How To Connect Bluetooth To TV

SIMple columns

If you replace the small internal TV speakers with a pair of external or shelf-built speakers, you will notice how much the quality of your TV sound system changes. It is not necessary that the speakers for the TV be very large, but it is desirable that the speakers have their own amplifier.

The design of standard speakers can be different: round, square, oval, flattened. They are also made from different materials: plastic, MDF, fiberboard or chipboard. If the speakers have a built-in amplifier, then they will have an additional power cord. Active speakers can significantly improve the comfort when watching TV programs, because they have their own sound amplifier.

How To Connect Bluetooth To TV

If you decide to connect passive speakers to your TV, then you need to pay attention to the power of the speakers. This parameter should in no case be lower than that of the TV, otherwise the speakers will wheeze at high volume and quickly fail. It is also important to observe the polarity when connecting (if there are no marks “” and “-“, then the polarity can be determined using a regular battery).

The SIMplest option for enhancing your TV sound is to connect stereo speakers via RCA outputs. Analogue RCA connection outputs send two channel stereo (content dependent) from the TV to an external audio system that even passive speakers can receive.

Home theater connection

The peculiarity of connecting a home theater is that the set of multimedia centers does not include wires for connecting additional devices, so you will have to buy them yourself.

Look at the back of the center and find the entry slots. Use the same method to determine the type of output on your TV. Now you need to connect the two devices to each other, but do not forget to disconnect them from the mains before connecting.

Most often, the connection of a TV to multimedia equipment is carried out either through line connectors or SCART. Once connected, the speaker is set to AUX mode. If you did everything correctly, then the sound from the TV should come from the speakers of the media center.

However, there are many new TVs that do not have analog outputs (RCA or SCART) and instead have an HDMI port. For example, TVs TM Samsung without audio are very popular these days. This means the audio output is built into the HDMI card on the device.

Of course, this can be intimidating to the user if their stereo receiver only has an RCA audio connection. But do not rush to worry, there is an option for such a situation.

HighDenition Multimedia Interface is an audio / interface that is used to transfer audio and visual data. This is the flat port you see on TVs, audio systems, and other devices. If both devices have HDMI ports, then there will be no connection problems: all you need to do is connect the TV to the audio system using an HDMI cable.

However, if your TV has HDMI and your audio system does not have one, you need a dedicated switch box. A typical HDMI 4 × 1 switcher has 3 to 4 different options for separate audio outputs to connect to your sound system:

  • Digital coaxial;
  • Digital optical;
  • Analog RCA port (red and white jack).

You just have to choose the port that your audio system supports. With this switch, you can connect any receiver, external speakers, home theater or surround sound system. This solution will allow you to truly enjoy music or film, and especially gamers will like it.

Multimedia center

It is also possible to improve the sound transmission of television programs due to the multimedia centers available in the house. Powered speakers of these systems have built-in power amplifiers, so they can deliver an improved dynamic range: you can get better sound with less power. Acoustic design will be legible and clear.

Computer speakers are also, as a rule, active audio devices. They are powered from the electrical network, so there is no need to pull additional wires.

Home theater

It makes sense to combine the stunning visual clarity of your HDTV with the same stunning audio quality. And what equipment will cope with this task best of all, if not the “Home Theater” speaker system?

These are not just high-level speakers, this is a whole complex of sound-reproducing devices, created for optimal viewing conditions at home. This technique completely immerses you in the events on the screen due to the well-thought out sound distribution.

A home theater speaker system can have a different design, depending on the size of the area for which it is designed. There are systems 2.1, 3.1, 5.1, 7.1, etc. It can contain the following elements:

  • Front, rear, center speakers (floor, wall, mounted);
  • Subwoofer. for reproducing low frequency sound;
  • Satellites. auxiliary devices operating in a limited frequency spectrum;
  • Soundbar is a mono speaker with several internal speakers.

The more elements the system has, the higher the broadcast quality. And so that the sound transmission is at a high level, they use multi-channel communication.

Options for acoustics to the TV and how to connect it

Lately, the picture quality standards for watching TV have increased dramatically, and today all modern models of LCD, plasma and OLED TVs are able to recreate an excellent, crystal clear picture, but they are not able to provide adequate sound.

Their tiny built-in speakers cannot clearly reproduce dialogue, much less convincingly immerse us in the atmosphere of realistic explosions, car accidents and other turmoil that we see in the plots of our favorite films. If you want to really feel surrounded by a movie soundtrack, hear powerful immersive sound, or SIMply get a clearer broadcast, then it’s better to use additional speakers for your TV.

