How to connect a digital set-top box to a Samsung TV

Table of Contents

Do all Samsung TVs need a set-top box

Using the tuner is straightforward. If you know how to switch your Samsung TV to and from a set-top box, you can switch between modes and watch the content that you like. The peculiarity is that not all Samsung TVs need to connect a digital set-top box.

In many models, the DVB T2 and Smart TV option is already built-in. The list of supported models includes hundreds of devices, so there is no point in listing them. The main thing is to set the desired filter upon purchase and immediately determine where the digital tuner is already built into Samsung, and where is not.

How to connect the receiver to an old Samsung TV

If you have at your disposal a TV released in the last century, the situation is aggravated. The following options are available here:

  • RCA. Above, we gave a brief instruction on how to connect a digital set-top box to a Samsung TV through tulips or other connectors. All you need to do is insert the wires, taking into account the colors. yellow, red and white (audio).
  • SCART. Some older Samsung TVs have this connector. If it is absent on the set-top box, you can use some kind of adapter, for example, from SCART to RCA.
  • Through the antenna. If you cannot connect the set-top box to Samsung TV using standard connectors, you can use a special RF modulator. Its task is to convert the signal to the required format.

We will repeat ourselves once more. Before turning on your Samsung TV with a set-top box, check for the required connectors and prepare for work.

How to connect a tuner to a modern Samsung TV

The first thing we’ll talk about is how to install a digital set-top box to a modern Samsung TV. The algorithm of actions is as follows:

  • Connect antenna to digital tuner.
  • Connect the receiver and Samsung TV using one of the cables (see options below).
  • Connect a wire to the TV from the RF-Out connector to watch analog TV.
  • Turn on your set-top box and Samsung TV.
  • In the TV receiver menu, turn on the desired mode (AV, SCART, HDMI).

To connect a Samsung TV, you can use the following connectors:

  • HDMI. Pros. high quality video, simultaneous image and sound transmission. Cons. the need to additionally buy equipment, cumbersome.
  • RCA. The use of “tulips” has a number of advantages. the ability to quickly connect a digital TV set-top box to a Samsung TV of different years of release, the presence of color separation in order to avoid confusion. Cons. relatively low video quality, the need to use three wires.
  • VGA. Advantages. a large selection of supported devices, high connection speed, a wide selection of adapters. Cons. relatively low video resolution (up to 1280p), interference and discrepancy for some devices.
  • SCART. Pros. transmission of audio and video in one cord, a large selection of adapters. Cons. supported by fewer devices, greater cable thickness.

How to connect the receiver to Samsung

Before connecting your digital set-top box to your Samsung TV, prepare the equipment you need to get the job done.

  • Receiver. Essential for converting and transmitting a signal to TV. TV tuner options may vary depending on the manufacturer and model. For example, in modern devices you can connect Wi-Fi, watch movies from a flash drive, connect to a smartphone and solve other problems.
  • Remote controller. This item is required after connecting a digital TV set-top box to a Samsung TV. With it, you can search for channels, make settings, and subsequently control the sound and change programs. And most importantly, for many models, you can install an online remote control on a smartphone.
  • Power Supply. It is used to power a digital set-top box. Can be built into the receiver or remote.
  • Antenna. It is recommended to connect the receiver before connecting the tuner to Samsung to receive the signal. Depending on the region of residence and coverage, you can install an external or internal antenna.
  • Connection wires. Before connecting the set-top box to your Samsung TV, decide on the right cable. We will consider the available options below.

In addition, a 75 ohm cable is required. It is needed to connect the antenna to a digital set-top box. You will also need two F-plugs to slide over the cable ends.

How to connect and set up a digital set-top box to a Samsung TV

Let’s figure out how to connect a digital set-top box to a Samsung TV, consider the available methods and their features. We will also talk about whether a tuner needs to be connected to all Samsung TVs, and what difficulties may arise during operation.

Customization

If you have successfully connected the equipment, you can proceed to the next step. setting up a digital set-top box to your Samsung TV. Take the following steps:

  • Turn on your receiver and Samsung TV if not already done.
  • Enter the digital tuner menu and select Setup.
  • Set the correct country and signal type (DVB T2).
  • Turn on automatic search and wait until the desired channels are found.
  • Save found channels and group them according to personal preference.

If you could not find any channels, set a manual search and set the data taking into account the frequency applicable for digital television in the region.

