How to connect a nintendo switch to a TV

How to Connect and Set Up Nintendo Switch?

connect, nintendo, switch

It’s easy as 1, 2, Switch!

So you’ve bought a brand new Nintendo Switch. We bet you want to turn on your console and start playing, right? Well, we’ve prepared this guide to help you connect and set up your Nintendo Switch.

We understand that you did not plan to put an unpacked box against the nearest wall, and then scratch your head why Zelda is not playing on the TV screen. However, by following our guide, you will be able to walk through the installation process without errors, as quickly and painlessly as possible.

First of all, when you open the box, make sure to open it from the right side, like in the photo, the dock and console should be on top. because we opened the box upside down and the contents spilled out onto the floor, a very unpleasant start to the installation.

If the box is open correctly, you will see the tablet and both Joy-Con controllers. Take them out and set them aside, and then take out the rest of the console, they are located below. Here you will see the dock, wrist straps, power cable, USB-C cable and HDMI connector.

In fact, once you have a game, there is no reason why you shouldn’t be able to connect your controllers to your tablet and start tweaking / playing in handheld mode. However, we recommend installing and plugging in a dock so you can switch your game to your TV without hesitation, setup and connection.

Setting up the dock is simple. All you have to do is pull the panel off the back of the dock, where you’ll find sockets for the power cord, HDMI cable, and an additional USB port for charging any accessories. Connect the power cable and HDMI cable, lead them into special grooves, gently close the plastic panel.

If you want to keep your space in front of the TV tidy, we recommend placing the dock to the right of the TV and running the cables along the back of the TV. The dock routes cables to the outlet on the right, so placing it to the left of the TV will interfere with organizing your workspace.

Once HDMI is connected to the TV and the power plug is plugged into an outlet, the Nintendo Switch Dock is ready to use.

You can now go back to your tablet.

Take your tablet and place Joy-Con’s on each side. We’d advise wearing the controllers alternately instead of balancing the tablet with your stomach in an effort to snap both controllers into place. Not only is it safer, you just won’t hear the really satisfying click that gets blurry when you install two controllers in a row.

On the top of the tablet, you’ll find the console’s power button, far left. Click on it and you will be ready to start configuring the software.!

First of all, you will be asked to select your language and region of residence. Once you have made your choice, you must accept the terms of the end user license agreement. Well, you may not accept, but if you want to use the console, you have to.

Then it’s time to connect the Switch to your local wireless network and select your time zone. After that, the tablet will ask you if you want to dock the device to the docking station and switch to TV mode now or do it later.

Well, you’ve already connected your console dock, so you could start!

Separate the Joy-Con controllers from the tablet by pressing the release button on the back and sliding the controllers up. You can then combine them together to turn the two controllers into a more traditional gamepad.

Insert the tablet into the docking station and, if everything is in order, your TV should display the image from the tablet. If you haven’t seen a picture of your tablet on your TV screen, don’t panic. Make sure the TV is set to HDMI video output mode, and also check that the green light on the bottom left of the dock is on.

Now you can start setting up your user profile, which is as simple as selecting an icon and entering a name. Next, you will be presented with the option to set parental controls, or you can skip this step entirely.

Nintendo Switch connection and setup complete! Press the Home button on the right Joy-Con to go to the home screen of the console.

To start playing your games, simply insert a cartridge (assuming it’s a Zelda) into the space on the top right side of the console. The pitch is the same whether you are playing on the go or on the TV screen. You can now enjoy the appeal and possibilities of your new Nintendo Switch!

If you’re looking for games to add to your collection, head over to our list of the best Nintendo Switch games currently available on your console.

We also recommend considering additional accessories to complement your console. These range from a simple but absolutely essential screen projector to stands that are used in desktop console mode.

To connect your Nintendo Switch to your TV, you need:

All this is included as standard.

How to connect a nintendo switch to a TV

It’s easy as 1, 2, Switch!

So you’ve bought a brand new Nintendo Switch. We bet you want to turn on your console and start playing, right? Well, we’ve prepared this guide to help you connect and set up your Nintendo Switch.

