How to enable NFC on iPhone 6

Table of Contents

NFC on iPhone

Apple was one of the first to integrate contactless technology into its smartphones. It will be useful for users to know contactless communication. what it is, is there NFC in the phone, how to enable this function on the iPhone, and what additional settings may be needed.

NFC capabilities in iPhone

A contactless communication chip built into the working stuffing of the phone opens up to the user extended possibilities of using short-range signals:

enable, iphone

Technical parameters of the chips in the iPhone

Parameter Unit measurements Value
Minimum interaction distance cm 0.5
Maximum interaction distance cm 20
Data encoding method Manchester
Baud rate cbaud 424
RF signal frequency MHz 13.56
Connection mode Passive: receive only

The milliseconds during which the connection is established and the operation is performed, as well as the small radiation radius, allow NFC technology to be classified as a safe method for transferring confidential data from device to device.

What is NFC in iPhone

An NFC chip is a small, flat (round or square) chip made of flexible materials. The compact size allows the chip to be mounted even in ultra-thin iPhones. The activation and interaction technology is based on the generation of an electromagnetic field over short distances. Generation is carried out through a special loop antenna installed both in the source and in the consumer. Contactless function is not available for all iPhones.

iPhone 6 NFC Test. Testing NFC-Tag scanning

Option is supported by models from iPhone 5s and up.

NFC setup

The NFC option on iPhone 6 and later does not require special signal activation. Built-in chip automatically generates and receives radio wave message when approaching an active or passive source.

In the case of iPhones, manual activation and optimization of contactless communication is not required.

But in order to activate the capabilities, a number of actions are required.

Payment function activation:

  • Set identification and security features for Touch ID, iCloud.
  • Sign in to the Wallet app.
  • Find and activate the “Add Card” action.
  • Enter card details manually or take a photo of it.
  • Print holder’s name, expiration date and CVV code.
  • Confirm the correctness of the data via the code from the SMS.
  • Wait for the message “Card activated”.
  • Installing the NFC Writer software.
  • Scanning a tag.
  • In the Tag Emulation field, enter the ID number of the tag.
  • Activating and ending emulation.
  • The tag is paired with a device.

The article contains information on what the contactless option in the iPhone is, what are its capabilities and technical parameters, which models of iPhones are equipped with a built-in chip, how to enable NFC on the iphone, and what additional steps are required to start using the full functionality The number of applications and additional services for iPhones is not yet as diverse as for Androids, but developers are actively working to expand the possibilities of using contactless communication in Apple gadgets.

Enabling or disabling location services for specific applications

This may display explanations about how programs use your location information. Some programs can only offer two options. Learn more about privacy and location services.

In this article, we will look at such a useful feature as geolocation. It is present on all modern devices, is an integral part of the work of many programs: weather widgets, navigators and others. The presented instructions are useful for owners of iPhone 4 version and newer Apple devices.

Geolocation (geolocation) is a special tool that tracks the location of the phone on the ground. The provided data is used by maps to build a route, weather applications to provide accurate weather forecast data in a specific area, a camera to record the coordinates of the point at which a particular picture was taken.

Without access to geodata, programs that use the device’s location are imprecise and useless. Therefore, immediately after entering the application, the smartphone can notify its owner about the disabled location function. There are several ways to activate it.

What to do if geolocation is always on on iPhone

If the function works on an ongoing basis, it means that some application, without the knowledge of the owner of the device, uses data about the location of the device.

  • Go to “Settings”. “Privacy”. “Geolocation Services”.
  • In the list of applications using geodata, we identify the one opposite which is marked “Always”.
  • Change the access level to “Never” or “When using the program”.

There can be several programs with permanent access to geodata. Review the list carefully before setting up.

Geolocation settings

In the list, you can see programs with different levels of access to location information:

  • “Never”. the application does not receive any information about the location of the smartphone;
  • “While using the application”. the application uses location data only during its active work, and does not use information in the background;
  • “Always”. the application uses geolocation even in the sleep mode of the smartphone.

Many programs additionally request permission to use location data. By clicking on the “Allow” button, the user opens the software access to the information of the geolocation services. If the option “Do not allow” is selected, the program will not use the location without a preliminary request and receiving a satisfactory answer.

How to set up geolocation on iPhone

So, in order to enable geolocation on the iPhone, you first need to go to the “Settings” application. To do this, just click on the corresponding icon on the iPhone desktop.

After that, you need to go to the settings section called “Privacy”.

Next, you need to open the subsection “Geolocation Services”, it should be at the very top. If geolocation is turned off for you, then “Off” will be indicated in front of this subsection.

After that, the geolocation settings will open in front of you. In order to enable geolocation, simply move the switch to the “On” position.

After enabling geolocation services, a list of programs that use or do not use geolocation will appear at the bottom. If “Never” is indicated next to the program, it means that the use of geolocation is prohibited for this program. In this case, the program will not be able to use geolocation, even if Geolocation Services are enabled. In order to enable geolocation for such a program, you need to open it in this list and change the value “Never” to “When using the program” or “Always”.

At the bottom of the list of applications there is a section called “System Services”.

In the “System Services” section, additional geolocation settings are available on iPhone.

