How to connect iPhone 11 Pro to computer

Table of Contents


A quality alternative to iTools with a similar style and feature set. The advantage is a less overloaded interface, which is easier for beginners to understand.
But the shortcomings can easily be attributed to rare updates. iFunBox stopped in development after the iPhone 7, and therefore copes with technology, starting with 4, 5S and 6. better than with new products.

How to connect iPhone to computer or laptop: via USB cable and Wi-Fi

Hello everyone. Today we will consider the question. how to connect an iPhone to a computer. Apple’s closed operating system architecture continues to force iPhone, iPad or iPod Touch owners to use a PC to transfer entertainment content, files and documents. Therefore, it is important to know: how the connection is made, what equipment is needed, and are there alternatives to the overloaded iTunes. It’s time to figure out the details.

Connection options

The standard set of mobile equipment from Apple provides for a special cable for charging or connecting to a PC. From a technical point of view, you don’t need more to connect an iPhone to a computer or laptop. But it is advisable to understand many of the nuances separately, using a kind of step-by-step instructions.

Driver search

In rare cases, when an iPhone is connected to a PC, the Windows operating system is not able to load drivers for identifying mobile equipment. The Driver Booster tool is able to cope with the task in automatic mode. The necessary components will be added immediately, which will eliminate half of the possible problems and malfunctions.

Download software

Without a special media player from Apple called iTunes, it is almost impossible to interact with mobile equipment connected to a computer or laptop. From the same iPhone, iPad or iPod Touch. you can only pull out photos.

connect, iphone, computer

If you download iTunes, the functionality will expand: downloading music and books, preparing backups, updating the operating system. If you log in, iTunes will allow you to watch movies or use third-party services like Apple Music.

Interacting with iTunes is easy. Immediately after installation, it remains to go to the parameters of the iPhone, iPad or iPod Touch, and then on the left side of the interface you need to select the appropriate sections for viewing and using.

Alternatively, if you wanted to download a movie, then you need to open “Shared Files”, scroll to the “Add” item, and then select the appropriate content to download. Videos, music or documents will appear in the application in which they were originally added.

An alternative option is to add content to the library using the File button at the top of the interface. In the future, it will remain to select those films that need to be synchronized and click on the “Apply” button. The only difference is in the “source”. Synchronization of the library provides for the transfer of content to “native” sections, such as “Music” or “Gallery”.

Why the problem occurs

If connecting iPhone to PC ends with an error, then it is recommended to look for the reasons at each of the stages. It is recommended to start with Windows and clean up the system directory located along the path: C: \ ProgramData \ Apple \ Lockdown.

In some situations, extra files interfere with the operation of important services and processes.

Next. reinstalling iTunes. Uninstalling the previous version will help special software. like “IObit Uninstaller”, which can “clean up” the remaining components, libraries and files left in the system. Then. it remains to reboot and try again.

If there are no changes, it is worth changing the USB cable or the connector used for connection. The last step is to look into the “Settings” section, the “Reset” menu and agree to roll back the system to the factory settings. The procedure will not take much time, and important data will not be lost if a suitable backup has already been prepared.

Preliminary preparation. Finding a cable, preparing software and downloading drivers

The connection begins by searching for the appropriate connectors, software and drivers, but first things first:

FAQ. Modem mode, viewing files through “Explorer”, troubleshooting

Outside of standard synchronization, the iPhone allows you to view some of the information as from a “flash drive” and offers to share megabytes of traffic. And also. he often encounters errors due to which there are connection problems. And therefore. about everything in order:

Creating a Wi-Fi Network on Mac in OS X

I didn’t have a Windows-based computer at hand, we will consider the procedure for creating a network on a Mac, for Windows I will describe the procedure in text.

    For Mac OS X go to System Preferences. Network “and in the list on the left select” Wi-Fi “.

Click on the “Network Name” dropdown list and select “Create Network”.

In the “Create a computer-to-computer network” window, enter the name of the network, the channel can be left by default, in my case the 11th and opposite “Security” click on “Not selected”.

