How to connect the Internet on PC via iPhone

How to connect iPhone to computer as a modem?

The user-friendly interface of the iOS operating system allows you to execute any command on the iPhone in a few steps. After reading this guide, you will learn how to activate tethering mode via USB on iPhone.

USB cable connection

In order to access the Internet from a PC using a USB cable, you need to connect the Iphone to the computer, it is best to do this using the original cable, other cables may make an incorrect connection, or not at all, then an inscription will appear on the phone screen that the accessory is not supported. When you plug the cable into the computer, the question “Trust this computer?” Will appear on the phone screen, answer positively so that the connection is established. In Windows 10, 8 and Windows 7, Apple iTunes must be installed (you can download it for free from the official website), otherwise the connection will not appear.

Then find your IPhone in network connections and connect, the password is set in the phone.

iPhone : Share Internet connection with Your PC using USB cable | NETVN

Features of the

  • make sure you have a package with gigabytes or have enough funds on your balance to connect to the Internet;
  • iPhone sees a stable 3G or 4G LTE connection;
  • the computer port defines the devices connected to it;
  • original lightning is used;
  • the computer must have the latest version of iTunes installed.

If all conditions are met, proceed with the setup.

Limitations

When the smartphone is connected to a PC via a USB port:

  • Discharges faster than usual, but when connected via USB, the battery charge remains at the same level, and in moments of “idle” it gradually charges.
  • GSM module is active, so you can receive SMS and calls.
  • When an incoming or outgoing call is made, the Internet is interrupted. Recovered at the end of the conversation.
  • WAN login from iPhone will also be available.
  • Tariffication of traffic from mobile operators is calculated by the number of received and sent packets.
  • If you do not have unlimited, you can check the traffic status in the settings of the network adapter by opening the “Status” parameter.

Windows 10 has a feature to set the limit for the traffic used. It will help you not to go into negative territory and stop the traffic flow in time.

Instructions

How to distribute the Internet from iPhone via USB is described in the following

connect, internet, iphone

  • Activate this function. You can see the steps required to connect the device as a modem.

To connect your iPhone via USB tethering, connect it via Lightning to your PC and select yes to the question “Trust this computer”? Next, the computer will configure the network adapter, detect a new network and connect to it. Also, through the new local network, the PC will have access to the Internet.

If this did not happen automatically, select your iPhone in the network settings and connect to it manually.

If your iPhone does not turn on tethering, this is the place for you.

How to use Iphone as a modem

The first step is to make sure that cellular data is turned on and you have access to the internet.

Then open the settings and look for “modem mode” there.

It happens that this function is not prescribed as a separate item in the settings in some versions of IOS. Then you need to go to the “cellular connection” and find the modem mode there.

If the desired item is not there, then you need to register the settings for the modem yourself. We select “cellular data network” and find the modem mode there. The same data (APN, username and password) are registered here as in the Internet settings. We reboot the phone and the modem mode appears in the settings as a separate item.

There are three ways to use the Iphone as a modem

Setting up a mobile connection

There are usually no problems with a cellular Internet connection, the connection and use is quite simple, because the basic SIM cards are sold with all the settings installed. You just need to install the card in your smartphone and start using all the privileges of access to the global network. But it happens that the ability to transfer information over a mobile connection is lost. In such cases, you may need to configure and turn on the network yourself. Also, the presented settings will be needed if you plan to use the iPhone as a modem.

Important! Thanks to the “iTunes” software, which is installed on a PC or laptop, you can perform many different actions together.

The settings for activating the connection to the cellular network are carried out in two stages, first, access is connected, and then the necessary data for each of the operators are installed and entered. The first stage consists of the following steps:

  • First you need to decide whether the transmission of information over the network is activated. This is done in the gadget settings. To check, you need to carry out the following combination: “Cellular”. “Settings”.
  • After that, you need to check the activation of two sliders under the names “Enable 3G” and “Cellular Data”. They should be connected and lit in green.
  • If the slider of the “Cellular Data” tab is inactive, then it is possible to connect only via Wi-Fi. It is also recommended to activate the point about enabling 3G, otherwise the device will receive and transmit information only according to the old EDGE standard. It has a very low speed (up to 470 Kilobits per second).

Note! The 4G connection is carried out in the same way, only the user is required to choose an LTE or 4G connection instead of 3G.

