How to connect headphones to your Samsung Galaxy phone

Why headphones won’t connect to Samsung

The reasons why you cannot connect wireless headphones to your Samsung phone are shown in the table:

Malfunctions Possible solutions
Bluetooth accessories are visible in the list of available connections, but not pairing Samsung headphones are most likely connected to a different device. It is necessary to untie them from the previous device
Gadgets like Galaxy Buds are not visible in the list of available devices There may be several reasons:

Usually, it is not possible to correctly connect Bluetooth headphones to the phone for those users who have previously connected several more wireless devices to the smartphone.

The Level Active headset is waterproof, equipped with P2i nano-coating, which completely covers the inner surface of the headphones, allowing you to actively train, spend time in nature without worrying about moisture penetration into the accessories.

How to Connect Wireless & Wired Headphones to Samsung Phone

Modern devices make it possible to listen to your favorite audio files or other audio information at a distance, without using a cable. Connecting your headphones to your Samsung phone correctly can help you get the most out of your gadgets.

Bluetooth pairing of headphones and phone

To connect headphones, it is recommended to do the following:

  • Turn on Bluetooth on your mobile device. Hold the corresponding icon for a long time to launch the settings menu. Activate the switch near the “Disabled” sub-item.
  • Includes Bluetooth to discover paired devices.
  • In order to avoid the formation of compatibility in automatic mode, select the section “Parameters for increasing accuracy”.
  • Turn off the wireless headset, put the headphones in “visible” mode.
  • Press the search button, wait for the desired device to appear in the list, click on it for compatibility.
  • If everything is done correctly, information will be displayed that the headphones are active, they can be used.

connect, headphones, samsung, galaxy

Connect via button

You can connect headphones to your Samsung phone using the button. On most gadgets, it is alone, located on the case, is responsible not only for turning on the headphones, but also shows the connection status, the remaining battery charge, and monitors the current mode.

To monitor the state of the headphones, the operation of touch sensors is provided. Various signals indicate the status of the headphones. Double-tapping and holding the sensor means switching to manual pairing mode of the headphones with the phone via Bluetoth. Learn more about setting up Samsung Galaxy Buds.

To synchronize to a smartphone, the following algorithm is followed:

  • Hold the power button for a few seconds.
  • Select Bluetooth in the setup menu.
  • The search technology is launched, after which the existing and previously paired devices (list) will appear.
  • In the list that appears, find the Buds or Pods configuration, then tap on one of them.
  • To disconnect, press the indicated keys again or select the Bluetooth deactivation option.

Connection error, how to fix

It is not always possible to connect headphones through the Settings menu, which may be due to additional subscribers or gadgets connected to a single channel. At the same time, user pairing occurs with errors or delays, which is fraught with the complexity of information identification by the standard system.

To understand how to do this in such situations, you need to pay attention to third-party programs. Utilities such as Scanner or Pair will help organize connections and unload the smartphone OS. If there are problems with the synchronization of the left and right segments, it is recommended to put the Bluetooth headphones in the case and wait for deactivation. After that, the devices are taken out of the box, the turn-on procedure is repeated.

Instructions for getting a normal wireless headset connection with resetting the connection settings:

  • Insert both elements into the slot for charging, take out back after a few seconds.
  • Fix the power key for a few seconds.
  • After resetting the connection, insert the headphones, wait for the sound notification of the connection.

Setting up wired headphones

Wired Samsung has a teardrop shape or is made in a vacuum design. The main purpose of such devices is to listen to music by connecting to a phone, laptop or PC via a mini jack 3.5 mm or micro USB.

There are two ways to set up wired headphones:

  • Via microUSB connector. This method is relevant for most operations. Including microphone or headphone setting. You need to connect to a PC or smartphone, select the sound menu, adjust the noise, bass, volume at your discretion, not forgetting to save the adjustments.
  • A familiar mini-jack with a 3.5 mm jack. The most common type of connector for wired connections. Through it, not only any wired headphones are connected, but also different types of speakers.

Samsung is positioning the headset for a smartphone as a sports accessory that does not cause discomfort, has a long battery life (at least 4-5 hours), is safe and reliable. Indeed, the original Samsung wireless earbuds live up to all expectations. In addition, the user can listen to test messages, monitor the workout using the smart Samsung SHealth app.

READ  How to connect Xiaomi TV to the Internet

With the constant use of a wireless headset and other headphones, you need to remember that prolonged listening to audio files at high volume is fraught with negative reflections on the hearing organs and the correct operation of the devices used.

How to connect wireless earbuds to your Samsung phone?