  • In the drop-down list, select the type of data encryption when transmitting over the wireless network:
  • not selected. encryption is disabled, no password is required to connect to the network, anyone can access the wireless network (even an attacker);
  • 40 bit WEP. encryption type WEP (Wired Equivalent Privacy) password length: 5 ASCII characters or 10 hexadecimal digits (when you enter enough characters, the Create button will become active).
  • 128 bit WEP. WEP encryption type password length: 13 ASCII characters or 26 hexadecimal digits.
  • Personally, I don’t understand why Apple recommends setting WPA2 encryption for Wi-Fi networks, while in OS X only WEP with different key lengths is available, but you don’t have to choose.

    Tip: On OS X, choose the encryption type with the maximum key length, i.e. “140 bit WEP”, the password will need to be entered only 3 times, 2 times when creating a network (input and confirmation) and 1 time on the iPhone when connected. The network settings in the iPhone are saved automatically, and when the created network is available, the device will connect to it “automatically” (you do not need to enter a password to a known network each time you connect).

    Select the desired encryption type and click on “Create”.

    A wireless Wi-Fi network will be created, the Mac will be automatically connected to it (since it is its source), it remains to connect the iPhone to the created network.

    On iPhone (or iPad) go to “Settings.Wi-Fi” and turn on the Wi-Fi module of the device with the corresponding switch.

    The wireless network created in Mac OS X will appear in the “Select network” list, tap on its name and enter the password. Done!

    After connecting to the shared Wi-Fi network of iPhone and Mac, launch iTunes and your device will appear in the “Devices” menu.

    Ways to Connect iPhone to Computer

    Initially, it was possible to connect an iOS device to a computer only with the USB cable supplied with the device, but with the advent of iOS 5 and iTunes 10.5, a second, more universal one appeared. via a wireless Wi-Fi network.

    Today (iOS 7.1.2 and iTunes 11.3 are relevant), you can connect your iPhone or iPad to your computer in 2 ways:

    • USB cable;
    • wireless Wi-Fi.

    With the first method, there are no problems, just connect one end of the cable with a USB connector to the corresponding port of the computer (these can be USB 2.0 and USB 3.0 ports), and insert the other into the iPhone or iPad connector.

    Connecting iPhone wirelessly requires more. If you have a wireless router and there are no difficulties here: turn on Wi-Fi in the settings of the iOS device (the corresponding switch in “Settings. Wi-Fi”), select the network created by the Wi-Fi router and wait for the connection.

    What to do for those who have only a computer with a Wi-Fi module, for example, a laptop, and an iOS device? It is necessary to create a separate wireless computer-to-computer network, but first things first.

    How to connect iPhone to computer via Wi-Fi

    The only requirement that must be met to connect an iOS gadget to a computer wirelessly is that the device and the computer must be connected to the same network.

    • using a wireless router (Wi-Fi router);
    • using Wi-Fi module of a computer (laptop).

    If you use a wireless router to organize a wireless network, which creates a shared Wi-Fi network, there are no problems. It is enough to connect your computer and iPhone to this network and activate the function of syncing the device with iTunes via Wi-Fi.

    Create a Wi-Fi network to connect iPhone to Windows laptop

    If there are no problems with the compatibility of iOS devices with desktop or laptop computers (the connection is stable), then sometimes difficulties arise when connecting an iPhone to a Windows-PC via Wi-Fi:

    • iPhone and iPad won’t connect to WPA2-encrypted Wi-Fi
    • iOS devices do not connect to 802.11n Wi-Fi networks if WMM (Wi-Fi Multimedia) is disabled (Solution).
    READ  How to switch from Android to iPhone

    In a Windows environment, the DCHP server, which is responsible for assigning an IP address to connected devices, does not always work correctly and stably, therefore, when distributing addresses in automatic mode (when the DHCP server is enabled), the computer-iPhone wireless connection may be unstable. This is why the wireless network adapter on your computer needs to be assigned a static IP address:

      In Windows 7, go to Control Panel. Network and Sharing Center “and click on” Change adapter settings “.

    Right-click on “Wireless Network Connection” to open the context menu and select “Properties”.

    In the list “Selected components are used by this connection” select “Internet Protocol Version 4 (TCP / IPv4)” and click on the “Properties” button.

