How to connect a DVD to a plasma TV

Ways to connect DVD to TV

If you have no idea how to connect a DVD yourself, then you do not need to immediately call the wizard. To enjoy your favorite videos and TV shows, you need to get connected properly. Before connecting the dvd to the TV, it is necessary to read the instructions and check which ports on the TV are available.

Among the popular connection methods, the following are known:

Scart connection

A not very popular method of connecting a DVD to a plasma TV is to use the Scrat connector. The transmission of sound and images is carried out in the same quality as when using HDMI. But the problem is that this port is quite rare on modern devices. To connect the player and TV, you will need to purchase a special Scrat-RCA cord, where one end is inserted into the player, and the other (where the tulips are) into the TV.

Connecting using RCA

For many years, so-called tulips have been considered the most popular method of connecting any television or video device. The RCA connector has three colors: red and white for audio playback, and yellow for video. Such connectors can be either on one side of the wire or on both sides. In order not to make a mistake and correctly connect the dividend to the TV, it is necessary to combine the plugs with connectors of the same color.

HDMI connection

The HDMI port is considered optimal when connecting a dvd player to a TV, because it provides the ability to transfer video to the screen without loss in quality. Outwardly, it is somewhat similar to a USB connector, but only thinner and longer. Experts say that in this way it is best to connect the divide-player to the plasma. It is desirable to use cable models 2.0 and higher, which are marked “High speed with Ethernet” and only from leading manufacturers. If you have no idea how to connect correctly, then check the inscriptions on the connectors.

Component cable connection

The component cord contains five plugs that you must connect to your DVD player. You need to be guided by the color coding and Output labels. The audio ports are red and white, and the video is another red, green and blue. In order not to get confused in the red “tulips”, lay them out on the table and make sure they are in the correct position: green, blue, red for a video picture and white, red. for audio accompaniment.

Sometimes component cables are only three-colored. green, blue and red. and are intended for the transmission of video content. Therefore, using such a cord, you will have to use an additional red and white cable to transmit sound.

The other end of the cable is connected to the outputs of the corresponding color and the inscriptions Input on the TV. Before turning on, make sure that all plugs are firmly seated in the connectors. Turn on the TV using the required datsource.

4 Ways to Connect DVD to TV

DVD players are quite common because they can significantly expand the world of entertainment. Their cost is low, so anyone can buy such a device. There are many ways to connect a DVD player to a TV, and all have their own characteristics, but are not complicated. After setup, you can watch movies as many times as you like and countless times.

Available connectors

Before connecting a DVD player, you need to familiarize yourself with the ports on your TV. As a rule, manufacturers equip equipment with the maximum number of connectors to make it easier for the user to connect various devices. The most popular are HDMI and Tulips. But also Scart and S-video ports are used.

Ways to connect DVD to TV

If you have no idea how to connect a DVD yourself, then you do not need to immediately call the wizard. To enjoy your favorite videos and TV shows, you need to get connected properly. Before connecting the dvd to the TV, it is necessary to read the instructions and check which ports on the TV are available.

Among the popular connection methods, the following are known:

  • using HDMI cable;
  • using an RCA cord;
  • Scart connection;
  • method using S – video ports.

Scart connection

A not very popular method of connecting a DVD to a plasma TV is to use the Scrat connector. The transmission of sound and images is carried out in the same quality as when using HDMI. But the problem is that this port is quite rare on modern devices. To connect the player and TV, you will need to purchase a special Scrat-RCA cord, where one end is inserted into the player, and the other (where the tulips are) into the TV.

Connecting using RCA

The so-called tulips have for many years been considered the most popular method of connecting any television / video device. The RCA connector has three colors: red and white for audio playback, and yellow for video. Such connectors can be either on one side of the wire or on both sides. In order not to make a mistake and correctly connect the dividend to the TV, it is necessary to combine the plugs with connectors of the same color.