Actually, the site already has an article on how to connect wireless Bluetooth headphones to an Android smartphone. However, in that article, a Huawei smartphone was used as the device. In Samsung and One UI firmware, the interface is slightly different, so we will devote a separate article to it.

What do you need? The headphones themselves, and the Samsung smartphone. At first, it will be more convenient to turn on the headphones, for which find the power button on them. In our case, Honor headphones are used, the power button on which looks like this:

Press and hold. For our example, the following is relevant: when you press and hold the button for a few seconds, the red and blue LEDs start blinking alternately. the headphones are available for search.

Turn on Bluetooth and see available devices for pairing. The headphones are called AM61. We tap on their name.

Now is the time to test the performance of the headphones. To do this, open the application for playing music. We use AIMP player.

Music played over the headphones. Fine, everything works.

The devices will be automatically paired and the headphones are ready to use. The Quick Access Toolbar displays a message about the connected device:

In general, there should be no connection problems.

Friends! If our site helped you or you just liked it, you can help us develop and move on. To do this, you can:

  • Subscribe to our YouTube channel.
  • Subscribe to our group.

How to connect wireless headphones to your phone

Bluetooth technology allows you to connect devices without cables. It’s comfortable. Now the wires are not needed, they will not break, get tangled under your feet, in your and backpack. In this article, we will show you how to connect wireless headphones to your phone.

It doesn’t matter which devices you are trying to communicate with. The manufacturers have tried to make their pairing as simple as possible. As an example, let’s take a look at how to connect Bluetooth headphones to a Samsung Android phone.

First turn on the headphones, a beep will sound and the indicator will light up, indicating that they are ready for use. Set them aside nearby.

The first way. Swipe down from the top of the phone screen. A curtain with shortcuts will open. Click on Bluetooth. Device search starts.

Found devices are displayed. Choose your headphones. Then a connection is established, in our case for audio playback, calls and multimedia. Click “Finish”.

Second way. Go to the phone menu and go to “Settings”. Open the “Connections” section.

Turn on Bluetooth and then tap on its label with your finger. Device search starts.

There are headphones, click on them. Further it will be said that they are connected. Done.

Connecting headphones to another phone

If the headphones are already paired with some equipment, then it will not be possible to connect to them from another phone until the current connection is disconnected. To do this, go to the connection settings on the active smartphone and click “Break connection”.

Also, as an option, you can turn off Bluetooth on the signal source, or turn off the power of the headphones and turn them back on again. In this case, the initial connection will be terminated and it will be possible to connect to them from another phone.

Why the phone does not see the headphones via Bluetooth?

If your Bluetooth headphones are not in the list of found devices, try pairing with them again. If that doesn’t work, turn them off and on again.

Still unable to connect? Try disabling Bluetooth and reactivating it again.

Keep the headphones in line of sight as close to the phone as possible, especially if you are syncing them for the first time.

Other wireless equipment may interfere, move away from it and reconnect.

How to connect Wireless Bluetooth headphones to Samsung Phone

If the headphones work with another smartphone, you will not be able to pair it with the new phone until you disconnect the active connection.

Check the battery power, the headphones may be out of power.


The process of connecting wireless headphones is a little more complicated. Today, there are several ways to connect them to a smartphone. The distance between devices should not be more than 10 m. Premium models assume support at a distance of 100 m. The basic pairing method can be found in the manuals for the headphones themselves and the phone:

  • Before connecting the headphones, you need to activate them.
  • After the headphones are turned on, you need to go to the Bluetooth section through the Smartphone Settings Menu. Most often, it turns out to be among the first from the general list of settings.
  • After selecting the line “Bluetooth”, you need to move the slider to the “on” position
  • Next, a window appears on the smartphone screen with a search for new devices
  • In the list that appears, you need to find the name of the headset
  • To pair, you will need to enter a code. Most often it is 0000.

If a bluetooth headset is used only for talking on the phone, it will be impossible to listen to music through it. However, the developers of the Android operating system have managed to find a way out of such situations. They have created a special “Bluetooth Router” application that is available to all users on the PlayMarket platform. After downloading this utility, you need to connect Bluetooth on the audio headset and smartphone, then follow the standard pairing procedure and only then run the program to install the router.

READ  How To Connect A Set-Top Box To A TV Through Tulips


The process of connecting wired headphones to your phone is very simple. First of all, you need to inspect your smartphone.

Most often, the headphone connection is located next to the charging jack.

