How to connect a harper set-top box to a TV

How to set up a Smart set-top box to your TV?

Setting up a Smart-TV box is mainly about connecting it to the Internet. This can be done in two ways:

Making the stupid smart: how to connect a Smart set-top box to a TV

connect, harper, set-top

We will tell you how to turn your ordinary TV into a Smart TV by connecting a set-top box to it.

Want a Smart TV, but don’t want to buy a new TV instead of a gorgeous LCD panel? Not a problem: just connect a smart set-top box to your TV. This article will show you how to make a Smart TV out of a regular TV. And here we have a good selection of Smart consoles for 2019. choose your taste and wallet.

How to connect a Smart set-top box to a TV?

Connecting the set-top box should not cause any difficulties even for inexperienced users. After all, all you need to do is connect the box to the TV with a cable. To do this, do the following:

  • Turn off the power to both devices. If the set-top box does not have its own plug in the outlet, then disconnect only the TV. It is generally better to pull the plug out of the socket for reliability. The HDMI interface, through which the set-top box is connected to the TV, often burns out if you connect two devices, each of which has its own power source.
  • Take the HDMI cable that came with the set-top box and insert it one end into the corresponding connector on the set-top box, and the other end into the HDMI connector on the TV. If the set-top box is connected via USB, insert the USB cable.
  • What if the TV is old and doesn’t have HDMI? An HDMI-AV converter can be purchased. Such a box costs about 1.5 thousand rubles, but even if you bought your box in the 90s, it allows you to make Smart-TV out of a TV. In this case, you first need to connect the converter to the TV using “tulips”, and then connect the set-top box through it with an HDMI cable. The converter looks something like this: Look at Yulmart
  • Turn on both devices.

After that, you can start configuring the prefix.

How Smart TV Box Works?

Smart set-top boxes are designed for one purpose: to make a Smart-TV out of a simple TV. To do this, they all allow you to connect your old TV box to the Internet. They are divided into three types:

    Dongle for connecting a smartphone. This is a mini-device resembling an ordinary USB flash drive with a USB or HDMI connector. It supports one of the technologies for connecting a smartphone to a TV (Miracast, DLNA, AirPlay). here in this article we described in detail how to connect a smartphone to a TV. The principle of its operation is that it broadcasts the content that you find on your smartphone to the TV screen. through a special application or by screen mirroring.

Via Wi-Fi

The advantage of this method is that it is supported by literally all Smart-TV set-top boxes, as it is a standard. The connection procedure may differ from device to device, but is generally the same. To connect via Wi-Fi, do the following:

  • Enter the STB menu in any way possible. For example, by pressing the Menu button on the remote control.
  • In any way available in the menu of your set-top box, go to the network settings and turn on the wireless network. For example, move the Wi-Fi activation slider, or use the remote control buttons to select the type of connection (wireless).
  • After a while, a list of available Wi-Fi networks will appear. Select yours, using, for example, the “left-right” or “up-down” buttons on the remote control and press OK (the Connect button) to connect to it.
  • Next, you need to enter the network password. we hope you have it. Quite an annoying procedure if you use the remote control: you have to “run” with the “up-down” and “left-right” buttons on the on-screen keyboard, typing letters. By the way, for those who are especially nervous: many Smart-TV set-top boxes with a USB input are compatible with a regular computer mouse. You can connect it to the set-top box and the setup process will go more fun.
  • Click Connect (OK, Finish, your option), and the set-top box will connect to your wireless network. After that, you can start working with it.

Via Ethernet

A number of set-top boxes support cable connection. Thus, they can be connected to a router via a local network with an ordinary piece of RJ-45 cable. And this is a good way, because we will never tire of repeating: no wireless connection can be more stable than a wired one. With the cable, you will have a guarantee that the picture on the TV will not be interrupted or, for example, lag behind the sound.

To connect via wire, if supported by your set-top box, do the following:

  • Insert the LAN cable with one end into the port on the set-top box, with the other into one of the ports on the router. Of course, it is better that they are located close to each other. read our material on how to properly install a router.
  • In any way, enter the set-top box menu and find the network settings. For example, you may have a menu item “Network”. “Network Settings”.
  • Select the type of network. Cable (Wired connection, your option).
  • Click Connect (OK, Done, your option).

No password is required. As you can see, using a cable to turn a regular TV into a Smart TV is much easier.

However. this is only the beginning, then it’s up to you. How you will turn your TV into a “smart”. the choice is yours. Whether you connect it to a smartphone, as we recommend, install applications and games through the menu of the set-top box itself, or will you watch online TV through the built-in browser. there can be no universal instructions.