HDMI connection

The HDMI port is considered optimal when connecting a dvd player to a TV, because it provides the ability to transfer video to the screen without loss in quality. Outwardly, it is somewhat similar to a USB connector, but only thinner and longer. Experts say that in this way it is best to connect the divide-player to the plasma. It is desirable to use cable models 2.0 and higher, which are marked “High speed with Ethernet” and only from leading manufacturers. If you have no idea how to connect correctly, then check the inscriptions on the connectors.

Component cable connection

The component cord contains five plugs that you must connect to your DVD player. You need to be guided by the color coding and Output labels. The audio ports are red and white, and the video is another red, green and blue. In order not to get confused in the red “tulips”, lay them out on the table and make sure they are in the correct position: green, blue, red for a video picture and white, red. for audio accompaniment.

Sometimes component cables are only three-colored. green, blue and red. and are intended for the transmission of video content. Therefore, using such a cord, you will have to use an additional red and white cable to transmit sound.
The other end of the cable is connected to the outputs of the corresponding color and the inscriptions Input on the TV. Before turning on, make sure that all plugs are firmly seated in the connectors. Turn on the TV using the required datsource.

How to Connect DVD to TV Samsung, LG and Others

There are many ways to connect a DVD to a TV, and each involves the use of a special connector. Find out what cables are needed and how to connect them correctly.

DVD players are quite common because they can significantly expand the world of entertainment. Their cost is low, so everyone can buy such a device. There are many ways to connect a DVD player to a TV, and all have their own peculiarities, but they are not complicated. After setup, you can watch movies as many times as you like and countless times.

Available connectors

Before connecting a DVD player, you need to familiarize yourself with the ports on your TV. As a rule, manufacturers equip equipment with the maximum number of connectors to make it easier for the user to connect various devices. The most popular are HDMI and Tulips. But also Scart and S-video ports are used.

Possible problems during DVD connection

Even having figured out how to connect a new DVD to an LG TV, it is quite possible that in the future you will have to face certain problems.

  • Power check. If a separate socket is provided for the player, make sure that there is voltage in it. Be sure to check the extension cord if it is used during the connection process. We inspect the plug and the wire going to the device.
  • We decide on the channel. If the image does not appear on the screen, check all available channels and additional ones. We study the settings, it is quite possible that the desired signal reception mode is not turned on. By the way, you can look at the TV manual, there will definitely be the necessary tips.
  • Cable. We check how correctly everything is connected, whether the color of the plug matches the connector. Also, the wire should not be taut. Even if it is installed correctly, the picture may not appear correctly. If there is another adapter cable, we try to connect it. It is possible that the plug has become unusable or the wire is defective.
READ  Sony TV Does Not Connect To The Internet

If, after all the manipulations, the image on the TV screen still does not appear, it means that there are technical problems with the DVD player. You need to visit the service center, where specialists will diagnose and, if necessary, repair.

If, after diagnostics, it turns out that the DVD is in perfect order, but you cannot connect it, then it is advisable to involve specialists. Although this happens very rarely.

Connecting DVD to TV

After buying a dvd player, you should understand how to properly connect it to your TV, in order to end up with a high-definition picture and high-quality audio on the big screen (the device transmits sound in stereo). To connect, use connecting cables, as well as, if necessary, different types of adapters.

The player comes with a connection cable. In most cases, use an RCA cable or a better type, HDMI. The first type of cord is called “bells”.

The studs on the two ends must have several colors:

  • yellow for connecting to video;
  • white and red for audio signal transmission.

This is the international standard that every device is equipped with. On the back of the dvd player, there should be connectors with matching colors. Yellow signed as Video, red and white. Audio. R-L.

The same connectors should be on the back of the TV device. In some models, they can be on the side or in the front. Connecting the player to the TV is not a difficult process, but you should learn some of the nuances.

Component cable

In some modern DVD models, you can see not three standard RCA connectors, but as many as five. This combination provides better sound quality and clearer images. The connection is carried out strictly according to the colors. After installing the connecting cable between the TV and the player, be sure to check it. If an image appears after installing the disc, then everything was done correctly.

Connecting DVD

How to connect a DVD to a Samsung TV. consider all the methods, note the settings that need to be done. During the connection process, TV and DVD must not be connected to the mains.

