What you need to know about connecting Bluetooth headphones to your TV
We may need to connect a wireless device to TV in two main cases:
|We do not want to disturb the people around us with a loud sound.||In this case, the use of wireless Bluetooth headphones is most justified and will definitely be encouraged by others.|
|Due to the sound of headphones, on the contrary, we want to abstract from the people around us and extraneous noises.||This will help you to focus 100% on the sound and picture from the TV.|
It’s also important to make sure your TV has a built-in Bluetooth module. You can get the relevant information in the technical passport of the device, or by going to the TV manufacturer’s website and reviewing the information about your device.
Way to Pair Bluetooth Device with Samsung TV
We’ll start our review with a description of connecting Bluetooth headphones to Samsung.
To do this, you need to do the following:
- Open your phone settings;
- Select the “Sound” section;
- In this section, click on the “Speaker Setting” option;
To return to listening to sound through the TV speakers, SIMply turn off the headphones. A pop-up message will appear on the screen asking if you want to play sound through this device. Select “Yes” to play the sound again through the bluetooth device.
If you want to turn off the automatic detection of headphones by the TV, select your headset model in the speaker setup menu and then “Delete”. ” Yes “.
How to Connect Wireless Headphones to LG TV
As we mentioned above, you can SIMply connect bluetooth headphones and an LG TV only if these headphones are also made by LG.
The very procedure for connecting to TV in this case is as follows:
- Click on “Menu”;
- Select “Sound”;
- Next, find “Audio Out”;
You can also use the following scheme:
- Go to the menu and select “Bluetooth” there;
- Next, select “Bluetooth headset”, then click on “Ok”;
- To search for devices, press the green key;
- From the found typefaces select yours, then click on “OK”;
- If necessary, enter the PIN, using the number from the instructions for the headphones.
The above two methods do not work well with Bluetooth headphones from other manufacturers. In this case, the LG TV Plus application can help us. You need to install this application on your smartphone and connect it to your LG TV. In the settings of this application, run the “Bluetooth Agent” section, and through this agent connect the headset to the LG TV.
If the agent is not visible in the application, look for an earlier version of this application on the network and install it on your gadget.
How to connect Bluetooth headphones to your TV
Most TVs with a “Smart” box support connecting devices using Bluetooth technology. And we can quite easily implement such a connection on our own. Below we will analyze the options for connecting your Bluetooth headphones to a modern TV of a number of popular brands (Samsung, LG, Sony). And also consider the characteristic features of such conjugations.
Sony TV manual
The schematic diagram of the connection of wireless headphones to a Sony TV via Bluetooth connection boils down to something like the following:
- Go to your TV menu;
- Select there “Wired and wireless networks”;
Types of headphones
There are several types of wireless headsets on sale.
The company’s devices operate on a specific webOS platform. It is very different from the same Android and is much more picky about the equipment. Before connecting headphones to an LG TV, it is worth updating the software to update the wireless protocols.
- Go to the main TV menu (not to be confused with Smart TV).
- Open the folder “Sound”.
- We put a beacon on the line “Wireless”.
- We activate the headset.
- Close all windows and wait for the OS to synchronize.
If the TV does not have an internal Bluetooth module, then an external adapter and other procedure are required.
Synchronization with an external Bluetooth transmitter:
- Open the menu and find the Bluetooth section.
- We activate the headphones to turn on the Bluetooth protocol.
- In the menu, start the search by clicking on the large green button.
- After that, we select the desired device and, if necessary, enter the pin code.
Sometimes it may be necessary to restart the TV if the first time to find the headset did not work.
A headset of this kind works on the principle of a walkie-talkie and has not gained popularity either. As in the case of infrared models, external factors significantly affect the signal quality. If any active electrical device is working nearby, then the background will be traced in the headphones.
You can connect to a TV using a radio channel with a maximum effective reception area of about 100 meters. Many TV equipment is equipped with radio transmitters, and there is no need to use third-party equipment such as transmitters.