No signal

The missing signal most often occurs when:

  • the device is not connected to the power supply;
  • power switch not turned on.

Check if you forgot to connect the device to the outlet, if the plug is firmly inserted.

Basic operations

Tuner Orbit is available in a wide range of models. DVD T2 Orbita HD 911 is a digital receiver that combines the functions of a tuner and a media player. Made in a metal case, has a built-in power supply. Models HD 924, HD 910, HD 925 are suitable for almost any TV. Supports USB sticks, HD quality audio and video files. Allows you to use the Internet, YouTube, PTV. Thanks to these devices, you can record a video or part of it on a USB flash drive, view photos. And also set parental controls. passwords for channels that are not designed for children.

READ  How to connect a computer to a Samsung TV

How to connect and configure digital channels on the Orbita set-top box

How to connect and configure a digital set-top box Orbit?”. a popular question among TV users, since Russia is switching from analogue to digital television. Connecting the set-top box does not take much time and does not pose any particular difficulties. That is, each user can independently configure the device, without calling the wizard. How to do it in this article.

Poor image quality

If the signal is broken, it is most likely that the antenna cable is not properly connected. Check if the antenna plug is in the correct connector, if it fits snugly.

On the territory of Russia, digital terrestrial television is rapidly replacing analogue. A better picture, excellent sound and additional functions speak in favor of such a transition and the advisability of buying a set-top box.

How to connect the Orbit prefix to an old TV

You can watch digital TV through the Orbita prefix on old TVs. But keep in mind that older models have a limited number of available channels for viewing. As a rule, there are no more than 6. The rest will have to be adjusted independently by rotating the wheel.

Connecting the device

First, the user needs to connect the set-top box to the TV. To do this, follow these steps:

  • connection from a router to a set-top box;
  • HDMI connection to TV;
  • switching on the TV to the corresponding digital channel (HDMI);

And most importantly, after that, do not forget to turn on the TV and the set-top box to the sockets.

Channel search

To activate channel search, you must:

  • open the menu;
  • go to settings;
  • select the name of the country in the proposed list;
  • select the signal type. DVB-T2;
  • confirm automatic settings;

Then wait a few minutes while the receiver automatically searches for available channels.

If, as a result, no channel is displayed, then you will have to search manually. Follow the same steps, only select “Manual Search”. You must specify the broadcast frequency. To refine the indicator, find what frequency is available for the city in which you are.

The channels can be sorted if desired. To do this, go to “Settings” / “Sort channels”.

  • Select the desired channel, confirm the selection.
  • Use the Up / Down buttons to move it to the desired location.
  • Press OK to fix the channel at the selected position.

If you accidentally moved the channel to the wrong place, press F3 on the remote control. The system will automatically display the initial data.

Image Adjustment

To set up a high-quality picture of a 20-channel set-top box, it is advisable to first check the data by pressing the INFO button. The following inscriptions inform about poor quality:

If you have any questions or complaints. let us know

  • signal rate less than 60%;
  • the receiver picks up a bad quality signal.

After installing the problems, try one of the following solutions:

  • point the antenna towards the repeater tower;
  • use special signal power amplifiers.

As a result, channels should be displayed in high quality without lags.

How to connect a harper set-top box to a TV

Today we take a look at the Harper HDT2-1110 digital TV receiver and its brother

HDT2-1110. The set-top box receives a DVB-T2 (Digital Terrestrial TV) signal to a regular antenna.

The receiver also has a media player that supports most modern formats.

With the help of the set-top box, you can easily record any television programs, concerts, football matches and your favorite films that are on the air.

It can be connected to both old and modern TVs.

The Harper 1110 comes in the following packaging:

The kit includes: the receiver itself, a 5V power supply, a multifunctional remote control, batteries for the remote control, a cable for connecting to a TV, an instruction manual and a warranty card (12 months warranty).

The receiver is made of plastic, the assembly is neat and of high quality.

On its front panel there is an LED (light bulb) that glows green if the receiver is on and red if it is off.

Also on the front panel there is a USB port for a flash drive or external hard drive.

You can view from a flash drive or record video files on it.

On the side panel, on the left, there is an input for an external infrared sensor.

It is not included in the kit, and it is not necessary for the receiver to function properly.

With its help, you can hide the attachment in a secluded place, if conditions do not allow to place it in a conspicuous place.

You simply plug in that infrared sensor and only output it. It must be installed in a place where it can receive signals from the control panel.

