How to connect audio from a computer to a TV

How to connect audio from a computer to a TV?

If you have a more powerful speaker system in your home TV, you can output sound from the computer to the TV and enjoy your favorite songs in better quality. This procedure is quite simple and does not require any special skills or knowledge.

Modern TVs allow you to reproduce various sound effects, including a surround sound function. They have great speakers or are often connected to a surround sound home theater system. Due to its design, no laptop or desktop PC can boast of such sound quality. And since music files are still stored on a computer, you need to know how to connect sound from a computer to a TV. The main connector for transmitting audio signal is the RCA connector.

This is the connector on your computer’s sound card and connects to headphones or external speakers. The standard marking for such a connector is green (light green). In some laptop models, as well as if the connector is brought to the front panel, for aesthetics, it is not highlighted in color. In this case, a headphone icon may be drawn next to it. The TV has the same connector (s), but the color scheme will be different: here is white for mono audio or left channel stereo audio. The red connector is used to connect the right channel stereo signal.

Almost always next to such connectors on the TV is marked Audio IN (connectors marked Audio OUT are used to output television sound to external speakers). To output sound to a TV using RCA connectors, you need a cable with RCA plugs, popularly called bells or tulips. The number of plugs on the ends of the cable must match the number of connectors on the sound card and TV. Connect the plug (popularly “dad”) with the connector (“mum”) according to the color principle. white with white, red with red.

The opposite end of the cable connects to the headphone output on your computer. After connecting the cable, you need to switch the TV to A / V mode (receive audio and video from external sources), turn on the sound on the computer and enjoy the new sound. If there are several such modes on the TV, then you can find the one you need by simply switching between them. This is the easiest way to transfer sound from your computer to your TV. After all, there are TVs and computer sound cards that support 5.1, 6.1, 7.1 speaker configuration. In this case, the number of connectors will be corresponding.

There are no standard colors for such systems and you have to adhere to the letter designations printed next to the connectors. In a computer, this is the output to the front and rear speakers (RL / RR), the subwoofer and the center speaker (CEN / SUB). On the TV, these will be similar inputs. In this case, the cable must be purchased with the appropriate number of plugs. An easier way to transfer multichannel audio from your computer to your TV is to use the HDMI (High-Definition Multimedia Interface) connectors and cables that come with more modern TVs and computers.

To transmit sound, it is enough to connect the computer and the TV with an HDMI interface cable, and then switch the TV mode by pressing the TV / AV, A / V button or the button with the image of a square and an emerging arrow. If your TV supports multiple modes, find the desired one by brute-force. And then all that remains is to enjoy high-quality sound.

Elimination of possible problems

So, all the above connection algorithm is executed with scrupulous accuracy, but the sound in the TV speakers did not appear. In this case, it is necessary to use the capabilities of the computer device itself. To do this, you need to do the following:

  • Carry out all the above connection steps.
  • Right-click on the speaker icon on the desktop (usually located in the lower right corner of the screen).
  • In the menu that opens, select the item “Playback devices”.
  • On the “Sound” page, activate the item “Playback”.
connect, audio, computer

All devices will be displayed on the screen, both their own (for example, a laptop) and connected (headphones, speakers), including a TV set in the list (you can find out by the model name or the record “Digital Audio”). All that is required of you is to select it by clicking on the “Connect by default” symbol and confirm the actions with the “OK” button. When performing the listed actions, 2 problems are possible:

There is no TV name in the list. click on an empty space next to the list with the right mouse button (if the cable is working properly and is connected correctly, the name should appear) and click on the dropped device designation again.

The TV receiver icon in the list is not active. you should restart the computer without disconnecting the cable and without turning off the TV.
And the last option for activating the procedure for transmitting an audio signal through a cable (performed after all the above procedures) is to check the status and operability of the controller:

  • Through the “Device Manager” you need to enter the “System devices” section.
  • Find the High Definition Audio item and activate it if it is in a disabled state.

Additionally, you should open the section “Audio inputs and outputs”, activate the speaker icon and run the command to update the drivers (respectively, the device must be connected to the Internet at this moment). Sometimes, due to the lack of appropriate system updates, the audio outputs (inputs) may be inactive. The program runs in automatic mode, and to start correctly, you need to perform a complete reboot and activate the sound through the TV.