If your TV does not have built-in Bluetooth
There is also a technique that lacks a built-in module. In this case, you need to purchase an external transmitter (receiver / adapter) to connect a Bluetooth headset to the TV. Such Bluetooth adapters operate from an additional power source and are connected via a USB interface, RCA (“tulips”), 3.5 mm mini-jack, or via an HDMI port.
Connection control occurs through the TV menu and less often through the receiver itself. The TV must recognize the transmitter as an external Bluetooth device. The user only needs to enable it by checking the box next to the adapter name.
Bluetooth headphones are versatile and are suitable for a good half of modern TVs. Most models are limited to a 10m reception area, excluding concrete walls and other major obstacles. Almost all manufacturers try to adhere to this technology, starting from Samsung and ending with Apple, which produces the AirPods headset, which also works over Bluetooth protocols.
Synchronization problems usually do not occur, with the exception of some brands whose technique works on specific platforms. Today’s TV-devices are equipped with a built-in module, and the connection of Bluetooth headphones to the TV takes place through the menu. It is enough to activate the protocol, then start the search and synchronization procedure, without forgetting to turn on the Bluetooth headset. In some cases, when connecting headphones via bluetooth, you may need to enter a four-digit code. 0000 or 1234.
If the TV is without a Bluetooth module, then instead of an external transmitter of the same name, you can use an equally effective alternative. a Wi-Fi headset. It is comfortable, compact and not picky about any obstacles or equipment working in the neighborhood.
The setting options depend on the specific TV model. If you use a router as an additional equipment, you can listen to music up to 100 meters from the TV.
Connecting a wireless headset
Let’s consider the peculiarities of synchronization of wireless headphones on TVs LG, Samsung and devices with the Android operating system. Most devices from Sony and Philips work on the latter. The designation of some sections in the settings may change and depend on the specific firmware, but the connection principle is the same.
How to connect wireless headphones to the TV
Headphones allow you to fully immerse yourself in what is happening on the TV screen. And if wired options were more often used with the old equipment, then modern TVs provide a wide range of connections via wireless protocols. But some have serious hardware synchronization issues. In the article below, we will figure out how to connect wireless headphones to the TV. Let’s talk about common types of headsets and the peculiarities of synchronization with TV equipment using specific examples.
The operating system of Samsung equipment is more loyal to third-party equipment, but there are still exceptions when the TV refuses to work with a headset from other manufacturers. Before syncing, just like with LG, it’s worth updating the firmware.
Connecting the headset to a Samsung TV:
- Open the main settings menu, then the sub-item “Sound”.
- Click on the “Audio Settings” tab.
- We activate the headset.
- Open the sub-item “Headphones” and determine the type of connection (Bluetooth, Wi-Fi or optics).
- We are waiting for the end of the equipment search process.
- Find the headset model in the list and click OK.
This is the most expensive and at the same time the most effective headset in terms of sound transmission quality. Synchronization of devices occurs through the coaxial S / PDIF interface (aka TOSlink), which is located on the rear of the TV.
Which is the best transmitter to choose
The connection technique for all transmitters is approximately the same, but they differ:
- by type of power supply. USB or battery;
- for audio signal reception. RCA, audio 3.5 mm (mini-jack, TRS), fiber optic;
- by the number of connected devices. one headphone or several devices (Dual Link technology);
- for standards support. AVRCP, A2DP and A2DP 1, SBC, APT-X, HFP.
All of these parameters, and especially the standards supported (for example, Philips Semiconductor’s “Blue Tooth” technology, which increases the coverage area and sound transmission rate) greatly affect the cost.
How to know if bluetooth headphones can be connected to your TV
Bluetooth technology has been around for a long time, but TV manufacturers tend to be several years late. Almost all modern Smart TV models have built-in Bluetooth functionality, which makes it easy to pick up wireless acoustic devices. But early generation TVs without Smart firmware will have to be checked for the presence of a Bluetooth adapter, which can be done:
- through the manufacturer’s official website. find the characteristics of your TV;
- view the accompanying documentation or ask a question in Support, if for some reason the TV data sheet is lost or the model is discontinued and is not on the website.