We understand that you did not plan to put an unpacked box against the nearest wall, and then scratch your head why Zelda is not playing on the TV screen. However, by following our guide you will be able to walk through the installation process without errors, as quickly and painlessly as possible.

First of all, when you open the box, make sure to open it from the right side, like in the photo, the dock and console should be on top. because we opened the box upside down and the contents spilled out onto the floor, a very unpleasant start to the installation.

If the box is open correctly, you will see the tablet and both Joy-Con controllers. Take them out and set them aside, and then take out the rest of the console, they are located below. Here you will see the dock, wrist straps, power cable, USB-C cable and HDMI connector.

In fact, once you have a game, there is no reason why you shouldn’t be able to connect your controllers to your tablet and start tweaking / playing in handheld mode. However, we recommend installing and plugging in a dock so you can switch your game to your TV without hesitation, setup and connection.

Setting up the dock is simple. All you have to do is pull the panel off the back of the dock, where you’ll find sockets for the power cord, HDMI cable, and an additional USB port for charging any accessories. Connect the power cable and HDMI cable, lead them into special grooves, gently close the plastic panel.

If you want to keep your space in front of the TV tidy, we recommend placing the dock to the right of the TV and routing the cables along the back of the TV. The dock routes cables to the outlet on the right, so placing it to the left of the TV will interfere with organizing your workspace.

Once HDMI is connected to the TV and the power plug is plugged into an outlet, the Nintendo Switch Dock is ready to use.

You can now go back to your tablet.

Take your tablet and place Joy-Con’s on each side. We’d advise wearing the controllers alternately instead of balancing the tablet with your stomach in an effort to snap both controllers into place. Not only is it safer, you just won’t hear the really satisfying click that gets blurry when you install two controllers in a row.

On the top of the tablet, you’ll find the console’s power button, on the far left. Click on it and you will be ready to start configuring the software.!

READ  How to connect digital TV to toshiba TV

First of all, you will be asked to select your language and region of residence. Once you have made your choice, you must accept the terms of the end user license agreement. Well, you may not accept, but if you want to use the console, you have to.

Then it’s time to connect the Switch to your local wireless network and select your time zone. After that, the tablet will ask you if you want to dock the device to the docking station and switch to TV mode now or do it later.

Well, you’ve already connected your console dock, so you could start!

Separate the Joy-Con controllers from the tablet by pressing the release button on the back and sliding the controllers up. You can then combine them together to turn the two controllers into a more traditional gamepad.

Insert the tablet into the docking station and, if everything is in order, your TV should display the image from the tablet. If you haven’t seen a picture of your tablet on your TV screen, don’t panic. Make sure the TV is set to HDMI video output mode, and also check that the green light on the bottom left of the dock is on.

If it is not, the dock is not turned on, and you should make sure that it is properly connected to the network.

Now you can start setting up your user profile, which is as simple as selecting an icon and entering a name. Next, you will be presented with the option to set parental controls, or you can skip this step entirely.

Nintendo Switch connection and setup complete! Press the Home button on the right Joy-Con to go to the home screen of the console.

To start playing your games, simply insert a cartridge (assuming it’s a Zelda) into the space on the top right side of the console. The pitch is the same whether you are playing on the go or on the TV screen. You can now enjoy the appeal and possibilities of your new Nintendo Switch!

If you’re looking for games to add to your collection, head over to our list of the best Nintendo Switch games currently available on your console.

We also recommend considering additional accessories to complement your console. These range from a simple but absolutely essential screen projector to stands that are used in desktop console mode.

The Nintendo Switch has been around for over a year, but despite this, people still perceive this hybrid console as something unusual. All the same, no one has previously implemented such a hybrid format in this form. And if everything is clear with the portable mode, you turn it on and play, then when you connect to the TV you can get confused.

When connected to a TV, the console starts working at full power, which means that you can get the maximum graphics quality and the most stable frame rate only in TV mode.

In this mode, you can play alone or with friends.

To connect your Nintendo Switch to your TV, follow these steps:

Open the cover on the back of the Nintendo Switch dock.

Insert the HDMI connector and power cord to the corresponding connectors.