READ  How To Connect The System Unit To The TV

Choosing a cable for signal transmission

Unfortunately, the corporation (I will not advertise it again in this review) has stopped supporting (updating) the software that allows you to output video and audio signals to Smart-TV in a wireless format. Therefore, do not waste time on useless attempts and start looking for a special cable. The best option is considered to be an HDMI model capable of transmitting a signal in digital quality. When choosing, one should be guided by the following mandatory criteria:

  • Quality and quality again. don’t save money and buy cheap products from China. They may simply not work or distort the sound beyond recognition.
  • The length of the cable. it should be enough with a margin from the connector of the computer device to the corresponding socket of the television receiver.
  • Ensure the presence and integrity of the connectors for this cable format on the TV and PC.

Also, if you have any difficulties in connecting a new device, then our masters will be happy to come and help you install and configure new equipment.

How to Connect PC/Laptop to TV with Audio Sound

Audio cables

The easiest option, if possible. The main options are:

  • Tulip RCA connection.
  • Connection via 3.5 mm jack.

Do not forget that there is a special mode on the TV for receiving data via RCA (by analogy with an antenna, flash drive, HDMI). Those. no sound from the computer will be played in antenna reception mode!

On this I say goodbye to you. Remember open comments and ask helpful questions!

How to connect audio from a computer to a TV

In this article, we will teach you how to output sound from a computer to a TV.

There are much more possibilities now than ever before, every modern TV can be used as a larger monitor, a very convenient solution for many users. There are many different options for connecting a computer to a TV, but everything will depend on the presence of one or another connector on your TV.

Setting the beep

To play an audio signal transmitted through a connected cable by a computer device to a television receiver, you must open the corresponding settings menu in the latter:

  • Select the section sound settings.
  • Activate as source the signal view coming from the HDMI jack.

Some TV models may have several similar outputs. Each of them has its own designation (usually digital), it is imperative to activate the one to which the cable is connected.

connect, audio, computer

If all connections and settings are correct, the sound file running on the computer should play through the TV. In this case, the volume can be adjusted both on the PC (speaker icon on the desktop), and using the TV remote control or the corresponding buttons of the receiver.

Basic methods on how to connect audio to TV from a computer

There are several ways to connect sound to a TV from a computer, the choice of the optimal one depends on the equipment of the equipment with certain connectors.

The main method is how to connect audio to a TV from a computer. When transmitting sound through this cable, difficulties very rarely arise, and the audio signal quality is very high. The most optimal option for new TV models. HDMI cable often comes in a set with various TV and audio equipment, and you can also purchase it separately.

  • Disconnect the computer and TV from the mains.
  • Connect the cord to both devices.

This option does not require additional settings, it is enough to select the HDVI output as the sound source on the TV.

But, if there is no sound, it is recommended to set the TV as the main sound source on a personal computer.

  • Select the sound icon with the right mouse button, then select the “Equipment for playback” tab from the list of devices that appears, select your technique.
  • Using the computer mouse key, click on the selected option, and check the box next to the “Default” tab.

The procedure is performed with equipment connected to each other. In the event that the HDMI cable is connected to the devices, but the PC does not see it, then you should reboot.

Another popular way to switch audio from a personal computer to a TV. There are three types of connectors:

  • Analog connector.
  • Digital jack.
  • Combo connector.

With this type of setting, the computer video card must necessarily support the audio format via DVI. Scheme:

  • In the TV settings menu select DVI signal converter.
  • Connect the cord with devices.

This scheme for outputting sound from a computer to a TV is recommended only if the device cannot transmit a signal via DVI. Usually this method is used on outdated hardware.

It is a common occurrence that the VGA connector is occupied by the PC screen, so switching can only be done with a special adapter, and then a VGA cable is connected.This transfer option is considered the most difficult and expensive.

This method is only possible if the TV has DLNA support, and you also need a media player. All modern panels support DLNA, so this method can be considered an alternative to sound transmission via HDMI. With this option, the connected screen works directly with PC files. Scheme:

  • Make sure that the plasma panel has a module for distribution via WI-FI connection.
  • Turning on devices.
  • DLNA Server Installation and Configuration.
  • In the TV menu settings, select the “WIRELESS CONNECTION” tab.
  • To transfer sound to TV, you need to download a special computer application called a media server.
  • To transmit audio sound, the user must open this program and select “Ethernet”.

The best option is to transmit the audio signal to older TVs. This cord is often called “TULIP”, it has three branches, the red jack is responsible for the sound from the right, the yellow one is the left sound, and the white one is the video signal. Scheme:

  • Disconnect all appliances from the power supply.
  • In the PC settings, you should expand the parameters of the computer monitor to fit the TV screen.
  • Switch TV to “VIDEO” mode.
READ  How to split audio between TV and computer

Of all the listed methods of sound transmission, HDMI and Fi-Wi are considered the best. Because they provide high sound quality and reliable equipment operation.