After all the above steps and settings are completed, you need to proceed to the second stage of work. In this case, you need to clarify and establish the correctness of the input of all data for the cellular connection. It is recommended to do this as follows:

  • Go to the “Cellular” section again. At the bottom of the section, you need to find an additional section called “Cellular data network” and select it to enter.
  • In this section, a block “Cellular data” will appear, in which there are three lines with names: APN, username, password.

Note! For each of the domestic operators, you need to enter different data. You can find them on the official website, call the hot line or enter the data listed below.

  • APN: internet;
  • Username: gdata;
  • Password: gdata.

Internet connection from MTS requires the following combinations:

  • APN: internet.mts.ru;
  • Username: mts;
  • Password: mts.

Beeline users need to enter the following combinations:

  • APN: internet.beeline.ru;
  • Username: beeline;
  • Password: beeline.

For users connected to Tele2:

  • APN: internet.tele2.ru;
  • Username: enter nothing;
  • Password: enter nothing.

Operator Yota requires the following data to be entered:

  • APN: internet.yota;
  • Username: do not enter anything;
  • Password: leave blank.

A small company “MOTIV” requires input:

  • APN: inet.ycc.ru;
  • Username: motiv;
  • Password: motiv.

National telecom operator Rostelecom, data:

  • APN: internet.etk.ru;
  • Username: leave blank;
  • Password: leave blank.

It is possible to simplify an already simple procedure and not enter data into the smartphone personally. In this case, you only need to call the hot line of the mobile operator and request that the settings be sent. After a certain time, the user will receive an SMS message with all the necessary information. After that, you don’t need to enter anything, just open the message, and all settings will be saved automatically.

Important! Remember to reboot your smartphone every time after entering data. The connection is activated only after switching on.

How to connect the Internet on a computer via an iPhone: 3 working ways

To work on the street or in a cafe, you do not need to look for an access point. Any modern smartphone can become a modem. He will also help you in case of problems with your home provider.

There are three ways how to connect your computer to the Internet via iPhone. If you have problems with one, you can sort out other options, and under any circumstances always stay in touch.

READ  How to Broadcast WhatsApp on iPhone

How to share Wi-Fi from iPhone?

If you don’t feel like reading, watch the video with instructions:

The iPhone works like a modem. Several devices can be connected to it at once. You do not need to be in the immediate vicinity of the phone. Signal range. 10-15 meters.

There are also disadvantages. The battery discharge rate increases several times. The smartphone will go down in 4 hours. Therefore, while the modem is operating, put the phone on charge.

  • Open “Settings” and enter the “Cellular” section.
  • Before connecting to the Internet on a laptop or PC via iPhone, you need to make sure that you have enabled cellular data transmission. The toggle switch opposite the inscription should be green.
  • Find the “Modem mode” section below and open it.
  • Here you can turn on distribution and change the password for Wi-Fi. By default, it is complex and difficult to remember. To change, you need to click on the “Wi-Fi Password” and enter a new one.
  • Turn on the modem mode by pressing the toggle switch opposite the inscription of the same name.
  • Open the network settings on your computer and find the hotspot. By default, it is called “iPhone (your name)”.
  • Enter the security key in the field that appears.
  • After a few seconds, the computer will connect to the smartphone. A blue bar appears at the top of the iPhone screen. This is a sign that the connection was successful.

If it doesn’t work, try restarting both devices!

USB connection

iPhone distributes the Internet via USB only to the device to which it is connected. It charges at the same time, so there is no need to worry about the battery running out quickly. If done correctly, the laptop will go online every time it is connected to the smartphone via cable.

To connect, you need to do the following:

  • Go to “Settings”, open the section “Cellular”.
  • Make sure tethering is enabled.
  • Connect laptop and phone with USB cable.
  • Before the computer connects to Wi-Fi via the phone, the iPhone asks: “Should I trust this device?” Answer yes and enter your passcode.
  • Open your network settings. Your smartphone should appear among the available connections.
  • Enter the password in the special window.
  • The network will connect in a few seconds. If all goes well, a blue bar appears on the iPhone screen.

To disconnect the connection, simply remove the USB cable or exit the modem mode. The same should be done if it was not possible to connect the first time. Then just repeat all steps.