A similar connector is present exclusively on modern device models. To complete the connection, you will need to do the following:

  • on the back of the TV we find the desired port, it can be signed HDMI In. On the DVD we find an identical connector labeled HDMI Out;
  • we connect using an HDMI cable. It does not come with the player, you need to purchase it;
  • in the TV settings, you need to set the signal reception from the HDMI port;
  • turn on the equipment and check if the connection is correct.

Now you can run a disc with your favorite movie and watch it in excellent quality.

DVD to TV connection process

To make the correct connection between DVD and TV, you need to choose the right cable. First of all, you need to decide which connector to use, and make sure that the appropriate cord is not damaged and is compatible with the port.

As a basic guide, you can use the diagram for connecting a DVD to a TV using an HDMI cable, since it is the easiest to install and guarantees the best signal transmission.

By using an HDMI cable, you can be sure that your TV will receive not only the best image resolution, but also the best audio performance.

If you use this method of connection, you need to buy a good wire version 2.0 and later. The shell should say: High Speed ​​with Ethernet.

The RCA cable is an outdated design, but it is still used on many devices to connect DVDs to TVs. To mount the cord, you need to connect one side to the player.

The wire consists of 3 tulips of different colors. Each color must be placed in the corresponding slot on the DVD with the same color. Do the same operation with the TV.

In conclusion

You can connect the DVD player to the TV yourself. The procedure is quite simple, which even an inexperienced person can handle. The devices are disconnected from the power supply, connected with a special adapter cable, all that remains is to select the signal source on the TV and start the disc on the player. If all equipment is serviceable, then the connection process will take five minutes of your personal time.

A wide variety of set-top boxes can be connected to a Smart TV device, increasing the capabilities of the equipment. How to connect DVD to TV. further in the article.

How to connect Dividi to a Plasma TV

  • – connecting wires
  • – RCA-RCA, SCART-SCART, SCART-RCA, S-video adapters

When connecting with composite input, it is important to connect the three video signal wires correctly, they are signed the same on TV and DVD, otherwise there will be no picture.

When connecting, disconnect the TV and DVD from the power, and do not connect to the mains until you have installed the player in a permanent place.

The most convenient connection is SCART-SCART, it is not only the simplest, but when you turn on the DVD, the TV will automatically switch to the channel you need for the player, and when turned off, turn on the program that worked before the DVD was turned on.

It so happens that the TV does not support stereo sound. There will be two RCA connectors on it, connect them according to their colors.

After buying a DVD player, a logical question arises, how to connect a DVD to the TV. It may seem to many that there is nothing complicated here. However, as practice shows, connection problems often arise. As a result, the process of setting up the player is delayed for the whole day.

Manufacturer: Toshiba Corporation

1-1, Shibaura, 1-Chome, Minato-ku, Tokyo 105-8001, Japan

Factory: Zhongshan Torch Hi-Tech Industrial Development Zone,

Importer: Toshiba Digital Media Network CIS LLC,

123317, Moscow, Krasnopresnenskaya nab. 18B

How to connect a DVD player to a TV?

Although many users use a computer to watch videos, DVD players are still in use. Modern models differ from those previously released in compact size, functionality and a wide range of connectors. Manufacturers of digital equipment have thought out several connection methods, allowing each user to choose the best option.

Connecting other equipment to the TV, Continued), Rear of the TV

Connecting other equipment to

This type of connection requires a standard A / V cable. To watch the video, select on

For instructions on connecting the camcorder using other cables, see the instruction manual

Connecting a DVD player or other AV devices using
component video outputs

have component video output connectors,

use the appropriate kit

devices to component video inputs

significantly improve image quality

component source (see page 18).

A / V cable (not included)

Component cable (not included)

Ways to connect DVD to TV

If you have no idea how to connect a DVD yourself, then you do not need to immediately call the wizard. To enjoy your favorite videos and TV shows, you need to get connected properly. Before connecting the dvd to the TV, it is necessary to read the instructions and check which ports on the TV are available.