Here you can turn on or off Apple’s geolocation-based ads, geolocation-based alerts, and other similar features.

Here’s how to turn location and GPS services on or off for individual programs.

How to find an iPhone with geolocation enabled

A lost smartphone with geolocation enabled can be found through the pre-configured Find iPhone function.

  • Go to “Settings”. “Username”. iCloud.
  • Find the section “Find iPhone”.
  • To activate the function, move the sliders “Find iPhone” and “Last location”.
  • Enter your Apple ID when prompted to sign in.

You can track your phone through the iCloud desktop site.

    When entering, enter the account data: Apple login Remotely, you can send a sound signal to the iPhone, send a message to the phone number with a request to return the device to the owner, completely block the smartphone.

Enabling smartphone settings

To enable recording of smartphone geodata, we will follow simple steps:

  • Go to iPhone Settings.
  • Go to the section “Confidentiality”. “Geolocation Services”.
  • We activate the location recognition function by moving the switch to the “On” position (the switch will turn green).
  • Scroll down the menu to the list of all applications using smartphone geodata.

From now on, we proceed to configuring this service.

How to enable location data on iPhone 6

Many iPhone apps require geolocation to be enabled during their operation. These are usually applications that provide information based on your location. For example, applications for navigation or monitoring local weather cannot do without properly configured geolocation. In addition, other applications need geolocation data. For example, with geolocation enabled, the camera can record the coordinates of the point where the picture was taken.

In this article, we’ll show you how to enable geolocation on iPhone. The article will be useful for owners of almost all iPhone models, including iPhone 4, 4s, 5, 5s, 5c, 6, 6s and 7.

For new devices

Can’t send MMS from “iPhone 6”? MTS or any other operator. this is not so important. After all, the principles of setting up a service are the same for all companies.!

Often, problems with sending multimedia messages appear on new smartphones. Wondering how to enable MMS on an “iPhone 6” that turns on with a new SIM card for the first time? The answer will not keep you waiting!

The point is that when a new SIM card is connected and the device is first registered in the network, the user receives a special message from the operator. It is necessary for setting up mobile Internet and MMS exchange. You will need to open the letter and select the “Save” function there.

Sometimes it doesn’t work. Then, as already mentioned, you need to manually enter the connection settings. The relevant information is specified with the mobile operator.

Factory settings

But what if even the listed actions could not bring the option back to life? How to enable MMS on iPhone 6? You can try to return your smartphone to factory settings. Sometimes this technique really helps.

To reset the gadget to factory settings, you need:

  • Go to “Settings”. There visit “Basic” and select the menu item “Reset”.
  • Click on “Reset network settings”.
  • Confirm actions and restart mobile phone.
  • Remove the SIM card and insert it into the iPhone again.

Usually the trick is very effective. If it does not help, it is recommended to contact your cellular operator to resolve the problem. Or take the “iPhone 6” to a service center. It is possible that this is where the owner of the “apple” smartphone will be able to help.

Enabling MMS at “MTS

How to set up MMS on iPhone 6? “MTS” offers the following data for the successful operation of the function:

  • APN. mms.mts.ru;
  • name and password. mts;
  • proxy. 192.168.192.192.8080.

This information must be typed in the appropriate fields on the iPhone in the “Cellular data network”.

Connection tips

Before connecting the mentioned option, you need to make sure that the entered data is correct. The MMS function in “iPhone 6” will not work if the network is not configured correctly.

How can I make sure that the settings are correct? To do this, you must adhere to the following instructions:

  • On iPhone, visit “Settings”. “Messages”. Go to the “MMS” section. Check if this option is enabled. If not, you must turn the switch to the On position.
  • In the smartphone settings, look in “General”. “Cellular data”. Activate this option in a similar way.
  • Check the availability of the Internet on the gadget. It is best to start your browser and try to load a particular page. If everything works, it is recommended to move on.
  • How to enable MMS on iPhone 6? When all the above steps are completed, you can simply remove the SIM card from the smartphone and put it back in.
  • Restart your phone. It’s hard to believe, but sometimes this technique helps to restore the functionality of most services.

It also happens that all the steps listed above did not help. You can enable MMS on “iPhone 6” (“MTS” or any other operator. Not so important) by making adjustments to the network settings.

How to enable MMS on iPhone 6? Instruction and description

iPhone is used by many modern gadget owners. This is a very common device with a variety of settings and capabilities. Today we have to figure out how to enable MMS on “iPhone 6″. What does each owner need to know for this? Why can there be problems with the service? All this will be discussed further. Dealing with the questions posed is easier than it might seem. Even a novice user will be able to bring the idea to life.

READ  Where does iPhone memory go?

Data validation

How to do it? Everything is easier than it sounds. Especially if the user has data for MMS and the Internet in general. What it boils down to to check if the network settings are correct?

You must adhere to the following actions:

  • Switch on your mobile phone. Wait until it is fully loaded and ready to go.
  • Go to the section “Settings”. “General”. “Cellular data”.
  • Click on “Cellular data network”.
  • Scroll down the page. There will be a field for working with MMS. Enter the correct data to work with the cellular network. They must be checked with the operator. An example will be given later for “MTS”.
  • Save changes.