On the back panel there is an antenna input, 3 outputs for connecting to old TVs (white, red. sound, yellow. video), an HDMI cable output for connecting to modern TVs and an input for a power supply.

We figured out the set-top box itself, now we turn to the channel settings and the menu overview.

We connect the set-top box to the TV. Press the power button on the remote control.

The LED should turn green.

Read the continuation of the receiver review in the second part of the article.

Today we take a look at the Harper HDT2-1110 digital TV receiver and its brother

HDT2-1110. The set-top box receives a DVB-T2 (Digital Terrestrial TV) signal to a regular antenna.

The receiver also has a media player that supports most modern formats.

With the help of the set-top box, you can easily record any television programs, concerts, football matches and your favorite films that are on the air.

It can be connected to both old and modern TVs.

The Harper 1110 comes in the following packaging:

The kit includes: the receiver itself, a 5V power supply, a multifunctional remote control, batteries for the remote control, a cable for connecting to a TV, an instruction manual and a warranty card (12 months warranty).

The receiver is made of plastic, the assembly is neat and of high quality.

On its front panel there is an LED (light bulb) that glows green if the receiver is on and red if it is off.

Also on the front panel there is a USB port for a flash drive or external hard drive.

You can view from a flash drive or record video files on it.

On the side panel, on the left, there is an input for an external infrared sensor.

It is not included in the kit, and it is not necessary for the receiver to function properly.

With its help, you can hide the attachment in a secluded place, if conditions do not allow to place it in a conspicuous place.

You simply plug in that infrared sensor and only output it. It must be installed in a place where it can receive signals from the control panel.

On the back panel there is an antenna input, 3 outputs for connecting to old TVs (white, red. sound, yellow. video), an HDMI cable output for connecting to modern TVs and an input for a power supply.

READ  How to enable iPhone to connect to iTunes

We figured out the set-top box itself, now we turn to the channel settings and the menu overview.

We connect the set-top box to the TV. Press the power button on the remote control.

The LED should turn green.

Read the continuation of the receiver review in the second part of the article.

The state program for the gradual transition to the digital TV broadcasting standard DVB T2 is approaching the final stage. a gradual reduction in the number of analogue repeaters. This suggests that the time has come to join new technologies and switch to digital. We will tell you about the equipment required to receive a television signal in a new format, as well as how to properly connect a digital set-top box (receiver) to a TV or monitor.

Connectors and their purpose

There are various connectors on the back of the device, we will briefly tell you what they are for.

Fig 3. Connectors of the SDT-96 receiver from the SUPRA model range

  • Antenna output.
  • Connector for connecting a satellite dish, decimeter antenna or local provider cable.
  • HDMI cable jack, allows you to connect a monitor or TV equipped with such an input (digital output can transmit sound and image).
  • Tulip sockets (transmits analog video as well as stereo sound).

Some devices may be additionally equipped with a “SCART” connector, which connects to a TV, VCR or DVD-player with video recording function.

Receiver with SCART connector

In addition, there may be devices where, instead of the HDMI jack, D-SUB (Fig. 5) or DVI outputs are installed.

Fig 5. Digital set-top box with standard VGA (D-SUB) output

Please note that such interfaces do not transmit sound, therefore, an additional connection using “tulips” will be required to transmit it.

Connecting to an old TV

The signal converter can work even with old models of television receivers when connected to the antenna output (1 in Fig. 3). To do this, you need a piece of antenna wire of the appropriate length and two antenna plugs. In order not to bother with soldering, you can take special F-connectors, the procedure for installing them on the cable is shown in Figure 8.

Mounting on an F-connector cable

  • We remove the insulation from the antenna cable, carefully so as not to damage the braid (it is enough to clean 15 mm).
  • Bend the braid as shown in the picture.
  • Carefully remove the insulation from the central core.
  • You need to strip 10 mm of the center wire.
  • We screw the connector clockwise.
  • We do this until the central core protrudes 2 mm from the connector.

Using the manufactured cable, we connect the antenna input of the TV to the corresponding output of the set-top box. In this way, you can connect any TV, be it Horizon 101 or the legendary KVN.

The process of connecting a digital set-top box to a new TV step by step

Important! All manipulations must be done with the equipment turned off. If you connect a working equipment, there is a high probability of its failure.

Let’s describe the order of our actions:

  • It is necessary to select the interface for connecting the set-top box to the TV. It can be analog (tulips, D-SUB, SCART) or digital (HDMI, DVI). The choice is made depending on the specific TV model. Despite the fact that many television receivers of the Full HD class have an analog input, it is better to feed them “digital”, since double conversion of the signal will negatively affect the quality of the “picture”.