Frequent problems

Above, we looked at how to connect and set up a digital set-top box to a Samsung TV. Unfortunately, the switching process does not always go smoothly. Sometimes you have to face various difficulties:

  • Problems finding channels. Check the correctness and quality of the connection, make sure the cable is intact, relocate the antenna and check if it has DVB T2 support.
  • Not all channels can be found. Check which channels are available in the city of residence on the interactive map of DTV, perform automatic or manual tuning again.
  • No signal. Check antenna or cable. Try reconnecting your digital set-top box to your Samsung TV. Dial a provider and check if any work is in progress.
  • Poor picture quality. Buy an antenna with an amplifier, relocate the receiver, or raise it. If the video deteriorates during bad weather, wait until the weather conditions return to normal and try connecting the equipment again.
  • The image lags or freezes. Update software, check signal quality.
READ  How to enable auto-rotate on Samsung A 30

Knowing how to connect a digital set-top box to a Samsung TV, you can expand the functionality of the device and get additional options at any time. But take your time with the purchase of a tuner. If Samsung already has support for Smart TV and DVB-T2, there is no need for additional spending.

Which Samsung TVs need a set-top box

It is worth noting that not all TVs require a receiver to operate digital TV. In some models, this function is built-in, so they do not need to connect additional equipment. These devices include TVs with Smart TVs, which require Wi-Fi to function properly and to provide advanced features.

A DVB-T2 receiver is found in many models since 2012. You will find them in the LS, M, Q, H, J, K, F, E series. To enjoy digital broadcasting, simply connect the antenna and start the initial setup with the remote. You will need to indicate the country of location, set the current time, search for channels (the system will perform the procedure automatically, just click on the “Ok” button).

If you are not sure if your model of device requires a receiver, then check its part number. Look at the batch number. For example, the attached screenshot shows that this model belongs to the “F” edition.

Signal quality check

Signal quality check is considered a useful option, especially when using an antenna. Find the INFO button on the remote, and press it several times. This should bring up a hidden menu, where two scales will be demonstrated by which you can determine the quality. than 70% is considered a normal value. If this indicator is less than the prescribed value, then move the antenna to another place to solve the problem.

Receiver selection

  • The attachment must be equipped with all required connectors. Not only have an HDMI input, but also RCA or SCART, used in older TVs.
  • Supported screen resolution must be HD or Full HD.
  • Functional. The main task of the receiver is to transcode the incoming signal. Some models offer enhanced user experience. For example, a function for recording a specific broadcast on TV, delayed viewing, Internet, etc.
  • Ability to connect to Wi-Fi and use IPTV.

It makes no sense to buy an expensive model. You can take a simple attachment, it will include the necessary functionality for comfortable use.

Most common connection problems

Users often encounter the following problems:

  • Rippling image. In some cases, squares can be observed. Solution. make sure that the cable is in good working order, the antenna is connected and located correctly, because the reason is hidden in a bad signal.
  • Colorless picture (black and white). Check if the cables are connected correctly. You may have mixed up the connectors. Have you checked the connection and everything is ok? Go to the tuner parameters and in the “Image” tab set “Auto tuning”.

Necessary equipment

You don’t need a lot of equipment for digital broadcasting. It is enough to purchase an antenna and a receiver (if the TV does not support Smart TV). The main problem that users may face is the choice of antenna. There are two main types. indoor and outdoor. What is the difference and which option is better to buy?

How to connect a phone to a TV via t2?

How to connect the phone to the TV via the T2 tuner.… Make sure the set-top box and the smartphone are connected to the same Wi-Fi network.

  • Connect your Apple TV.
  • Turn on the internet and connect to your home network.
  • Press in the menu using the remote control the item “Screen Repeat”.
  • When connecting for the first time, enter the security password.

How to connect your phone to an old TV via a digital set-top box?

  • Turn off both devices (unplug the TV cord from the wall outlet).
  • Connect the ends of the cable to the corresponding jacks.
  • Turn on TV and smartphone.
  • Select HDMI as the source in the TV menu. After that, the phone screen will be displayed on TV.

How to display an image from a phone to an old TV?

  • In your TV, plug the Miracast adapter into the HDMI port.
  • Connect to it via USB power.
  • On TV, select HDMI. After that, the connection properties will appear.
  • Set image broadcast on your phone.
  • Connect the wireless network of the adapter.