That’s all. As soon as all the above steps are completed, the smartphone will start working with MMS. iPhone is configured to transfer media this way.

Sources of problems

First, you need to understand why MMS are not sent from “iPhone 6”. MTS or any other operator. this is not so important. The main thing is that the reasons do not depend on the chosen mobile company.

The most common cause of problems with MMS is broken or missing network settings. In this case, you will have to reset the parameters and enter the correct connection information.

Sometimes malfunctions are caused by a malfunction of Wi-Fi or the Internet in general. You need to find out why the network is not available. Restoring it will bring MMS back to work.

Many people are wondering how to enable MMS on “iPhone 6” due to changes in the operating system interface. The usual “Create MMS” link is not here. So you have to try hard to send a multimedia message to iPhone.

Now it is clear how the MMS function is turned on in the “iPhone 6”. Similar recommendations and advice are suitable for all “Apple” smartphones and mobile operators. It is impossible to say for sure which method will help restore MMS functionality. It is recommended to start by restarting your phone. Further. check the performance of the network, only then proceed with the connection settings.

What if all the listed recommendations did not help bring the idea to life? In this case, it is preferable:

  • Take the problem “iPhone” along with the SIM card to your mobile network operator. It is not excluded that the company’s employees will help to arrange the transmission of multimedia messages. Not?
  • Then you can safely carry the “apple” smartphone to the service center. Most likely, the violations in the transmission of MMS are caused by some kind of breakdown, which could not be eliminated on our own. For a certain fee, the service center employees will diagnose the device, then eliminate the reason for MMS refusal to work.

You can insert the SIM card into another phone, save the network settings there, and send a test multimedia message. Everything works? Then the problem really lies with the iPhone. Not? In such circumstances, problems with a cellular operator or a SIM card are not excluded.

In any case, it is now clear how you can enable MMS on the “iPhone 6”. In reality, everything is much simpler than it seems. The main thing is to know the data for setting up the network and follow strictly the instructions for correcting this malfunction using different methods.

What are we going to do to make NFC work as intended?

Many good wireless headphones and portable speakers have NFC support. In 99% of cases, it allows you to skip the pairing procedure through the Bluetooth menu. Just bring your smartphone to the accessory. and you’re done.

Apple has blocked NFC in iPhones for a very long time for any purpose other than Apple Pay, so iPhone owners have long been accustomed to ignoring the feature in all accessories. Now let’s get out of the habit.

Thanks to the instructions below and the iOS 13 Commands, you can use NFC in your headphones and speakers to connect your iPhone to them with one swipe without any Settings or menus at all.

How to enable real NFC on your iPhone in 1 minute

Today I will tell you how to make NFC on iPhone really useful. Not even so: we will actually turn it on.

The iPhone has had the module itself for many years, and it is completely freely used by the Apple Pay contactless payment system.

But if you try to connect any NFC accessory to your iPhone, you will be disappointed. precisely, it waited until the last moment.

By default, iOS ignores NFC tags in wireless headphones and portable speakers. the ones designed for quick connections. It’s a pity, because it’s very convenient: you bring the headphone case to the iPhone, and it automatically connects to your “earplugs”.

Android has done this since time immemorial, so why are we worse? It turns out to be almost nothing. thanks to Commands in iOS 13.

Iphone 4, 5, 6: Where is NFC / S Beam / Android Beam? AIRDROP!!!!

I was pleased with the positive reaction to the previous post about automating the connection of Airpods to Apple gadgets. Anyway, Commands in iOS 13 is a really powerful tool, learning which brings tangible benefits.

So I decided not to stop and offer you something cooler.

Instruction. We turn on the connection to headphones and speakers via NFC

▸ iPhone with iOS 13. iPad won’t work, iPod touch too, they just don’t have NFC

▸ wireless headphones or speakers with an NFC tag. If the accessory does not have an NFC tag, it doesn’t matter. Even your bank card can serve it, as I wrote about here

How do you know if your accessory has NFC? The NFC emblem is applied to the body of the accessory next to or directly above the location of the tag. For successful pairing, it must be directed towards the back of the smartphone. The range is low and is a maximum of a couple of centimeters.

Before starting the setup, make sure that the accessory is connected to your gadget right now, this is important. Go.

Open Commands and go to the Automation tab. If accidentally deleted, just download again from the App Store.

Click on in the upper right corner or immediately select Create automation for yourself.

In the list that opens, scroll down to the NFC item. Tap on Scan opposite NFC Tag.

We bring your headphones or speakers with the NFC tag to the upper part of the back of the iPhone. where it has a camera.

Nothing happens? Do not make any sudden movements and hold the mark under the iPhone for at least a second before moving it. for some reason, the initial recognition of a tag in iOS 13 takes much longer than it will take after setup.

You can also use any NFC tag, not just the one built into your headphones or speakers. In addition to bank cards, a pass from the office or an NFC sticker from AliExpress can serve as a tag. Thus, the quick connection function can be added to any Bluetooth speaker. The main thing is not to lose the mark itself.

As soon as the iPhone finds the tag of the accessory, it will offer to name it. Write and continue.