  • Check the boxes next to “Use the following IP address” and “Use the following DNS server addresses”, enter in the appropriate fields:
  • IP address: 192.168.хxx.хxx;
  • Subnet mask:;
  • Default gateway: leave blank;
  • Preferred DNS Server: Leave blank;
  • Alternate DNS Server: Leave blank.
  • Instead of “”, specify the parameters of your subnet (the first “xxx”) and assign a fixed address (the second “xxx” from 1 to 254).

    If you are using a wired LAN connection to the Internet and it is assigned the IP address “” or “”, the wireless connection should be assigned the address “”.

    Wireless and LAN IP addresses do not have to match and be on the same subnet.

  • Check the box next to “Confirm parameters on exit” and click on “OK”.
  • In the Network and Sharing Center, you need to create a computer-to-computer wireless network (point-to-point or Ad-Hock), to do this, click on “Set up a new connection or network”, select “Set up a computer-to-computer wireless network” and click “Next” twice.
  • On the “Give this network a name and select security options” page, fill in the fields:
  • Network name: enter any name for your Wi-Fi network (SSID);
  • Security type: select WEP;
  • Security key: enter the password for the wireless network, it will need to be entered on the iPhone when connecting to this network;
  • Check the box “Save this network settings” if you plan to connect the device to the computer via the specified network permanently and click “Next”. Network setup starts.
  • In the Network window “Network SSID is ready to use”, click on “Enable Internet Connection Sharing” if your computer has a wired Internet connection. This will make it possible to “share” the Internet from a computer via Wi-Fi to an iPhone, i.e. iPhone will be connected to the Internet via a computer (PC will act as a gateway).

    In the window that says “Internet Connection Sharing is turned on”, click “Close.” The wireless network is created, the computer is automatically connected to it (you do not need to connect it separately) and is waiting for devices to connect wirelessly.

  • On iPhone, go to Settings. Wi-Fi “and turn on the switch of the wireless module.
  • After the created network is found, tap on its name and wait for the device to connect to it. Done!
  • You can use a Wi-Fi connection between your iPhone and your computer for wireless syncing, backing up, downloading music, videos, importing contacts, installing apps and games from the App Store, etc.

    How to connect iPhone to computer with USB cable

    Each iOS device comes with a standard cable with a USB connector on one end and a 30-pin or Lightning connector (depending on the iOS device model) on the other, in the Apple community it is usually called a “lanyard”.

    USB cable with 30-pin connector for connecting to a computer: iPhone 2G-4s, iPad, iPad 2, iPad 3, iPod Touch up to 4G.

    Lightning connector can connect to PC: iPhone 5, 5c, 5s, iPad 4th and 5th (iPad Air) generations, iPad Mini, iPad Mini with Retina display, iPod Touch 5G and iPod Nano 7th generation.

    • sync iPhone with computer: transfer contacts, notes, email account settings, calendars, Safari data;
    • restore and update iOS;
    • back up data to iTunes and iCloud;
    • restore data from backups;
    • install and remove applications from the App Store;
    • download music, videos, photos and books to iPhone memory;
    • unload content from iPhone.

    How to create a Wi-Fi network to connect an iPhone

    It is not difficult to create a wireless network using a computer with a Wi-Fi module, a laptop, for example, but to connect an iOS device to it, you need a number of features from Honor.

    When creating a Wi-Fi network, I suggest using the recommended settings for routers and Wi-Fi access points from Apple.

    How to connect an iPhone to a computer via USB and Wi-Fi Creating a Wi-Fi network to connect an iPhone in Windows and Mac OS X

    Yes, connecting an iPhone or iPad to a personal computer based on Windows or Mac OS X is elementary, and with the release of iOS 5 and iTunes 10.5, this can be done not only with a standard USB cable. If you know all the ways to connect “iPhone. computer” and you have no problems with this, pass by, the rest. welcome “under the cut”.

    Perhaps, after reading the title, experienced iOS-users will bombard me with “rotten” comments and have the right to do so, because connecting an iPhone to a computer is elementary simple.

    As part of today’s publication, we will look at ways to connect iOS devices (iPhone and iPad) to a personal computer based on Windows and Mac OS X, get acquainted with the advantages and disadvantages of each method and try to find the best.