Bluetooth connection

The most unpopular way, as it requires additional time to connect. Plus, not all laptops have the feature you need.

The connection goes as follows:

  • Open iPhone settings and go to the “Cellular” section.
  • Find the inscription: “Modem mode” and make sure that the toggle switch opposite it is in the “ON” position.
  • Go back to “Settings” and find the “Bluetooth” section.
  • The toggle switch opposite the inscription of the same name must be green.
  • Before connecting your computer to the Internet via iPhone, you need to set up Bluetooth. First, make sure it is turned on. In some laptop models, a switch on the case itself is used for this.
  • Open the Bluetooth settings on your laptop. In Windows, you need to click on the arrow “Show hidden icons”.
  • Find the Bluetooth icon. Right click on it and open options.
  • Click on “Add Bluetooth or other device”.
  • After finding your phone, connect to it.
  • The Bluetooth Pairing Request window appears on the phone. Confirm Action.
  • Do the same on your laptop.
  • After that, the name of your smartphone will appear in the settings. Click on it, enter the password and connect to the network.

If it fails, try turning Bluetooth off and on on both devices. In rare cases, a reboot may be required.

The first two methods are usually used. They are more convenient and simpler. Bluetooth is a fallback if other methods don’t work. In any case, if you have an iPhone and a good mobile Internet, you can always stay connected, work and have fun.

USB cable as a way to transfer Internet from iPhone: advantages

In the modern active rhythm of life, situations often arise when the availability of the Internet in the iPhone is not enough for us, even if it is a large model. For certain work or personal purposes, we need to perform a number of actions on a PC or laptop, while a network connection is required, but there is no Wi-Fi or 3G modem. What to do in such an emergency?
The only solution in such moments is to “distribute” the Internet from the phone to the computer. There are three ways to transfer the Internet through an iPhone to a desktop or laptop:

  • via wi-fi
  • via bluetooth
  • via USB cable

The latter option has several advantages.

  • Firstly, wi-fi may not function everywhere, it all depends on your location. And we always take the USB cable with us, because it is necessary for recharging.
  • Secondly, the data transfer rate of cellular communication via USB will be incomparably higher. Information will load faster, applications will work faster, and you will save your time.

The method of transferring the Internet via Bluetooth also loses in comparison with USB: the Internet via Bluetooth is more difficult and longer to set up, and the speed ultimately turns out to be lower.
Finally, using a USB cable, you will simultaneously perform two essential things: and “distribute” the Internet to a PC / laptop, and from it your device will automatically recharge the battery. Saving!

So, the advantages are clearly enough to trust this method of Internet connection via iPhone. The main thing is to learn this process and do not forget to take a USB cable with you! Let’s just talk about the cable now and.

How to connect the Internet on a computer via iPhone via USB?

Which cable to choose: original or certified?

Apple fans fall into two camps. The first are those who prefer authenticity in everything, trusting the brand’s quality mark (if the smartphone is “apple”. then the accessories should only be from the same manufacturer, then the quality is definitely guaranteed).
The second are those who, over the years of passion for Apple products, have tried different options for additional accessories, and from personal experience can recommend proven certified devices (cables, headphones, etc.)

Introduction

Today in the article we will talk in more detail about the USB cable. It is not only an integral and multifunctional accessory for our iPhones, but also the first and most important addition to the device. It is the USB cable that we first of all take with us on the road and to work, without it is impossible to imagine the widespread use of the iPhone in general. After all, a USB cable is:

  • iPhone battery charger
  • a means of connecting our iPhones with a computer, through which we synchronize photos, music, applications and other data on a PC
  • the ability to charge the iPhone battery when there is no outlet and power-bank nearby: in the car or when connected to a laptop
  • convenient and high-quality way to “distribute” the Internet from iPhone to PC or laptop, when there is such a need

We will dwell on the last point in more detail in today’s article, telling all the advantages of this method of transferring the Internet, as well as providing the most simple and intuitive process instructions. So, let’s begin!

Detailed instructions for iPhone and PC settings for Internet “distribution”

The process of transferring the Internet from iPhone to computer is simple, and is done in literally a few steps:

  • Let’s connect our iPhone to the computer using a USB cable.
  • Swipe up on the main screen to open the bottom menu and make sure that mobile internet is turned on on the iPhone.

