How to enable Internet Sharing on Samsung phone

Table of Contents

How to Share Your Smartphone’s Internet Connection Samsung Galaxy S6 Basic Tutorials

Configuration via SMS

  • We open the message through the “Shutter” menu. Or you can find it in the SMS section of the main menu.
  • Opening the configuration message.
  • You may be asked to enter a 4-digit PIN-code, try to enter one of the values: 1234, 0000, 1111, 2222, 3333, 4444. If the code does not work, then call the operator again and ask what PIN they set.
  • After that, you will see a message that the installation is complete. Open the same “Shutter” menu again and turn on the mobile Internet.
  • But it’s too early to rejoice, it’s worth restarting your smartphone. To do this, find the side button and hold it down for a few seconds. After that select the option “Restart”.

Manual setting

  • Find and click on the gear icon.
  • Go to the section of all wireless communications “Connections”. Not all firmwares have this item, if you cannot find it, then skip this step and move on to the next.
  • Next, you need to find the section that is related to “Mobile networks”. It may be hidden, so you will need to click on the “” button.
  • We go to the subsection “Access points”.
  • Now you need to enter the settings manually depending on your carrier.

NOTE! You can see the settings below. Everything that is not specified, we leave with the default values ​​and do not fill.

ATTENTION! A dash (-) or dash symbol means that you do not need to enter anything in this line and just leave the default value.

Operator Tele 2 Beeline MTS Megaphone Yota
Name tele 2 internet beeline internet mts megafon yota
Access point tele2.ru internet.beeline.ru mts internet yota
Username beeline mts gdata
Password mts gdata
Authentication type POP POP (PAP or CHAP)
APN type default, supl default default default default, supl
MCC 257 255 250
MNC 02 02 eleven
  • Click on the three dots in the upper right corner of the screen and select the “Save” button from the drop-down menu.
  • Now, just like at the very beginning, you need to turn on the Internet menu and be sure to restart the smartphone. we hold down the main side button and restart the system.

How to turn on the Internet on Samsung: connection, settings and Wi-Fi

Hello everyone! Today I will show you how to enable and configure mobile internet on your Samsung phone. To do this, you must have a SIM card inserted in your smartphone and pay for any of the tariffs that have Internet access. After that, in 99% of cases, you do not need to configure anything, just swipe your finger from top to bottom, open the “Shutter” menu, click on the item “Mobile data” (“Data transfer”).

To test the connection, go to the Samsung Internet browser and enter any query in the search bar. If after this there is no Internet, we will try to configure it manually. Also, do not forget that you can access the Internet using Wi-Fi. I will talk about this at the very end of this article.

Wi-Fi connection

If you want to organize a Wi-Fi network at home, in the country or in an apartment, then you need to take a few steps. they are all described in detail here. If you are connecting to an existing Wi-Fi network, then you need to do the following:

  • Open the “Menu”, go to “Settings” and go to the wireless network section. Next, enable this module.
  • In some firmwares, this subsection is located in the “Connections”.
  • Once the module is active, you will see all nearby wireless networks, select any and connect. When connecting, you will need to enter a password.
  • You do not need to enter a password all the time, and it is now easier to turn on Wi-Fi through the same “Shutter” menu. We just turn on the module, and the smartphone will automatically connect to the network.

Manual Internet setup in Samsung

To do this, go to “Settings. Wireless networks. Mobile network. Access points (APN)”, click the plus sign and “New access point”. Depending on the operator, we use the following parameters:

  • Access point (APN): internet.mts.ru
  • Username (Login): mts
  • Password: mts
  • Access point (APN): internet.beeline.ru
  • Username (Login): beeline
  • Password: beeline
  • Access point (APN): internet.tele2.ru
  • Username (Login): no need to fill
  • Password: no need to fill

As soon as you entered the settings, check if the data transfer is enabled in the network settings. If there is no connection, try restarting the device.

