rule, this key is very small, and is located on the back of the device, so examine it carefully;
  • If everything is good, then in a second the Internet network will be connected on the TV.

It is worth clarifying that you can configure the Internet in this way only if the device has a standard pin, that is, the factory settings have not changed. If the router is not new, then the settings can be reset to factory settings using the “Reset” key. To make it work for sure, it is advisable to hold the button for a few seconds.

How to connect to Wi-Fi using WPS-PIN

In order to connect to the network without knowing the standard password, you can enter the PIN of the router. Then the connection will be more secure, and the owners of the TV will be able to use Internet content without the help of a computer or smartphone.

In order to use this function you will need:

  • Go to the menu and select “Network”, taking the sub-item “Connect using WPS-PIN”.
  • Here you can also find out a special code that will appear on the screen. It should be entered into the router settings. This is done as follows:
  • Connect to the router interface;
  • Select the menu with WPS settings;
  • Click the “Add Device” button.
  • Then enter the password that appears on the TV. It is only very important to have time to do this before the numbers disappear. If you don’t have time, you will have to repeat the procedure, since the former password no longer fits. So, as soon as the procedure comes to an end, click on “Connect using WPS-PIN”, and use the new data.

Having started to enter the correct parameters, the TV immediately connects to the network, and you can already work on the Internet. If something went wrong, then, of course, the device will not have an outlet to the network. Thus, if there is no window that confirms the successful connection of the device, you should repeat the procedure or restart the TV. Perhaps this is the case.

Many people think that if you do not use a standard password, the connection will be insecure, but this is not the case. Also, not everyone knows where to find the WPS PIN code for LG TV, as well as for TVs of other brands. But the fact is that the code is generated randomly and is used only during one connection.

The name of the network does not change, but the value of the identification number is yes. In addition, it can be assigned only if all the settings of the router have been “reset” to the factory settings. Nevertheless, this method of connecting to the network has one, but a significant drawback. the code is too long and complex, which is very inconvenient.

To disable child lock and to access apps and settings

do the following.
Press the Home button on the TV remote control and select:
[Child lock] (Parental Rating) settings
Or
Press the Settings button on the TV remote control and select:
[All settings] (Child lock) [Parental Rating]

You can turn off the parental control function by selecting None if you do not want a child lock.

Answer

PIN code is required to access certain TV functions or settings if Parental Control is enabled.

channels 18

In addition, the service provider blocks some channels (18) by default (in line with the 2017 M7 certification requirements). These channels can only be accessed after entering the PIN code specified during setup or after entering the code “8888”. Unable to remove or disable blocking of this channel

4K Ultra Slim Smart LED TV

The four-digit PIN code prompt appears on the TV screen in one of the following cases:
when reinstalling channels;
when changing settings in the TV menu;
when choosing an application or TV channel.

reset the PIN on the TV and turn off the child lock

do the following.
Press the Home button on the TV remote control and select:
Settings [Child lock] [Change code / Set code]
Or
Press the Settings button on the TV remote control and select:
[All settings] [Child lock] [Change code / Set code]
Enter your old PIN if it has already been set.
Enter new PIN.
Enter the new PIN again to confirm.

PIN code for unlocking the parental control function has been changed to a new one.

In the same menu, select [Parental Rating] No. The TV will ask for the four-digit PIN again. Enter the new code selected in the previous step.

What to do if the PIN cannot be changed?

If you forget your PIN, you can enter “8888” in the [Change code] parameter to set a new PIN.

If the PIN cannot be changed after entering “8888”, reinstall to restore all previously selected TV settings.

How to reinstall your TV?
Press the Home button on the remote control, scroll down the list and select:
General Settings Reinstall TV.
Or
Press the Settings button on the TV remote control and select:
[All settings] [General settings] [Reinstall TV].

Note. Typically, only one PIN can be set on Philips TVs (to restrict viewing). If the parental control function is not turned on, and the TV still asks for a PIN code, it may be:
PIN code for the CAM module;
PIN code for external device.

These PIN codes are not specific to the TV. Contact your broadcaster for further support.

The information on this page applies to the following models: 50PUS6162 / 12. 55POS9002 / 12. 50PUT6162 / 12. 65PUS7502 / 12. 65PUS6412 / 12. 49PUS6482 / 12. 65PUS6162 / 12. 55PUS7502 / 12. 49PUS7502 / 12. 43PUS6262 / 12. 55PUS6482 / 12. 55PUS6262 / 12. 50PUS6262 / 12. 49PUS6412 / 12. 43PUS6412 / 12. 49PUS6162 / 12. 55PUT6162 / 12. 55PUS6412 / 12. 55PUS6162 / 12. 49PUS6262 / 12. 43PUS6162 / 12. 43PUT6162 / 12. Click here to see more product numbers Click here to show fewer product numbers