From the very bottom edge of the main screen, swipe up

Make sure the internet is connected

  • On iPhone, go to Settings, open Tethering.
READ  iPhone hangs on apple and won't turn on

After these steps, the Internet will automatically turn on on the computer.
To check, go to the browser and type the address or request in the line. the Internet connection will work.

As you can see from the process of reading the article, the “distribution” of the Internet via USB, in fact, has a number of advantages over other methods.
Taking a USB cable with them as an obligatory, daily necessary accessory, the owners guarantee themselves stability in several directions: the battery charge of their device and a lot of use options thanks to synchronization with a computer. Including, stable and fast Internet on your PC, received from the iPhone.
All that remains is to choose a trustworthy product from the wide variety of USB cables on the market today. We hope that we managed to highlight the most important issues of the topic under discussion, and clearly show you the connection process.

We wish you productive work and fun, let your devices function efficiently, and your accessories last a long time and live up to their name.!

Is it possible to share the Internet from iPhone to computer?

IOS has a wonderful function “Modem Mode” (access points), which allows you to distribute the Internet from your iPhone or iPad to any device. other smartphones, laptops or a desktop computer. Using the function, you can share the Internet via Wi-Fi or via a USB cable and Bluetooth.

How to make a distribution of the Internet from a phone to a computer?

  • Connect your smartphone and computer with a USB cable
  • Go to Android settings
  • Select the section “Wireless networks”
  • Click on “”.
  • Select modem mode.
  • Press the USB tethering button

How to see who is connected to the iPhone?

Go to [your name] Settings and scroll down. Select the name of any device to view information such as model, serial number, operating system version, whether the device is trusted, and can be used to obtain Apple ID verification codes.

How to share Internet via USB iPhone Windows 10?

USB connection (like 3G or LTE modem)

To use the iPhone in modem mode via a USB cable (use the native cable from the charger) in Windows 10, 8 and Windows 7, Apple iTunes must be installed (you can download it for free from the official website), otherwise the connection will not appear.

How to connect the Internet from iPhone to computer?

How to use iPhone as a modem

  • Connect iPhone to Computer
  • Go to Control Panel. Network and Internet. View network status and tasks and make sure the connection is activated
  • If this connection is not displayed, restart your computer and reconnect your iPhone.

How to distribute Internet from Xiaomi phone to computer?

How to distribute the Internet from a Xiaomi phone

  • Open the Menu and go to the “Settings” of the phone
  • Open the “Wi-Fi hotspot” section
  • Place the switch in the “ON” position.
  • Set your Wi-Fi network name and password.
  • That’s it, you’ve turned on tethering on your Xiaomi phone.

How to share internet from iPhone to Mac?

Do one of the following: Connect a Mac with Wi-Fi and Instant Hotspot access. On a Mac, click on the Wi-Fi icon in the menu bar to select your iPhone from the list of available networks. Mac and iPhone must be signed in with the same Apple ID, and must have Bluetooth and Wi-Fi enabled.

How to connect iPhone to computer as a modem?

How to use iPhone as a modem

  • Connect iPhone to Computer
  • Go to Control Panel. Network and Internet. View network status and tasks and make sure the connection is activated
  • If this connection is not displayed, restart your computer and reconnect your iPhone.

How to connect the Internet from iPhone via USB?

Make sure you have the latest version of iTunes installed on your Mac or PC. Then connect your iPhone or iPad to your computer using the supplied USB cable. If you are prompted to Trust this computer ?, click the Trust button. Learn more about tethering to an iPhone or iPad.

How to share Internet from iPhone to Windows 7 computer?

USB connection (like 3G or LTE modem)

To use the iPhone in modem mode via a USB cable (use the native cable from the charger) in Windows 10, 8 and Windows 7, Apple iTunes must be installed (you can download it for free from the official website), otherwise the connection will not appear.

How to distribute the Internet via USB?

How to connect an Android smartphone as a USB tethering

  • Connect your phone to PC via USB. If this is a new device, wait until the drivers are installed.
  • Open your smartphone settings. In the section “Wireless networks” (“Network”) find the item “Modem mode” (“Modem and access point”).
  • Activate USB tethering.

How to use iPhone as a hotspot?