You can also try to send a request for auto Internet setup to the operator.

Here is such a short instruction, which will take you just a couple of minutes to read, and in the end you will regain the opportunity to use the Internet on your Samsung phone, whenever and wherever. Success!

If it was not possible to set up the Internet on Android, write about it in the comments.

how to set up Internet on Samsung phone

One of the most common functions used on smartphones is Internet access. But a network connection is needed not only for web browsing. Almost all the work of a modern device is not available without a network connection. This makes it autonomous with respect to the computer, but useless without the Internet. Almost all applications require a connection, a lot of the necessary data is stored in the cloud, which is not available without a network. Many users, even messages and calls that were traditionally available via cellular communication, prefer their Internet counterparts, in applications Viber, Skype and the like.

Usually, on smartphones, the connection to the network occurs automatically, or in one step, when the network is available. But there are situations when you can’t connect right away. We will go over the basic ways to connect to the network. If the connection to the network does not occur due to mechanical damage to the phone, contact the Samsung service center for professional help.

SIM card selection

The first step is to choose a SIM card that will distribute the Internet (of course, this applies only to those smartphones in which two SIM cards are installed). To do this, open the smartphone settings and in the “Connections” section click on the “SIM-card manager”.

We are looking for “Mobile data” and select there the card that is necessary for working in the network.

If one SIM card is installed in the smartphone, it will be installed by default as the main one.

How to turn on the Internet on a Samsung Galaxy phone

This instruction concerns the setup and subsequent connection of the smartphone to the global network using the mobile Internet (via the SIM card of your operator). If you need to connect to a router, read the material:

Access point setting

This step is optional and you should resort to setting up the access point only if the Internet did not work after activating the basic settings (from step).

To do this, open the section “Connections” and go to the item “Mobile networks”.

If necessary, activate the switch “Data in roaming” (which allows you to surf the Internet abroad, as well as if you use a virtual mobile operator using the coverage of Partner operators).

After that, go to the “Access points” section and select the required access point (if it exists) or create a new one.

You can find out what settings need to be entered into the new access point from your mobile operator by calling the Call Center.

It should be noted that often the SIM-cards are already configured for the correct access point and nothing needs to be changed.

Mobile internet connection

The final step is a direct connection to the mobile internet.

To do this, lower the notification curtain and activate the “Mobile data” switch in the quick access panel. If everything is configured correctly, the Internet should work without any problems.

Some reasons why the Internet does not work on Samsung:

  • there are not enough funds on the SIM card account to be charged for mobile traffic;
  • out of batch megabytes;
  • poor reception area of ​​the mobile network signal;
  • the required SIM card has not been selected (Step 1);
  • the access point is incorrectly configured (Step 2).

Without a smartphone. nowhere. But what kind of smartphone is this without a working mobile Internet? Today we will analyze how to properly set up the Internet on a Samsung phone on Android.

READ  How to connect your TV to your home internet

First, let’s try to enable the settings automatically. We go to “Settings. wireless networks. mobile network. telecom operators” and wait for the search to end. If the operator is determined, click “Select automatically”.

If the automation did not work, then we prescribe the Internet settings manually.

Ways to connect to the Internet on a Samsung phone

At the moment, there are three network modes: 2G, 3G, 4G. 2G has the slowest speed and low consumption, 3G has average performance, and 4G, as everyone knows, is the fastest. On each mobile device, the ability to connect to one of the modes depends on the characteristics of the phone. That is, if your phone supports 2G, you will not be able to connect to the other two types of networks. 4G enabled mobile device connect to the other two. You can select the network mode in the following way: go to “Settings”, select the “Mobile networks” section, in the window that opens, select the mode you need.

There are two main ways to connect to the network on smartphones. This is a cellular connection and a Wi-Fi network. The first option is available anywhere in the world where there is network coverage, but it is more expensive and, sometimes, inferior in connection speed. Wi-Fi is a more local option, although in modern cities almost all public places have their own Wi-Fi. Also, this option is faster and more reliable.