Now we add a new action that will be performed when the iPhone finds this NFC tag. Select Scripts, scroll down and click Set Playback Location.

In the list that opens, select headphones or speakers that will connect to the iPhone when you bring it to the NFC tag. In my case, these are Sony WF-1000XM3 headphones.

If there is nothing in the list, you have not connected the accessory to the iPhone in advance. Do this and return to the current point of the instruction.

We’re almost done. It remains only to disable the Ask before launch option and confirm your choice.

Now, every time you bring your iPhone to the included headphones or speakers, they should connect to each other.

Unlike Android, iPhone cannot be forced to connect to unknown (previously unpaired) devices through the Automation we just created. We are waiting for iOS 14 and further indulgences for NFC from Apple.

Why NFC doesn’t work on iPhone 6?

How to find out if NFC is not working on iPhone

If nothing happened after you held the iPhone to the terminal, most likely the problem is in the antenna part. Another thing is if the BGA soldering under the NFC chip is broken or it is out of order. Then it will be impossible to add cards to Wallet and activate the iPhone after flashing.

How to find out if NFC works on iPhone?

After you finish binding the card, check the operation of NFC. To do this, go to the iPhone settings. Go to the wireless settings. Find Near Field Communication in the list and make sure the technology is enabled.

How to turn on NFC mode on iPhone?

Instruction. We turn on the connection to headphones and speakers via NFC

  • Click on in the upper right corner or immediately select Create automation for yourself.
  • In the list that opens, scroll down to the NFC item.
  • We bring your headphones or speakers with the NFC tag to the upper part of the back of the iPhone. where it has a camera.

How to check if the NFC module is working?

  • Open “Settings”, go to the “” section. If the near-field communication function is available, you will see the NFC column, and below the Android Beam.
  • Check the box to activate. both functions will turn on at the same time.

How to pay by card using iPhone?

  • Go to the Wallet app and tap.
  • Follow these steps to add a new card. Watch a demo video.
  • Click Next.
  • After the bank or card issuer verifies the card, click “Next”.

How to Pay Apple Drink on 11 iPhone?

iPhone with Touch ID: Hold your device close to the reader without touching the Touch ID sensor with your finger. When the default card appears, tap it, then tap to select a different card. Place your finger on the Touch ID sensor to pay. Apple Watch: Double-click the side button.

How to set up an auto answer on your phone: instructions for Android and iPhone

Modern touchscreen phones and smartphones amaze their owners with a huge number of very different functions. Users may not even be aware of the existence of many of them. One of these features is the automatic answer to an incoming call. Almost all flagship models of well-known brands have this function. Who will benefit from the automatic reply feature? How do I set up an auto answer on my phone? How to turn off auto answer on Android and turn it on on iPhone? We will consider these and other issues related to automatic call acceptance in this article.

How to enable / disable auto reply on Android

Even a user who is not at all friendly with gadgets will not be difficult to enable auto-reply on Android. In order to activate the mentioned function, you need to go through the following path in the smartphone menu:

Settings → Applications → Call → All calls → Answer mode

In the last submenu, the function appears to put a check mark in front of the “Automatically in seconds” function. In the same way, you can turn off auto-reply.

In some cases, calls will continue to be answered automatically even if this feature is disabled. Sometimes auto-answer on Android can be done by activating another option “Motions and gestures”. It can be disabled by going through the following path in the settings:

The latter function is responsible for controlling the smartphone without touching, it is they who can sometimes automatically receive calls. To avoid this, it is worth deactivating this function as well.

Why do I need an automatic answer to an incoming call?

Auto answer is a smartphone function that allows you to receive incoming calls automatically after a certain time. Thus, in order to answer a call, the user of the gadget does not need to press the call accept button or perform any other manipulations. After a specified time, the gadget will automatically answer itself. Such a function will be useful in the following cases:

  • With a continuous workflow. For people whose profession is connected with an unbreakable workflow that does not allow or makes it inconvenient to receive a call distraction, an auto answer will be very relevant. A person does not need to stop a workflow in order to receive a challenge. The smartphone will do it itself. To optimize the automatic response process, the owner of the gadget is recommended to use a headset.
  • If it is impossible to manually answer the call. Not only at work, but also in everyday life, the user is often uncomfortable answering a call. while driving a car or while riding a bicycle; in the case when you need to take off your gloves or get your phone out of your bag in the cold; wash your hands to accept a call or perform any other inconvenient activity. So that the user’s time is not wasted on unnecessary manipulations, and touch phones remain clean, auto-answer on iPhone and Android will come in handy.
  • For people with disabilities. One of the main groups of users for which this function was developed is people with disabilities. In some cases, this function is the only possible way to answer a call.

Such a function can be both useful and vice versa. to bring only discomfort to the user and create awkward situations. For example, an incoming call can be automatically answered even when the owner of the smartphone did not hear the call. In this case, the gadget continues to lie in its place (in a. bag, next room), and the other subscriber is already connected and hears only the noise in the receiver. That is why later in the article we will look at how to set up an auto answer on your phone and how to turn it off if necessary. And how a modern smartphone works while receiving a call, you can find out in the article by the link.

