How to connect wi-fi to a Samsung TV

Connection speed control

Data rate drops can be caused by:

  • insufficient functional potential of the router (you will need to replace the router);
  • heavy load of the transmission channel (several devices are involved);
  • the terms of the provider’s tariff plan (it is recommended to switch to a faster one).

If »the TV does not connect to the Internet?

The factors that block the connection and prevent you from turning on Wi-Fi on your Samsung TV are in most cases related to your router settings. This reason is obvious if other devices connected to the router cannot access the Internet.

If the devices used in the wireless network function properly, and the TV cannot access Wi-Fi, then the obstacles are recommended to be removed as follows.

Wi-Fi connection

The TV is set up automatically the first time it is switched on. If there is no cable connection from the router, the TV system will start searching for Wi-Fi by itself. How to connect a Samsung TV to the Internet when you turn it on again, let’s look at it step by step:

  • At the initial stage of the connection setup process, go to the “Network settings” parameter (in the “Network” tab). The transition is carried out using the “Settings” key (on the remote control).
  • The appearance of a “dark” screen will indicate that the device is ready to start the setup process. We activate the “Start” option.
  • At this stage, the TV system will offer to choose the type of connection: cable or Wi-Fi. Specify wireless and activate “Next”.
  • Time to identify all wireless networks (including ours) will take no more than 15 seconds. Wi-Fi search is carried out in the 2.4GHz band. The network name is defined as “SSID” (set by the parameters of the router).
  • Among the list of wireless networks installed by the TV, select our own and enter the password. If the network is not password protected, the connection is automatically activated.

Samsung Smart TVs have the Smart Hub function, which provides access to various media content.

Connecting your Samsung TV to the Internet wirelessly is described in the following video tutorial:

Router. Internet

Here, the reason for the lack of connection is the operation of the router. It is recommended to resume data transfer by:

  • reboot the device (you may need to perform a full reset);
  • elimination of interference in the signal transmission sector (it is proposed to reduce the distance between the TV and the router);
  • contacting the provider for information about the period of repair measures on the line;
  • disconnect the external Wi-Fi device (when using it). It is recommended to remove the module from the USB port and reinstall it after a few seconds.

It should be borne in mind that in the absence of a file with network characteristics (after activating Hard-reset), you will need to call a specialist of the company providing Internet services.

Reboot equipment

It is often a simple reboot to eliminate the causes that prevent the connection. Here it is suggested to turn off the router with the TV for two minutes and resume the setup procedure when the devices are turned on.

READ  Samsung TV won't connect to wi-fi

How to connect Wi-Fi to Samsung TV step by step

The ever-growing line of Smart TV applications developed by Samsung is only suitable for smart TV models. However, only Samsung went the farthest and adapted more than 300 applications, and then there are more and more of them.

It will be useful for the reader to master the ability to connect Samsung Smart TV to the Internet via a WI-FI router. The manufacturer’s instructions for many seem more than confusing, and the article on how to connect Wi-Fi on Samsung will simplify the setup process and save you time. Indeed, owners of TVs with Smart TVs who connect their devices to the network via WI-FI will have more advantages than after connecting via a local network. Our step-by-step instructions will help you master the process of setting up Samsung to the Internet via WI-FI.

The advantage of connecting Smart TV to Samsung via a WI-FI router will be to get rid of household wires underfoot. And the sufficient speed of the Internet connection will relieve you of discomfort during playback, that is, it will protect the online broadcast on Smart Samsung from freezing and any interruptions.

Connection

To enable the Samsung Smart TV browser, you need to connect it:

  • a local wired network via a twisted pair through a TV router;
  • with a wireless Internet network, that is, directly via WI-FI, if Smart TV Samsung has a built-in WI-FI adapter;
  • using a WI-FI router (USB), setting up the connection through the connection menu, and choosing the desired options.

To find the desired item, you need to go to the Smart Hub by selecting the corresponding key on the control mouse from its menu. “Samsung Apps Store” will provide the option you like.

It is more convenient to connect the TV to the Internet via a direct connection or through a router. To do this, it is enough to connect the cable from the network provider to the television “Ethernet” connector. If the type of ISP does not support the direct connection function, you need to use a router that will help you manage your home network wisely.

For now, let’s leave the option of connecting a WI-FI router and a TV to the Internet via a LAN cable (twisted pair). Let’s take a smarter way and figure out how to connect Wi-Fi to Samsung.

Connecting to Wi-Fi without DHCP

DHCP is responsible for resolving errors in the transfer of dynamic IP addresses and other configurations. If you need to connect to a wireless network without taking into account the distribution of network addresses, you should disable automatic installation and enter the parameters manually (IP, gateway address, DNS, subnet mask). The required information is presented on the case of the router.

The next step is to eliminate errors in the DHCP session, which provides access to Wi-Fi to the rest of the devices involved in the network and distributes IP addresses. The addresses of all devices should be saved in the router’s memory (by entering the MAC addresses). This procedure will prevent errors in the allocation of addresses between devices operating in the network (each device will receive an IP address without hindrance).

This method of connecting to a router is not popular, since in most cases (in case of difficulties) users prefer to contact the services of specialists in setting up network equipment.

READ  How to connect an old Samsung TV

Reboot equipment

It is often a simple reboot to eliminate the causes that prevent the connection. Here it is suggested to turn off the router with the TV for two minutes and resume the setup procedure when the devices are turned on.

Set Smart TV settings manually

Before you start setting the parameters in the TV system, go to the router settings and deactivate the DHCP (Dynamic Configuration Protocol) function. In the TV menu “Network settings”, set the IP address and IP gateway parameters (the gateway IP corresponds to the address in the router settings. 192.168.1.1).