To connect to the Internet using a cellular connection, you need to contact your mobile operator. If you have a SIM card in your phone and your operator provides Internet connection services, then you need to activate these services in order to get the access point settings. As a rule, when buying a SIM card, these settings come automatically. But, if this did not happen, contact the call center and make a request. Open the received service message, select the section “Application: Internet” and click “Install”.

To connect your phone to a Wi-Fi network, you need to follow a different set of steps. You need to go to the settings of your phone, and turn on the Wi-Fi device. When the adapter is activated, you will see a list of available networks. Next, you need to select the connection you want. Networks can be password protected. If the network to which you are connecting is exactly the same, then the next step will be to enter the password. After that, the smartphone will be connected to the network and you can use the Internet.

It is worth noting that with active connections to both the cellular Internet and the Wi-Fi network, by default, the smartphone will use exactly the Wi-Fi connection.

How to turn your phone into a Wi-Fi hotspot

While it may seem like Wi-Fi is available everywhere, sooner or later you will find yourself where there is no Wi-Fi. You still need to go online. What do you do?

Well, you can have a solution right in your : a mobile phone. Many cell phones allow you to turn your Cell Internet connection into a Wi-Fi connection for other devices.

This is called creating a “hotspot.” “Your cell phone will appear as a Wi-Fi network that other users can connect to.

Connecting your tablet or computer to this access point is called a “modem”.

When to use your phone as a hotspot

Using your phone as a Wi-Fi hotspot can help if you want to share your phone’s internet connection with a computer, tablet, or other user.

Or there may be a Wi-Fi network available, but you’re not sure if the connection is secure. Using your phone as a hotspot will avoid unsecured Wi-Fi networks.

Driving with your family can be more fun when you connect your tablet to the Internet through your phone’s hotspot. You can avoid paying for your tablet’s cellular data plan by linking to it.

Maybe your home or office has a power outage and you need to use the Internet. Connect your laptop or tablet to a Wi-Fi hotspot on your phone.

How to turn your phone into a Wi-Fi hotspot

To turn your iPhone into a hotspot, go to Settings, then Personal Hotspot.

IPhone Settings Hotspot

The next screen will allow you to set a password. Don’t skip this step (see below). The name of your network. this is the name you gave your phone.

IPhone Settings Hotspot Network

Turn on the switch and follow the instructions that appear.

An Android phone can be used as a hotspot if it is running Android 2.2 or later, your phone and carrier must also enable modem.

To turn your Android phone into a hotspot, go to Settings, then Mobile Hotspot & Tethering.

Android hotspot

Click on “Mobile hotspot” to enable it, set your network name and password.

Connecting the device to a Wi-Fi hotspot

You connect your computer or tablet to your phone’s Wi-Fi hotspot just like any other Wi-Fi network. Select your phone’s network name, enter a password, and connect.

Some phones also allow cable and / or Bluetooth pairing.

What you need to know about using your phone as a hotspot

Before you start using your phone as a hotspot, there are a few things you need to know.

Tethering uses the highlighting of your cell phone data plan.

When your phone is the hotspot, it transmits your monthly data. dedicated number. other devices. Use Tether only when you need it, so you can avoid running out of data before the end of the month.

You also don’t want your phone to turn into an open Wi-Fi network that’s free for everyone. Your data volume can be used in minutes! For this reason, you want to choose a strong password and only share it with people you trust.

consume a lot of power, so your phone’s battery can drain quickly. If you intend to use the modem for a while, be sure to connect your phone to charge while the hotspot is on.

Turn off the hotspot when you’re done using it.

You will save battery power and data if you turn off the hotspot as soon as you finish the modem.

Cellular signal is required to use the hotspot.

If you are in a place where there is no cellular phone signal, your phone’s hotspot will not be able to connect the device to the Internet.