HDMI input on TV

This interface allows video and sound transmission, so the connection can be made with one cable.

If the TV does not have a digital input, it connects to any analog interface, the easiest way to do this is with tulips. In the event that the device has only a bulky SCART connector, you can purchase a tulip adapter for it. In this way, you can connect almost any model, except for the very ancient ones.

  • We check the availability of the cable necessary for connecting, it can be included in the set to the receiver or television receiver. If you cannot find one, you will need to purchase it.
  • We remove the protective film (if any) from the set-top box, install it in the chosen place and connect it to the TV. The cables are made in such a way that it is physically impossible to insert them into a connector that is not intended for this. The exception is tulips, they can be confused in places. But to prevent this, manufacturers make nests for them in the appropriate color.

Standard colors of RCA connectors of the interface (tulips)

As you can see, the colors of the connectors match the colors of the jacks (4 in Fig. 3).

  • We connect power to the console. If the mains adapter is built-in, just plug the plug into the socket, pre-connect the external power supply to the corresponding socket of the receiver.
  • We connect the provider cable, decimeter antenna or satellite dish to the antenna input (2 fig. 3).
  • We insert the batteries into the remote control, turn on the set-top box and the TV.

This completes the connection procedure, and you can start setting up the channels. If your TV does not have the interfaces listed above, do not worry, we will tell you how to get out of this situation.

How to connect 2 TVs to a digital set-top box

Two television receivers can be connected via the antenna output, for this you need a special adapter from one to two cables (splitter).

Double splitter

Since the set-top box is intended only for one device, then two TVs will work synchronously, that is, show the same channel.

Necessary equipment

To watch digital broadcasting, as opposed to analogue, you need a receiver that decodes the signal. Many modern TV models (Philips, Samsung, Sony, Toshiba, LG, Panasonic, etc.) are equipped with such a unit. To verify this, you should refer to the user manual, this quick guide is included with each product. At the same time, check if the built-in tuner supports the DVB-T2 format, if not, you will need to purchase a receiver.

Receiver Supra

Depending on the set of functionality, Note that many digital cable TV providers provide receivers for rent to subscribers.

In addition, we need to receive a digital signal. In cities and large settlements, this will not be a problem, it is enough to contact local providers. Residents of rural areas will need to install a UHF antenna or satellite dish. The latter is preferable, since it is not a fact that your house is within the coverage area of ​​the nearest digital repeater. In addition, the option with a satellite dish gives you a wider choice of TV channels.

Digital set-top box standard equipment

Consider what is included in the standard set for the receiver, this information can be useful when connecting it to a television receiver.

Digital set-top box standard equipment

Let’s list what is shown in the figure:

  • A. user manual, we recommend that you carefully read this manual in order to get a complete picture of all the functionality of the device and its connection to TV and antenna.
  • В. “Tulip” (RCA) cable with characteristic connectors, allows you to connect the set-top box to almost all modern TV receiver models.
  • C. a device for decrypting and converting a digital signal into an analog (receiver).
  • D. packing box.
  • E. remote control for the device.
  • F. batteries for the remote control.
  • G. power adapter for connecting the device to a household power supply.
  • H. warranty service coupon.
READ  TV Diagonal 102 Cm How Many Inches

The basic equipment may slightly differ from that shown in the photo (for example, “Tulip” is replaced by an HDMI cable).

8 June 2018

Connecting an Android set-top box via Wi-Fi

Wireless technologies have become so densely embedded in our lives that now you can find a Wi-Fi router in almost every apartment. It is with the help of this device that it is most convenient to connect a Smart TV set-top box to the Internet. To do this, follow a simple scheme of actions:

  • After connecting the device to the TV, go to the TV Box settings menu using the mouse or remote control;
  • Find the “Wi-Fi” menu item. This feature is disabled by default. To enable it, drag the slider to active mode.
  • After a few seconds of searching, the device will display a list of available wireless networks. Select your Wi-Fi network from this list.
  • Enter the password you specified when creating your Wi-Fi hotspot and press the confirm button.
  • If your router is configured correctly, it will take a matter of seconds to connect to the access point.

What is the advantage of this method? Connecting an Android TV set-top box to the Internet via Wi-Fi will allow you to place the TV in any corner of the house or apartment, within the range of the router signal. so you will not be tied to the length of the cable. The main advantage is to connect other gadgets in parallel with the TV.

