How to connect DVD to Samsung TV

Component cable connection

The component cord contains five plugs that you must connect to your DVD player. You need to be guided by the color coding and Output labels. The audio ports are red and white, and the video is another red, green and blue. In order not to get confused in the red “tulips”, lay them out on the table and make sure they are in the correct position: green, blue, red for a video picture and white, red. for audio accompaniment.

connect, samsung

Sometimes component cables are only three-colored. green, blue and red. and are intended for the transmission of video content. Therefore, using such a cord, you will have to use an additional red and white cable to transmit sound.

The other end of the cable is connected to the outputs of the corresponding color and the inscriptions Input on the TV. Before turning on, make sure that all plugs are firmly seated in the connectors. Turn on the TV using the required datsource.

Ways to connect DVD to TV

If you have no idea how to connect a DVD yourself, then you do not need to immediately call the wizard. To enjoy your favorite videos and TV shows, you need to get connected properly. Before connecting the dvd to the TV, it is necessary to read the instructions and check which ports on the TV are available.

How to Connect a DVD/VCR Player to your TV

Among the popular connection methods, the following are known:

  • using HDMI cable;
  • using an RCA cord;
  • Scart connection;
  • method using S – video ports.

HDMI connection

The HDMI port is considered optimal when connecting a dvd player to a TV, because it provides the ability to transfer video to the screen without loss in quality. Outwardly, it is somewhat similar to a USB connector, but only thinner and longer. Experts say that in this way it is best to connect the divide-player to the plasma. It is desirable to use cable models 2.0 and higher, which are marked “High speed with Ethernet” and only from leading manufacturers. If you have no idea how to connect correctly, then check the inscriptions on the connectors.

Available connectors

Before connecting a DVD player, you need to familiarize yourself with the ports on your TV. As a rule, manufacturers equip equipment with the maximum number of connectors to make it easier for the user to connect various devices. The most popular are HDMI and Tulips. But also Scart and S-video ports are used.

Scart connection

A not very popular method of connecting a DVD to a plasma TV is to use the Scrat connector. The transmission of sound and images is carried out in the same quality as when using HDMI. But the problem is that this port is quite rare on modern devices. To connect the player and TV, you will need to purchase a special Scrat-RCA cord, where one end is inserted into the player, and the other (where the tulips are) into the TV.

4 Ways to Connect DVD to TV

DVD players are quite common because they can significantly expand the world of entertainment. Their cost is low, so everyone can buy such a device. There are many ways to connect a DVD player to a TV, and all have their own characteristics, but are not complicated. After setup, you can watch movies as many times as you like and countless times.

Connecting using RCA

The so-called tulips have for many years been considered the most popular method of connecting any television / video device. The RCA connector has three colors: red and white for audio playback, and yellow for video. Such connectors can be either on one side of the wire or on both sides. In order not to make a mistake and correctly connect the dividend to the TV, it is necessary to combine the plugs with connectors of the same color.

Possible problems and solutions

If during testing it was revealed that there is no sound, and only a video picture is displayed, this means that the cable is not connected correctly. Check that all color marks match. To connect the DVD to the Samsung TV, you need to use a cable, and connect the player itself to the outlet. After turning on the TV-panel, select exactly the mode to which you connected the DVD.

If the TV does not see the DVD, then replace the cables. Over time, the cord could be damaged, and the connectors lose their tightness. High humidity could affect the connector. When buying, try to choose a well-known manufacturer to be sure of the quality of the wire. After connection, the cable itself should not be stretched, but it is desirable that it sag a little. Pulling too tight may distort the image.

Just plug and play for video consoles

When you’ve gotten the latest game console or new media player, you’re in for the fun right away. Well, QLED TV is about to change your life. Here’s how to connect your DVD player to your TV (or Blu-ray!) Connect its HDMI cable to the One Connect Box. This is it. Or, if you’re wondering how to connect your gaming devices to your TV, it’s the same thing. Plug in the One Connect Box and get ready to win. It’s that simple!

Arrow. You are connected. What now?

QLED TV not only makes it easy to connect with Invisible Connection and One Connect Box, it also features auto-sensing, which means whatever you plug in will automatically appear on your TV screen. No more guessing or looping through every HDMI port to find what you are looking for. Just select it from the menu, because QLED TV tells you what’s where. Not to mention, Invisible Connection only allows one Samsung Smart Remote to control each device. that’s why we call it One Remote Control. ‖ No more button presses and no more reaction, because this is the wrong remote. QLED TV makes it easy to set up your TV and jump straight to your entertainment.!