READ  How to Broadcast WhatsApp on iPhone

How to enable / disable auto answer on iPhone

All iPhones with iOS 11 support auto-answer. You can customize it by going through the following path:

Settings → General → Accessibility → Sound Source → Auto Answer Calls

When the function is activated, it becomes possible to select the time after which the automatic answer on the iPhone is carried out. The time interval can vary from 3 to 60 seconds.

To turn off auto-answer, you need to go the same way and uncheck the box opposite the “Auto-answer to calls” submenu. For those who do not like the auto answer function, but do not want to miss important calls, an answering machine is suitable. Since turning on an answering machine on an iPhone is as easy as an auto answer. every user can cope with this task.

How to set up MMS on iPhone?

People who prefer to send photos via MMS from the iPhone sometimes look strange. why spend money on such messages if there is an iMessage function, social networks, Viber messengers and What’s App, which allow you to exchange data for free?

In fact, there are good reasons to keep sending MMS messages. Data exchange via social networks and instant messengers is possible only if the addressee also uses them. the sender may not know if the recipient of the image is, say, on. iMessage allows you to communicate only with other owners of iPhones, and besides, it also requires expenses: the operators have set a fee for activating the service. about 5 rubles. Therefore, it is important to know how to send MMS from iPhone even now. in the era of free communications.

Is it possible to configure MMS automatically?

You can request MMC settings in one of three ways:

    Call the operator’s hot line number to see if the MMS can be adjusted independently. Most likely, instead of consulting, the Call Center employee will offer the user to receive the settings by SMS. Contact the operator’s office in person and ask employees to set up the iPhone. In communication salons, services related to operator options (including setting up MMS) are provided free of charge. If employees start asking for money, ask them to provide a price list of paid services. this list will definitely not include multimedia messaging service settings. Send a free blank SMS or dial a short number. The list of numbers of the most famous operators is presented below:

As soon as the message with the settings arrives, you need to open it and click the “Save” button. After that, you can already check if the MMS is working.

Setting up MMS is meaningless if the service of the same name is not activated on the number.

The MMS service is part of the basic package of options and is automatically connected to all numbers, but it can be deleted due to some failure on the side of the operator or user intervention, which is “not understandable”. This means that before setting up, you should call the operator’s Support and clarify whether MMS is present on the number. You can also use your Personal Account.

How to set up MMS manually?

Why do users have to give up the automatic configuration of the MMC function? For two reasons.

Firstly, when you call a short number, you have to listen to ads and go through several steps in the menu, which is very tiring. Lack of specificity and inability to connect with a “live” specialist are the two main troubles of Russian support services.

Secondly, not all cellular providers provide the ability to automatically configure the iPhone. For example, in response to a Beeline data request from the iPhone 4 / 4S, the following message is received:

Turning on MMS on iPhone manually is not so difficult. you need to follow these instructions:

In the settings go to the “Cellular network” section.

Next, find the subsection “Cellular data network”.

Find the “ММС” block and enter the following data into its fields (unique for each operator):

How to connect to open networks?

Connecting to Wi-Fi is easy. To understand how to set up Wi-Fi on iPhone, just go to “Settings” and click on the “Wi-Fi” field.

Select a network from the open list. If required, enter the password, and then click on the blue inscription: “Connect.” at the top right of the screen. If the connection was successful, a checkmark will appear to the left of the network name, and a Wi-Fi icon will appear at the top of the screen.

If you often use a specific network, then there is no need to do all the above steps every time. Scroll down and turn on the “Request to connect” feature. The device will now automatically connect to a known Wi-Fi.

On versions of iOS 10.0 and higher, for example, on iPhone 6, 7, turning on Wi-Fi can be much easier. If the “Request to connect” function is enabled, then just swipe up and click on the antenna icon, this is how it looks:

How to connect to hidden Wi-Fi networks?

It is possible that the required connection is not displayed in the “Wi-Fi” tab. Most likely, the network is hidden. Most users rarely encounter such hotspots, so they don’t know how to connect hidden Wi-Fi on iPhone.

In the already described way, go to the “Wi-Fi” menu, click on the “Other” tab. You can find out the name of the network from its administrator, who will also tell you the type of security. If for some incredible reason it was not possible to find out the type of security, then the most reliable option would be “WPA2” for home networks, “WPA2 Corporate”. for public.

How to connect Wi-Fi on iPhone: complete instructions from the Hamster

IPhone owners often face Wi-Fi connectivity issues. This article explains how to turn on Wi-Fi on iPhone, the most common problems and how to solve them on different models.

The most common mistakes and problems

Find out how to solve wireless problems in the following

  • Connection problems on an already connected network;
  • The word Wi-Fi in the settings is written in gray and the slider does not move.

There are a number of measures to fix connection problems on Apple phones:

  • The most common way to solve the problem and turn on the wireless module on the iPhone is to turn Wi-Fi on / off.
  • If this does not help, then you should delete the network and reconnect to it. To do this, click on the “i” button to the right of the Wi-Fi name.
  • Then in the open menu, find the field “Forget this network” and click on it. Now the forgotten wireless connection will appear in the list of available.
  • The third option is to reboot the router (disable and enable). Sometimes a factory reset is needed. Usually the “Reset” button is responsible for this.
  • You can also reset your network settings. In this case, all Wi-Fi networks, Bluetooth users, VPN and APN settings will be forgotten. This requires:
  • go to “Basic” in the settings,
  • in the menu that opens, select “Reset network settings”,

If the connection is not restored, the problem is probably in the malfunction of parts or overlays in the work of the Internet provider, which you cannot fix.