    Benefits of connecting iPhone to computer via USB:

    • high data transfer rate;
    • everything is elementary simple;
    • you can download (upload) music, videos, ringtones and photos to the iPhone without synchronization using file managers like iFunBox and iTools;
    • you can install and uninstall applications (games and software) through file managers (the same iFunBox and iTools) without syncing iPhone to iTunes;
    • allows you to charge your device.


    Note that a large amount of power is always needed to start the synchronization process. Therefore, charging when in offline mode must be at least 20%. If you look at the official information, then you can proHonor recommendation of the obligatory connection to the mains of the device, in order to avoid disruption of the synchronization process.

    Follow our instructions. First, we will install and test special software. Let’s start with a stationary computer or laptop, where we determine whether iTunes is connected or not. Download the application for synchronizing iPhone with PC to your computer or laptop, and tear it off in the standard way, if you have an installer.

    It is important to make a reservation here. The connection, although it assumes communication without a wire, however, the first setup will still require a cable with USB.

    Open the iTunes menu, find the “Overview” tab and the corresponding item “Sync with this iPhone over Wi-Fi.” Check the box and click “Apply”.

    By this action, you will find a specific Apple device in the immediate environment for synchronization on your computer monitor. Then remove the cord from the mobile device. Now you have configured a physical interface for sharing over a Wi-Fi network.

    Attention! Synchronization is only possible for media, text and backup files. If you try, for example, to synchronize databases, a message will pop up with a warning that this type of data has not been authorized.

    Synchronization starts directly from setting the settings in the main screen of the iPhone, by going to the “Settings” application. Moving down the menu, select and click “Sync with iTunes over Wi-Fi.” After that, summary information about active computers will become available.

    It remains only to confirm the intention to synchronize with the desired PC. This is done by clicking the “Synchronize now” button at the very bottom of the current window.

    I draw your attention to the following: if the connection is successful, the caption on the button should change to “Cancel synchronization”.


    Using iTunes wireless sync via Wi-Fi, it is convenient to send any movies and programs, make settings from both devices without any problems. True, the quality of data transmission will be slightly worse than that of a cable connection.

    • Connection to one Wi-Fi network;
    • Updating the operating system on the iPhone to at least the fifth version;
    • The presence on the PC of the proprietary application iTunes 6.

    Note: Many gadget owners may have outdated iPhone models (2 or 3G). They cannot be flashed to the specified OS version for technical reasons. That is, the official WI-FI synchronization will not take place. But as an alternative, it is permissible to use a third-party Wi-Fi Sync application.

    How to connect iPhone to computer and use iTunes, see the following

    How to Connect iPhone to Computer via Wi-Fi and iTunes Sync

    One of the features that enhance the capabilities of Apple mobile devices is synchronization with computers. And if earlier it was released using a cable connection via the USB interface, then the modern method involves wireless WI-FI technology. Here’s how to connect your iPhone to your computer in an official and alternative way.

    Difference between official and unofficial sync

    It exists and affects purely technical aspects. The difference is in the number of simultaneous connections. An unofficial utility allows you to access the exchange with only one computer in the iPhone settings. Whereas the official installation will already allow full synchronization of all PCs in the range of one Wi-Fi network.

    Possible mistakes

    The algorithm is simple, but how to sync an iPhone with a computer if an abnormal situation suddenly arises? Synchronization may not start the first time due to communication errors on the PC.

    In some cases, it is useful to reboot the PC. Still, the solution to problems is usually associated with the ports of the router. We are talking about ports TCP 123 and 3689, UDP 123 and 5353.

    Also check your PC firewall. Its current security policy may interfere with wireless sync.

    That’s all I wanted to tell you about. I think there will be no difficulties here. But if you have any questions or comments appeared during the reading, be sure to write! Bye everyone!

    Comparison of methods for connecting iPhone to computer

    All types of iphone to PC connection have their pros and cons. Each user chooses what suits him best.

    Comparative characteristics of the methods of connecting iphone to PC:

    • Connecting iphone without using iTunes.

    Doesn’t require iTunes to be installed on your computer, but only allows you to copy photos and videos from iPhone to PC. In this case, it is impossible to create a backup copy. Connection is via a USB cable.