Our detailed guide will clearly outline all of the options for getting the best sound for your TV.

Speaker selection tips

How to choose speakers for your TV and choose the best one? It all depends on your budget and individual requirements for sound quality. For some it will be quite acceptable if his speaker system costs like a car, but for someone one pair of inexpensive wooden speakers would be an excellent option.

If you’re a passive music listener and just want to make your TV sound more clear, you don’t necessarily need huge speakers or a full 7.1 surround sound system. You can opt for conventional bookshelf or wall-mounted speakers of any worthy brand (SVEN, Yamaha, VVK, Philips). Want more bass? A small subwoofer will help provide extra low frequency range.

If you are an active music listener or just want a deeper immersion in the plot on the screen, then you should pay attention to the floorstanding speakers. Even a small floorstanding loudspeaker with several satellites can reproduce truly full, very pleasing sound without taking up much room in the room.

Installing a soundbar is also a great option to improve your TV sound. Many models of these speakers come with a built-in subwoofer, which is very convenient for a perfect integrated design.

Soundbars can significantly improve the sound of TV speakers, but they cannot compete with professional home theater speakers, in which the sound system is built around a high quality AV receiver and a very powerful amplifier. From such speakers, the sound comes not only perfectly clean and balanced, but also truly spacious and realistic.

An important part of the TV speaker selection process is considering the space in which the speakers will operate. Small closed rooms are not very good conditions for large floor-standing speakers: firstly, they will take up a lot of space, and secondly, they will “load” the room with bass, which can lead to a muddy sound. But large and spacious rooms will make the sound of a small speaker small, not too noticeable and localized.

READ  What to do if you forgot your Apple ID

A very popular option is the choice of wireless speakers. Such elements are connected to the music center via Bluetooth. No wires can be pulled behind them, so they can be installed even in the uppermost corners of the room.

But in addition to aesthetic criteria, it is important to pay attention to two main technical characteristics of acoustic devices. sensitivity and power.

The first parameter is measured in decibels and directly affects the level of output loudness: the higher the sensitivity value, the louder the system can reproduce the sound.

Speaker power is another metric that affects speaker volume. It is defined in three different parameters:

  • Nominal;
  • Maximum;
  • Peak.

You need to focus on the indicators of the nominal power, however, here it cannot be argued that the higher the power value, the better the speaker will sound. It would be wrong to say that a 150-watt equipment will produce better and stronger sound than a 50-watt speaker. The acoustics power characteristic speaks only of the mechanical reliability of the speakers.

When choosing speakers, you need to focus on the size of the room in which the acoustic equipment will be installed: the larger the area, the more powerful it is to buy the speakers. For a room with an area of ​​20 square meters, a 50 W speaker will suffice, and if you are equipping a living room of 30 m2, then it is better to choose from 100-watt models.

Stereo system

Despite the fact that acoustic systems are developing rapidly, trying to keep up with the emergence of more and more audio formats, stereos are still in demand.

Classic stereo transmission assumes minimal audio processing and the shortest audio path. This is a method of sound reproduction that creates the illusion of a multidirectional sound perspective, as in natural hearing. This is usually achieved by using two or more independent audio channels.

Stereo sound panels are designed to complement LCD, Plasma and OLED TVs. Soundbars are a design product that creates a wider sound field from a single speaker cabinet. At least the soundbar will contain speakers for the left and right channels, but there are models that have a dedicated center channel and additional subwoofers, and even side or vertical speakers.

They can be installed on a shelf, on a table, just below the TV, or hung on a wall. Soundbars are of two types: stand-alone and passive. Although both types provide the same listening experience, the ways in which they integrate with the TV are different.

Column types

The problem with poor sound quality on TVs is that speakers have to be installed inside thin TV cases. Loudspeakers make sound by vibrating and need space to expel enough air to get quality sound, something that is limited in modern TVs. The result is a subtle sounding wave that cannot satisfactorily complement the picture on a large screen.

As TVs got thinner, their sound became poor quality. Television speakers are not only small and not powerful enough, they almost always point in the wrong direction: they emit sound either down or against the wall behind the TV. Unsurprisingly, everything comes out fuzzy and out of focus.

To make watching TV more comfortable, it is better to have an external audio system. Options range from SIMple soundbar installations to more sophisticated powered speaker or home theater systems in a box.