Laptop and TV

Instructions on how to output sound from a laptop to a TV. User need to purchase HDMI to HDMI cable or JACK – 2RCA cable.

Basic methods on how to connect audio to TV from a computer

There are several ways to connect sound to a TV from a computer, the choice of the optimal one depends on the equipment of the equipment with certain connectors.

The main method is how to connect audio to a TV from a computer. When transmitting sound through this cable, difficulties very rarely arise, and the audio signal quality is very high. The most optimal option for new TV models. HDMI cable often comes in a set with various TV and audio equipment, and you can also purchase it separately.

  • Disconnect the computer and TV from the mains.
  • Connect the cord to both devices.

This option does not require additional settings, it is enough to select the HDVI output as the sound source on the TV.

But, if there is no sound, it is recommended to set the TV as the main sound source on a personal computer.

  • Select the sound icon with the right mouse button, then select the “Equipment for playback” tab from the list of devices that appears, select your technique.
  • Using the computer mouse key, click on the selected option, and check the box next to the “Default” tab.

The procedure is performed with equipment connected to each other. In the event that the HDMI cable is connected to the devices, but the PC does not see it, then you should reboot.

Another popular way to switch audio from a personal computer to a TV. There are three types of connectors:

  • Analog connector.
  • Digital jack.
  • Combo connector.

With this type of setting, the computer video card must necessarily support the audio format via DVI. Scheme:

  • In the TV settings menu, select the DVI signal converter.
  • Connect the cord with devices.

This scheme for outputting sound from a computer to a TV is recommended only if the device cannot transmit a signal via DVI. Usually this method is used on outdated hardware.

It is a common occurrence that the VGA connector is occupied by the PC screen, so switching can only be done with a special adapter, and then a VGA cable is connected.This transfer option is considered the most difficult and expensive.

This method is only possible if the TV has DLNA support, and you also need a media player. All modern panels support DLNA, so this method can be considered an alternative to sound transmission via HDMI. With this option, the connected screen works directly with PC files. Scheme:

  • Make sure that the plasma panel has a module for distribution via WI-FI connection.
  • Turning on devices.
  • DLNA Server Installation and Configuration.
  • In the TV menu settings, select the “WIRELESS CONNECTION” tab.
  • To transfer sound to TV, you need to download a special computer application called a media server.
  • To transmit audio sound, the user must open this program and select “Ethernet”.

The best option is to transmit the audio signal to older TVs. This cord is often called “TULIP”, it has three branches, the red jack is responsible for the sound from the right, the yellow one is the left sound, and the white one is the video signal. Scheme:

  • Disconnect all appliances from the power supply.
  • In the PC settings, you should expand the parameters of the computer monitor to fit the TV screen.
  • Switch TV to “VIDEO” mode.

Of all the listed methods of sound transmission, HDMI and Fi-Wi are considered the best. Because they provide high sound quality and reliable equipment operation.

JACK – 2RCA

  • Turn on laptop and LCD panel.
  • After loading the laptop’s OP, open the sound setting program.
  • Select the type of system “FRONT SPEAKERS”.
  • In the TV menu select the “SOUND SOURCE” tab.
  • Open the player and turn on any music composition.
  • Perform equalizer setting.

HDMI-HDMI

  • Connect laptop and plasma using HDMI cable.
  • In the panel settings, specify HDMI as the main source of signal transmission.
  • In the laptop, open the control menu and go to the “EQUIPMENT AND SOUND” section.
  • Select the link “Control of sound devices”, in the section “Playback” the item “DYNAMIC” should be activated.
  • Click on the HDMI Output icon, select “PROPERTIES”, activate the “Use this device” tab.
  • In the previous menu activate “DEFAULT”.
  • Run any music track to check if the sound is working.
  • Configuration complete.

Connecting speakers to a TV through a tape recorder or radio tape recorder

If there is a music center or other musical device next to the TV, then you can consider another option, how to connect the TV to speakers that will produce a very decent sound.

To do this, we connect both devices with a cable. a TV and a tape recorder, a radio tape recorder, a music center. And the sound output device itself is connected to the speakers.

The connection is made with the cable used with the recorder through the aforementioned cinch or TRS jacks. If you can’t connect the devices together, most likely you need to use an adapter. Note that the audio signal is output from the TV, so the connection is made to the connector responsible for the output, marked OUT. Accordingly, the cable must be connected to the radio or the center through the input connector. In order not to get confused in the location of the “entrance” and “exit”, use the instructions supplied with the devices.