Check your hotspot before using it.

Make sure your phone and carrier allow connection to the hotspot.

Multiple devices may be connected to your access point.

And remember, the more devices are connected to your hotspot, the faster the data extraction will take place.

Caroline Nicander Mohr wrote this report for VOA Learning English. Katie Weaver was the editor.

Have you ever used your phone as a hotspot? Does your phone have this capability? When would you use an access point? Share your thoughts in the comment section below or on our page at

Samsung phone as a modem or Wi-Fi adapter. video instruction

Typically, sharing over Wi-Fi or USB from Samsung phones usually works without any problems. Bluetooth connectivity is not always smooth, but I hope if you need it, it will work out.

Sharing the Internet from a smartphone to a computer via USB

Unlike the previous method, by connecting your Samsung phone to a computer or laptop via USB, you can distribute not only the mobile Internet, but also access to the network obtained via Wi-Fi, using the smartphone as a Wi-Fi adapter. The steps will be as follows:

  • Connect your phone with USB cable to PC or laptop.
  • Once connected, go to the notification area on your phone and tap on the USB connection notification.
  • Select “USB tethering”.
  • Windows or another OS will set up a new device (your phone as a modem).
  • A new Ethernet connection will appear in the list of connections on your computer (WinR. ncpa.cpl). If it is disabled, right-click on it and select “Enable”.
  • If the network still remains in the “Disconnected” state, on the phone go to Settings. Connections. Mobile hotspot and modem, turn off and then turn on the USB tethering item, the network will become active, and the Internet is available.

II.Enter Internet Settings

The options below may be slightly different depending on the device, but look for similar options in your device’s settings and you will definitely find them.

On your phone, go to Settings by pulling down the notification bar and clicking the gear in the upper right corner.

Click on “Other networks” (or a similar option under “Connections / networks / etc.”).

Click on “Mobile networks” (or similar option if it exists).

Click on the plus sign or the Add button.

Enter the information from our Internet / MMS section that you found earlier.

Click the menu button and click Save.

Click the empty circle next to the new APN you just created to select it.

After that the internet device should be up and running. Try going to the website to check it out and then try sending a picture message to check it out. Enjoy!

words in this story

cellular. addendum referring to a system that uses radio waves instead of wires for data and telephone signals.

access point. n. a place that provides Internet connectivity for devices such as computers and tablets

modem. v. connecting one device to another, usually to share an internet connection

skip. v. do not (something normal or expected)

shutdown. n. the period of time when there is no electricity in the building or on the site

plot. n. the amount of something given to someone to use or have

The second way is to enable or disable mobile internet on any Android phone

The second way to enable or disable mobile Internet, for example, in honor phones, Huawei 10, Samsung a50, Samsung a6 and so on is a little longer, but also more effective, since you can make additional settings in it.

To do this, go to “Settings” and go to “Connection” and select “SIM card manager”.

Now we click on the item “Mobile data” and select the SIM card on which we want to get the Internet.

That, in fact, is all. If the service on the SIM card is connected, then the mobile Internet should then be connected.

As I warned you above, some parameters may have a different name as it depends on the Android version. I took pictures from android 7.

READ  How to update Android on a Samsung tablet

3 ways to enable and disable mobile internet on any Android phone

On an Android phone Samsung Galaxy, Honor, Huawei, ASUS Zenfon, BQ, Xiaomi, Sony Xperia, but KIA Lumiya, Meizu, Lenovo, ZTE, Alcatel, Fly can be turned on and off almost instantly as a mobile Internet

So quickly you can turn on and off the distribution of mobile Internet to other devices. to a smartphone, tablet or laptop.

It does not even depend on the service provider. mts, kyivstar, megaphone, beeline, tele2, motive, phoenix or any other, only, of course, first you need to connect such a service with the operator.

Below I will show 3 ways, only depending on the version of the android, the parameters in your smartphone or tablet may not completely coincide with those in the pictures.