If your router model is TRENDnet, the IP address is 192.168.10.1.

  • IP address: 192.168.1.102 (you can enter any local address: 192.168.1.103 or 192.168.1.105, for TRENDnet. 192.168.10.102);
  • subnet mask: 255.255.255.0;
  • gateway: 192.168.1.1;
  • DNS server: 192.168.1.1.

Entering the settings manually usually solves the problem of lack of wireless connection.

connect, wi-fi, samsung

Wi-Fi connection

The TV is set up automatically the first time it is switched on. If there is no cable connection from the router, the TV system will start searching for Wi-Fi by itself. How to connect a Samsung TV to the Internet when you turn it on again, let’s look at it step by step:

  • At the initial stage of the connection setup process, go to the “Network settings” parameter (in the “Network” tab). The transition is carried out using the “Settings” key (on the remote control).
  • The appearance of a “dark” screen will indicate that the device is ready to start the setup process. We activate the “Start” option.
  • At this stage, the TV system will offer to choose the type of connection: cable or Wi-Fi. Specify wireless and activate “Next”.

SamsungSmartTV: How To connect WiFi/Internet in Samsung Smart TV |How to Setup HotSpot in SmartPhone

  • Time to identify all wireless networks (including ours) will take no more than 15 seconds. Wi-Fi search is carried out in the 2.4GHz band. The network name is defined as “SSID” (set by the parameters of the router).
  • From the list of wireless networks installed by the TV, select our own and enter the password. If the network is not password protected, the connection is automatically activated.

After successfully connecting Wi-Fi to the Samsung TV, users are advised to go to the “Menu”, then go to the “Support” option and then to the “Smart Hub”.

connect, wi-fi, samsung

Samsung Smart TVs have the Smart Hub function, which provides access to various media content.

Connecting your Samsung TV to the Internet wirelessly is described in the following video tutorial:

Eliminate interference that affects signal quality

Obstacles in the form of many concrete partitions and furniture negatively affect the quality of the connection. In order to maintain a stable transmission rate and to avoid intermittent disconnections when working on the network, it is recommended to reduce the distance between devices.

Wi-Fi connection

The TV is set up automatically the first time it is switched on. If there is no cable connection from the router, the TV system will start searching for Wi-Fi by itself. How to connect a Samsung TV to the Internet when you turn it on again, let’s look at it step by step:

  • At the initial stage of the connection setup process, go to the “Network settings” parameter (in the “Network” tab). The transition is carried out using the “Settings” key (on the remote control).
  • The appearance of a “dark” screen will indicate that the device is ready to start the setup process. We activate the “Start” option.
  • At this stage, the TV system will offer to choose the type of connection: cable or Wi-Fi. Specify wireless and activate “Next”.
  • Time to identify all wireless networks (including ours) will take no more than 15 seconds. Wi-Fi search is carried out in the 2.4GHz band. The network name is defined as “SSID” (set by the parameters of the router).
  • Among the list of wireless networks installed by the TV, select our own and enter the password. If the network is not password protected, the connection is automatically activated.
READ  Is it possible to connect a mouse to the ipad

After successfully connecting Wi-Fi to the Samsung TV, users are advised to go to the “Menu”, then go to the “Support” option and then to the “Smart Hub”.

Samsung Smart TVs have the Smart Hub function, which provides access to various media content.

Connecting your Samsung TV to the Internet wirelessly is described in the following video tutorial:

Useful Tips

What will help the owner of Samsung Smart TV when connecting the gadget to a Wi-Fi router? If the wireless Wi-Fi response is weak, diagnostics should be performed using the instructions of the inSSider program, switching to a freer network channel. If Samsung does not have a built-in Wi-Fi adapter, you should purchase an external wireless device and connect to the web using it. It is important to select a USB Wi-Fi router model compatible with the TV model you purchased.

Set Smart TV settings manually

Before you start setting the parameters in the TV system, go to the router settings and deactivate the DHCP (Dynamic Configuration Protocol) function. In the TV menu “Network settings”, set the IP address and IP gateway parameters (the gateway IP corresponds to the address in the router settings. 192.168.1.1).

If your router model is TRENDnet, the IP address is 192.168.10.1.

  • IP address: 192.168.1.102 (you can enter any local address: 192.168.1.103 or 192.168.1.105, for TRENDnet. 192.168.10.102);
  • subnet mask: 255.255.255.0;
  • gateway: 192.168.1.1;
  • DNS server: 192.168.1.1.

Entering the settings manually usually solves the problem of lack of wireless connection.

What you need to know?

In the process of preparing Smart TV for connection, it is recommended to clarify a number of criteria that will determine how to set up the Internet on a Samsung TV.

  • The presence (absence) of a built-in Wi-Fi adapter. If there is no such module, you will need to ensure its availability and connect via USB (synchronization with the television system will occur automatically).

Watch a video review of an inexpensive Samsung TV network adapter:

Samsung Smart TV Won’t Connect to Wifi Fix it Now

It should ”take into account that when choosing an adapter, it is necessary to take into account the TV model, since the compatibility of devices is determined individually.

  • Wi-Fi connection parameters. Here you should take into account the terms of the provider’s tariff plan, signal quality, router functionality, etc. If you plan to view previously downloaded media content (to a computer), it is enough to use WI-FI-D technology This method involves synchronizing the TV with a PC, duplicating the contents of the computer monitor and subsequent viewing of content on the big screen.

Direct activation excludes the possibility of using Smart TV as a device for Internet access and does not allow working with applications. No router is required with this method.