    • Connecting iphone using iTunes software via USB cable.
    • restore from backup;
    • the ability to charge a smartphone;
    • faster data transfer rate than when connected via Wi-Fi;
    • the ability to reset to the original settings.
    • occupies USB ports of a computer, which there may be few on a PC or laptop;
    • short range.
    • Connecting iphone using iTunes, via Wi-Fi network.
    • large radius of action;
    • no need to use a USB cable, which excludes the possibility of accidentally touching and disconnecting it;
    • does not occupy free USB ports of the PC.
    • discharges the phone;
    • lower data transfer rate than when connected via a cable;
    • inability to restore and update the firmware, and restore from a backup.
    READ  How to remove bookmarks on iPhone

    How to connect iPhone to computer via Wi-Fi

    For the convenience of connecting the iphone to the computer, you can use the Wi-Fi function, which is distributed by the router. This feature became available in October 2011. Prior to this, synchronization took place only using a USB cable. An important mandatory point is the connection of both the iPhone and the computer to the same Wi-Fi point. Otherwise, synchronization will not occur.

    You can see if there is a connection to the router of interest on your computer through Control Panel → Network and Internet → Network and Sharing Center. An active internet connection will be displayed in the corresponding section.

    In order to set up synchronization between the iphone and the computer via Wi-Fi, you need to connect from these devices to one Wi-Fi point.

    Then connect the iPhone to the computer using a USB cable (it is useful only for the initial setup).

    Open iTunes and go to the main overview page by clicking on the button at the top of the page.

    Here you will see information about your iPhone, you can create a backup to iCloud or to a computer, and also configure connection settings.

    To work with the iphone over Wi-Fi, find the Sync with this iPhone over Wi-Fi option and select the checkbox and click Apply.

    After setting up the functionality, the iPhone will automatically connect to iTunes and the use of a USB cable is no longer needed, but only in the case of using the same Wi-Fi network. This should also not be forgotten.

    How to connect iPhone to MacBook

    To connect your iPhone to your MacBook, you also need to install iTunes on your macbook. Here, too, synchronization options are possible via USB cable or Wi-Fi.

    If you set up automatic synchronization in iTunes, then all media data from the iphone will be uploaded to the macbook when it is connected. If you choose to sync the marked songs and videos, then the user will be able to independently select the files to download to the iPhone. Also, as in the case of synchronizing iphone and Windows, it is possible to create a backup copy of the smartphone and update it.

    An additional function of transferring data between iphone and macbook is the ability to transfer via airdrop. It allows you to transfer pictures and videos from your smartphone to your macbook by storing the files in the Downloads folder. To do this, you need to select one or more images on your iPhone, click send and select the AirDrop function. At the same time, AirDrop must be visible for all devices on the MacBook.

    How to connect iPhone to computer via USB cable

    A proprietary USB cable that comes with an iPhone of any model is used both for charging the iPhone and for pairing it with external devices.

    To connect your iPhone to your computer, take a USB cable, and connect one end to your smartphone to the Lightning connector, and the other to the USB output on your computer.

    If iTunes is not installed on the computer, then the offer to open the device will be automatically displayed, if the device autorun is enabled on the computer.

    At the same time, a proposal will appear on the iphone itself to allow or prohibit access to the files of the smartphone, but for this it is necessary to unlock the phone, otherwise the notification will not be displayed.

    If the iPhone user denies access to files, then the computer will see the phone’s connection, but the photo folder will become inaccessible.

    If you allow access to the iPhone without iTunes installed, you can only transfer photo and video files from the phone, but you cannot transfer images from the PC itself to the iPhone.

    To transfer audio, photo, and video files, you need to install iTunes. It can be found on the Internet and is free to download for Windows.

    When installing iTunes, a menu for selecting additional program functions will be displayed, you can choose or refuse them. You also need to specify the installation folder.

    After selecting all the functions, the installation of iTunes will begin.

    Upon completion of the installation of the program, it will open. If not the latest version of iTunes is installed, then it will notify the user about this and offer to download the new version.

    After installing the latest version of iTunes, the system will prompt you to restart the PC.

    To connect iphone to iTunes, connect the USB cable to your computer and launch iTunes. Here, too, you must allow access to both iTunes and iphone.