The first method is to instantly enable or disable mobile internet on any Android phone.

On any modern Android phone, such as Honor 10, sony, Xiaomi, asus zenfone, Samsung a10, Samsung a3, huawei, Meizu m6, huawei y6, you can turn on or off the mobile Internet in 2-3 seconds.

To do this, you only need to move the shutter twice, hooking the top of the screen with your finger (on some versions, you need to move from right to left a second time).

Then you will see an icon in the form of two arrows. One press. turn on the mobile Internet, the second. turn off.

In other words, if the arrows are displayed in blue, then the mobile Internet is on, if in gray, it is off. All this is shown in the photo at the beginning of this section.

The second way is to enable or disable mobile tethering on any Android phone

You can also turn on the distribution almost instantly. To do this, as indicated in the first section, move the curtain from top to bottom twice (in some versions, the second time you need to move from left to right) and click on the icon “Mob. point access “.

Gray icon. disable distribution blue. enable. In the picture above, the distribution of mobile Internet is disabled.

I will share the secret of how your smartphone can save your life. Did you know that your phone has a feature that could save your life? Now I will explain to you how to activate it and how to use it.

Each of us would like to avoid accidents, but statistics clearly show that they can meet each of us.

It is worth knowing that even in the most tragic moments, modern technology can allow us to immediately seek help and thereby save our lives.

Most of us carry smartphones in our s, and it is definitely worth activating the alarm message function in them.

If you suddenly find yourself in a serious threat to life and health and cannot even call the emergency number. you can inform 4 people close to you about your situation by sending an alarm message.

If you enable this feature on your phone, you will need to quickly press the phone‘s power button three times and they will be sent a message with your location, as well as a photo taken with the front and rear cameras.

How to enable SOS message function? You can use it on Android phones. To enable it, you need to go to the “Settings” of the phone, open the “Additional settings” section and find the “emergency messages” tab.

After entering the alarm messages menu, you must enter the “Main contacts management” option and enter the number of people to whom we would like to address our emergency message.

Then you just have to turn on the “send help messages” feature and keep your fists so you never use them. Success.

How to make a Wi-Fi hotspot from Samsung Galaxy. Samsung Galaxy how to share WI-FI. How to change the password and WI-FI name on the phone.

Smartphones Samsung Galaxy is able to distribute the Internet simultaneously to several devices, phone, computer, laptop, tablet and others. The more devices connected to your smartphone, the lower the speed on other devices, as the speed is shared among all devices. You can connect your laptop or computer to the internet from your phone wirelessly via the WI-FI hotspot on your phone.

Now let’s see how to make a WI-FI access point from Samsung Galaxy and distribute the Internet to another phone or other devices.
1) Open “Settings” on Samsung Galaxy and select “Modem and access point”. See the screenshot below, in it I highlighted this item in the settings.

2) Next, in a new window, we find the item “Mobile hotspot”. Look at the picture below.

3) Then we see the menu as in the picture below, in it I also highlighted the place where you need to turn on the Wi-Fi hotspot on the phone.

You can also set up a Wi-Fi hotspot on Samsung Galaxy. To do this, click on three dots at the top of the screen on the right side, after which a menu should appear as in the screenshot attached below. Also in the screenshot you can see how the included WI-FI distributor should look like. It changed color from gray to light greenish.

In the menu that opens, we can configure the name and password of the WI-FI hotspot in Android. In the picture I have highlighted these points. It is better not to touch anything besides the name and passwords. In the picture, the name of Wi-Fi is “AndroidAP”, if you do not change the search for an access point on the Samsung Galaxy, then you need to look for Wi-Fi under this name, if changed, then the one you specified. After you have found WI-FI to access it, enter the password you specified. If you want to see the password, turn on “Show password” in the settings.