The first thing you need to get acquainted with in order to understand which TV acoustics are suitable for your model are audio connectors. They are of the following types:

  • Universal SCART connector;
  • RCA or composite AV-connector, aka “tulip”;
  • Analogue acoustic signal output (right / left);
  • TRS-jack (for connecting a headset);
  • HDMI port.

The SCART connector is intended for connecting devices with a wideband 21-pin plug. It transmits not only audio signals, but also. as well as control signals.

RCA-jack (tulips) is a popular stereo audio jack. Its sockets have different colors for easy navigation: white is for mono or left channel, and red is for right speaker.

You can connect active speakers with an amplifier to the line-out and TRS-connectors, but the best option for connecting high-quality audio devices is considered to be an interface for high-definition multimedia. HDMI. All modern LCD TV models have HD output and professional home theater systems and soundbars are adapted to them.

As for sound speakers, they also have their own classification:

  • SIMple columns;
  • Media centers;
  • Stereo systems;
  • Complexes of audio equipment called home theater.

The process of connecting speakers to a TV

To connect your stereo speakers to your TV, follow these steps in this order:

  • Place the receiver or amplifier as close to the TV as possible, while remaining within the reach of other devices (cable or satellite box, DVD-player, etc.);
  • Ideally, the TV should be located 120-180 cm from the amplifier, otherwise a longer connecting cable will be required;
  • Make sure all equipment is turned off before connecting;
  • Find analog or digital audio output on the TV (AUDIO OUT), it can be two RCA jacks or one 3.5 mm mini-jack, for digital audio transmission there will be an optical output or HDMI OUT port;
  • Find a free audio input (AUDIO IN) on your stereo receiver (most likely, the stereo or home theater input will be an RCA jack or an HDMI input port);
  • Using a cable with appropriate plugs at each end, connect the TV’s audio output to the receiver’s audio input;
  • When all cables are connected, turn on the stereo amplifier and TV. But before checking the result, make sure the volume on the receiver is at a low level. The sound from the TV should now come from the speakers.

All audio in and audio out connectors are always labeled, so it’s easy to navigate through them. Below you can see a diagram of the main connectors:

Let’s take a look at how to connect speakers to a TV using an RCA connection.

Look at the back of your TV, if there are red and white RCA jacks labeled “audio out”, then you can use a regular left and right stereo audio cable (cinch) to connect. We connect one end of the cable to the TV according to the corresponding colors of the connectors, and the other to the speaker connector, where there is an inscription “Audio input”. If the device has several inputs, it is better to connect to the one marked as “TV-IN”.

It’s important to note that on many newer TVs, analog RCA or 3.5mm connections are no longer available. This means that if you are buying a new TV and your soundbar or audio system only has analog audio inputs, you need to make sure that the TV you are planning to purchase does indeed have an analog audio output option. Otherwise, you may have to upgrade to a new soundbar or audio system that provides digital optical audio and / or HDMI-ARC connectivity options.

Depending on the speaker system and TV model, there may be the following connection options:

  • The use of fiber optic cable is considered optimal. It does not respond to electromagnetic radiation, so the sound is delivered without the slightest interference or distortion. Connect the optical out cable on your TV set-top box to the optical in port on your cinema receiver, and you can enjoy deep and high-quality sound while watching any program;
  • It is possible that your model of equipment has coaxial jacks, this is also an excellent option for the pure transmission of multichannel sound without the procedure for converting to an analog signal. The audio output connector on the TV will be called S / PDIF (Sony / Philips Digital Interface), or “out coaxial”, and on the cinema receiver “coaxial in”.

Wireless connection

A universal method that does not require the use of wires. But this is an energy-consuming option. Its disadvantage is that the sound may not be of very high quality due to the transmission in a compressed format (does not apply to devices that support AptX).

The connection is made using Bluetooth. If the speaker and smartphone are equipped with NFC chips, the connection is easier. The exchange of data between devices is automatic, you need to attach the speaker to the back of the mobile gadget, and then confirm the action on the phone (“Ok”). There will be no connection problems even if Bluetooth chips of different versions are built into the speaker and smartphone.

If the phone does not have this type of chip, the connection will have to be done manually. For this you need:

  • Activate the wireless speaker and turn on the Bluetooth button.
  • In a smartphone, pull the “curtain” at the top of the screen and press the Bluetooth button. If this function is not available on the quick access panel, you need to: open the phone settings, go to the “Connected devices”. “Bluetooth” section, move the slider to the right to enable.
  • After searching on the screen of the mobile gadget, all Bluetooth devices that are nearby will be displayed.
  • Choose a name that matches the speaker model. Tap on it. the connection of gadgets will start.
  • You may need to enter a code or hold the power button for a few seconds to pair successfully.
READ  Connect smartphone to TV via USB

The next time you connect, data will be exchanged automatically when Bluetooth is on on both devices.