To operate the modem mode and distribute the Internet via Wi-Fi, you need to register the access point of your operator. To do this, open the system settings, the “Cellular” menu and go to the “Cellular data network” section. The tab contains three blocks of filled fields: “Cellular data”, “MMS” and “Modem mode”.

How to distribute the Internet from a phone via USB?

How to connect a smartphone as a USB modem

After connecting your smartphone, open its settings and in the “Wireless networks” section, select “”. A section of additional settings will open in front of you, where we are interested in the item “Modem mode”. Here you need to check the box next to the “USB-modem”.

We bring the Internet through a cable to a new PC

In a situation where you need to connect the network to a new device, the algorithm will be slightly different. In such a situation, you will need to create and configure a connection from scratch. Initially, you will need to insert the cable directly into the network card of your computer.

If the manipulations are performed correctly, then in the lower right side of your computer or laptop you will see a symbol indicating the connection you just created.

Internet connection without a router

To provide a direct connection from your ISP to your PC’s network card, you need to plug the cable directly into a port called Ethernet. It is located on the back of the computer.

Step-by-step network configuration in Windows 7:

How to connect a computer to the Internet

Often, there are many problems when you need to connect a computer wirelessly to a router or router. And if a network cable is used for this process, then there are usually no obstacles. Please note that this connection requires an active Internet connection.

At the same time, it should be understood that even in such simple manipulations, some difficulties and errors may arise, which will result in the fact that even when connecting the cable Internet via a LAN cable, the device will not gain access to the World Wide Web.

In this article, we will look at how you can connect the Internet via a cable to your computer or laptop. All manipulations are considered on the example of the Windows 7 operating system, but they will also be true for later versions.

How to connect cable internet to a computer

In order to do this, we need:

Next, we need to take a network cable, and then connect it with one end to the yellow LAN connector located on the back of the router. It does not matter which of several connectors the cable will be connected to. The other end must be connected to the corresponding connector on the device.

Now check to see if the LED is on, indicating that a computer has been connected to the LAN connector. If so, then you need to look at the computer display. On the notification panel, in the lower right corner, the connection status should be displayed without error marks. If so, then the device is connected to the Internet.

[blockquote_gray “] How to flash a ZTE ZXV10 H108L modem [/ blockquote_gray]

Why is the internet not working? Solution of problems

The reasons can be varied, and to eliminate each of them, you will need to perform certain actions.

  • Check if the internet cable is connected. Make sure that the cable is actually connected and that it is plugged into the correct connector.
  • Faulty cable or network card or LAN port on the computer does not work. If there are no problems with the cable connection, then you should make sure that the computer is actually connected to the network. Pay attention to the indicator on the router or near the connector in the PC. Also, at the bottom of the taskbar, the connection icon will be covered by a red cross. In this situation, it is necessary to repair the network card or troubleshoot the cable.
  • The network is not working although the indicator is flashing. In such a situation, you first need to install / reinstall the network driver.
  • Is the driver installation complete but there is no connection? Go to the control panel, and then to the network control center. If the word “Disabled” is grayed out next to the Ethernet connection, right-click on the connection and then click on “Enable”.
  • The connection should be configured. You can find how to do this in the article above.
  • The router is defective. If the cable is not connected directly to the PC, but through a router, then the malfunction may be caused by the wrong router settings. Check this by connecting the network cable directly to the device.
  • The period paid for the provider has ended. Contact the technical support of the provider and check the status of the balance.
  • The connection was blocked by viruses. It is necessary to check the entire system using antivirus.
READ  Are the headphones included with the iPhone

How to distribute Internet from iPhone to laptop?

How to share Wi-Fi from iPhone to laptop or other smartphone

  • Open “Settings” and go to the “Cellular” section.
  • Find the item “Modem Mode”.
  • Activate the item “Allow others”. it is important that other users can connect their devices to your Wi-Fi network.

How to distribute the Internet from iPhone to PC via cable?

How to use iPhone as a modem

  • Connect iPhone to Computer
  • Go to Control Panel. Network and Internet. View network status and tasks and make sure the connection is activated
  • If this connection is not displayed, restart your computer and reconnect your iPhone.

How to use iPhone as a hotspot?

To operate the modem mode and distribute the Internet via Wi-Fi, you need to register the access point of your operator. To do this, open the system settings, the “Cellular” menu and go to the “Cellular data network” section. The tab contains three blocks of filled fields: “Cellular data”, “MMS” and “Modem mode”.