Also, on some Samsung androids, you can turn on the wai wai access point through the quick menu. To do this, you need to pull the screen from top to bottom and you will see a panel with icons for quick access to various functions. Next, by sliding the panel to the left or right, you need to find the access point icon and activate it by touching it. Below in the picture I have highlighted this icon, you can also go directly to the settings of the access point and also change the password and name of the WI-FI distributor.

If you connected via Wi-Fi to Android, but there is no Internet, check if the Internet is activated on the Samsung Galaxy to which you connected via the WI-FI hotspot, if the Internet is not turned on, then there will be no Internet on the connected devices.

Sharing the Internet from a smartphone to a computer via USB

Unlike the previous method, by connecting your Samsung phone to a computer or laptop via USB, you can distribute not only the mobile Internet, but also access to the network obtained via Wi-Fi, using the smartphone as a Wi-Fi adapter. The steps will be as follows:

  • Connect your phone with USB cable to PC or laptop.
  • Once connected, go to the notification area on your phone and tap on the USB connection notification.
  • Select “USB tethering”.
  • Windows or another OS will set up a new device (your phone as a modem).
  • A new Ethernet connection will appear in the list of connections on your computer (WinR. ncpa.cpl). If it is disabled, right-click on it and select “Enable“.
  • If the network still remains in the “Disconnected” state, on the phone go to Settings. Connections. Mobile hotspot and modem, turn off and then turn on the USB tethering item, the network will become active, and the Internet is available.

Sharing the Internet via Bluetooth

And the last method: using a bluetooth connection. Its main disadvantage is the relatively low connection speed, as well as the instability of work (and sometimes the impossibility of connecting) for many users. The procedure will be as follows:

  • On your Samsung phone, go to Settings. Connections. Mobile Hotspot & Tethering.
  • Turn on Bluetooth tethering.
  • Connect via Bluetooth from another device, and if we talk about Windows 10, simple pairing of the device through “Settings”. “Devices” may not work. After it, you need to right-click on the Bluetooth icon on your computer, select “Join a personal network” (or go to Control Panel. Devices), right-click on your smartphone in the list of devices and select “Connect via”. “Access Point” or “Direct Connection”. Your phone may ask you if you want to connect in Bluetooth tethering mode.
  • In the list of available connections (which can be opened via WinR. ncpa.cpl), you should see an active “Bluetooth Network Connection”.

How to share Internet from Samsung phone via Wi-FI, USB and Bluetooth

Almost all Android phones have the ability to distribute the Internet via Wi-Fi, Bluetooth or USB, and Samsung smartphones are no exception. This instruction details how to distribute the Internet from Samsung Galaxy to a computer, laptop or other phone in all available ways. The examples use a Galaxy Note with Android 10, but the other current models will be the same.

If you are interested in the same for devices with pure Android without features of the One UI interface, about this in a separate guide How to share the Internet via Wi-Fi / Bluetooth / USB on Android.

How to share Internet from Samsung Galaxy over Wi-Fi

The easiest way is to distribute the Internet from a phone via Wi-Fi to a computer, laptop, tablet or other smartphone. At the same time, keep in mind that only mobile Internet (received from a telecom operator) can be distributed via Wi-Fi, the process itself is as follows:

  • On your Samsung smartphone, go to Settings. Connections. Mobile Hotspot & Tethering.
  • At the top, turn on the item “Mobile hotspot”. If you are told that you need to turn off Wi-Fi for this, agree (since we cannot share the existing Wi-Fi connection in this way, which I mentioned above).
  • In order to change the network name, find out or change the password, click on the item “Mobile hotspot” and specify the necessary data instead of the standard.
  • After that, you can connect to the created wireless network from any other devices and use your phone’s mobile Internet from them.
READ  How to change the battery on Samsung a5

A few nuances that may be important in the context of distributing the Internet over Wi-Fi from a phone:

  • Do not forget that for the Internet to work, the mobile Internet must be connected and active.
  • Some telecom operators on some tariffs block the ability to distribute mobile Internet from the phone to other devices.
  • If you need to quickly connect another phone to the Internet, in the settings of the mobile hotspot on Samsung, you can click on the QR code icon in the upper right and scan the generated code with another smartphone.
  • If your tariff has limited traffic, keep in mind that by connecting your PC or laptop to the created access point, you can quickly use it up (for example, if OS updates start downloading).