Among the popular connection methods, the following are known:

  • using HDMI cable;
  • using an RCA cord;
  • Scart connection;
  • method using S – video ports.
READ  How To Cast Pc Screen To TV

Possible problems and solutions

If during testing it was revealed that there is no sound, and only a video picture is displayed, this means that the cable is not connected correctly. Check that all color marks match. To connect the DVD to the Samsung TV, you need to use a cable, and the player itself must be connected to the outlet. After turning on the TV-panel, select exactly the mode to which you connected the DVD.

If the TV does not see the DVD, then replace the cables. Over time, the cord could be damaged, and the connectors lose their tightness. High humidity could affect the connector. When buying, try to choose a well-known manufacturer to be sure of the quality of the wire. After connection, the cable itself should not be stretched, but it is desirable that it sag a little. Pulling too tight may distort the image.

Possible problems during DVD connection

Even having figured out how to connect a new DVD to an LG TV, it is quite possible that in the future you will have to face certain problems.

Connect A DVD Player To A TV-How To (Tutorial)

  • Power check. If a separate socket is provided for the player, make sure that there is voltage in it. Be sure to check the extension cord if it is used during the connection process. We inspect the plug and the wire going to the device.
  • We decide on the channel. If the image does not appear on the screen, check all available channels and additional ones. We study the settings, it is quite possible that the desired signal reception mode is not turned on. By the way, you can look at the TV manual, there will definitely be the necessary tips.
  • Cable. We check how correctly everything is connected, whether the color of the plug matches the connector. Also, the wire should not be taut. Even if it is installed correctly, the picture may not appear correctly. If there is another adapter cable, we try to connect it. It is possible that the plug has become unusable or the wire is defective.

If, after all the manipulations, the image on the TV screen still does not appear, it means that there are technical problems with the DVD player. You need to visit the service center, where specialists will diagnose and, if necessary, repair.

If, after diagnostics, it turns out that the DVD is in perfect order, but you cannot connect it, then it is advisable to involve specialists. Although this happens very rarely.

Connecting DVD

How to connect a DVD to a Samsung TV. consider all the methods, note the settings that need to be done. During the connection process, TV and DVD must not be connected to the mains.

A similar connector is present exclusively on modern device models. To complete the connection, you will need to do the following:

  • on the back of the TV we find the required port, it can be signed HDMI In. On the DVD we find an identical connector labeled HDMI Out;
  • we connect using an HDMI cable. It does not come with the player, you need to purchase it;
  • in the TV settings, you need to set the signal reception from the HDMI port;
  • turn on the equipment and check if the connection is correct.

Now you can run a disc with your favorite movie and watch it in excellent quality.

Troubleshooting table, continued)

Troubleshooting table

The function is not applicable to the disc or the current mode. 54

The TV is in Special Play mode.
If using an amplifier, check the connection to the

If an external powered speaker is connected, check the volume,

The picture will be sporadically distorted. This is normal.

These playback functions do not work with all discs.

Turn off the TV, remove the plug from the socket, wait a few

minutes, then reconnect the power cord.

The disk may not match the “Protection” setting.

No multilingual features recorded on disc.

No subtitles recorded on the disc.
Subtitles are disabled. Press the SUBTITLE button.

There are no multi-angle scenes on the disc.

Remote control functions
Remote control does not work.

Point the remote control towards the IR receiver on the TV.
Make sure the remote control is used within 5 meters of the TV

or turn down the brightness of the lighting in the room.

Make sure there are no obstacles in the straight line from the remote control to the TV.
The batteries have expired. Replace batteries.
Check if the battery polarity is correct.

Check if the cable you are using has the HDMI logo (

If the connected REGZA device-

, keeps working incorrectly after changing settings

device, turn off the TV and unplug the power cord, then

plug in and turn on the TV again.

If multiple devices are connected, the REGZA-LINK function

Read the instruction manual supplied with the connected

a device that supports REGZA-LINK technology

HDMI function
HDMI function does not work.

Check if the cable you are using has the HDMI logo (

Some legacy HDMI source devices may

work incorrectly with new HDMI-equipped TVs due to

Media player functions
Media player not working.