Topics: QLED TV, 2017 Samsung TV, How to connect phone to TV, how to connect Xbox to TV, how to connect laptop to TV, how to connect DVD player to TV, Samsung Smart Remote, Samsung TV one connect box

Samsung TV blog. QLED TV | Frame | Premium UHD TV

Adapters for connecting a DVD player to a TV

Sometimes there is a situation where LCD TV and DVD do not have the same connectors. In this case, to connect the DVD player to the TV, you will have to use the appropriate adapters.

List of common types:

  • SCART-RCA. In this case, only one adapter can be used, since each plug transmits not only an image, but also sound at once. This is the preferred option as there will be no cable tangle and the picture and sound quality will be good.
  • SCART. S-Video 2RCA. The S-Video cable cannot separately carry the audio signal, so an additional 2RCA cable must be installed.
  • HDMI-RCA. If you use such an adapter, the signal quality will noticeably deteriorate, despite the fact that an HDMI cable will come from the DVD player.

The process is simple, but it is important to know the nuances of how to connect a DVD to a TV using an adapter.

How to connect DVD to Samsung Smart TV

Component cable

The component type of wire consists of 5 plugs. For the correct connection, you need to use each of them. On the panels of the DVD device and TV, you need to find the Output label, as well as the corresponding port in different colors.

READ  How to enable developer mode on Samsung

The white and red jacks are used to carry the audio signal and are often separate from the rest. Blue, green and red are for video signal. Make sure all 5 plugs are connected.

When using component wire, you can get confused because there are two tulips of the same color. red. To deal with this, you need to put the wire on the table, and count them in a specific order: green, blue, red (video signal), white, red (audio signal).

Some wires may only have green, red and blue plugs. In this case, you will have to purchase an additional red and white cable to transmit the audio signal.
To make sure that Dividi is connected correctly, you need to press the “Source” button through the menu and turn on the corresponding video channel on the TV.

The picture must be transferred to the screen. If it is difficult to determine which signal source is connected to the TV, you need to alternately click on each item in the list with the DVD turned on.

If an image appears, then this is a new connection. If the TV monitor only receives video or audio separately, then the connection was wrong. It may also be that the signal does not go to the device at all.

In such a situation, you need to use several options for solving problems:

  • In the absence of a video signal, red, green and blue plugs should be inserted into the corresponding inputs of the same color to the “Input” connector on the TV and “Output” on the DVD player.
  • If the sound does not turn on, then the white and red wires should be connected to the jacks of the same color of the “Input” connector on the TV and “Output” on the set-top box.
  • Check that the two red wires are not reversed. Many users face this difficulty and this is the most common way to effectively solve the problem.

If you encounter other problems, you should do the following:

Access multimedia content on your PC from your Smart TV

Then launch the AllShare Play app. In the app window, select the Videos category. Photos or Music. depending on the type of content you want to access from your PC:

Connecting Computer to Samsung Smart TV

Last updated on July 21, 2020 12:58 PM. David Webb.

This article explains how to connect your computer to your Samsung Smart TV. This will allow you to mirror any media stored on your computer. Samsung Smart TV is DLNA compliant. therefore, you should configure your computer to act as a DLNA server. To complete the connection, all you need is the All Share app. which is set by default on your TV and also a good WI-FI connection.

How to connect DVD to Samsung Smart TV

At times, the TV has only one antenna input. nothing more. Applies to portable models, old, Soviet production. Why does the TV need to connect a DVD player? Savings: avoid paying for new equipment. Plasma panels are not cheap. Whether it is worth spoiling your eyes with a cathode ray tube, decide for yourself. Let’s discuss how to connect DVD to TV. Along the way, we will reveal the reason for unsuccessful catching of the image directly. Technique goes ahead. let’s follow on the heels.

Important recommendations

Before connecting DVD and TV, there are a few important requirements to consider:

  • Do not stack appliances one on top of the other. First of all, this is dangerous due to heating, because without proper cooling, devices can fail. Close contact can also lead to a chain reaction after one of the devices breaks down.
  • Choose the correct HDMI cable. Visually, all the wires are almost the same, but not everyone is suitable for transferring a high-definition Full HD picture to a TV. If you do not need the perfect image, then you can take any cable.
  • Don’t put your technique too far away. We are talking about those cases when the length of the cables does not allow doing this without pulling them on. It is important that the wires are free so as not to create problems with the signal and the risk of damage to them.

