How to clean the speaker on iPhone 7

Table of Contents

What to do if the speaker on iPhone becomes quieter?

  • Make sure that Do Not Disturb (Settings. Do Not Disturb) and Silent Mode (switch on the side of the iPhone) are disabled.
  • Reboot iPhone and set the sound level to maximum.
  • Disable Bluetooth if other accessories are paired with it.

Where is the iPhone 7 microphone?

The iPhone 7 has 3 microphones: main and 2 auxiliary. The device used when talking on a mobile phone is located on the bottom edge of the case, to the left of the connector for the charging cable. Auxiliary microphones are located near the cameras.

How to clean the earpiece?

For the procedure of cleaning the mesh, you only need an old toothbrush and a little time. With a brush, you need to make circular movements along the mesh. It is important to try to get the brush fluff into the mesh and clean out dirt and dust from it. However, you should not overdo it here, so as not to damage the speaker mesh.

How to increase the speaker volume on iPhone?

Go to Settings β†’ Music β†’ Equalizer and select the Late Night preset. The iPhone sound will then change and become louder. Depending on the smartphone model, this can be a gain of 5-10%.

Where is the microphone on iPhone?

The first, located on the bottom of the iPhone, provides conversation and allows recording via a voice recorder.

How to increase the speaker volume on iPhone 7?

  • Go to the Library section, Preferences tab. In the com. Apple. celestial.
  • The plist document is then edited. There you will see the name of the regions and the value of the sound. For example, it could be 83%. You need to set 100% (number 1).
  • Reboot your device. After that, the smartphone should give out sound at full strength.

What to do if the microphone does not work on iPhone 7?

What to do if the microphone does not work on iPhone

  • Clean the microphone The microphone may be clogged with dust and dirt.
  • Disconnect Bluetooth accessories
  • Make sure nothing is blocking the microphone
  • Disable noise canceling
  • Grant microphone access to applications
  • Force restart your iPhone.
  • Reset all iPhone settings.
  • Update iPhone firmware.

How to clean your iPhone speaker yourself

At the moment, there are many different accessories designed to protect smartphones from damage. However, even a complete set of such tools does not save the device from dirt and dust accumulation in certain places. Most often, debris clogs the front camera, microphone, speaker and charging connector.

How to clean the speaker on iPhone 7 by yourself without disassembling the phone

At home, you can clean the speaker with a paper clip. This method is suitable for getting rid of large accumulations of dust and debris. Before starting the procedure, place the iPhone on the table and place something under the base to gain access to the speaker. All dirt is removed from the speaker port. If there is no paper clip, take a toothpick or other sharp-edged object.

Note! All actions must be done smoothly and accurately. Otherwise, you can harm the mesh. Also, do not stick the item too deep.

Moisten the object with alcohol or other liquid before cleaning the speaker.

If the earpiece is full of various micro-dust particles, you can clean it with an Artist brush or any other. Cleaning the iPhone 7 speaker starts with picking up the smartphone and holding it upright. With a hand with a brush, they drive over the surface, periodically checking the connector for dust residues.

The bottom of the speaker can be blown clean. To do this, use a regular hair dryer or air from the mouth.

Note! When using a hair dryer, be sure to use only cold air. Hot can damage the device.

During processing, the phone must be kept level with access to the speaker. Turning on the hair dryer, it is necessary to treat the surface and remove the remaining dust.

Special mini-vacuum cleaners clean phones and other equipment well. A set of such devices usually includes different attachments designed for different connectors. In a few seconds, you can clean the device from internal dirt, which is difficult to remove with conventional methods. True, such units are not cheap, so they often get by with improvised means.

clean, speaker, iphone

Mini vacuum cleaners work with USB connection

Some people use duct tape for cleaning. You need to take a small piece of tape and wrap it around a toothpick, sticky side out. Use this tool to treat a dirty surface. It is recommended to periodically clean all connectors in this way, especially when the bell becomes barely audible and the sound is low.

The above methods will help you to deal with the dirt on your phone on your own and will significantly extend the life of the device.

What to do if you can’t clean your iPhone speaker indiscriminately

In some cases, regular superficial cleaning does not work. This means that the smartphone needs to be disassembled.