Turning on the speaker via Bluetooth on the phone: possible problems

Before turning on Bluetooth, you need to make sure that the music acoustics are working. After pressing the power button of the music device, a special indicator should light up. He confirms the readiness to work. The absence of a light signal or a blinking LED may indicate the need to charge the battery.

Detailed instructions in the previous sections answered in detail how to connect the speaker to the phone via the Bluetooth function. Below are the difficulties that may arise during the connection:

Connecting to iPhone

  • Turn on the portable speaker and activate the Bluetooth function.
  • In the iPhone settings, click on the icon, which usually denotes the Bluetooth option.
  • In the menu that appears, activate the “On” button (move the slider to the right).
  • All active devices will appear on the screen of the mobile gadget.
  • Select the name of the music column, after which it will automatically connect.

Depending on the model of the Bluetooth speaker, the connection will be notified by sound or by changing the indicator on the case. All that remains is to turn on the music on the iPhone to check how successful the connection was.

Connecting to an Android phone

How to connect bluetooth to phone? First you need to turn on the speaker and press the Bluetooth button on the case (in some models there is no such button, so there is an automatic process of searching for devices). The Bluetooth connection on the speaker is signaled by an indicator on the case or sound notification.

Next, you need to activate Bluetooth on the phone. If connecting a new device for the first time, you can do this using the menu on the phone. Select “Settings”. “Bluetooth”. activate the Bluetooth module (move the slider to the right) and update the list of devices available for connection. Then click on the name of the musical acoustics that appears. and it will go to the list of devices ready for connection.

Important: There are phone models with a longer path to access the Bluetooth module: go to the menu, select “Settings”. “Wireless networks” / “Connected devices”. “Bluetooth”.

Synchronization of devices on subsequent connections will occur automatically.

How to connect a Bluetooth speaker to a phone: 2 proven options for 2 OS

There are two options for connecting a Bluetooth speaker to a phone: a wired connection or via Bluetooth. Which method is better? What is the difference between connecting a speaker to a mobile gadget on Android and iPhone (for example, 11 Pro Max 64GB Silver)? What difficulties can a user face when connecting? These issues are highlighted in the material.

Wired connection

This requires a two-way audio cable (AUX) or USB and AUX cables. The first option refers to audio speakers (they have a built-in battery or are connected to the network for charging). The second is used in the absence of these power supply elements, when a smartphone acts as a battery for a music gadget.

Audio cable (AUX). a wire, the two ends of which have one 3.5 mm mini-jack. One end is inserted into the desired speaker jack, the other into the phone headphone jack. The connection of devices is completed by turning on the speaker. After connecting, the screen of the gadget should display the inscription “Audio jack is connected”.

In the case of the second connection option, the user needs to have:

  • AUX and USB cables;
  • micro USB to regular USB adapter.

To connect:

  • Connect the USB adapter to the phone.
  • Insert the cable from the speaker into the USB connector.
  • Use the AUX cable in a special socket to connect gadgets to each other to play music.

With a cable, the user is dependent on both the phone and the speaker, because when moving around you need to carry both devices with you. But, despite this disadvantage, the sound will be transmitted without loss. In this case, the battery charge is consumed slowly, but a compact power bank will not be superfluous. The device will help out if the user forgets to charge the phone.

How to connect a Bluetooth speaker to your phone

The connection with a mobile gadget can be wired or wireless. If in the first case you need cables, then wireless synchronization depends on the connected Bluetooth or Wi-Fi (not all music speakers support).

With the help of Bluetooth, which is in all new smartphones and the same portable speakers, you can quickly and easily set up data exchange. How to do this and what option is better to connect a Bluetooth speaker to a smartphone. next.

Connection depending on phone

If mobile gadgets are equipped with Android OS, connection to Bluetooth takes place in a couple of clicks: turn on the Bluetooth function, configure the necessary parameters and start pairing with other devices.

With regard to connecting the music speaker to the iPhone, the steps are slightly different from the previous option. But users of both smartphones and iPhones will cope with this task without any problems.