Why can’t I connect the antenna input of the TV and RCA

Physicists introduced the concept of bandwidth. Analyzing the signal, you come across a term. Cable, ether, atmosphere of the Earth, cascades of electronic devices. It turns out that the low frequencies of the image and sound are not spread by the air for a long time. they fade out quickly. The engineers quickly came up with a method to correct the problem. Found frequencies that successfully pass the invisible ether, environment. First of all, the cable. The frequency has been found, how can I put useful information? Modulators are used. One parameter of the carrier frequency changes following the law of information.

A carrier is called a harmonic (sinusoidal) oscillation, the frequency of which is much higher than the Spectra of the transmitted information. Musicians consider the notes of 20 kHz to be the highest, carry information, overcoming the ether, the cable has a frequency of at least 150 kHz (middle of the DV range).

If the carrier parameters are changed with a low-frequency signal, the spectrum becomes symmetrical with respect to the carrier harmonic. We remember what was said: the engineers found that the wave easily passes the cable, air. Tracked the throughput of the ether (more precisely, the atmosphere), some waves pass better, others worse. The process cannot be modulated by adjusting the parameters to the needs of the task being performed. The technological development of humanity is too low.

The satellite dish converter uses the above conversion scheme. High frequencies are lowered, transmitted by cable, decrypted by a TV, set-top box. The main thing for readers to understand: not from a good life, information transmitted by air, cable, spreads the carrier frequency.

The receiving side carries out the reverse process of removing information from the carrier. The signal received by the antenna, cable gland is amplified. The task is performed by the high-frequency path. The length of the connecting cable is one and a half meters (typical DVD player), there will be no strong attenuation, losses are determined by the length of the medium. The need to introduce a carrier disappears, the DVD-player transmits information to the TV in the form of reproduced by the speakers, the screen. The technical solution will make it possible to isolate the modulator, demodulator path from the device design.

We got the so-called “tulip” (RCA), which occupies a dominant position in video equipment:

  • Yellow channel transmits image signal without carrier.
  • White channel transmits mono sound, left speaker signal.
  • The red channel carries sound from the right speaker in stereo mode.

There is an analog signal, do not try to connect the DVD player to a computer monitor. The display is a purely digital device. Accordingly, the signal structure does not in the least resemble RCA. The industry has come out with a bunch of adapters, adapters that do the conversion. Readers now understand the specifics of direct DVD to TV connection. Antenna input high frequency, will try to find the missing carrier. Channel 1. 12 bandwidth, will not see DVD player signal.

READ  How to enable 4K on a Samsung TV

Connection methods

Despite the fact that many modern TVs can directly connect to the Internet via Wi-Fi, playing video files via DVD is still very common entertainment. The scheme of its connection to the TV display is not the same. The peculiarity of connecting hardware elements is associated with different connectors, their configuration and number. Depending on the outputs for the wires, their comparability in technology, the most optimal method is selected, in which high-quality signal reproduction can be ensured. So, let’s look at the methods to connect a dvd player.

  • One such method is using an A / V cable. It is a cord with three ends of different colors, which are each inserted into a specific socket on DVD and TV with the same color. The red and white plug is responsible for the transmission of the audio signal, the yellow one for the video transmission. This connector is also called “tulip”, and the method of connecting it is the most common.
  • Using an HDMI cable capable of transmitting high quality video, audio signals. This connector is very similar to USB, but it is much thinner and has a longer cord, which provides more options for placing equipment. This method of connecting a DVD to a TV is the most modern.
  • Digital equipment can be connected via SCART wire. This is the easiest way to connect. The cable has single lugs with contacts in two rows. On one side, the connector is marked with a down arrow, which means signal reception, on the other, an outward arrow, which means outgoing signal. SCART collects less interference than any other type of wire.
  • Composite connection allows you to get a better signal than A / V cable, but worse than HDMI connection. The DVD player transmits the video signal through the S-video output, and the sound through the tulip connection. How to connect a DVD to play video in this way? It is necessary to make a cable connection, consisting of five connectors: green, blue, red is responsible for video, the rest is for audio.

Adapters for connecting a DVD player to a TV

  • You need to pay for additional equipment (adapter).
  • The store is far away, I want to watch a movie now.

For distressed enthusiasts, other enthusiasts suggest:

  • Homes are lying around not thrown out attachments of the 90s. Remember Sega, Dendy, other boxes where the game cartridge was inserted.
  • Each set-top box contains an RF (RF) block that converts the signal for feeding the antenna input of the TV.
  • The unit is equipped with at least two tulip compound output connectors (3RCA).
  • Amateurs noticed: if you apply a signal to the 3RCA input (yellow, white channel), the antenna output gives a good image.