Check if the devices are connected correctly.
If the USB device is connected with a separate cable or

USB hub, the TV will not detect the USB device.

Make sure Photo is selected in the media player menu.
Check if the image file format is supported.

Make sure Music is selected in the media player menu.
Check if the audio file format is supported.

Component cable

In some modern DVD models, you can see not three standard RCA connectors, but as many as five. This combination provides better sound quality and clearer images. The connection is carried out strictly according to the colors. After installing the connecting cable between the TV and the player, be sure to check it. If an image appears after installing the disc, then everything was done correctly.

Determining the available connectors

To understand how to connect a DVD to your TV, you need to examine both devices for available connectors. Much depends on the age of the equipment, so the connectors may differ significantly. Let’s consider the most popular options:

    HDMI.
    Ideal solution, especially if you have plasma. Provides the best possible picture and sound quality. When choosing this method, be sure to find a good quality patch cable. The priority is cable models 2.0 and higher, marked “High speed with Ethernet” and preferably branded products.

How to Connect a DVD/VCR Player to your TV

This is what an HDMI cable looks like
RCA.
For many years it has been the most demanded connector for connecting multimedia equipment. For many, RCA is tulips, and the connector has three jacks. red and white for sound, and yellow for video.

This is what an RCA cable looks like
SCART.
A rare guest on modern DVD players. In terms of the quality of picture and sound transmission, it is inferior only to the first option. To make the connection, you will need to purchase a special SCART-RCA adapter cable.

SCART-RCA adapter cable
S-video.
How to connect a DVD player to your TV via S-video should be considered only if the previous options are not available for some reason. Only a picture is transmitted through this connector; for sound, you will need to additionally use an adapter cord with tulips or use a 3.5 mm jack. So, if the player has a similar connector, and the TV has a standard antenna input, you can use an S-video-RF adapter.

S-video. RCA adapter

It should be noted that all kinds of adapter cables are now available, so there are no hopeless situations. It remains only to choose the most convenient way for yourself.

Possible problems during DVD connection

Even having figured out how to connect a new DVD to an LG TV, it is quite possible that in the future you will have to face certain problems.

  • Power check. If a separate socket is provided for the player, make sure that there is voltage in it. Be sure to check the extension cord if it is used during the connection process. We inspect the plug and the wire going to the device.
  • We decide on the channel. If the image does not appear on the screen, check all available channels and additional ones. We study the settings, it is quite possible that the desired signal reception mode is not turned on. By the way, you can look at the TV manual, there will definitely be the necessary tips.
  • Cable. We check how correctly everything is connected, whether the color of the plug matches the connector. Also, the wire should not be taut. Even if it is installed correctly, the picture may not appear correctly. If there is another adapter cable, we try to connect it. It is possible that the plug has become unusable or the wire is defective.
READ  How to connect a Samsung video recorder to a TV

If, after all the manipulations, the image on the TV screen still does not appear, it means that there are technical problems with the DVD player. You need to visit the service center, where specialists will diagnose and, if necessary, repair.

If, after diagnostics, it turns out that the DVD is in perfect order, but you cannot connect it, then it is advisable to involve specialists. Although this happens very rarely.

How to independently connect a DVD player to a TV

After buying a DVD player, a logical question arises, how to connect a DVD to the TV. It may seem to many that there is nothing complicated here. However, as practice shows, connection problems often arise. As a result, the process of setting up the player is delayed for the whole day.

Connecting DVD

How to connect a DVD to a Samsung TV. consider all the methods, note the settings that need to be done. During the connection process, TV and DVD must not be connected to the mains.

A similar connector is present exclusively on modern device models. To complete the connection, you will need to do the following:

  • on the back of the TV we find the desired port, it can be signed HDMI In. On the DVD we find an identical connector labeled HDMI Out;
  • we connect using an HDMI cable. It does not come with the player, you need to purchase it;
  • in the TV settings, you need to set the signal reception from the HDMI port;
  • turn on the equipment and check if the connection is correct.