Samsung phone as a modem or Wi-Fi adapter. video instruction

Typically, sharing over Wi-Fi or USB from Samsung phones usually works without any problems. Bluetooth connectivity is not always smooth, but I hope if you need it, it will work out.

Distribution of new, sometimes interesting and useful materials from the remontka.pro website. No ads and free computer help for subscribers from the author. Other subscription methods (VK, Odnoklassniki, Telegram., YouTube, Yandex.Dzen)

Everything is fine, but how to connect to the Internet of the computer? Didn’t automatically connect.

How to distribute mobile Internet from a smartphone via Wi-Fi? Configuring an access point (Wi-Fi router) on a phone with Android OS

I have already promised several times to write detailed instructions in which to tell and show, using a real example, setting up an access point (Wi-Fi router). on phones that run on the Android operating system. If I’m not mistaken, then on all Android smartphones, it is possible to distribute mobile Internet via Wi-Fi to other devices.

If your phone has pure Android installed, then most likely this function is called “Hotspot”. On HTC smartphones (I have one). this function is called “Mobile Wi-Fi Router”.

What this trick is, and how it works, I think you already know. If not, now I will tell you in a nutshell. You can turn your Android phone into an access point, a kind of mobile Wi-Fi router. You can distribute the Internet from your smartphone to other devices, for example, a TV, tablet, laptops, other smartphones, etc.

That is, the smartphone will take the Internet provided by your provider and distribute it over Wi-Fi. What is it, I think, figured out. A very useful feature, given that mobile Internet is not very expensive now, and operators provide quite normal tariffs.

The phone itself on Android, configured and working Internet (if sites on your phone open in the browser, then everything is ok). well, the devices that you will connect to your smartphone. I, on HTC, can connect a maximum of 5 devices at the same time.

I will show on the example of HTC One V. I will connect the ASUS MeMO Pad FHD 10 tablet, and a laptop. If you have another phone, for example, Samsung, LG, Lenovo, etc., then it’s okay, the setup process will be practically the same.

Setting up Wi-Fi “Hotspot” distribution on Android

First of all, turn on your mobile internet. What would appear at the top, on the notification bar, the corresponding icon.

Next, go to the settings, and in the Wireless Connections and Networks section, click on ““.

There we select “Wi-Fi router and USB modem” (it can also be “Connect an access point”). In the next window, click on “Router settings” (or Change Wi-Fi access point “).

Next, we need to set the parameters for our mobile router.

  • Router Name (SSID), this is the name of our Wi-Fi. We indicate any name in English letters.
  • Security, keep WPA2.
  • Password. This password will be used to connect to your network. Minimum 8 characters. English letters and numbers.

We indicate all these parameters, and to start the Wi-Fi router, put a tick next to “Mobile Wi-Fi router” (Wi-Fi access point). Tips for connecting devices will appear, just click Ok. On the notification bar, an icon should appear that the router is running.

Everything, you can connect our devices to Wi-Fi.

Connecting devices to the created hotspot on an Android smartphone

Turn on Wi-Fi on your tablet (for example). we go to the list of available networks, see there the network we created on the phone, and select it. Enter the password (I have it 11111111). and click Connect.

Also, select our network, and enter the password from the network.

Connection established, network connected and with internet access.

You can see on your phone how many devices are already connected. Just click on the “User Management” button. True, you will not see some useful and interesting information there.

To disconnect a mobile router, just uncheck the corresponding item.