To establish a Wi-Fi connection on an iPhone, if the word “Wi-Fi” is grayed out and the slider does not move, you need to:

  • Make a hard reboot of the system. It differs from the usual one in that it resets the temporary data, due to which the wireless module can work. To perform the procedure, you must simultaneously hold down the “Home” (central) button and the lock button. Here’s what you need to clamp on the example of the iPhone 5 / 5s / SE:
  • The second option will be to reset the network settings, the method has already been described earlier.
  • You can also upgrade your operating system. This decision is especially true for users of the sixth iPhone model. This is due to the fact that the new sixes for some reason often have an old version of iOS initially. To update the operating system, you must:
  • go to “Basic”,
  • in the page that opens, a search for updates will begin, and when one is found, click on the message that appears: “Request an update”.

At the time of writing, the newest version is iOS 12.2.

  • Owners of the iPhone 4s and 5 are the least fortunate, since the new iOS has not been supported on them for more than three years. But there is one more solution. So, to turn on Wi-Fi on iPhone 4s or 5, gently warm up the part of the phone just above the “apple” with a hairdryer for 30-50 seconds.

And even though in the video below the author heats up for 7-8 minutes, do not repeat this! The user manual says that prolonged heat treatment can lead to an explosion:

Wi-Fi troubleshooting on iPad works the same way as on iPhone. That’s all. If you have any questions, feel free to write in the comments! Until!

Tips on how to customize sound on iPhone

Sometimes the iPhone volume can “freeze” at the maximum or minimum level for no obvious reason for the average user. Or there are times when the sound level is maximum, and the output volume is still less than it should be and increase, turning on or off the sound on the iPhone becomes problematic. But, there is a solution to the problem with the sound in the phone.

Instructions on how to reset sound settings on iPhone.

So, you can always manually restart your iPhone to reset the volume.

Press and hold the “Sleep” button at the top of the device for four seconds.

Move the slider on the screen to the “Slide to Power Off” position. The screen will turn off or a standby icon will appear and the iPhone will turn off.

Press and hold the Sleep button again for four seconds. The Apple logo will appear on the screen upon boot.

Check the sound level by simply playing any track (melody).

Useful Tips for Setting Up iPhone Sound.

If the problem persists, try performing a General Reset. Before factory reset, back up your personal data!

If the problem is only about ring volume, try to fix it as follows: Settings Sounds Ring

Also, the iPhone will not ring loudly if a headset is connected to it. The sound will be from the headset, not from the phone speakers.

Chinese phone maker Realme, in an effort to beat the competition, has unveiled a 5G compatible mobile phone for around 146. Realme is going to use new 5G phones to increase its share in the mobile market.

52 comments:

I have such a problem with an iPhone. I put the phone on silent mode and my iPhone fell, and as I understood the silent mode adjustment button broke. And the phone was left in silent mode. I went into the iPhone settings, everything is fine there, but there is still no sound when you call. The speakers are all working.

Maybe in some confusing places in the iPhone 4 there are sound controls?

Help, please, I can’t walk without sound on my iPhone. Write an answer to me quickly.

A similar problem, I’m trying to figure out how to set the silent mode on the iPhone if the button is broken. Maybe there is some program to replace the functionality? Of course, it would be better to solve the problem, such as through the system settings of the iPhone.

Please advise if the following type of malfunction can be repaired. I have an iPhone without a sound, something broke during the hike, when someone calls me, I can’t talk.

My smartphone has sound, but when I shoot a video, it disappears somewhere (becomes very small) why does this happen? Tell me how to deal with sound fading?

I have such a problem with an iPhone, when I insert headphones into the iPhone, the sound becomes just awful, high voices are not heard at all, and when there are no headphones, the music plays perfectly, can you tell me what the iPhone has a problem and what to do? (I tried to connect headphones to a laptop, everything is fine with sound, maybe something happened to the input?)

Who is engaged in the repair of cell phones, please write the secret codes in the phones to restore the default settings of Apple iphone

There are no such codes! Regarding the silent mode. It is necessary to change the upper train. Speaker, speaker cable, may have come off when dropped. About the awful sound, I can suggest to put the usual headphones. If it does not help, do not fully insert the connector, if the sound is good, at least in one ear, then the top cable for replacement!

Is it possible to configure ios, or rather the accelerometer function, to increase the sound of the iphone headset speakers by shaking ?

If iPhone is muted after a couple of seconds after turning on the phone, what to do to fix the sound problem?

How to solve such problems with sound on the iPhone when you hear the calls, but when you don’t listen to music

Hello! As early as a month ago, I purchased an iPhone 4s VIP (Chinese). When typing text anywhere (notebook, SMS or browser) there are annoying clicks. So this is the actual question: Is it possible to remove these clicks? If so how?

READ  iPhone 6s stuck on an apple

How to get sound back on video in iPhone if you shot in silent mode?