To get the speaker, you need to use special tools for smartphones

How to clean the iPhone speaker by disassembling it:

  • The phone must be turned off.
  • Using a small screwdriver, the screws are unscrewed from the bottom, and the display is lifted from the bottom, where the “Home” button is located.
  • Remove the plastic that covers the battery connector and disconnect it.
  • Use a Phillips screwdriver to unscrew the screws holding the protective plate for the display cable convectors. It is important to take your time here: in order not to confuse the screws, each of them must be in its place.
  • After disconnecting the display cable, you will be able to access the speaker cover. Here 3 screws are unscrewed, after which the speaker can be easily reached.

After the device is disassembled, it is necessary to treat the speaker mesh with alcohol and clean the inside with a toothpick. By looking at the skylight, you can make sure that the device is completely cleaned.

How and what is not recommended to clean speakers and microphones on iPhone 5s

Experts are wary of using toothbrushes in cleaning. Mishandling can damage the grid and further clog the speaker.

If there is no other option, then it is better to take a brush with a soft and short bristle. It is also advisable to choose alcohol solutions rather than high-grade alcohol. Do not use water under any circumstances, as it is not a degreasing agent and promotes oxidation. You can use alcohol wipes to replace alcohol. Here it is important to ensure that a piece of cloth does not remain in the surface to be cleaned.

Do not use liquid products from nebulizers, as the jet of droplets can penetrate deep under the housing. Dangerous for gadgets and ammonia.

Note! During cleaning, the device must be turned so that liquid does not flow into the housing.

How to clean the earpiece mesh on iPhone 6

On the device 6 and 6 S, 6 S Plus, you can clean the speakers from dust with gasoline. It is poured into a small container so that it is convenient to dip the brush. You will need very little funds to slightly moisten the pile.

Note! Gasoline must not drip from the brush.

After the pile is moistened, you need to walk along the top of the net. The advantage of this method is that there is no need to disassemble the phone and pull out the mesh. The procedure is repeated several times until the result is visible visually. Finally, wipe off the remaining liquid from the speaker with a napkin. The procedure will help get rid of dirt and improve smartphone performance. To check the quality of communication, you need to talk to your interlocutor by phone.

For greater efficiency, alcohol or hydrogen peroxide is used to clean the device. These substances are able to disinfect the surface, dissolve sticky deposits and prevent dirt from sticking in the future. In addition, the liquid is quite volatile and quickly disappears from the body.

Use gum to clean the top and bottom connectors on iPhones XR and other models. To do this, it is necessary to thoroughly chew it and treat the dirty areas with smooth movements. All excess dust remains on the sticky substance. This method is especially relevant when traveling when there are no available means.

An alternative to chewing gum can be a pore cleansing mask, semi-dried instant glue, or PVA. But such funds have a significant drawback: their structure is more liquid, there is a risk of the substance entering the smartphone.

Important! You can only use glue or gum when absolutely necessary, if there are no other options.

If there are large pieces of dirt that are deeply embedded or stuck, a sewing needle can be used. During processing, be careful not to damage parts of the device. The tip of the needle is moistened with alcohol, and then inserted into the hole for cleaning to a depth of no more than 0.5 mm.

What you need to clean your iPhone speaker

The ingress of extra particles into the speaker of the phone significantly degrades the quality of the smartphone. A dirty hole distorts the sound, contributes to the appearance of noise, changes the volume of the voice. Poor audibility often becomes the main signal that the device needs cleaning.

READ  Video is not being dropped from iPhone to computer

Dust accumulations are often caused by poorly adhering protective glass

Every user should know how to clean iPhone speakers. There are various methods based on the use of common improvised means. It is often recommended to take only 2 tools: a brush and an alcohol-based liquid.

The best way to clean the device is with a hard bristle brush. If there is none, then a soft brush is taken, from which the upper part of the pile is cut off. You can use a cotton swab, but it does not cope well with large dirt.

  • cologne,
  • gasoline for lighters,
  • alcohol.

You can choose what is at hand right now.

How to clean your iPhone 8 microphone yourself

Microphones on Apple smartphones are easy to clean with a toothbrush. However, this should be done very carefully so as not to damage the surface. Toothpicks or cotton swabs are also used, which are pre-moistened in alcohol. Purge in suction mode is allowed.

If there is no sound or sound from the speaker on your iPhone, iPad, or iPod touch

Find out what to do if you have trouble hearing your interlocutor, if you experience clicks, pops, or sound quality issues.