How to connect a Smart TV set-top box to an old TV?

Just plug the Jack into the AV port of your Android TV box, and the three tulips into the matching jacks on your TV (Yellow wire to yellow jack, red to red, white to white). After that, turn on the TV and activate the AV mode, this is done with the corresponding key on the remote.

How to connect a phone to a TV via a digital set-top box?

  • Open network settings on your TV and turn on Miracast.
  • On your smartphone, go to Settings → Display → Wireless Monitor and enable the.
  • Select your TV from the list of found Miracast devices.
  • The image from the smartphone will appear on the TV screen immediately after connection.

How to connect digital TV to an old TV?

A Scart cable is often used to connect digital television to an old TV. It is a more compact version of tulips. On the TV side there are also 3 wires in yellow, red and white. But from the side of the console. only one.

How to connect t2 to an old TV via the antenna input?

In order to connect a digital set-top box in this way, you must:

  • Disconnect both devices from the network.
  • Connect the antenna cable to the RF-IN connector.
  • Insert the three colored cable plugs into the corresponding colored connectors on the set-top box.
  • Turn on TV and select AV mode.
  • Set up and save channels.

How to connect your phone to an old TV via USB?

  • Connect the supplied cable between your device and the TV.
  • A window will appear on the device screen, select the “Connect as external storage” option. The built-in file manager or player will open on the TV.
  • Run media files from your mobile device.

SCART

SCART has not been used in new TVs for a long time. This connector is found only in older models. To use this output you need an RCA adapter.

The presented output is available in all new TVs. HDMI offers better transmission quality, providing good picture and sound. Connect the cable to the receiver and to the jack in the TV set.

RF only applies to older devices. The tuner has two such inputs. IN and OUT. The first is necessary for the encoded signal, and the second connects to the TV itself.

READ  How to connect a USB flash drive to a sony bravia TV

How to connect Samsung TV to digital TV without a set-top box

Modern Samsung devices connect to digital TV without a tuner. The configuration process is not complicated, because it is carried out automatically by the system itself, it is enough to select the desired parameter. Instructions:

  • Open the menu and enter the “Broadcast” section.
  • Select automatic setup.
  • When choosing source, specify the connected antenna or the input used.
  • In the “Channel type” tab, click on “Digital broadcasting”.
  • In the search mode item, select. Full.
  • Click “Scanner”.
  • The detected broadcasts will appear in the list. They are saved automatically. Wait for the system to complete the procedure.
  • Autosearch can be restarted if necessary.

In some cases, manual configuration may be required. For example, when autosearch fails or does not find the entire list of broadcasts. For manual tuning, go to the “Channel” section in the menu and select the connected cable instead of the antenna.

  • In the country tab, change to Russia or Eastern Europe.
  • Go to “Cable Search Settings”.
  • Use the remote control to specify the frequencies. 298000-362000 kHz.
  • Select “Digital”.
  • Search type. Network.

Which antenna to choose

First of all, you should find out the distance to the nearest television tower. If the repeater is not far away, then a simple antenna will do.

Thus, the following classification can be presented:

  • Indoor antennas. Good performance when receiving a signal if the repeater is located nearby. in a city or close to a house. The distance to the tower should not exceed 15 kilometers.
  • Outdoor. In the case when the tower is at remote distances, then choose a device that works in the decimeter range. That is, it should pick up frequencies from 470 to 860 MHz.

Do you want to set up digital TV in a country house where the tower is located at a great distance? Choose an antenna with an amplifier.

How to connect a digital TV box to a Samsung TV

How to connect a digital set-top box to a Samsung TV. this question arises for many who have recently started using digital TV. Some TV models do not support this format, but this problem is solved by the receiver. In the article we will consider which TVs need a set-top box, how to choose an antenna and the connection procedure.

Receiver selection

You will find many receivers in the digital market. The main difference lies in the functionality, which determines the cost of the set-top box.

If you have any questions or complaints. please let us know

It makes no sense to give specific recommendations on the choice of a set-top box. Choose a device according to your preferences, taking into account the financial component. But, do not buy a receiver that is too cheap.

Search and tune available channels

Having connected the set-top box, we start the search for TV broadcasts:

  • Go to the tuner menu.
  • Select the “Search for Channels” tab.
  • Click on automatic search.
  • Wait for the system to complete the operation.