Disconnect the Joy-Con controllers from the console if you want to use them with the console in TV mode. It is not necessary to disconnect the joy-cones if you intend to play with the Nintendo Switch Pro Controller.

Align the system and dock, then insert the console. If the console is properly docked, the console screen will turn off.

Turn on your TV and make sure the HDMI input channel is selected. Then make sure the Nintendo Switch screen is displayed on the TV screen.

You have completed connecting your Nintendo Switch to TV mode. Enjoy the games.

In addition, many users complain that the docking station can scratch the tablet screen due to the use of hard materials. However, now a YouTube user with the nickname “Switch It Up” has found a solution to this problem. Obviously, the Nintendo Switch can be docked without being docked. However, the docking station must still be located somewhere nearby.

To implement this idea, you will need an additional USB Type C cable (male connector) and a tablet stand. The latter is mainly needed so that there is enough space around the console for cooling, as well as not to accidentally drop it. The USB cable needs to be pulled from the tablet to the docking station. Due to the fact that the manufacturer did not provide for such a connection option, the cable in the docking station may loose a little, so you need to be careful.

As a result, you can connect your Nintendo Switch to your TV without docking your tablet. This solution should appeal to those users who are afraid of scratching the screen of their Switch. Unfortunately, you can’t connect your Nintendo Switch to your TV with an HDMI-USB-C cable. Other hubs and USB Type C docking stations will not work either. In the future, however, it is possible that some third party will release an alternative to the original Switch dock.

How to Connect and Set Up Nintendo Switch?

It’s easy as 1, 2, Switch!

So you’ve bought a brand new Nintendo Switch. We bet you want to turn on your console and start playing, right? Well, we’ve prepared this guide to help you connect and set up your Nintendo Switch.

We understand that you did not plan to put an unpacked box against the nearest wall, and then scratch your head why Zelda is not playing on the TV screen. However, by following our guide you will be able to walk through the installation process without errors, as quickly and painlessly as possible.

First of all, when you open the box, make sure to open it from the right side, like in the photo, the dock and console should be on top. because we opened the box upside down and the contents spilled out onto the floor, a very unpleasant start to the installation.

If the box is open correctly, you will see the tablet and both Joy-Con controllers. Take them out and set them aside, and then take out the rest of the console, they are located below. Here you will see the dock, wrist straps, power cable, USB-C cable and HDMI connector.

In fact, once you have a game, there is no reason why you shouldn’t be able to connect your controllers to your tablet and start tweaking / playing in handheld mode. However, we recommend installing and plugging in a dock so you can switch your game to your TV without hesitation, setup and connection.

Setting up the dock is simple. All you have to do is pull the panel off the back of the dock, where you’ll find sockets for the power cord, HDMI cable, and an additional USB port for charging any accessories. Connect the power cable and HDMI cable, lead them into special grooves, gently close the plastic panel.

If you want to keep your space in front of the TV tidy, we recommend placing the dock to the right of the TV and running the cables along the back of the TV. The dock routes cables to the outlet on the right, so placing it to the left of the TV will interfere with organizing your workspace.

Once HDMI is connected to the TV and the power plug is plugged into an outlet, the Nintendo Switch Dock is ready to use.

You can now go back to your tablet.

Take your tablet and place Joy-Con’s on each side. We’d advise wearing the controllers alternately instead of balancing the tablet with your stomach in an effort to snap both controllers into place. Not only is it safer, you just won’t hear the really satisfying click that gets blurry when you install two controllers in a row.

On the top of the tablet, you’ll find the console’s power button, far left. Click on it and you will be ready to start configuring the software.!

First of all, you will be asked to select your language and region of residence. Once you have made your choice, you must accept the terms of the end user license agreement. Well, you may not accept, but if you want to use the console, you have to.

READ  How To Connect To TV Via Phone

Then it’s time to connect the Switch to your local wireless network and select your time zone. After that, the tablet will ask you if you want to dock the device to the docking station and switch to TV mode now or do it later.

Well, you’ve already connected your console dock, so you could start!

Separate the Joy-Con controllers from the tablet by pressing the release button on the back and sliding the controllers up. You can then combine them together to turn the two controllers into a more traditional gamepad.