Today there are 2 options for connecting a wired headset:

  • Micro USB. This connection method is used for many operations with the phone, such as charging or transferring data. It is also suitable for connecting headphones.
  • Mini jack with a standard size of 3.5 mm. This type of connector is the most popular. Through it, you can connect not only a headset, but also stereo equipment, namely front, stationary and portable speakers.

To make the wireless headset active, it is enough to connect its plug to the corresponding jack. The smartphone instantly detects the connection of a new device and starts transmitting sound only to the headphones.

connect more than one speaker for more sound

If you have two speakers that you want to connect to your Galaxy device and further enhance the audio output in your home, you need to enable the Dual Audio setting in your phone to connect to another speaker or headphones. Note that Dual Audio requires a Galaxy model that supports Bluetooth 5 or higher, which means you’ll need a Galaxy S8, Galaxy Note 8 or newer.

To give it a try, go to the Bluetooth menu in settings, then hit the three-dot menu button and select Dual Sound. Now click on the switch at the top of the Dual Audio page to enable this feature. If you have Multimedia Volume Sync enabled. you will be prompted to disable this feature for dual pairing to work, so tap Disable to disable it. You can then connect a second headset or speaker to your Galaxy.

It’s worth noting that audio output for two Bluetooth devices may not play perfectly in sync, depending on their Bluetooth versions. For example, one speaker may lag slightly behind another if one speaker is connected to Bluetooth 4.1 and the other. to 5. This slight discrepancy may not matter much if the speakers are located in different rooms. However, it still deserves attention.

Set media volume sync

Synchronization of media volume. it’s a little ingenious tweak that comes with your Galaxy device that allows you to adjust the volume of your Bluetooth speaker or headphones directly from your phone and vice versa. This not only ensures that your paired devices stay on the same page in regards to audio output, but also gives you additional the ability to use one device to control the volume when it is out of reach.

If not enabled, the volume buttons on the headphones will increase or decrease the volume of the headphones. but the volume at the bluetooth output of your phone will remain the same. This is especially annoying when the volume on your phone is set to low because the headphone volume will never get high enough unless you also turn up the volume on your phone.

To enable this feature, open the quick settings menu on your Galaxy phone and press and hold the Bluetooth icon to go to the settings page. Now click on the three-dot menu button and select “Sync Media Volume” from the pop-up window. From there, just click the switch at the top of the page to enable this feature.

Please note that your Bluetooth speaker or headphones must also support media volume sync for this feature to work. It is very easy to check this. click on the switch as highlighted above and if your headphones are not compatible, the switch will automatically turn off and inform you via a prompt.

How to connect Galaxy Buds to a computer, iPhone, or other non-Galaxy device

Samsung’s new Galaxy Buds are very easy to pair with your Galaxy phone. You open the case next to your Bluetooth-enabled phone and a pop-up appears on the screen asking you to connect.

But what if you want to connect them to, say, a computer? Or is your phone not a Galaxy? Well, this is a little less intuitive, but not that hard.

Since I tried to figure this out myself and realized that Samsung doesn’t have instructions on how to do this anywhere on their site, I thought I’d write this down for anyone looking for how to connect Galaxy Buds to their device.

5 Ways to Improve Bluetooth Performance on Your Samsung Galaxy «Android :: Gadgets Hacks

Many of us rely on our smartphones for all of our media needs. Now, more than ever, we use Bluetooth connections to play sound through speakers, headphones, car audio systems. the list goes on. If you have a Samsung smartphone like the Galaxy S9, there are a number of Bluetooth settings and hidden tricks that can improve sound quality.

Most of these Bluetooth enhancements are not enabled by default, so you’ll have to go into your phone’s settings to enable these features. Fortunately, settings are relatively easy to access for the most part. Below, we’ll highlight the best ones to help you get the most out of your Galaxy’s Bluetooth functionality.

Instructions for connecting headphones

Modern headphones for smartphones are a specialized audio headset through which you can not only listen to music, but also receive incoming calls. Built-in microphone, despite its miniature size, clearly transmits sound information.

Modern headsets for phones are classified according to their technical characteristics. But first of all, the connection method is considered:

  • Wired headphones. They are connected to the phone via a mini jack with a diameter of 3.5 mm.
  • Wireless headphones. A headset of this kind connects to a smartphone via Bluetooth technology.

Also, headphones are divided by form factor. Wireless models lock on one ear.

Wired devices have a standard droplet or vacuum headphone shape. The model is not very common in society, as it requires a lot of battery power. Most often they are used to connect to a PC, laptop or TV. But this does not mean that they cannot be used to connect to a smartphone. over, the Android OS assumes the use of a headset of different designs.