Check the found channels, if their list matches the one declared by the provider, then the autosearch was completed successfully. If there are not enough channels, then use the manual search, additionally change the location of the antenna.

Necessary equipment

From the equipment you need only an antenna and the receiver itself. But, if the TV set already supports Smart TV, then the receiver is not needed. When choosing an antenna, questions may arise, below we will consider the nuances and features of the equipment.

How to connect the receiver to an old Samsung TV

If you have at your disposal a TV released in the last century, the situation is aggravated. The following options are available here:

  • RCA. Above, we gave a brief instruction on how to connect a digital set-top box to a Samsung TV through tulips or other connectors. All you need to do is insert the wires, taking into account the colors. yellow, red and white (audio).
  • SCART. Some older Samsung TVs have this connector. If it is absent on the set-top box, you can use some kind of adapter, for example, from SCART to RCA.
  • Through the antenna. If you cannot connect the set-top box to Samsung TV using standard connectors, you can use a special RF modulator. Its task is to convert the signal to the required format.

We will repeat ourselves once more. Before turning on your Samsung TV with a set-top box, check for the required connectors and prepare for work.

Just plug and play for video consoles

When you’ve gotten the latest game console or new media player, you’re in for the fun right away. Well, QLED TV is about to change your life. Here’s how to connect your DVD player to your TV (or Blu-ray!) Connect its HDMI cable to the One Connect Box. This is it. Or, if you’re wondering how to connect your gaming devices to your TV, it’s the same thing. Plug in the One Connect Box and get ready to win. It’s that simple!

How to connect the receiver to Samsung

Before connecting your digital set-top box to your Samsung TV, prepare the equipment you need to get the job done.

  • Receiver. Essential for converting and transmitting a signal to TV. TV tuner options may vary depending on the manufacturer and model. For example, in modern devices you can connect Wi-Fi, watch movies from a flash drive, connect to a smartphone and solve other problems.
  • Remote controller. This item is required after connecting a digital TV set-top box to a Samsung TV. With it, you can search for channels, make settings, and subsequently control the sound and change programs. And most importantly, for many models, you can install an online remote control on a smartphone.
  • Power Supply. It is used to power a digital set-top box. Can be built into the receiver or remote.
  • Antenna. It is recommended to connect the receiver before connecting the tuner to Samsung to receive the signal. Depending on the region of residence and coverage, you can install an external or internal antenna.
  • Connection wires. Before connecting the set-top box to your Samsung TV, decide on the right cable. We will consider the available options below.

In addition, a 75 ohm cable is required. It is needed to connect the antenna to a digital set-top box. You will also need two F-plugs to slide over the cable ends.

How to connect and set up a digital set-top box to a Samsung TV

Let’s figure out how to connect a digital set-top box to a Samsung TV, consider the available methods and their features. We will also talk about whether a tuner needs to be connected to all Samsung TVs, and what difficulties may arise during operation.

Why use USB to connect phones, tablets and TVs?

Given the simplicity and prevalence of broadcasting to display your phone screen wirelessly, you might be curious as to why you should use a USB TV connection for your phone.

If you connect your phone to your TV via a wired connection, you get a low latency signal. For example, if you plan on mirroring your phone to your TV for gaming, you will need a USB connection rather than a wireless configuration. This greatly reduces latency.

READ  How to connect honor 20 to TV

Plus: In situations where you have no Wi-Fi or a weak wireless signal, you will need a wired connection.

To connect your phone or tablet to your TV, you can use one of the following methods:

Start by connecting the SlimPort adapter to your phone, then connect the SlimPort adapter to the display using a suitable cable. You will then be able to view your phone screen on your TV. Like MHL, it’s plug-and-play.

Indoor antenna

Many people are interested in how to connect a DVB-T2 receiver using a home antenna, because it comes with most TVs. The problem is that such receiving devices are distinguished by the minimum amplification parameters, therefore, they are additionally equipped with all kinds of amplifiers. But they do not solve the problem, any fluctuations and interference are immediately displayed on the image quality.

We connect to the old TV

Many people ask the question of how to connect an old TV to a new digital set-top box. Not all houses have TVs of the latest generation, which was taken into account by the manufacturers of set-top boxes. Such devices are equipped with additional connectors that allow you to connect even very old TVs. There are several ways available to users:

  • using the SCART port, having previously purchased a tuner with a similar connector;
  • the oldest TVs are connected via a standard antenna connector;
  • with RCA-RCA cable.