The proven way to clean your iPhone speaker

Protective films and glasses, soft rubberized cases and hard shock-resistant bumpers. right after purchase, Apple smartphones are routinely packed into a collection of accessories that can save both from scratches on the screen and back cover, and from dents and chips that appeared after “accidental” falls.

But, as practice shows, even the listed “starting” set of protective measures does not always lead to success. sometimes the front camera “gathers dust”, sometimes the lightning connector is clogged with unknown debris, and in some cases even the sound during voice communication becomes “deaf” and hardly distinguishable.

And the reason for this is a loose film or special “free slots” for some important interfaces (for example, for a speaker). And, if the camera problem is calmly solved by a new film, and Lightning is treated with a toothpick, then in the case of the speaker, the situation is a little more complicated. you will have to clean the speaker on the iPhone.

Clean receivers and speakers

Remove all protective glasses, films and covers from your device. Check if the speaker hole is blocked or clogged. IPhone only: Make sure the receiver is not blocked or clogged. If necessary, clean the opening of the speaker or receiver with a small soft bristle brush. The brush must be clean and dry.

When to clean your iPhone speakers

One of the most frequent types of visits to us begins with the words “it has become quieter”. The situation does not change even if you increase the volume of the iPhone earpiece. There are several reasons for this symptom:

  • reduced battery capacity;
  • contact with moisture;
  • pollution;
  • hearing loss in the user.

Most often, a violation of the hygiene of operation leads to a blockage, when the smartphone is carried without a cover, just in a

  • If the user is working in a dusty environment, the speaker will need to be cleaned more often than usual.
  • High room humidity also leads to rapid clogging, particles of debris and dust settle on the element grill.

To prevent contamination of the device, we recommend using the Airpods wireless headphones. To receive a call, you do not need to reach the phone, just touch the earpiece. The less we contact the phone, the cleaner it is.

Check your sound settings

If your device has a Ring / Silent switch, slide it forward towards the device display so that the orange mark is not visible. If you’re using an iPad, you can also swipe down from the top-right corner to view Control Center and make sure Silent Mode is off.

How to clean the speaker on iPhone 7

Experts say that the smartphone is the dirtiest device. In terms of the number of microbes, it can only compete with paper money. Despite the fact that, unlike money, the phone is constantly in contact with our face and hands. Therefore, if you want to be healthy, you should regularly clean your gadget.

Check the sound on your device

Go to Settings> Sounds (or Settings> Sounds, Tactile Alerts) and drag the Ring & Alerts slider back and forth several times. If you don‘t hear any sounds, or if the speaker button on the Ringer & Alerts slider is grayed out, your speaker may need service. Contact Apple Support for iPhone, iPad, or iPod Touch.

Clean the iphone 7 speakers with a toothbrush or tape

You can also use a soft bristled toothbrush for cleaning. The ports should be cleaned with light strokes. This should remove dust and dirt from the holes.

You can also roll up small pieces of tape so that the side with the glue is facing outward.

Then roll them in sequence to the speaker holes. The adhesive surface should wipe off all dirt and dust.

How to clean your iPhone 7 earpiece and earpiece by yourself. dust, dirt or water cage

The iPhone 7 debuted on September 16. Since then, various experts have subjected the smartphone to various extreme tortures.

It even turned out that, despite Apple’s promises, it is not waterproof, but despite many negative statements, the phone is on sale.

However, the latest messages, potentially unpleasant for Apple, could make the iPhone 7 unpopular.

It turns out that a fairly large group of iPhone 7 Plus users are complaining about the sound quality during phone calls.

IPhone 7 and 7 Plus users claim that the sound coming from the speaker is severely distorted. Decreasing the volume helps to cope with the problem, but this is a temporary solution.

Of course, not only does a lot of dirt accumulate in the ports of the iphone 7 / iphone 7 plus, but it can easily get into the ear or speaker (loudspeaker) speaker. In these places, dust and dirt collects, as a rule, from the s of our trousers.

Fortunately, the service is not required for you, and you can independently clean the iPhone 7 speakers from dust, dirt and even water at home.

Below are the different options for cleaning the front and bottom speaker, from simple to complex. Everyone can choose the best option for themselves.

ATTENTION: you will not believe, but there is an application that can clean the speaker. it applies the sound of a special frequency. Try it. here is the description.