We urgently need instructions on how to set up a multifunctional telephone set polygon 2327 pro

And why in whatsapp when you upload a video without sound to the iPhone?

Friends! I would be grateful if you could give a guide on another phone, for example, I need to help a girl figure out how to adjust the sound volume on a sonic XSperia mobile phone

Hello. there was such a problem with an iPhone. there is no music sound in the player, although when you call the phone, the music plays and sounds. the side buttons do not adjust the volume, and the headphones play music. tell me what to do.

What are the reasons on the iPhone 4, when you listen to music, it plays but inaudibly??

Why is there no sound on my iPhone when there is an incoming call? Although everything is correct in the settings.

Hello,
Could you describe in more detail which loop in the iPhone is responsible for the sound. Help a lot with leadership!

One speaker in the iPhone is working, and the other is not. So the speaker that works terribly starts to hiss, freeze, or sometimes does not turn on at all. Especially when I listen to music on my phone, either with headphones or without. All repeats. I don’t understand why one speaker doesn’t work in the iPhone. Sadly, the iPhone is only a month old 🙁

I also had a problematic situation when only one speaker works on the iPhone. Now I am looking for where it is cheaper to repair an iPhone.

I called the repair shop on iPhones. In consultation I was told that it is possible that the speaker does not work due to the fact that water got into the iPhone. But, you still need to take the phone to the iPhone master, in order to specifically find the reason why the speaker broke, then they will say how much the iPhone repair will cost.

I have not yet decided exactly where you can get your iPhone repaired. If I don’t find where a good iPhone warranty workshop is, then I’ll probably have to repair the iPhone at Gorbushka or Kievskaya.

People educate how to make the sound on the iPhone come from all speakers?!

Is there a separate function or application how to turn down the sound of an alarm on an iPhone?

I have such a problem on iPhone 4. On the ringtone, the sound also works on the notification, and when you enter the music or watch clips on YouTube, there is no sound, please help me how to turn on the sound

When you call on the iPhone 4s, the sound works, but when you dial and block the sound, there is no sound, in applications it is not there either, a strange thing happens 🙁 What’s wrong with him?

And I have a problem. here you connect headphones or speakers to the iPhone and completely when you turn on the sound it plays quieter, and if you make the sound a little quieter, then the songs are played normally. How to make it play loudly through headphones or through speakers?

Why, when you talk on the iPhone, you can’t hear it, but you make it louder, it shows headphones?

When I call, I can hear but I am not, but when I turn on the speaker I can hear what to do?

Good afternoon everyone, I have a small problem with the iPhone 5c, when someone calls me and immediately the volume becomes high. Probably you need a professional iPhone setup, but I don’t know how to adjust the ringtone sound for incoming calls. A step-by-step guide on how to make an incremental iPhone call from quiet to loud would help

What should I do if there is no sound on my phone with an incoming call? Although the sound is turned on in the settings!

A moment of attention. I would like to say thank you to the developers of this site, the author of the theme, the advice with the IPhone settings really helped me, for which I want to say a big thank you.
All the best!

Well, if the iPhone shoots video and plays without sound, how to set up the sound ?

Hello and thank you very much for prompting how easy it is to adjust the sound from a mobile phone! And then I suffered for a long time when I had some kind of quiet sound in the iPhone. 🙂

When you call on the iPhone 4, the sound works, but when you dial and lock, there is no sound, in applications it is also not there, and the video is played without sound. What’s happening to him?

Hi, I haven’t read all the tips yet on your site. tell me what you can do to make the melody play louder on the iPhone when you call and how to set the volume separately for the ringtone and alarm clock on the iPhone

Hello, on my iPhone, when I adjust the sound with the buttons, it does not show the dots themselves, and when I press the button, there is no sound, although everything is fine in the settings. With what it can be connected?

Hello! My problem is that there is almost no audibility during incoming and outgoing calls. The volume was “raised” for the whole, but the problem remained. Please tell me what the problem is?

Hi there! How to restore sound on a video on your phone if you shot it in silent mode?

Guys, we urgently need a Russian-language and step-by-step guide on how to set up the functionality of the phone so that the incoming letter can be seen on the locked iphone screen and the sound alert works

I have such a problem, tell me when I add sound to the iPhone 5 in the headphones, it is not fully added, it says that the sound is added to the maxem, but you can still add but not add ?? Help?

And I lost the sound on the browser (for example, when I want to hear translations of words in English). How to fix and restore sound iPhone browser?

Hello, I have a current problem. The sound of the keys and blocking has decreased, I go into the settings, everything is normal, tell me what to do

Teach you how to turn on sound on iPhone remotely. you are welcome!

Thank you, otherwise my iPhone 4s movie loses without sound for some reason.

guys help please, my sound turns off when I make a video call on the iPhone, if I turn off the video sound appears, but when the video is turned on there is no sound, how can anyone set up? Thanks in advance)))

Thanks for the instruction on how to reset iPhone volume glitch!

I rebooted the smartphone manually and really managed to get rid of the problems with the sound, the stuck iPhone volume.

Please help me in the headphones I hear the interlocutor very quietly, but otherwise everything is clear, everything works fine. Don’t know what it is?