Now you can run a disc with your favorite movie and watch it in excellent quality.

SCART

Rarely, but it happens with the player comes with a SCART cable. You cannot confuse it with another, since the plugs are quite impressive in size. Nothing else is required to connect. We find the corresponding connectors on both devices and use the wire to make the connection.

Please note that some TV models may have multiple SCART connectors. You need to select the option that is signed “In”.

With the RCA cable, it is a “tulip” is extremely simple, everything matches its colors, nothing needs to be invented and reinvented. First, we connect the wire to the connectors on the DVD, and then we connect the TV identically. The only drawback of this method is not the highest image quality. If you have a good modern TV at home, it is better to consider the methods presented above.

connect, plasma

In conclusion

You can connect the DVD player to the TV yourself. The procedure is quite simple, which even an inexperienced person can handle. The devices are disconnected from the power supply, connected with a special adapter cable, all that remains is to select the signal source on the TV and start the disc on the player. If all equipment is serviceable, then the connection process will take five minutes of your personal time.

Connection methods

Despite the fact that many modern TVs can directly connect to the Internet via Wi-Fi, playing video files via DVD is still very common entertainment. The scheme of its connection to the TV display is not the same. The peculiarity of connecting hardware elements is associated with different connectors, their configuration and number. Depending on the outputs for the wires, their comparability in technology, the most optimal method is selected, in which high-quality signal reproduction can be ensured. So, let’s look at the methods to connect a dvd player.

  • One such method is using an A / V cable. It is a cord with three ends of different colors, which are each inserted into a specific socket on DVD and TV with the same color. The red and white plug is responsible for the transmission of the audio signal, the yellow one for the video transmission. This connector is also called “tulip”, and the method of connecting it is the most common.
  • Using an HDMI cable capable of transferring high quality video, audio signals. This connector is very similar to USB, but it is much thinner and has a longer cord, which provides more options for placing equipment. This method of connecting a DVD to a TV is the most modern.
  • Digital equipment can be connected via SCART wire. This is the easiest way to connect. The cable has single lugs with contacts in two rows. On one side, the connector is marked with a down arrow, which means signal reception, on the other, an outward arrow, which means outgoing signal. SCART collects less noise than any other type of wire.
  • Composite connection allows you to get a better signal than A / V cable, but worse than HDMI connection. The DVD player transmits the video signal through the S-video output, and the sound through the tulip connection. How to connect a DVD to play video in this way? It is necessary to make a cable connection, consisting of five connectors: green, blue, red is responsible for video, the rest for audio.

Connecting DVD to TV

Before opting for the final DVD player, it is worth looking at the user manual or looking at the available connectors on the TV panel before buying. The player comes with a cable for connecting to a TV. A common case is the purchase of equipment from different manufacturers, and the types of connectors may differ. In this case, the question may arise, how to connect the dvd to the TV, if the devices are of different generations.

Device collaboration rules

The connected DVD player should be in close proximity to the TV, but do not put equipment on top of each other to prevent overheating. If the wire that is included in the kit cannot be connected to the screen due to the mismatch of the connectors, you can take a photo of the output of digital devices to purchase a suitable tool for connecting them.

It can be adapters or a new cable.

To connect Dividi to a Samsung TV, you can use both an HDMI cable and an RCA wire, it all depends on the novelty of the technology model. For modern plasma or LED TVs, modern cables are used that transmit the highest quality image and sound. Older models, even a brand like Samsung, may use the usual tulips.

It is convenient to launch a DVD with a TV using a remote control. For these purposes, on 2 remotes, you must press Video or TV / AV. After the static menu appears, select the required action in the player and start playback. If you want to be able to control both devices from one remote control. purchase and configure a universal remote control.

You need good sound to watch DVD movies with quality. If your TV does not have too powerful speakers, then this issue can be completely solved by connecting various speaker systems. In particular, the soundbar for the TV will be an excellent choice: this compact device will significantly expand the sound possibilities and allow you to completely immerse yourself in the atmosphere of your favorite films.

connect, plasma