How to connect wireless headphones to your TV
Today it is not so difficult to watch your favorite programs on TV without disturbing your household, even if you have to e small room with someone. To do this, it is enough to purchase headphones and the problem will be solved.
Headphones for TV can be divided into two types. The first includes wired, and the second, respectively, wireless. a more modern and convenient type. The main characteristics of both types are the frequency range, which actually determines the quality of the reproduced sound, impedance, sensitivity, maximum power, which determines the possible sound volume, and the level of distortion (naturally, the lower it is, the better).
When choosing a wired option, it is better to pay attention to a full-size invoice option, preferably a closed type, although in terms of ease of use, everyone makes a decision on their own based on personal feelings. The resistance should not be high. And from the need to constantly reach for the remote control, the presence on the wire or on the case of the volume control will save.
When choosing a wireless model, you need to decide on the desired principle of operation of the headphones (radio frequency, infrared, Bluetooth or wi-fi). Each of them has its own important characteristics. So, for example, radio headphones boast a range of up to one hundred meters, as opposed to ten meters, which the other two options can offer.
Also, you need to pay attention to the type of acoustic design. After all, models with an open type let in external sounds, which is very inconvenient at a high noise level, with a semi-closed type they provide slightly better sound insulation, and a closed type does not allow noise from the outside at all, which can be very convenient in some situations. But the disadvantage of the latter is the deafness of the sound being played.
So, after purchasing the model they like, many users face the question: how to connect headphones to the TV? In fact, there is absolutely nothing complicated about this, but the process has some differences, depending on the type of headphones purchased and the actual TV model. Several options are possible here.
In the case when the TV is connected to a home theater system, which are almost always equipped with a 3.5 mm jack, it is enough to connect headphones to the back of the unit.
If you need to connect headphones wirelessly for the TV, you will have to perform a few more steps than in the first case. To begin with, you need to connect the micro-transmitter itself to the power source using a plug, or, in the case of battery power, insert the latter into the space provided for them. After that, you need to connect the micro transmitter to the corresponding socket on the TV. Again, in the presence of a tulip, the connection is made directly, otherwise, using an adapter.
Next, the device needs to be turned on and configured by scanning the range using a specific button (it will be written about in the instructions) in order to catch the signal from the transmitter. In case of failure, it is enough just to reset the result and try again the required number of times.
There is also the option of connecting headphones using Bluetooth technology, even if the TV is not equipped with this function. To do this, you need to purchase headphones with a transmitter-receiver. They are sold complete with two adapters, one of which works for reception, and the other, respectively, for transmission, which play a key role. It is with their help that you can easily connect any headphones to the necessary device, if it has a 3.5 mm jack. True, the work will be carried out only within ten meters, but this is a lot.
So, one of the adapters is inserted with a plug into the jack (3.5 mm) of the TV, the other is connected directly to the headphones. Then you will have to perform the procedure for configuring the adapters on top of each other, which is quite SIMple and is described in detail in the instructions. Most likely, you will have to hold down the buttons on both adapters and wait for the necessary indicators to turn on.
How to connect Bluetooth headphones to Samsung
Recently, users are increasingly opting for a wireless headset. Wired is a lot of hassle. In the. the wires are constantly confused. And instead of enjoying the music, we have to untangle this tangle for a long time. This article will show you how to connect wireless Bluetooth headphones to your Samsung smartphone.
- Way to connect wireless earbuds to Samsung
- Connect Bluetooth headset with one button
- Resetting Bluetooth Headphones in Samsung Smartphone
- Why won’t the Bluetooth device connect?
Way to connect wireless earbuds to Samsung
As many know, Bluetooth technology develops over time and new versions are released. Even if your phone has, for example, Bluetooth 2.0, and the headphones support version 3.0, you can still use them. Since the versions of the technology are backward compatible. The process of connecting the headset to a smartphone begins with turning on the device itself.
Find the power button on them and activate it.
- You need to enable Bluetooth on Samsung. This can be done in the settings or in the quick access menu. lower the curtain and select the button with the Bluetooth logo;
Select a headphone model from the list to connect.
This headset protection is used in many models. It is necessary in case there are other smartphones with activated Bluetooth technology nearby. Often this procedure is necessary when you first connect to Samsung. You can try to find headphones directly through the search.
Connect Bluetooth headset with one button
Most wireless headphones or headsets have only one power button on the body or on an additional remote control. They are often equipped with an indicator that shows the modes in which the device is currently located.
Let’s look at the process of connecting headphones with Bluetooth technology to a Samsung phone using an example:
- To turn them on, press the power button. The indicator should light up red;
After selecting your headphones from the list, you can start using them immediately. To configure them in your Samsung phone, you need to click on the gear icon in the list of connected devices.
Resetting Bluetooth Headphones in Samsung Smartphone
Sometimes Bluetooth headphones are connected separately. Since they are essentially two separate devices. And they can work on two Samsung smartphones at the same time. If you connect them to the same phone, they will not be identified as one, but as two different devices. They may even not work properly. In this case, a factory reset will help. Let’s see how to do it.
For example, Redmi’s AirDots will be taken:
- If your headphones have a charging case, take them out;
- Also, if each earbud has a power button, hold them down SIMultaneously for up to 20-30 seconds;
Almost all Bluetooth devices in the kit have Russian-language instructions. If something is not clear to you, you can get the necessary information from it. In general, the process of connecting wireless headphones of any company and for any mobile phone is standard.
Why won’t the Bluetooth device connect?
Most often, users whose smartphone connects a large number of devices encounter problems when connecting a Bluetooth headset to a phone. Because of this, first of all, there is a considerable delay in connection. Since the standard application creates its own little-understandable scheme for us, according to which several devices are connected.
In this case, we recommend using third-party connection manager utilities. For example, Bluetooth Pair or Bluetooth Scanner. And connect wireless Bluetooth headphones with a Samsung smartphone using them.