Clean the speaker on iPhone 7 with compressed air

Phones attract dust much more than other objects. This is due to the electromagnetic field generated by the devices.

To get rid of dust and particles from the speaker, it is good to stock up on a can of compressed air and direct the nozzle horizontally to the holes.

Clean the iphone 7 speakers by disassembling

Dirt, dust, water and iron filings are attracted by a magnet, as well as mechanical damage.

All this affects the iPhone 7. After all, a speaker is not only a telephone receiver, where we hear our interlocutor.

It is also multimedia and speakerphone. A similar situation applies to microphones installed in the iPhone. In the latest models, it can be three or even four microphones.

If the sound is still low despite the highest volume, make sure the speaker grill is clean.

To do this, the easiest way is to take a cosmetic stick (for example, for the ears), moisten it with alcohol, squeeze it well, make it wet, but not wet, and wipe the speaker surface.

Sometimes the speaker works, but the sound comes out like clicks. In this case, the membrane, which is made of very thin foil, is likely to be damaged.

In older models, the membrane is rather strongly affected by external conditions. metal filings were attracted by the speaker magnet, cutting and destroying the membrane film.

In iPhone 7, the earpiece is housed in a plastic case with an output channel, but despite this, it continues to wear out and be damaged. In case of sound quality problems, the speaker should be replaced with a new one.

There may also be another issue related to the lack of communication on the motherboard, which is achieved using the speaker flex tape, but also recording microphone sound in hands-free mode and video camera FaceTime.

Unfortunately, in this case, it is necessary to check the cause of the malfunction by trial and error, placing new elements and testing the device. If such a problem occurs, you should look forward to a replacement cable.

Only you are unlikely to dare to replace the train yourself. In the service, the time of such repairs should not exceed 30-60 minutes.

If it is necessary to replace the module together with the microphones, the repair time depends on the model. For iPhone 6S, including Plus models, the repair time should not exceed 30-60 minutes, but for models 7 and above, the repair time is about 2-3 hours.

Use a toothpick to clean the speaker in iphone 7

Toothpicks Are Helpful Tools In Dealing With Dirty iPhone Speakers.

Just like everything else, you have to be careful with them, ensuring that you don’t push too hard on the thin grate.

Use the tip of a toothpick to gently wipe the speaker by dragging any dirt around the edges where you can pick it.

You should be able to chunk off pieces of dirt, although if this is difficult you can slightly dampen the tip of a toothpick.

Be careful not to chip the toothpick, creating even more clutter on your iPhone.

Use a toothpick to gently brush into the dirt. However, you must be extremely careful when wetting a toothpick, as the liquid can very easily end up behind bars and cause irreparable damage.

Quiet speaker during calls on IPHONE 7

Very often, iPhone 7 users complain about the top earpiece. During a call, the caller / person who is calling us can be heard very quietly, despite setting the maximum volume using the side buttons.

The problem is often not with the loudspeaker but with replacing the top mesh from the loudspeaker.

It is recommended to clean the speaker mesh with a brush or compressed air at least once a month to avoid similar problems in the future.

It is very important to carry out all maintenance professionally and not damage the LCD during repair.

Contrary to its appearance, a lot of dirt can collect in the speaker. You cannot avoid this without stubs.

It happens that even the most efficient equipment fails. In the case of the iPhone 7, it sometimes gets damaged.

As a result, we do not hear the interlocutor in the telephone or voice communication. It also happens that other sounds are incomprehensible.

In this situation, you can try to diagnose and repair yourself.

How to protect your iphone 7 speaker from dust and dirt

Most of the available cases have a notch for the phone speaker, so they don’t affect the sound quality.

People who often carry smartphones in their s or keep them in dusty places can opt for a unique case.

READ  How to unlock iPhone without face

Despite the fact that the speaker in the case is closed, the cover does not affect the quality of the music and information signals being played.

The extremely elegant Wood Cases are made from high quality woods and are available in a smooth and engraved version. Success.

How to clean your iPhone 7 speakers

The iPhone 7 has two speakers. One is located at the top, the auditory, next to the front camera and at the bottom, to the right and left of the Lightning connector. It is the bottom speaker that provides stereo sound. And warning the question, how many speakers are in the iPhone 7? We answer: two, above and below. Depending on the detected defect, cleaning is required for the lower or upper element. If you have trouble hearing, the top speaker is most likely clogged. If you are hard to hear. lower.