READ  Application stopped Android what to do Samsung

In general, connecting a headset to a phone is not difficult. Each individual headphone model comes with instructions. Wired models just need to be connected via a mini jack to a special connector on a smartphone. But to connect wireless headphones, you need to establish a Bluetooth connection.

Listening to music

Before using the Galaxy Buds, you need to set up your headphones. This is done by synchronizing with a mobile device. To do this, you need to activate the music player and wait for the start of playback.

Playlist, volume, equalizer and other options are controlled via a voice command or signals sent through the headphone touchscreen display (“Control” item).


Before using the Samsung Galaxy Buds headphones, you need to launch the application, after which access to the main interface opens.

Samsung Buds sensor lock is performed:

Before connecting the preset touch and hold function, you need to:

  • Open Galaxy Wearable.
  • Select “Touch Panel”.
  • Select “Right” or “Left” earphone.
  • Set a function to be bound to an action.
  • Voice control via Bixby.
  • Quick ambient sound (background sound mode).
  • Volume control.
  • Voice memo (recording voice memos).

Bixby control

According to the manufacturer’s note in the instructions for the Samsung Buds headphones, the Bixby voice assistant is only available when a mobile device with similar support is connected.

  • Touch and hold the sensor.
  • Say a voice command and lift your finger from the panel.
  • If the command is recognized, the original Galaxy Buds will execute it. If this does not happen, press the sensor and repeat the command clearly.

Preparation for use

You may need to recharge before plugging in the headphones for the first time. To do this, you need to place them in a battery case and monitor the status of the indicators (item “Indicator light designation”).

Advice! Do not use the Samsung Galaxy Buds Wireless Headphones while driving or on pedestrian crossings. This can lead to a decrease in reactions and accidents.


Potential problems with the Samsung Buds earbuds that you can fix yourself.

Reply or reject incoming

  • An incoming call is alerted with a sound signal and a duplicate voice notification with the caller’s number.
  • The answer is by double tapping the sensor.
  • Deflection. by touching and holding for a few seconds.

Characteristics and appearance

The headphones are equipped with built-in rechargeable batteries. “Sits well” in the ears, do not create discomfort as a result of prolonged wear. Sound quality is ensured by 2-way speakers reproducing premium sound from AKG.

Samsung Buds at a glance:

  • USB charging cable.
  • Set of replaceable temples and ear pads.
  • Battery case for charging and storage.

Available in four colors: white, blue, red and black.

Connecting Galaxy Buds

Samsung branded headphones can be connected either as described above or through the special Galaxy Wearable software. Some smartphones have it installed by default, but you can download it from Google Play Store or Galaxy Store.

    Launch the application, select a suitable device from the list

and provide Galaxy Wearable with the required permissions

On the next screen, click “Continue” and give additional permissions. access to the calendar, SMS, etc.

Galaxy Buds can report notifications that come to the device, as well as read their contents. If you are interested in such a function, first we allow them to read the alerts, and then provide access to them on the smartphone.

We read the brief instructions for using the headphones and tap “Got it”. The device is ready for use.

Unlike a standard connection, the Galaxy Wearable app gives you more options to customize your buds.

Headphone connection

You can connect any wireless headphones to a Samsung smartphone using Bluetooth technology.

    We turn on the pairing mode on the headphones. As a rule, there is a special button for this on the case.

On a Samsung device, open “Settings”, then “Connections”, tap “Bluetooth”,

When the headphones are displayed in the “Available devices” block, click on them and confirm the connection request.

After pairing, we find them among the connected devices, tap the gear on the right and, at our discretion, enable the parameters of their use.

Solving connection problems

If you encounter problems during the connection process, please follow the recommendations posted on the Samsung support page.

    Make sure the headphones are charged. The charge level can be displayed in different colors by a special indicator. Check this information in the instruction manual. If there is no indicator, just connect the device directly to the mains for 20-30 minutes, as they will charge more slowly through a computer or laptop. Insert Galaxy Buds correctly into the slots of the charging case and connect to the charger.

Check Bluetooth connection. There should be no more than 10 meters between devices. If the headphones are not listed among the available devices, turn them off and back on again to re-pair. Return the Buds to the charging case, close it and reopen it. Restart the “Bluetooth” function on the Samsung smartphone.

Check for software updates on your Samsung Smartphone. Read more about this in a separate article on our website.

To update the Buds headphones, launch the application, scroll down the screen with the settings and tap “Headphone software update”.

If the suggested solutions do not help, contact the service center or write to the Support of the device manufacturer for additional assistance.