Insert the tablet into the docking station and, if everything is in order, your TV should display the image from the tablet. If you haven’t seen a picture of your tablet on your TV screen, don’t panic. Make sure the TV is set to HDMI video output mode, and also check that the green light on the bottom left of the dock is on.

If it is not, the dock is not turned on, and you should make sure that it is properly connected to the network.

Now you can start setting up your user profile, which is as simple as selecting an icon and entering a name. Next, you will be presented with the option to set parental controls, or you can skip this step entirely.

Nintendo Switch connection and setup complete! Press the Home button on the right Joy-Con to go to the home screen of the console.

To start playing your games, simply insert a cartridge (assuming it’s a Zelda) into the space on the top right side of the console. The pitch is the same whether you are playing on the go or on the TV screen. You can now enjoy the appeal and possibilities of your new Nintendo Switch!

If you’re looking for games to add to your collection, head over to our list of the best Nintendo Switch games currently available on your console.

We also recommend considering additional accessories to complement your console. These range from a simple but absolutely essential screen projector to stands that are used in desktop console mode.

Additional HomeSpot features

Yes, with this adapter you can connect more than just Bluetooth headphones to the Switch. Firstly, through HomeSpot, you can connect not one, but two wireless headphones at once to the console, including two pairs of any Airpods (therefore, the adapter has two buttons), and play without laces and with normal sound not one, but two.

Secondly, HomeSpot is equipped with a built-in microphone. True, it was made for a reason. The fact is that the adapter supports the built-in microphones of the headphones and headsets in the “HFP” mode, which so far functions only in the form of “beta”. But it functions and turns on as follows:

  • go to the main Switch screen;
  • connect the adapter to the console, press and hold the P2 button until the indicator flashes red;
  • connect the headphones as usual. their microphones will be “seen” by HomeSpot automatically.

Thirdly, the adapter supports aptX technology (by the way, Airpods DO NOT support it), that is, the sound via the Switch’s Bluetooth channel will be reproduced not only better, but also with a minimum delay, which, as we know, is very important in the game. Well, if suddenly the Airpods microphones do not want to work normally, then you can always switch to the adapter microphone.

How to connect Airpods to Switch via HomeSpot adapter

So, first we just plug HomeSpot into either the USB-C port of the Switch or the USB-A port of the docking station. After that, we transfer the device to pairing mode, and for this we press and hold the P1 or P2 button for 3 seconds. The adapter will signal that the pairing mode is on by flashing indicators.

Next, we transfer the headphones to pairing mode:

  • Airpods and Airpods Pro. put in the case, don’t close the lid, press and hold the case button until the indicator starts blinking white;
  • Airpods Max. take out of their Smart case, press and hold the noise control button until the headphone indicator starts blinking white.

We wait a couple more seconds, and after HomeSpot picks up the Airpods signal, pairing will be done automatically. Your Switch now plays high-quality audio on wireless Airpods as well as iPhones or large consoles. But that’s not all!

How to connect Airpods to Nintendo Switch and a whole bunch of other things

The Nintendo Switch console, neither with Airpods, nor with other Bluetooth headphones and other Bluetooth devices, simply does not work, as you know. it does not have such an option.

Therefore, you can connect Airpods, Airpods Pro or Airpods Max to the Switch, but only through a special Bluetooth adapter.

over, Nintendo itself has been stubbornly not releasing such adapters since 2017, despite the fact that the current solution has long been overripe. And it does not release, most likely, so that another Bluetooth channel does not interfere with the work of joycons, which also interact with the console via Bluetooth 4.1.

But since there is demand, this does not mean that other manufacturers do not notice it.

Therefore, if you want to connect Airpods or other Bluetooth headphones to Switch, then you just need to choose the right adapter for the console. Fortunately, they are not so difficult to find and they are not so expensive. For example, here

HomeSpot Bluetooth Transmitter

Let’s say right away that this is not necessarily this one (you can access similar devices on Google in a couple of minutes), but this one has very interesting advantages:

  • the device is designed specifically for the Nintendo Switch, therefore it is easy to connect to the console, does not interfere and in general looks normal;
  • connects both directly to the USB-C port of the console and to the USB-A port of the docking station (but only through adapter 0 it is included in the package);
  • the model supports Bluetooth 5.0, which has a very positive effect on the sound quality;
  • an adapter is available in a bunch of different design options, so it’s also fun;
  • there are also additional functions (see below about them).