The choice of how to connect a portable speaker to a phone (for example, Huawei P Smart 2019 Aurora Blue) depends on the individual needs of the user. For many, a convenient and SIMple option is a Bluetooth connection. But this connection also has its drawbacks. the sound is transmitted in a compressed format, and the battery in the speaker is quickly discharged. A wired connection makes the user dependent on both gadgets, which must be taken with them in case of movement. But this method will avoid distortion with sound, and the battery charge will be wasted more slowly. Both options do not require the installation of third-party applications and can synchronize any devices with each other.

Connection types

Although the main format for using a portable audio device is wireless connection, it also has an input jack for a 3.5 mm cable for wired connection.

How to connect to a phone or tablet

It is easier to connect Bluetooth speakers to mobile devices than to a laptop and especially a stationary PC, which requires a wired connection or the installation of a Bluetooth module. To pair the speaker with your phone or tablet, you need to follow a few SIMple steps:

  • Go to the “Settings” menu section of the phone.
  • Open the “Bluetooth” tab.
  • Select the option “Turn on Bluetooth”.

After completing the above steps, a list of devices available for pairing will open. If the name of your portable audio device does not appear in the list, you can search for it. After the equipment is connected, the smartphone will save its name in the list of available devices and the next time you connect it will not need to search.

How to connect to computer and laptop

Before connecting speakers to a laptop, you need to make sure that Bluetooth is turned on on it. Speakers usually have an on / off switch that must be held down for a few seconds to activate the wireless transmission function. There are also devices in which the pairing function starts automatically for a few seconds or minutes after turning on.

JBL portable speaker control panel

A flashing light will appear when the speakers are ready to pair. Now you need to click “Start”, go to the “Settings” section of the computer menu, select “Devices” to see a list of all installed devices. On the left there is a list where, among other things, a Bluetooth icon will be displayed, which you need to click on so that the laptop starts looking for devices with which it can pair.

Sometimes additional authorization is required. This is necessary to confirm that the user wants to pair the devices on their own, and not someone is trying to hack into the computer via Bluetooth. There are several ways to authorize, but most often you need to enter the appropriate code indicated in the user manual or on the sticker of the device.

If the required code is not on the box, you can try entering the password “0000” or “1111”. This works in cases where the manufacturer installs the code on the devices himself. Pairing occurs only after authorization. After connecting the speakers, they will be available in the “Settings” section menu, and then “Devices”.

READ  Do I need a voltage stabilizer for a TV

The speaker is too far from the playback device

Each Bluetooth device has a different operating range. The small speaker works uninterruptedly at a distance of up to 10 meters, and some even at a distance of 25 meters from the device. But cheaper models often have problems with signal reception after a few meters away from the playback device. In addition, a natural obstacle such as a concrete wall can break the connection. Check if the distance between the devices is too great or if there are any obstacles on their route, you can read the instructions.

Setting up a JBL Bluetooth speaker

JBL is one of the popular brands of audio equipment, the website of which contains a detailed description of connecting Bluetooth speakers of all models of the manufacturer. To pair the devices, follow these steps:

  • Put the speakers in discovery mode by following the steps in the user manual. Bluetooth function may remain available for 60 seconds, after which it will need to be reactivated.
  • Enable Bluetooth discovery mode on laptop, tablet or smartphone depending on operating system (Windows, Mac, Linux).

After activating the system, the name of the audio speaker will appear in the list of devices available for pairing. To connect several speakers to a laptop or smartphone at once, you need to perform several steps:

  • Turn on the JBL speaker. The device needs to be put into pairing mode by pressing and holding the Bluetooth button for 3 seconds.
  • Play music on your first device. You can use any cloud service or your own music library to play music.
  • Press the Connect button on all speakers. The button is designed in the form of an hourglass, and before pressing it, you need to place all the speakers next to each other.
  • Wait for connection. The speakers will be connected within 30 seconds. Once this is done, music will start playing through both speakers.

If you need to break the connection with any of the speakers, you need to click the “Connect” button again opposite the name of the desired device.

How to enable bass

To turn on the bass on JBL speakers, you need to SIMultaneously press the Bluetooth function and volume down buttons. It is not recommended to listen to music in this mode all the time. it can damage the speaker.

How to connect a USB flash drive

In some models of JBL portable speakers, it is not possible to connect a USB flash drive: they play music only via Bluetooth, Wi / Fi or via a wire with a 3.5 Jack connector. New models are equipped with a USB connector, which is located on the side panel of the device under a dense rubber cover. After connecting the flash drive, the device will automatically play the audio tracks that are on it.