Clogged speakers manifest as decreased audibility, uncharacteristic noise and crackling.

If the smartphone has not come into contact with liquid, you can clean the iPhone speaker yourself. But in order for the cleaning to be of high quality, we still recommend contacting the service center, since often superficial cleaning is not enough. over, if you rub with a brush on the outer grill, you can aggravate the situation, move the litter deeper under the body. Under no circumstances should the openings of the grill be cleaned with a toothpick or needle, as the mesh may be damaged. And in this case, instead of cleaning, get a replacement module.

To properly clean the speaker on the iPhone 7 from dust, you need special tools for disassembling the case, a hard brush.

  • Turn off the smartphone, remove the SIM card.
  • Then unscrew the two screws on either side of the Lightning.
  • We warm up the screen and with the help of pre-prepared tools, we disconnect the display from the case.
  • Disconnect the battery cable after removing the protective plate.
  • The hearing speaker is located on the display element. To start cleaning, you need to remove it. To do this, unscrew the protective bar into parts with the battery and disconnect the cables.
  • After the two parts of the smartphone are no longer connected, you can proceed to dismantle the module itself. To do this, unscrew 3 screws.
  • Now we carefully remove the speaker and clean it with any convenient object. It is important not to act carefully and not very intensely, so as not to damage the mesh.
  • The earpiece speaker is located at the bottom of the case with the battery. It is somewhat more difficult to extract it than an auditory one. You must first remove the Tapic Engino vibration motor. There is a Wi-Fi module in the immediate vicinity of the speaker.
  • After removing everything step by step, you can start cleaning the speaker itself.
  • Upon completion, the device should be assembled in reverse order.

It is not as easy to clean a module as it might seem. It is not recommended for a layman to do this.

When to clean your iPhone speakers

One of the most frequent types of visits to us begins with the words “it has become quieter”. The situation does not change even if you increase the volume of the iPhone earpiece. There are several reasons for this symptom:

  • reduced battery capacity;
  • contact with moisture;
  • pollution;
  • hearing loss in the user.

Most often, a violation of the hygiene of operation leads to a blockage, when the smartphone is carried without a cover, just in a

  • If the user is working in a dusty environment, the speaker will need to be cleaned more often than usual.
  • High room humidity also leads to rapid clogging, particles of debris and dust settle on the element grill.

To prevent contamination of the device, we recommend using the Airpods wireless headphones. To receive a call, you do not need to reach the phone, just touch the earpiece. The less we contact the phone, the cleaner it is.

How to clean the speakers on the IPhone 7

Experts say that the smartphone is the dirtiest device. In terms of the number of microbes, it can only compete with paper money. Despite the fact that, unlike money, the phone is constantly in contact with our face and hands. Therefore, if you want to be healthy, you should regularly clean your gadget.

Where to clean your microphone on iPhone 7

We do not recommend cleaning your iPhone 7 speakers at home. In the event that after home service there are extraneous sounds, and the volume has not returned, we advise you to immediately contact AppleLab. It may well be that the problem is only in a poor-quality assembly. Or, the decrease in sound is due to other reasons, module malfunction or other breakdowns. The exact diagnosis can be announced only after the diagnosis, which, by the way, is free with us.

To the service or at home?

Speaker cleaning is the same process for almost all iPhone versions. The actions are the same for both “4” and “10”, the main thing to remember are a few things: if your hands start shaking at the very thought of having to dig into your favorite smartphone, and panic is already arising in your head, then you definitely should not take action. it will only get worse.

And one more thing. before using the algorithm described below, it is worth choosing the right tool. Toothpicks or toothbrushes will not work. you need a soft brush that is not capable of damaging the membrane or disrupting the “mesh” of the speaker. However, first things first:

  • First of all, you will have to prepare the workplace: turn off your smartphone, take a small plastic container (a bottle cap and a food container lid are also suitable) and drip gasoline or an alcohol-containing liquid (it is undesirable to use high-grade alcohol, in addition, in no case should you apply for help to the water!). If there were no solvents or other liquids at hand that could disinfect the surface, then you can use gasoline from a lighter. The option is proven and working, the main thing is not to overdo it with quantity and observe safety precautions;
  • After preparation, pick up the iPhone, and dip a soft brush specially prepared for cleaning the speaker in gasoline or alcohol-containing liquid solely for the sake of surface moistening (the brush should not “drip”, otherwise there is a real chance to completely “accidentally” fill the connector and aggravate the situation). Before using the brush, it is worth checking three times. whether there really will be no extra drops?
  • With a prepared brush, apply the dynamics 2-3 times. The procedure should be repeated until at least visually there is less dust on the speakers, and the mesh takes on a distinct “gray” or “silver” design. If desired, hold over the rest of the connectors, which have become dusty during operation. Remains of gasoline or alcohol should be removed with a napkin;
  • If after 2-3 attempts even visually the speaker has not become cleaner, then you may have to cut off the upper part of the brush fibers to increase the stiffness of the bristles;
  • As a result of the work done, the speaker should return to its former state. If nothing has changed, and the interlocutors are still not heard, or the words cannot be disassembled even at maximum volume during voice communication, then two options remain. to start disassembling the device or contact the service center. In the first case, there is serious work ahead, which is definitely not worth touching without knowing the case (if the opening is incorrect, the risk of damaging the loop that is responsible for the operation of the touch screen or the actions of the buttons approaches 100%) and a suitable tool (a screwdriver must be included in the kit) sprocket capable of handling tiny parts).

In some cases, it is worth visiting several services at once to conduct an appropriate independent diagnosis. are the repairmen trying to raise the price or oblige to pay for additional services? Sometimes it is better to be patient, but bring what you started to mind.

Basic procedures that will prolong the life of your device.

Hardly any of us imagine life without basic hygiene procedures. Alas, the specifics of modern mobile devices do not yet allow them to take full-fledged water procedures. And although there are many models on the market that are not afraid of water, Apple is in no hurry.

This means that the smartphone needs proper care. Let’s see what elementary “hygiene procedures” can be carried out without the help of a service center and eliminate breakdowns associated with dirt, dust and other debris.

Note: the recommendations below do not provide for opening the device, so if you follow all points, you will not void your warranty. We also limited ourselves to mentioning specific brands or brands of cleaning agents. after all, any reader does not like advertising πŸ™‚

Symptoms: iPhone does not respond when the Lightning cable is connected. When you try to push or loosen it in the socket, charging starts.

Conclusion: most likely, the port is clogged with pellets of dust or debris.

Treatment: ALWAYS turn off iPhone before cleaning. To clean the port, just use a regular toothpick or a sharpened match. Never use conductive objects (any metal, such as paper clips, tweezers, screwdrivers) to remove dust and pellets of wool or debris.

After removing the debris, use a syringe or compressed air canister and blow through the Lightning port well. Do not use the common household method of “blowing out” by breathing! Human breathing contains particles of saliva, and any moisture that gets into the ports will lead to oxidation and its imminent death.

Symptoms: when you plug in headphones, you get the feeling that one of the channels is intermittently out of order. If the headphones are completely functional, then clean the iPhone jack.

Conclusion: Dust and dirt got into the narrow 3.5mm jack of the port.

Treatment: use a toothpick or a thin ear stick (be sure to press the villi). Unlike standard jack ports, the iPhone’s entire contact group is made in the form of round pins. That is why you can scroll the wand for a more thorough cleaning.

A can with compressed air will come in handy after removing debris and pellets.

Signs: during a conversation, there is a feeling of insufficient audibility of the subscriber even at maximum volume.

Conclusion: the speaker grille is dirty.

Treatment: Take a small hard-bristled brush, gasoline for lighters or alcohol, and a small container for pouring a few milliliters of liquid.

Soak the brush in alcohol or gasoline and ALWAYS squeeze out by brushing on any flat surface or paper. The brush should be damp, but not wet. Wipe the speaker gap with gentle strokes, without firm pressure, until it is perfectly clean.

Do not let liquids come into contact with the screen! The very procedure for cleaning the spoken speaker is a very elaborate and careful work.

Signs: The main speaker is much quieter. The slots in the area of ​​the hardware keys are clogged with dirt and are difficult to press.

READ  Missing sound in WhatsApp on iPhone

Conclusion: time to remove dust and dirt.

Treatment: a universal tool for cleaning all hard-to-reach places. an ordinary toothbrush with any bristle hardness. No cleaning agents or liquids are required. The loudspeaker openings are much larger than the spoken one and if you use alcohol or gasoline you risk damaging the diaphragm.