Afterword

As you can see, everything is very simple and convenient. This scheme works quite stably (if the network is good). Do not forget that a running mobile router drains the battery decently, which is not a strong point of Android OS devices anyway.

And so, everything works and you can use it. If you have any questions, ask them in the comments, we will sort it out together. Good luck!

SETUP REPAIR AND USE Samsung TECHNOLOGY

Samsung is one of the leaders in the sale of household appliances and mobile devices in Russia. In the last year alone, more than 1,000,000 units of various products from the Korean giant have been sold. Our site will help users in choosing, using and setting up Samsung equipment.

Choose your Samsung device following our tips and tests

Communicate, ask questions, get high-quality tech. support from site experts

How to set up a Samsung Galaxy smartphone to Wi-Fi router mode

In order to distribute Wi-Fi from a Samsung Galaxy smartphone or tablet, you need to follow a series of simple steps. The first thing that needs to be done is to connect to the mobile Internet, it is from it that the network that we are going to distribute comes from. For a stable speed, it is recommended to connect to 3G or 4G, as simple mobile Internet is quite slow.

This is done differently in different firmwares and smartphone models, but in each case, you first need to go to Settings, and then click on the menu item. Further, depending on the firmware version, there may be different items: in one of the OS versions the item is called “Modem mode”, in others it is “WLAN access point” or “Personal access point”. One way or another, the same function is hidden under this item, it is this function that allows you to make the distribution of the Internet work.

How to set up an access point will be discussed in more detail later.

How to share internet via Wi-Fi on Samsung Galaxy. step by step guide

There are situations when the Internet is urgently needed, and it is, for example, only on a friend’s smartphone, since any modern mobile device from Samsung Galaxy has a modem function. This is a pretty useful “trick” that helps to distribute the Internet to nearby devices, such as other smartphones or even a laptop. over, even a dozen devices can be connected at the same time, the main thing is that the Internet speed is enough for everyone. This function is quite simple to use. You can learn more about how to share Wi-Fi on Samsung Galaxy in the instructions below.

Using settings

The modem function works on almost any smartphones, this applies even to fairly old models. So, even on the Samsung Galaxy A1000, Wi-Fi distribution is carried out without the slightest problems and interruptions.

To securely enable hotspots on your Samsung Galaxy, you first need to set a password and change other settings. If this is not done, then anyone can connect, which means that this user will be able to waste your precious traffic or, even worse, try to enter the device and steal any data.

Setting a password and other parameters

You can set a password on any smartphones of the company, but let’s look at how this is done on the Samsung Galaxy S860 and its younger model S850.

After setting up the access point, the choice of the distribution method pops up, we need “Use a WLAN connection”. The next menu will open, there you need to click on “Configure the main point of the wireless network”. Next, a window will appear in which you need to enter the desired name of the access point, its password and protection method, including WPA2 PSK and WPA PSK. When all the data has been entered, you need to click on the “Save” button.

After these simple manipulations, the Wi-Fi access point is ready and, importantly, protected from third-party interference. Now you can freely distribute the Internet to everyone to whom you provide your password.

However, this is not the only way to distribute the Internet. You can do this using third-party programs.

Using third-party programs

We’ve covered a basic way of distributing Wi-Fi on a phone, but using third-party apps can make things go faster. Some programs even increase the reliability of the connection. This will be useful for the distributor from the Samsung Galaxy phone, since no one can hack it, even if they try.

Osmino is one of the most popular hotspot applications. This application allows just a couple of clicks to create a secure point from which you can distribute Wi-Fi.

Samsung Galaxy S7: How to Share Internet Connection Via Bluetooth Tethering

You no longer need to think about how to share Internet from Samsung Galaxy. All that is required is to download a small application, install it and run it. After that, the access point settings will open. There you can enter your nickname and the desired password, after that you need to click the “Distribute” button. These actions will launch the Internet Sharing from your smartphone.

The app is quite lightweight and will run on any company device, including the Samsung Galaxy A5000.