If the problem has appeared recently, then perhaps the case lies around the phone system. Well, as one of the intended options. After all, most people don’t think of it that way, iPhone. it is a computer that is in your hand or in your. And while it certainly doesn’t look like a home computer or laptop, as it does similar devices, sometimes you need to reboot or even reset all iPhone settings to fix problems. Before any action, as advised above, you need to back up your phone data!

In general, a factory reset means a lot of different things. This can be a basic restart, a more complete reset, or sometimes even deleting all content from the iPhone so that it works like a freshly purchased one and / or restores from a backup.

Help me please. Son gave iPhone SE? I tried to figure it out on my own, accidentally connected, apparently, the Touch Adaptation function with sound. Now he just says something quickly when he touches it, but I can’t turn it off or go to Settings to disable this function. What to do?

This is a very useful tip, thanks! In my cases, even if the volume was turned on at full volume, the sound came out lower than I know what the iPhone is capable of. When something happened, I tried to reset the iPhone volume like this. He turned off the phone completely, and then turned it back on. After the phone has rebooted. the rebooted iPhone returned to its normal volume settings. Somehow it was.

I wonder who else besides me can hear distorted sound from the iPhone 8 speaker? Share a secret or what do you think is the best way to fix such sound problems? thank!

I am doing an iPhone reset by rebooting and resetting to factory settings. For me, holding the buttons until the screen on the iPhone goes black and the Apple logo reappears is as easy as restarting the computer after a crash. As they say, one reset will solve a lot of troubles! 🙂


By clicking on the icon, share information on the social network:

sending MMS from iPhone 4/5

This method involves sending MMS from iPhone directly from the gallery.

  • Go to the “Photos” folder;
  • Click “Select” and mark the images / videos that we plan to send;
  • Click on the icon below, in the left corner and select “Message”;
  • We select the addressee, add the text and click “Send”. The images are now attached to the message and will be delivered to the recipient along with it.

Important note: Some mobile operators set a limit on the weight of the sent MMS.ok (within 1 Mb.). therefore sometimes images over 1-2 MB are not sent the first time. In such cases, after sending is interrupted, just try again. If an error notification appears when sending a photo by e-mail. choose not the actual, but a smaller size.

sending MMS from iPhone 4/5

DELETE

  • On the desktop of the device, open the “Messages” folder;
  • In the upper right corner of the screen, click on the icon with the image of a pencil / pen and a sheet of paper;
  • In the menu for creating a new SMS, after selecting the recipient, click on the icon with the image of the camera;
  • Select the desired photo / video from the “Media Library”;
  • Or create a new one in real time by clicking on “Take a photo or video”;
  • Add text, then send MMS by selecting “Send”.

How to set up MMS on iPhone 4/5

DELETE

  • Go to “Settings”;
  • Click on the “Cellular” menu;
  • On the page that opens, move the “Cellular Data” slider to the right (turn it on);
  • We go down to the line “Cellular data network” and enter this menu;

On the page that opens, we check the correctness of the entered data. If these fields are not filled in, we enter it ourselves (we perform the same manipulations if, with the current data, MMS are not sent or received).

The data for filling can be easily found on the official website of your mobile operator. In addition, you can simply enter a request for the required information in the search engines. But, usually, the iPhone independently determines the mobile operator and automatically fills in the necessary fields in the settings for the Internet and MMS.

An example of setting up MMS on iPhone 5S for the mobile operator MTS

APN: internet.mts.ru
Username: mts
Password:.
MMSC: http: // mmsc
MMS proxy: 192.168. 192.10: 8080
Maximum size: 512000
URL: MMS UAProf

This was the most difficult part of the process of operating MMS on the iPhone. Now let’s talk directly about how to enable MMS and how you can send MMS messages from iPhone 4/5. And this can be done in three different ways.

Manage MMS on iPhone

Everyone knows that the iOS operating system has a very simple, accessible and user-friendly interface. As a rule, even a schoolboy can figure it out. But among new users, some still sometimes have difficulties with how to deal with a particular program or opportunity on a device, the operation of which, subsequently, seems to them absolutely elementary.

The category of such features also includes such a convenient function as connecting and sending MMS from an iPhone. The main frightening difficulty for novice users is the absence of the usual “Send MMS” function, which is known to most users of ordinary mobile phones. This can be very confusing for a newbie when sending a multimedia message after buying a new iPhone.

Let’s try to figure out in this article how to make the process of sending MMS from iPhone fast and convenient.

Important Note: To use this feature successfully, you need to get the correct settings from your carrier and set them up on your iPhone.

sending MMS from iPhone 4/5

There is another method, which, however, is very rarely used. Sending MMS directly from the “Camera”. Take a photo and click in the lower left corner on the resulting photo. The photo will expand to full screen, and an arrow will appear at the bottom, by clicking on which, you can immediately send the finished picture by MMS using the method described above.

Thus, dear reader, now iPhone 4/5 can delight you with the ability to send MMS.

Do not forget to read the comments, there is also a lot of useful information. If there is no answer to your question, and there is an answer to later comments, then the answer to your question is contained in the article, respect someone else’s time.