How the switching is carried out inside remains a mystery. It doesn’t matter why the circuit oscillates from one output to the other. We remove the HF (RF) block from the set-top box, if necessary, short-circuit the contacts of the shutdown button with a jumper (if there is one). Then we examine. Sometimes, not all outputs are connected to the circuit. We put jumpers. Individual outputs are shunted by resistors, you can short-circuit by removing the resistance altogether.

It remains to supply power to the circuit. Traditionally they use 8. 12 volts (measure with a Chinese tester). The phone adapter will not fit, from a set-top box, walkie-talkie, please! If there is a 7805 stabilizer chip, see if it is taking power from it. In this case, connect the telephone adapter to output 7805. There will be no difference. The 7805 regulator simply converts 12 to 5 volts. A similar treble unit contains a VCR. Find input information, try to adapt the device to your needs.

Device collaboration rules

The connected DVD player should be in close proximity to the TV, but do not put equipment on top of each other in order to prevent overheating. If the wire that is included in the kit cannot be connected to the screen due to the mismatch of the connectors, you can take a photo of the output of digital devices to purchase a suitable tool for connecting them.

It can be adapters or a new cable.

To connect Dividi to a Samsung TV, you can use both an HDMI cable and an RCA wire, it all depends on the novelty of the technology model. For modern plasma or LED TVs, modern cables are used that transmit the highest quality picture and sound. Older models, even a brand like Samsung, can use the usual tulips.

It is convenient to launch a DVD with a TV using a remote control. For these purposes, on 2 remotes, you must press Video or TV / AV. After the static menu appears, select the required action in the player and start playback. If you want to be able to control both devices from one remote control. purchase and configure a universal remote control.

You need good sound to watch DVD movies with quality. If your TV does not have very powerful speakers, then this issue is completely solved by connecting various speaker systems. In particular, the soundbar for the TV will be an excellent choice: this compact device will significantly expand the sound possibilities and allow you to completely immerse yourself in the atmosphere of your favorite films.

For various reasons, the user may need information on how to connect a DVD to a TV with his own hands. Some movie aficionados prefer to assemble a collection of movies on physical media and watch them through players. Others simply cannot do without a player due to the lack of functionality of their TV. This is mainly true for old TV models with a cathode ray tube or budget solutions, where the only USB connector is broken. Buying a new device in such conditions can be more expensive than buying a player, and the quality of video played via DVD can be higher than digital copies on flash drives.

Connecting DVD player to TV via SCART connector

The gifted are encouraged to understand the layout of the SCART connectors. A universal bus where almost everything is available. Dig out the collapsible SCART plug, the corresponding connector on the TV, forget the problems. Experienced radio amateurs disassemble the layout, re-solder it, use it. The picture of the SCART connector is shown below, we also bring it up: the yellow RCA connector is called composite video. See which terminals transmit sound, picture:

  • Picture:
  • Input: yellow tulip plug.
  • Output: terminal 18 SCART. ground of the incoming video stream, terminal 20 SCART. signal of the incoming video stream.
  • Sound:
  • Left column. Input: white tulip plug. Output: terminal 6 SCART. left speaker input.
  • Right column. Input: red tulip plug. Output: terminal 2 SCART. right speaker input.

Sound ground common for both channels, located on the SCART terminal 4. The illustration indicates the color of the component connector. The pins are marked in red, green and blue. We will consider the option later. Be aware that the difference between a “tulip” and a SCART is only in the layout. It is possible to connect the pins with wires without any adapter. Finally, many are probably interested in the question of where to get land on RCA? We assume the outer braid (screen). Measure with a tester just in case. If it calls with the DVD player circuitry ground, it is itself. However, there are simply no other options.

READ  How to connect your phone to your iPhone 8 TV

If someone else does not understand, the cable for connecting the DVD to the TV needs to be soldered by hand. To do this, you need to find a collapsible SCART connector, 3 RCA plugs for “tulip”. Many DVD players, especially indigenous Chinese ones, have a component video output. Differs from composite in higher quality. There are 5 plugs in this case, three of which carry video. Difference signals are transmitted between color levels. High quality comes from redundancy.

  • Picture:
  • Input: YPbPr red plug.
  • Output: terminal 15 SCART. difference between red and brightness Pr, terminal 13. ground Pr.
  • Input: YPbPr blue male plug.
  • Output: terminal 7 SCART. difference of blue and brightness Pb, terminal 5. ground Pb.
  • Input: YPbPr green plug.
  • Output: terminal 11 SCART. display brightness Y, terminal 5. ground Y.
  • Sound:
  • Left column. Input: White YPbPr audio plug. Output: terminal 6 SCART. left speaker input.
  • Right column. Input: YPbPr audio red plug. Output: terminal 2 SCART. right speaker input.