Use gentle movements with moderate pressure to clean the entire surface of the smartphone. For the best effect, remove the SIM card tray as well.

iPhone 7 Plus Cleaning the speaker

Conclusion: the screen is covered with an oily film of grease that needs to be cleaned.

Treatment: what not to use:

  • household wet wipes (streaks will remain);
  • clothes: a metal button or fastener and a dull scratch will flaunt on the screen;
  • a cloth moistened with water (water and electronics. you understand);
  • pure alcohol (not to be confused with specialized alcohol-containing products): the anti-reflective coating, which any smartphone manufacturer is so proud of, does not like alcohol. The higher the percentage of alcohol, the better it will erase the coating.
  • automotive products, window cleaners, glass cleaners, acetone, powder and any household chemicals. The reagents included in the composition will completely kill the protective coating of the screen, which prevents the glare of the device on a sunny day;
  • toilet paper, table napkins. Wood particles can lead to micro-scratches.

To clean the screen, use specialized aerosols, gels, filled wipes or dry wipes designed for cleaning in combination with microfiber. Ideal for cleaning optics, including special wipes.

You can do all of the above procedures at home without having to carry your iPhone to a service center. over, regular cleaning is a guarantee of a long, comfortable and trouble-free smartphone operation. Have a nice cleaning!

(4.56 out of 5, rated: 9)

Posted by Jane Winston October 10, 2018 17:06

“How can I clean my iPhone speaker, they fill up with dust and the sound gets very disturbing, any suggestions would be appreciated.”.

However, according to a recent study, our smartphone is also a giant germ germ that contains more bacteria than a toilet seat. In addition, dust accumulated on the iPhone speaker can cause a variety of problems, including allowing the speaker to stop working.

Considering that the best iPhone case can’t protect your device from getting dirty, we’ll share some solutions for you on how to clean your iPhone speaker in this post.

clean the iPhone speaker by blowing

Another way to clean your iPhone speaker is by dusting the port. A hairdryer is a useful tool, but do not use hot air. If you don’t have a hair dryer, use your mouth or compressed air as a substitute.

Step 1: Place your iPhone flat and open the speaker port at the bottom.

Step 2: turn on the hair dryer and remove the dust from the speaker.

Part 1. When You Need to Clean iPhone Speaker?

In fact, we suggest that you regularly clean your iPhone speaker at least once a month, but there are some situations that are sorely needed to get the job done:

Long term use. If you’ve been using your iPhone for a long time, such as several years, now is the time to clean your iPhone speaker. Even if you’re using an iPhone case, the speaker port should collect a lot of dust.

Just finished a long journey. iPhone is the most important device when traveling. We use it to take photos and videos and kill time on the plane. At the same time, it becomes a carrier of dust and germs.

Covered in dust. Sometimes you leave your iPhone on a desk or in a drawer for days or months. When you find it again, your iPhone is covered in dust and debris. It is better to clean the iPhone speaker before using.

The sound becomes unclear or choppy. Dust on the iPhone speaker may cause abnormal sound. So if the sound gets weird, you must first clear the iPhone speaker.

Home button or Touch ID error. The Home button is next to the speaker, and a dusty speaker can interfere with Home button use, causing Touch ID to crash.

clean iPhone speaker with duct tape

Scotch tape is a common feature in our daily life and is also a good option for cleaning the iPhone speaker.

Step 1 Take a small piece of tape and wrap it around one end of a toothpick. Make sure the sticky side is facing out.

Step 2: Insert a toothpick into the iPhone speaker and move gently. Then take it and you find the tape is full of dust.

So, wipe the dusty speaker so that it works fine and fix the touchscreen not working because the touchscreen is close to the speaker.

The above solutions are aimed at helping you clean your iPhone speaker. If your data gets lost due to speaker cleaning, restore iPhone files from iCloud or iTunes backup right now.

clean the speaker port with a brush

The Artist brush can also clean the iPhone speaker, especially when it is full of tiny debris.

Step 1: Hold your iPhone vertically in one hand.

Step 2: Use the brush in your other hand to clean the bottom speaker on your iPhone. Then tiny debris and particles will fall out.

Part 2. How to Clean iPhone Speaker

The iPhone speaker is a complex component. The dirtiest part is the speaker port on the bottom of the iPhone, and we do not recommend disassembling the iPhone to clean the iPhone speaker as this can cause more problems and even damage your device.