How to connect modem mode via USB?

How to connect an Android smartphone as a USB tethering

  • Connect your phone to PC via USB. If this is a new device, wait until the drivers are installed.
  • Open your smartphone settings. In the section “Wireless networks” (“Network”) find the item “Modem mode” (“Modem and access point”).
  • Activate USB tethering.

How to share Internet from iPhone to Windows 7 computer?

USB connection (like 3G or LTE modem)

To use the iPhone in modem mode via a USB cable (use the native cable from the charger) in Windows 10, 8 and Windows 7, Apple iTunes must be installed (you can download it for free from the official website), otherwise the connection will not appear.

How to distribute on iPhone?

  • Open the “Settings” menu.
  • Select in the menu: iPhone (iOS 6): “General” → “Network” → “Cellular data network”;
  • Scroll down the page and select the Personal Hotspot section. Recommendation
  • In the “Modem Mode” section, enter the following settings: APN.
  • Reboot your phone.

Is it possible to distribute the Internet via a USB cable

Technologically, smartphones have already caught up with computers and laptops in their performance. The only difference is the operating system platform, as well as the presence of an active Internet connection. Wi-Fi is not always available, and mobile operators cannot guarantee high-quality communication and access to the global network everywhere. But it is necessary to resolve issues and problems that have arisen on a mobile device, including such elementary tasks as:

  • download games, applications or documents;
  • find the information you need;
  • update the operating system and applications for their correct operation;
  • use the device as a multimedia device: for watching movies, photos, presentations.

We distribute the Internet from computer to phone: how to do it for Android or Iphone

Smartphones entered our life not so long ago, but during this time they managed to literally capture it. Unfortunately, some features of Smart gadgets can only be unlocked if you have a high-speed Internet connection. And mobile operators are in no hurry to build up a stable and high-quality coverage of the global web, and traffic can “bite”. Therefore, the safest way is to connect your smartphone to the Internet via a personal computer.

What to do if the Internet does not start

Sometimes there are cases when all the instructions are followed, but the traffic is still not going to the smartphone. Do not rush to get upset, most likely the firewall service is running on the PC. It is a kind of firewall that blocks questionable computer networks. Therefore, we fix the situation by disabling the firewall:

    Open the “Control Panel”, select the item “Windows Defender Firewall”.

Selecting “Windows Defender Firewall” in the PC Control Panel

On the right, click on the button “Turn Windows Firewall on or off”.

Go to the page for disabling firewall elements

We move the toggle switches to the items “Disable firewall” and save the changes by clicking OK.

Disable firewall for stable operation of computer networks

As a result, the blocking factor will be disabled and the network will work properly.

The firewall function can be taken over by your system’s antivirus. In this case, you need to disable the defender’s firewall. It is recommended to do this before creating a local connection with the computer.

How to connect an Android smartphone to the Internet

Android devices are the most common. They attract with their cheapness and good performance, and their functionality is developed in all areas necessary for the user. Creating a local network by connecting via a USB cable using standard tools is also included in the system’s capabilities. To distribute Internet traffic, you only need a gadget, a cord and a computer with an active Internet connection.

Setting up a connection on a computer

So, the local network between the smartphone and the computer has been created. It remains only to distribute the Internet within this network. To do this, you need to do the following steps:

    Press the key combination on the WinR keyboard, in the window that opens, enter the control command and click OK.

Enter the command control in the Run window and click OK

You must open the “Network and Sharing Center” section

Next, go to “Changing adapter parameters”

Opening the properties of the Internet traffic provider network

In the settings of the “Access” tab, check the boxes and save the changes

We open the properties of the network-consumer of Internet traffic

After that, you need to save all the changes and test the Internet on your smartphone.

Setting up a connection on a smartphone

First, you need to tweak some settings on your Android device. This is necessary to create the correct connection not only for the local network, but also for the Internet channel. You need to do the following:

    Open the smartphone settings, scroll down the list and click “For Developers” in the “System” column.

Find and select the item “For Developers” in the smartphone settings

We put a tick next to the item “Debugging via USB”

We select the item “Advanced” in the main settings of the smartphone

This completes the preparatory work with the smartphone. We pass to the order of actions on the computer.