    Then iTunes will open with the iPhone connected, where the smartphone files will be on the left in the menu.

    iTunes is a special program developed by Apple that is designed to sync the contents of Apple devices. Therefore, for high-quality operation of an iphone or ipad, you need to install iTunes on your computer, since there is no other way to upload audio, photo, video files, films to the gadget. It is also worth remembering that iTunes has a set of standard drivers for the correct recognition of the iPhone by the computer.

    How to connect iPhone to computer or laptop?

    There are several options for connecting an iPhone. But in order to take full advantage of the possibilities of transferring data from a smartphone, creating a backup that will come in handy when replacing, losing or damaging an iPhone, it is best to install iTunes on your computer.

    If there is no aytyuns on the PC, then the iphone is recognized as a flash drive or memory card. In this case, only photo and video files can be copied. It is impossible to create a backup copy, add audio files to a smartphone. About possible options and subtleties, how to connect an iPhone to a computer

    What to do if iPhone won’t connect to PC or laptop via USB?

    Sometimes it happens that the iphone does not sync with the computer. Then you need to try the following steps:

    • Unlock your smartphone and confirm permission to access it.
    • Replace the USB cable, the reason may be a malfunction of its connectors.
    • Restart both devices. both the computer and the smartphone.
    • Disable antivirus on PC.
    • Reset Settings on iPhone.

    There is an option that this version of the operating system is not suitable for synchronizing iPhone and PC, or the necessary drivers may be missing, or the version of support for Apple devices is outdated.

    What to do if iTunes does not see the iphone?

    Check first if the USB cable is working properly. The problem may be in him.

    If you are convinced that everything is fine with the cable and iTunes does not see the iPhone, then the problem may be in outdated driver updates. Along with the iTunes program, the appropriate drivers are installed on the computer, thanks to which the system recognizes the connected iphone. Sometimes they may not update and iTunes will stop seeing the iPhone. Therefore, to update the drivers on the computer and eliminate the invisibility of the iphone, do the following:

    • Connect iPhone to Computer.
    • Go to computer properties by right-clicking on the Computer icon

    mouse. Then go to Device Manager.

    • In the window that opens, click on the USB Controllers item. When connected

    iPhone to the computer at this point the Apple Mobile Device USB Driver section will be available, right-click on it and select Update drivers.

    • Then click on the item Search for drivers on this computer.
    • To tell the system the location of the driver folder to work in iTunes,

    you must follow this path: Local drive C (where the system folders are stored) → Program Files → Common Files → Apple → Mobile Device Support → Drivers → Ok. And click Next. Then the system will update the necessary drivers, and iTunes should work. After the update, it is advisable to restart the PC.

    If you find an error, please select a piece of text and press CtrlEnter.

    How to connect iPhone to computer via USB?

    Apple devices have a closed architecture. many operations require the use of a PC. That is why, when buying an iPhone, the user should be ready to connect this gadget via a USB cable much more often than any of the Androids. The operation of connecting an iPhone via USB seems simple, however, there are some nuances that do not allow working with this device as with a standard data carrier.

    How to connect iPhone to computer via USB and why you need to do it?

    Connecting an “apple” gadget to a PC via USB allows you to:

      Synchronize iPhone with iTunes: download music and other multimedia data to the device memory, transfer notes and contacts, transfer credentials. Create backups of the information stored in the device’s memory and restore data from backups. Restore and update the operating system. Free up device memory (which is worth its weight in gold) by transferring data to your computer hard drive.

    All of this will not be possible if the USB connection between iPhone and PC becomes unstable. Correctly connecting your iPhone to your computer is pretty simple:

    Take a USB cable and insert the 30-Pin or Lightning connector into the corresponding connector on the gadget.

    Plug the connector on the other side into any of the USB ports on your computer or laptop.

    Wait for the sound typical of a USB device connection. At the same time, the iPhone will vibrate to notify the owner that it is charging.

    The message “Trust this computer?” Appears on the smartphone screen. Confirm by clicking the corresponding button.

    An AutoPlay window pops up on the computer monitor. this already indicates a successful USB connection.

    Go to “My Computer”. you will see your iPhone in the list of portable devices.

    Click on the icon and you will have access to photos and videos that were taken with the iPhone camera. You will not be able to get to music in this way. you will have to install and run a program called iTunes.