If you are thinking what to choose. an integrated SmartTV system or an external “smart” set-top box, then give preference to the latter option. Why?

The fact is that this gadget, namely a digital set-top box, has a wider range of functions and settings. The Smart TV set-top box will allow you to watch online movies and TV shows, surf the Internet, chat on Skype and social networks, play your favorite games. all from your TV screen. And now, the purchase is complete. Now it remains to configure. How to quickly set up Internet access on a TV set-top box? Read below.

Modern TV set-top boxes are compact multifunctional devices that can turn an ordinary TV into an easy-to-use gadget. Purchase Smart TV box easily replace the satellite dish. In this article, we will consider what is needed to connect to the Network and what is the sequence of actions.

Connecting a TV set-top box via an Internet cable

Another way to connect Android TV box to the WAN is using an Ethernet cable.

  • Find the RJ-45 connector on the TV box (marked in the figure) and connect the cable to it;
  • Go to the menu and activate the slider opposite the “Ethernet” item.
  • After a few seconds of auto-tuning, the Internet connection is established automatically in most cases;
  • If the connection failed, configure it manually. To do this, in the Ethernet item, enter the same settings that you use when connecting your computer to the World Wide Web. The only difference is that add or subtract one from the last digit in the IP address field.

This connection method allows the set-top box to make the most of the capabilities of the Internet cable, without sharing the data transfer rate between several devices. In practice, however, this type of connection is less convenient than wireless. And all because you have to allocate a separate line to connect your Android TV set-top box or constantly switch the cable between multiple devices. Therefore, for greater convenience, you should take care of buying a router in advance.

Transform your TV into a multimedia entertainment center and take full advantage of modern TV boxes.

How to connect the Orbit prefix to an old TV

Orbita is compatible with old TVs, so digital TV is available for them as well. Many channels will have to be set up on their own. they have few available sources.

Connecting the device

In order to connect the Orbita receiver to the TV, use the step-by-step instructions:

  • connect the router to the set-top box;
  • connect HDMI to TV;
  • turn on the TV to a digital channel (from the source of the HDMI jack);
  • connect the TV and set-top box to the network.

Setting options

It is necessary to configure the options in strict sequence. Your result depends on it. Follow our instructions:

  • connect the antenna cable to the Orbit prefix;
  • connect the set-top box to the TV;
  • connect the set-top box and TV to the network;
  • turn on the power of the signal amplifier (if you are using it);

By connecting cable TV from the provider, you will significantly expand the list of channels available to you.

How to set up the Orbita prefix without a remote control

To configure the set-top box without a remote control, you can use the set-top box control buttons, which are located on the TV panel. This situation occurs if the remote control is not available (the batteries are dead, lost, etc.). For example, by holding down two volume buttons at the same time, you can open the Menu tab. Also, a universal remote control will replace a regular smartphone, which has an infrared port.

Doesn’t respond to remote control or button doesn’t work

If the remote does not respond to your actions, replace the batteries or try to operate using a smartphone.

Basic operations

Orbita company offers its customers a lot of different models. HD 910, HD 911, HD 924, HD 925. Therefore, almost every consumer will find in this variety something for his TV. The main options that are available with the attachment:

  • USB flash drives (recording video to a USB flash drive, viewing photos and videos from a flash drive);
  • video and audio files in HD quality;
  • internet, YouTube, RTV;
  • parental control (setting passwords for adult channels, etc.).

Program manager

Users are offered various applications for the Smart media box, which make it easy to operate. These include the following:

If you have any questions or complaints. let us know

Channel search

There are two ways to activate this function. automatic and manual. To configure the digital STB Orbit to show channels automatically:

  • open the Menu and go to Settings;
  • select the one you need in the list of countries;
  • select the type of DVB-T2 signal;
  • press OK to confirm automatic settings.

The automatic method is convenient because the user does not have to look for any additional indicators, etc. You just run the scan and save the results. The manual option will help you find more available sources and channels, it also takes a little more time.

To activate manual channel search, you must:

  • open the Menu and go to Settings;
  • select the one you need in the list of countries;
  • specify the broadcast frequency available for your city;
  • press OK to confirm manual setting.

For the convenience of users, the channel sorting option is provided. In this case, it is necessary:

  • select the desired channel and confirm the selection with the OK button;
  • move the channel to the desired location using the Up or Down buttons;
  • confirm the selected channel position with the OK button;

To cancel your actions, there is an F3 button on the remote control, which will return you to the initial settings;