How to connect a bunch of other things to Switch?

Everything listed above applies to regular HomeSpot. And there is also the HomeSpot Pro (LINK) model, with which Discord, Nintendo Online, WhatsApp and FaceTime messengers, as well as audio services Spotify, Apple Music, YouTube Music and others will work on your Switch, plus a separate equalizer for fine-tuning the quality of music.

Ways to Connect a Nintendo Switch Pro Controller

You might be surprised to know that the Nintendo Switch Pro controller can connect via Bluetooth. If this is news to you, you might be pleased to know that this also applies to the Joy-Con controllers, allowing you to use Switch Joy-Cons on Windows, Mac and Andro.

How to use Switch Joy-Con Controllers on Windows, Mac and Android

How to use Switch Joy-Con Controllers on Windows, Mac and Android
The new Nintendo Joy-Con controllers for the Switch use Bluetooth, meaning you can connect them to Windows, Mac and Android devices.
Read more

This way, if your PC or Android phone has a Bluetooth adapter, you can connect a Nintendo Switch Pro controller to it. Even if you don’t have Bluetooth, you can still use a USB cable to connect the controller directly to your PC.

The Bluetooth method gives you the freedom to use it wirelessly, but it’s a little tricky to set up. If you choose the wired option, you have to sit in front of the computer, but the work is easier.

How to Connect Your Pro Controller to a Nintendo Switch

When you’re done playing games and want to use your Nintendo Switch again, you will notice that your controller will no longer communicate with your console. When you paired your controller with a PC or Android device, it became unpaired with a Nintendo Switch.

READ  How To Make A Remote Control For A TV From A Smartphone

Thus, the console and controller do not communicate with each other, as the controller is now listening to the computer or phone and not the Nintendo Switch. Fortunately, this is a simple solution.

How to connect a Nintendo switch to a computer

In Production on all computers of our social. network)

What I love about Nintendo Switch controllers is the choice of interface for wirelessly interacting with the controllers with the console. So. this is standard Bluetooth technology. You will say that this is rather a minus, since the range of bluetooth operation leaves much to be desired, but you are seriously going to play a FullHD game at a distance of more than 5 meters from the TV, or on an airplane you want to put the console on the shelf next to your seated friend, and you yourself are sitting through 3 rows to play Skyrim? But the advantages of this solution are much more weighty: you can easily use the official console controllers on PC, Mac and even Android devices. By official I mean Joy-Cons and Switch Pro Controller, the latter of which is purchased separately for 4500 /. rubles, depends on the combat color, but it’s worth it. And all you need to use these controllers on a PC is a Bluetooth receiver (if you don’t already have Bluetooth built in).

HOW TO CONNECT JOY-CON CONTROLLERS
You can easily connect Joy-Con controllers to your Windows or Mac computer directly from the Bluetooth menu. To do this, follow these steps.

Disconnect the Joy-Con from the Switch as usual.

Hold down the sync button on the Joy-Con, which is located between the SR and SL buttons, until the LEDs flash. Use the image below if you need further clarification. Find the Joy-Con in your computer’s Bluetooth menu and select the option to pair it with your device. There are some quirks, like the fact that the twin lights on the Joy-Con never stop flashing. However, you can verify that the controller is connected by looking at your computer’s Bluetooth settings. If you see the error message below, move the controller to a different location so other devices don’t interfere with the signal. Then try again. Unfortunately, the two Joy-Con’a will be considered separate controllers by default. This is great for multiplayer games, but makes Joy-Con’s useless for games with complex controls like first person shooter (Why would you use a controller to play a shooter on a computer?).

There is also a rather complex workaround for syncing a pair of Joy-Con’s together as a single controller. It includes several external programs and some processing, so we think the process we described is the best way. If you’re curious, follow the steps outlined by Reddit user Jayzizzle1234 at.