    READ  How to connect bluetooth headphones to TV

    USB connection: pros and cons

    Connecting with a USB cable isn’t the only way to connect iPhone to iTunes and PC in general. iPhone with iOS version older than 5.0 can be connected to a computer via Wi-Fi. However, most owners of Apple technology “the old fashioned way” continue to use cables, and here’s why:

      The cable connection guarantees high data transfer rates (for USB 3.0. 4.8 Gbps). When connecting via Wi-Fi, one has to look back at the restriction set by the Internet provider. The device connected by a cable to the PC is recharged, while when connected via Wi-Fi, on the contrary, energy is consumed at an impressive rate. Connecting via USB is a very simple procedure, but not everyone will be able to organize Connect “over the air”. Only when connected via a cable can you restore data from a backup and perform a full reset.

    Using USB ports to connect an iPhone also has disadvantages:

      The device is actually tied to the PC with a “string”. This limits the user’s options. to talk on the phone, he will have to interrupt “Connect”. The gadget takes up one of the USB ports. this can be a problem if there are only 2 ports on a laptop or laptop.

    Why iPhone won’t connect to computer: possible problems

    The solution to the problem of connecting an iPhone via USB very often lies on the surface. Such a situation is typical: the user connected the smartphone via a cable, waited for the iPhone to notify by vibration about charging. but then nothing happens! According to the given instructions, we see that the next step is to confirm the user’s trust in the computer. “Trust Request” does not appear on the screen of a locked iPhone. It is enough just to unlock the device. the message will appear and the problem will be solved.

      If you encounter errors accompanied by SyncServer and MobileDeviseHelper messages, check if the same time is set on the PC and the gadget. Even a slight difference in time can lead to a connection failure. If the “USB device is not recognized” error, plug the cable into a different USB port on your computer. The error can also be due to the fact that the SIM card in the iPhone does not meet the requirements of the device. For the connection to occur correctly, it is enough to activate the “Airplane mode” through the “Settings”. If the computer simply does not see the iPhone, the problem lies in the cable or in the connector on the gadget itself. In any of these two cases, the user will have to spend a lot. to buy a new “lace” or to diagnose the device with subsequent repair.

    USB cables for iPhone: what are there?

    The USB cable for any new or refurbished iPhone is included. if there is no cable, this means one of two things: either they are trying to sell you an unoriginal smartphone (in other words, a Chinese fake), or the cable was lost by slow salon consultants who used the gadget package for their own needs.

    There are two types of USB cable for iPhone:

    The first is Lightning. Connectors with 8 contacts appeared on the bundled USB cables and chargers along with the 5th modification of the iPhone. The 7th modification iPhones also use Lightning to connect headphones. A distinctive feature of Lighting is that you can insert the connector into the connector from either side.

    On the other side of the cable for the iPhone, there can now be not only a classic USB connector, but also a USB Type-C connector, which looks more like a micro-USB.

    Connecting an iPhone to a PC via USB is no more difficult than Android: in any case, difficulties are possible, but their occurrence is more an exception to the rule than a rule. Another thing is that by itself, connecting the iPhone via USB will not give the user ample opportunities. he will only be able to copy and delete photo and video files taken with the gadget’s camera, and for other operations he will have to master iTunes. Working with Android in this regard is much easier: when connected to a computer via USB, a smartphone with a “green robot” is defined as a flash drive.

    How to Play Music from iPhone to Computer?

    How to Listen to Apple Music on Windows or Mac Computer Using iTunes

    • Download and install the latest version of iTunes for Windows from this page.
    • Launch iTunes.
    • On Windows, click the Account icon and enter the Apple ID that you subscribe to Apple Music.
    • Click “Login”.

    How to sign in to your Apple ID account from a computer?

    Choose Apple menu  System Preferences. Click the “Login” button. Enter your Apple ID and password. If prompted, enter the six-digit verification code sent to your trusted device or phone number and complete the sign-in process.

    How to connect iPhone 11 Pro to computer?

    USB-C to Lightning Cable (iPhone 11 Pro and iPhone 11 Pro Max) Use this cable to connect your iPhone to a USB-C power adapter or to your computer. Lightning to USB cable (other models) Use this cable to connect your iPhone to a USB power adapter or to your computer.