First of all, you can prepare speaker cleaning tools such as a toothpick or paper clip, a brush, and a hair dryer. Then press the side button and turn off the iPhone, and then choose the appropriate method from the bottom to simply clear the iPhone speaker.

clean iPhone speaker with paperclip

This method is used to clean up large pieces of dust and debris on the iPhone speaker.

Step 1: Place your iPhone on the table and use something to complement the bottom. This will make the iPhone speaker open and easy to clean.

Step 2: Remove all dirt and dust from the speaker port with a paper clip, toothpick, or any sharp object. You must do this carefully and do not insert the paperclip too deep.

Step 3: You can use a Q-tip dipped in a little rubbing alcohol to clean the speaker. Congratulations! IPhone speaker cleaning is now complete.

How to properly clean your iPhone speaker (if it’s quiet)

Many keep a whole park of devices around them. MacBooks, iPhones, iPads, and you never know what else. When you use all this goodness, the moment inevitably comes when nothing is visible on the computer screen because of the dust that has settled on it, the iPad slips out of your hands, because you just ate chicken wings, or you gave the iPhone a call to a girl. everything is fine, not smashed, returned, but a thick layer of foundation on the speaker is still a little embarrassing. Although dirt in the speaker and microphone can be clogged from simply carrying a smartphone in your

The left side is often more dirty than the right.

By itself, such dirt is often not visible, and you begin to address the problem already when you can barely hear the subscriber you are talking to on the phone. And what to do in this case? Many immediately arm themselves with a toothpick: the top layer of dirt can really be removed this way, but there is a risk, on the contrary, push it deeper into the speaker (and damage the mesh itself, which is quite fragile).

In the Apple Pro service center, special brushes and tweezers are used to clean the iPhone speaker. in most cases, mechanical cleaning of the speaker mesh helps to solve the problem (this also applies to the lower speaker and microphone). over, specialists perform this procedure completely free of charge for their clients: so if you have difficulty hearing your interlocutor or have problems with the microphone, we advise you to contact them.

Of course, sometimes mechanical cleaning is powerless. For example, if you’ve already tried to get rid of dirt yourself using the same toothpick (or just haven’t cleaned the speaker for several years after buying an iPhone). Here, an engineer opens the iPhone to check if the speaker is dirty, and blows the mesh from the inside. Such a procedure is already paid, but it is better to finally solve the problem than to experience discomfort from an incorrectly working speaker or microphone.

Here is a visual result. before and after cleaning. See how much dirt there is!

In the lower speaker and microphone, dirt is also heavily clogged. sometimes even more than in the upper one. Therefore, it must be cleaned periodically.

In some cases, all this does not help, and you have to change the speaker, but this applies to situations when the microphone or speaker does not work at all. As a rule, iPhone owners like to take their phones to the bathroom, where there is a high risk of moisture getting into open parts of the device, including through the speaker grill. Also, a blow, even not strong, can become the culprit. In this case, only replacing the iPhone speaker will help.

By the way, in addition, in the Apple Pro service center, Airpods are cleaned using a powerful air flow (under pressure) and a special brush. so much so that after such a procedure, the headphones look as if they were not worn at all.

Here’s how the Airpods were before cleaning the headphones:

Obviously, the more dirt gets into our devices, the worse the speakers work, so it is still better to clean it periodically. Technology exists in order to use it, have fun, communicate with friends, learn something new or, in the end, make money. Therefore, keep your devices clean by keeping them in a state in which you yourself will be comfortable using them. they will last you much longer! And colleagues from Apple Pro will help you with this.

Longreads for you

In iOS 14.2, Apple launched FaceTime HD, a new Full HD video calling mode. We figure out which devices support it, is there a noticeable difference in the picture quality and in what conditions it works

You’ve probably come across a situation where Safari refuses to generate reliable password as if not recognizing the login window. In this case, a dedicated quick command comes in handy.

While Samsung, Huawei and other corporations are developing bendable smartphones, Apple has decided to go further. The company is developing a display that can be

Guys, all dust is perfectly removed with chewing gum. And you don’t need any services. The price of the issue is 3 kopecks πŸ™‚ The same Makar and apple headphones are cleaned πŸ™‚ We took the chewed gum, put it on the speaker, pressed it and removed it. All the dirt remained on it πŸ™‚