  • How to connect iPad to TV via USB, Wi-Fi or AirPlay.
  • How to connect audio from a computer to a TV via HDMI, DVI, VGA, Wi-Fi and other methods.
  • How to choose a TV and not waste your money?
READ  Connect phone to TV via wi-fi Samsung

We connect the units of the passive type

The difference between passive and active systems is the absence of power amplifiers. Is it possible to connect such equipment to a TV with a cable or not? First, you need to connect passive speakers to your chosen amplifier. And already he, in turn, is connected directly to the TV.

Be sure to check the following nuance. according to the specification, the power parameter of the amplifier must be at least 30% of the same parameter of the speakers. And the wire for them must be selected so that its cross-sectional area is at least 1 square centimeter. However, the thicker the cable is chosen, the higher the reliability of the connection.

It is also necessary to check the output impedance of the amplifier. It should be nominal, and this parameter should correspond to the impedance of speakers from a home theater or other device. The polarity parameter is also respected, namely. the left channel must be connected to the left speaker, while the right channel must be plugged into the corresponding socket of the right speaker. If Honor does not have this parameter and do the opposite, the sound level will be slightly worse.

When it is necessary to connect a stereo system consisting of several passive speakers, a special AV-class receiver is used for connection, for which an additional cable will be required. This is one of the easiest ways to connect speakers to your TV.

Another option for how to connect the speakers to the LCD TV correctly is using the HDMI connector. With its help, you can get a much higher quality sound, so if it is available, it is better to connect through it.

We connect speakers to the TV easily and quickly

Sometimes the sound from the built-in speakers when watching movies is not enough. How do I connect speakers to my TV to make the sound louder? Consider the main nuances of connecting.

Connecting active equipment

There is not enough room in the design of the television set to accommodate decent speakers. Therefore, in most cases, it is enough to connect any external device that allows you to play sound, and you will immediately notice the difference. It can even be equipment from a personal computer or laptop. Therefore, to the question of how to connect computer speakers, there will be the same answer as for other active type equipment.

Additional external active speakers connect to any TV. It should be noted right away that they are connected to the TV using a specially located socket. Such equipment is called active because an additional powerful amplifier is installed in it. It is available in any active speaker system, even in speakers from a computer.

This allows for an easier connection option, since such large and small speakers do not require an amplifier. They are powered via a regular network, so no additional connections are required either. What is convenient. external speakers can be connected to the TV directly without adapters and other devices.

There are many different jacks on the panel at the back of the TV, but to understand which ones are needed, they must be subscribed. Therefore, it is enough to understand English a little and everything becomes clear. Thanks to the installed markings, you can easily determine for what purpose each of the inputs is provided.

To connect your computer speakers to a television or any other device, look for audio jacks that are red and white. This is a generally accepted rule and does not change in different TV models, so it helps to avoid confusion. You need jacks labeled Audio-R, which are white, and Audio-L, which is red.

Speakers that can be connected to the TV, whether it be computer equipment or an independent speaker system, will need to be connected through special round jacks. The diameter of these sockets will be 3.5 millimeters. They are also called TRS or “mini jack”. You can understand how correct the socket you have found by the installed headphone icon, which is mandatory for each system and configuration.

That the TV, that the computer must have the same socket, which allows you to understand how to connect to these devices, any acoustics system selected for operation.

On old-style TVs, manufacturers arrange special tulip connectors instead of the small ones like on flat screens. To connect a device to them, you need to connect the leads of the corresponding acoustic equipment. If the system does not have the required output, then you can use the adapter supplied with the audio equipment.

Connecting the equipment output to a small stereo system

If the sound quality from the tape recorder does not suit you very much, then you can use a compact system for connection, consisting, for example, of a pair of speakers and a subwoofer. The resulting sound will be slightly better than when using a standard tape recorder. True, the sound will still be worse than when using a composite stereo system. In fact, this is an average option, although it is quite popular, especially among young people, who usually use relatively inexpensive equipment.

The connection is made via the Scart connector on the back of the device. For these purposes, an adapter such as a tulip or a mini-jack is perfect. True, it is impossible to achieve an improvement in the sound signal when watching analogue channels with this option. Errors will remain anyway.

Connect Computer to TV With HDMI With AUDIO/Sound

Of course, you can leave everything as it is and not connect the speakers to the TV through various devices. But this is a very exciting activity that allows you to get more pleasure from watching not only films and sports programs, in which the sound is surround by default, but also ordinary programs that are so often broadcast on the screen.