Incorrectly connected speaker

If the device is paired with a computer or laptop, it may periodically lose communication with it due to incorrect connection. Updating the connection is SIMple. you need to uncheck the box with a headset in the connected devices window and instead click on the sound settings of the wireless speaker, choosing the desired configuration.

By audio cable

Most speaker models have an audio input for a 3.5mm jack cable. Some devices are equipped with a 2.5 mm mini-jack connector. This parameter must be indicated on the product packaging.

To connect, you need to insert one end of the cable into the speaker connector, and the other into the connector of the connected device: laptop or computer. In some cases, it will be necessary to detect the speaker system in the Windows settings, if this operating system is installed on the computer.

JBL portable speaker with micro-USB and mini-jack 3.5 mm

Bluetooth is missing or cannot be activated: what to do

There are special devices called Bluetooth transmitters that pair perfectly with any TV. Its purpose is to take sound from TV through a cable and send it via Bluetooth to any wireless gadgets.

Connecting speakers to Samsung via Bluetooth

With another popular company from South Korea Samsung, the situation is a little easier, but still, many users report problems when trying to “connect a speaker to Samsung.” And here people are faced with the inability to connect portable speakers to the TV if they are of non-original origin. A way out nevertheless found.

LG TV Plus

Android and iOS device users can take advantage of a development called LG TV Plus, which was created specifically to make it easier to control LG TVs running on webOS.

To be able to tune your TV through your gadget, first download LG TV Plus to your smartphone or tablet. In the downloaded program, find the “Bluetooth Agent” submenu. The system will then display an intuitive service menu to help you connect a speaker or speaker system to your LG device. If everything was done correctly, then you were able to pair it to play sound.

Step-by-step instruction

  • To get started, open the TV settings and go to the “Sound” subsection, and from there to “Speaker settings”.
  • When doing this, place the device to be paired in close proximity to the screen. Bluetooth on it needs to be activated immediately.
  • Now select “Bluetooth Headphone List”. The program will start searching. Having found suitable speakers or headset, you will automatically activate the connection with the TV.

If we are talking about Samsung devices of the “K” series, the actions will be slightly different: “Sound”. “Select speaker”. “Audio Bluetooth”.

Connecting speakers to LG via Bluetooth

Objectively, 65% of TVs operated in Russia are produced by the Korean concern LG. The quality of technology, confirmed over the years, does not eliminate the possible problem with sound. These instructions will allow you to connect speakers to enjoy defect-free sound.

Step-by-step instruction

All the necessary information on connecting the device is contained in the operating instructions for the TV. A short list of manipulations looks like this:

  • Turn on screen.
  • Go to the menu.
  • Find a section with Bluetooth settings.
  • Activate the procedure for searching for devices available for pairing.
  • Select columns.
  • Wait for the device to connect.

This is ideal when connecting, but it sometimes fails. over, the manufacturer LG claims that digital TVs are only capable of recognizing speakers and headsets that are produced by the same manufacturer. What to do in this case?

How to connect a portable speaker to a TV

When purchasing a modern model, the buyer focuses on the quality of the picture, the brightness of the color rendering, the warranty period and other factors. But not everyone is interested in the sound of a brand new purchase.

Even experienced manufacturers have the sin of underperforming built-in speakers. But you shouldn’t worry about this, because for the last five to ten years a separate stereo system has been connected to each model using a special connector or Bluetooth technology.

Activating the Bluetooth section

In the menu, find the “Sound”. “LG Sound Sync (Wireless)” section. As a rule, the Bluetooth adapter that is built into the TV works perfectly in conjunction with the remote control and other additions of the parent company.

Therefore, it is reasonable to talk about buying a wearable Bluetooth and connecting it.

In doing so, do the following:

  • “Bluetooth menu”. “Search”. “OK”.
  • Press the search key, usually colored green.
  • Select the desired device among the found and click “OK”.

Expert advice

If you do not want to spend money on the purchase of additional equipment, order the transmitter on the well-known website from China. Or, initially choose a TV that runs on Android TV. It is these devices that allow you to connect to any device via Bluetooth.

And you can also use the old old-fashioned method and connect the speaker to the TV through a wire and a special socket. If the equipment supports the scart standard, then using the connector to the device it will be possible to connect any equipment, for example, an amplifier. At the same time, sound can be transmitted with a much higher quality than when using Bluetooth technologies. The presence of the required outputs can be checked on the rear panel.