    How to connect iPhone to computer and go online?

    How to use iPhone as a modem

    • Connect iPhone to Computer
    • Go to Control Panel. Network and Internet. View network status and tasks and make sure the connection is activated
    • If this connection is not displayed, restart your computer and reconnect your iPhone.

    How to sync iPhone with Windows computer?

    • Connect your device to your computer using a USB cable, then open iTunes and select your device.
    • Click Browse on the left side of the iTunes window.
    • Select “Sync with this [device] over Wi-Fi”.
    • Click the Apply button.

    How to transfer photos from iPhone to computer via USB?

    Now let’s go directly to iTunes. Click on the iTunes icon and in the window that opens, click the “Accept” button

    In the next window, click on the phone icon (in the upper left corner). you will see the data of your device

    What are the advantages of a wired connection??

    • – First and foremost is the speed of data exchange.
    • – Ability to install and uninstall applications
    • – Ability to charge the gadget
    • – Ability to restore the device
    • – Software update

    Of the minuses, I can only note that a USB port is required to connect (and on some brands of computers there are only two) and that your iPhone should be near the computer.

    Connecting iPhone to Computer via USB

    To connect your iPhone to your computer via USB, you need to download iTunes. The fact is that the delivery of the program contains the necessary drivers for connecting Apple devices, and, in addition, many necessary functions for them.

    So, go to and click on the “Download” button

    After you have downloaded the program, you need to install it on your computer. To do this, run the downloaded file. a window will open in which you will need to click the “Next” button

    The next window shows you where the program will be installed: click on the “Install” button

    After a few minutes, the installation will be completed successfully

    do not forget to uncheck the “Open iTunes” tab until you need to launch the program.

    Now it’s time to connect your iPhone to your computer via USB. To do this, connect one end of the USB cable to the USB input of your computer, and the other, respectively, to your iPhone.

    When connected, your iPhone will vibrate to indicate charging.

    The installation of the device driver will begin, upon completion of which the device autorun window will pop up on the monitor

    Then the connected device will appear in the “My Computer” tab as an additional icon

    By clicking on it, you will see that the internal memory of your device will open.

    You can only view photos and videos, however, you can listen to music only if you are connected via iTunes.

    How to connect iphone to computer via USB?

    To connect an iPhone to a computer via a USB port, you will need the gadget itself, the USB cable that comes with the device, and, of course, a computer. USB cables come in several modifications (depending on your iPhone model):

    It works with models such as iPhone 2G, iPhone 3G, iPhone 4G and iPhone 4S (iPad, iPad2, iPad3 and iPod Touch are also supported).

    iPhone 11 / 11 Pro Max: How to Transfer Files (Photos, Videos) to Computer w/ Cable

    The second option is the Lightning 8-pin connector:

    It fits more modern models such as iPhone 5, iPhone 5C, iPhone 5S, iPhone 6 and iPhone 6S (iPad Mini, iPod Touch 5G are also supported).

    There is also a USB Type-C cable. Unlike Lightning, it can be inserted either side, and it has a huge bandwidth. up to 10 Gb / s.

    The computer does not see the iPhone via USB but is charging: what to do?

    But what if you connected your iPhone via USB, charging is in progress, but the computer still could not detect your iPhone? Let’s look at some methods to solve this problem.

    • – First you need to reboot both devices in order to make sure that neither of them freezes.
    • – The next step is to check all USB ports: they may not work due to broken contacts. To check, take any USB flash drive and check each USB port one by one.
    • – Disable third-party software (antiviruses, firewalls etc.), do not forget to include them after checking.
    • – Also unlock your phone, perhaps there will be an inscription “Trust this computer?”

    Without an affirmative answer, no synchronization will take place, only charging.

    • – Try changing the USB cable. it may be out of order. Sometimes, even without visible damage, the cable is inoperative.
    • – Try resetting your phone (don’t forget about backups)
    • – You can also clean the USB connector of the cable. it may be dirty.
    • – Check if the time is set correctly both on the computer and on your phone (even a small discrepancy will lead to the computer not recognizing the iPhone via USB)

    If more than one method did not help you, then most likely you have a broken charging connector, and you should change it at a service center.