Accordingly, having studied your TV, choose the appropriate connection principle.

Necessary equipment

To watch digital broadcasting, as opposed to analogue, you need a receiver that decodes the signal. Many modern TV models (Philips, Samsung, Sony, Toshiba, LG, Panasonic, etc.) are equipped with such a unit. To verify this, you should refer to the user manual, this quick guide is included with each product. At the same time, check if the built-in tuner supports the DVB-T2 format, if not, you will need to purchase a receiver.

Receiver Supra

Depending on the set of functionality, Note that many digital cable TV providers provide receivers for rent to subscribers.

In addition, we need to receive a digital signal. In cities and large settlements, this will not be a problem, it is enough to contact local providers. Residents of rural areas will need to install a UHF antenna or satellite dish. The latter is preferable, since it is not a fact that your house is within the coverage area of ​​the nearest digital repeater. In addition, the option with a satellite dish gives you a wider choice of TV channels.

Most common connection problems

If the video is interrupted or squares appear, then this is not a problem with the set-top box, but a rather weak incoming signal, which can be solved by changing the position of the antenna. You should also try to apply the echo signal. This problem may be due to a problem with the cable or connector. Be sure to check the integrity of the wire, as well as the correct installation of the connectors.

Another common connection error is black and white. Most often, a similar defect occurs if the cable is installed in the wrong connector. Be sure to check the image settings in the receiver’s menu, set the AUTO mode. In rare cases, the attachment itself may be broken.

Search for available channels

We have already decided how to set up a digital television set-top box for a TV, now we are starting to search for all available channels. The most accessible method is to enable autoscanning. We act as follows:

  • go to the receiver menu using the appropriate key on the remote control;
  • select the section “channel search”;
  • in the menu that opens, select autosearch and launch it;
  • the procedure takes a few minutes, after which we save the result.

If the found number of channels corresponds to the declared one, the setting is considered to be completely completed. In a situation where certain broadcasts are missing, it is better to try to search for them manually, be sure to check the position of the antenna.

If, after all the manipulations, certain channels are still missing, and the connection is correct, then we restore the basic settings on the set-top box. Next, run the search again.

The process of connecting a digital set-top box to a new TV step by step

Important! All manipulations must be done with the equipment turned off. If you connect a working equipment, there is a high probability of its failure.

Let’s describe the order of our actions:

  • It is necessary to select the interface for connecting the set-top box to the TV. It can be analog (tulips, D-SUB, SCART) or digital (HDMI, DVI). The choice is made depending on the specific TV model. Despite the fact that many television receivers of the Full HD class have an analog input, it is better to feed them “digital”, since double conversion of the signal will negatively affect the quality of the “picture”.

How to Connect a Set Top Box to Your TV

HDMI input on TV

This interface allows video and sound transmission, so the connection can be made with one cable.

If the TV does not have a digital input, it connects to any analog interface, the easiest way to do this is with tulips. In the event that the device has only a bulky SCART connector, you can purchase a tulip adapter for it. In this way, you can connect almost any model, except for the very ancient ones.

How to Set Up your Samsung TV and Set Top Box

  • We check the availability of the cable necessary for connecting, it can be included in the set to the receiver or television receiver. If you cannot find one, you will need to purchase it.
  • We remove the protective film (if any) from the set-top box, install it in the chosen place and connect it to the TV. The cables are made in such a way that it is physically impossible to insert them into a connector that is not intended for this. The exception is tulips, they can be confused in places. But to prevent this, manufacturers make nests for them in the appropriate color.

Standard colors of RCA connectors of the interface (tulips)

As you can see, the colors of the connectors match the colors of the jacks (4 in Fig. 3).

  • We connect power to the console. If the mains adapter is built-in, just plug the plug into the socket, pre-connect the external power supply to the corresponding socket of the receiver.
  • We connect the provider’s cable, decimeter antenna or satellite dish to the antenna input (2 fig. 3).
  • We insert the batteries into the remote control, turn on the set-top box and the TV.

This completes the connection procedure, and you can start setting up the channels. If your TV does not have the interfaces listed above, do not worry, we will tell you how to get out of this situation.