If the TV receiver does not support Bluetooth
You can connect contactless Bluetooth devices to any TV models without Smart firmware using a transmitter.
Connecting Bluetooth Headphones to a Samsung TV Receiver
All Samsung TVs, however, like most television devices of other brands, work effectively only with branded adapters, remotes, headphones, cameras, speakers, remotes. However, you can try connecting another manufacturer’s device to the TV. It is possible that it will function without problems.
- We put the contactless headphones into pairing mode. press the power button and hold it until the LED flashes blue.
- In the TV settings, select the “Sound” tab. then “Speaker Settings”. and then “List of Bluetooth Headphones”.
If there is no Bluetooth headphone item in the speaker settings, then this TV model does not support the Bluetooth function
If you have Bluetooth headphones from another manufacturer, there may be a problem with pairing, since the developers specifically included wireless headphones with the Samsung logo in the list of paired devices so that users would buy out SIMilar products, and not products of competitors
Depending on the model, the TV menu may have a different interface, but the connection principle remains the same. Sometimes, in addition, confirmation of synchronization of the found device may be requested through the code written in the instructions for the headphones.
connecting a Bluetooth headset to an LG TV set
The Open webOS operating system of the third and higher version makes it possible, through the LG TV Plus utility, to synchronize Bluetooth headphones even with those TV devices that do not have a wireless connection function. This is done in the following order:
- Download and install LG TV Plus on a tablet or smartphone, which will provide access to the TV settings.
- We turn on the program by connecting to the TV set via Wi-Fi.
- We confirm the TV model through the code that will be displayed on the TV screen. After successful activation, the LG TV Plus menu will be displayed.
With the LG TV Plus app, you can connect virtually any Bluetooth device to your LG TV, including headphones and speakers
In the settings of LG TV Plus there is a section “Bluetooth Agent” through which wireless headphones are connected to the LG TV
Connecting Bluetooth Headphones to LG TV Receiver
All LG models are based on webOS with an intuitive graphical interface. To connect bluetooth headphones to them, you first need to activate the wireless connection:
Pre-switch the headphones to pairing mode.
The pairing method may differ depending on the model and type of device, so refer to the instruction manual of your Bluetooth headphones
Only original devices can be connected to LG TVs. branded LG headphones, soundbar, etc.
Connecting Bluetooth headphones to Philips and Sony TV devices
Sony and Philips TVs are powered by the Android TV operating system, which turns traditional TVs into multimedia centers with huge capabilities.
- We place the contactless headphones near the TV and put them in ready-to-connect mode.
- In the Android TV settings, go to the wired and wireless networks section.
To connect Bluetooth headphones to Android TVs, select wireless and wired networks from the Android TV menu
After activating the Bluetooth function, start searching for Bluetooth devices
After searching, the TV should see a Bluetooth device
The type of device is selected. headphones. after which they are connected to the TV
How to connect Bluetooth headphones to the TV through the transmitter
The principle of connecting bluetooth headphones through a transmitter is quite SIMple:
We connect the transmitter cable to the audio jack of the TV.
When connecting headphones via a Bluetooth transmitter, just plug the cable from the transmitter into the TV output under the headphones, and then connect your headset to the transmitter
What is a transmitter
Telecommunication transmitter (transmitter). an electronic device that receives sound from a TV via a cable (TRS connector) and transmits it to wireless headsets via bluetooth.
Bluetooth transmitters. a universal solution for almost any TV, even an old one
The radio transmitter performs the following tasks:
- accepts a digital signal;
- generates it to be read by any bluetooth device;
- pairs with speakers, headphones and other non-contact devices by sending an audio signal to them via radio frequencies.