How to connect dvd player to samsung smart tv. samsung smart tv connect to dvd player very easy

Sound ground common for both channels, located on the SCART terminal 4. The question arises as to how to correctly number. The answer is simple. SCART contains a mechanical key. protection against incorrect switching. Be guided by it. Considered connectors for connecting DVD to TV.

Before opting for the final DVD player, it is worth looking at the user manual or looking at the available connectors on the TV panel before buying. The player comes with a cable for connecting to a TV. A common case is the purchase of equipment from different manufacturers, and the types of connectors may differ. In this case, the question may arise, how to connect the dvd to the TV, if the devices are of different generations.

Arrow. You are connected. What now?

QLED TV not only makes it easy to connect with Invisible Connection and One Connect Box, it also features auto-sensing, which means whatever you plug in will automatically appear on your TV screen. No more guessing or looping through every HDMI port to find what you are looking for. Just select it from the menu, because QLED TV tells you what’s where. Not to mention, Invisible Connection only allows one Samsung Smart Remote to control each device. that’s why we call it One Remote Control. ‖ No more button presses and no more reaction, because this is the wrong remote. QLED TV makes it easy to set up your TV and jump straight to your entertainment.!

Topics: QLED TV, 2017 Samsung TV, How to connect phone to TV, how to connect Xbox to TV, how to connect laptop to TV, how to connect DVD player to TV, Samsung Smart Remote, Samsung TV one connect box

Stream DVD from PC to Samsung TV

One of the best and easiest ways to play your DVDs on Samsung TV. This is a disc streaming from PC to Samsung TV. You need good professional software to stream your DVD and Wondershare UniConverter is perfect for that. This complete video toolbox has a feature that lets you cast videos to your TV. Video streaming software supports a range of formats such as AVI, MKV, VOB, MPG, FLAC, MTS and more.

Component cable

The component type of wire consists of 5 plugs. For the correct connection, you need to use each of them. On the panels of the DVD device and TV, you need to find the Output label, as well as the corresponding port in different colors.

The white and red jacks are used to carry the audio signal and are often separate from the rest. Blue, green and red are for video signal. Make sure all 5 plugs are connected.

When using component wire, you can get confused because there are two tulips of the same color. red. To deal with this, you need to put the wire on the table, and count them in a specific order: green, blue, red (video signal), white, red (audio signal).

Some wires may only have green, red and blue plugs. In this case, you will have to purchase an additional red and white cable to transmit the audio signal.
To make sure that Dividi is connected correctly, you need to press the “Source” button through the menu and turn on the corresponding video channel on the TV.

The picture must be transferred to the screen. If it is difficult to determine which signal source is connected to the TV, you need to alternately click on each item in the list with the DVD turned on.

If an image appears, then this is a new connection. If the TV monitor only receives video or audio separately, then the connection was wrong. It may also be that the signal does not go to the device at all.

In such a situation, you need to use several options for solving problems:

  • In the absence of a video signal, red, green and blue plugs should be inserted into the corresponding inputs of the same color to the “Input” connector on the TV and “Output” on the DVD player.
  • If the sound does not turn on, then the white and red wires should be connected to the jacks of the same color of the “Input” connector on the TV and “Output” on the set-top box.
  • Check that the two red wires are not reversed. Many users face this difficulty and this is the most common way to effectively solve the problem.

If you encounter other problems, you should do the following:

Not sure how to connect laptop to TV?

Presenting in the office often requires two things: confidence and a TV connection. Similarly, if you want to see something on your laptop at home on the big screen, you also need a TV connection. ‡ Luckily for you, with QLED TV, you have two options for connecting your computer to your TV! You can download the Smart View app to your computer and connect in the same way as with a mobile device. Wow, it’s that simple. Or you can use an HDMI cable to connect, which is also very easy because you just plug it into the One Connect Box.

Step 1 Launch UniConverter and open the media server.

Download, install and run Wondershare software on your computer. In the main interface, select the Toolbox tab, which will open the Media Tools category. Click on the Cast to TV option and a new Media Server window will open.

Steps to Stream DVD from PC to Samsung TV with Wondershare UniConverter:

Before proceeding to the next steps, insert the disc you want to play into your computer and connect your Samsung TV to the same network as the computer.

Step 2 Connect Samsung TV to PC.

A new window will show all the videos available on your computer in the PC library. Click the Import button to add videos from the inserted disc to your library.