HOW TO CONNECT SWITCH PRO CONTROLLEP TO STEAM
The Steam Beta client now officially supports the Switch Pro Controller, giving you the ability to use it across all your games and even reconfigure its buttons if you see fit.

Download the Steam Beta Client and go to the Controller Settings menu on Steam. From here, you can check for Switch Pro Controller support and enable “Use Nintendo Button Layout”, which changes all of your games’ button prompts to match the Pro Controller. If you leave it as it is, the A / B and X / Y buttons will be set the other way around like on Xbox One.

Then plug in your Switch Pro controller using a USB cable and you’ll be asked to register it, as well as calibrate the built-in gyroscope for motion control in certain games.

Once you’ve done that, select “controller configuration” and you can set the function of each button and insert it on the controller, make pre-configured configurations for specific games, or choose your own community member configuration by pressing the X button. If you like, you can bind the gyro sensor to a specific function, which can allow you to be almost as accurate as mouse and keyboard players in certain games.
HOW TO CONNECT THE SWITCH PRO CONTROLER VIA BLUETOOTH
If you’re not using Steam, you can also connect the Pro Controller directly to your Windows or MacOS computer via Bluetooth. This method is a little more complicated than connecting via USB, so we only use this method when you plan to use the Pro Controller with games on another platform such as EA Origin, Ubisoft’s UPlay store and Battle.Net.

Like the Joy-Con controllers, you use Bluetooth to connect the Pro Controller to a desktop PC or alternative device. The steps are essentially the same as connecting Joy-Con’s, so check the above points for clarification. The sync button for the Pro Controller is located at the top of the controller, directly to the left of the USB-C connector.

The Pro Controller should be more convenient for a wider range of games than Joy-Con’s, namely because it has a more traditional layout, although not compatible with all games. This is due to the use of the controller APIs; The Pro Controller appears to be using DirectInput and not the new XInput API, making it incompatible with many new games.

One way to get around this is to download the free x360ce program, which translates DirectInput commands for games into XInput. It was specially designed for Xbox 360 controllers, so the x360ce recognizes the Switch Pro Controller.

Nintendo Switch Pro controllers aren’t cheap, but they have excellent build quality and feel great when playing games. What’s more, they can be used on PC and Android, making the Nintendo Switch Pro Controller a great all-round controller for your gaming needs.

Here’s how to use the Nintendo Switch Pro Controller on PC and Android.

Pairing with Nintendo Switch via Bluetooth

If you want to connect it wirelessly, boot up Nintendo Switch and navigate to the Controllers menu on the Home page.

Find and select the Change clutch and order option.It asks you to press the L R buttons on your chosen controller, but this only works if it is paired.

Since you haven’t reprogrammed the Pro controller yet, ignore this command and hold the large button on top of the controller instead; the same one used to connect the controller to a PC via Bluetooth.

As you hold it for a few seconds, you should feel its vibration. If it doesn’t appear right away, try pressing L R to see if it reconnects.

Using the Nintendo Switch Pro Controller with Other Games

If you want to use it on games that aren’t on Steam, things get even more complicated. You will need software such as XInput to correctly map your controller inputs to in-game actions. This Reddit thread offers some useful drivers for the Pro Controller to work, so be sure to check it out if you don’t want to install it manually.

How to Connect a Nintendo Switch Pro Controller to Android via Bluetooth

To use the controller on your phone, first activate its Bluetooth. You can usually find Bluetooth in the settings of the app, under Wireless & networks or Connected devices, depending on your Android version and phone build. Search for nearby devices on your phone, then press and hold the large button on top of the Pro controller next to the USB port.

Once the Android phone detects the controller, it will display the Pro Controller in its list of discovered devices. Click on it to connect and you’ll be ready to play.

How to Connect a Nintendo Switch Pro Controller to a PC Using a USB Cable

If you want to use a USB cable, the steps are simple. You would receive a USB cable with a Pro controller in the box. Connect one end of this cable to your controller and the other to a USB port on your PC.

If you’re using Windows 10, it should automatically detect and configure your Nintendo Switch Pro controller. You will know that everything went well when the computer tells you to install the driver. What’s more, you can charge the batteries while you play, ready for your next Nintendo Switch use.