How to adjust the brightness of your LG TV screen

Which settings are recommended to be turned off for the best image?

Disable all settings that adjust brightness / contrast to suit the TV. That is, you should disable “dynamic contrast”, “power saving mode”, “light sensor”, “dynamic backlight” and do not use “Dynamic” image mode.

❶ How to adjust the color of the TV

If you have a manual for your TV, open it and look at the buttons to control the brightness, contrast and color settings. Most often, their setting is located in one menu item and occurs in the same way. Find the button on the remote control that is responsible for adjusting the image.

LG tv dim (brightness low), how to fix.

In the menu that appears on the screen of your TV, using the buttons for switching the volume level and channels (depending on the device model), enter the brightness setting menu and use the same buttons to adjust this parameter to your liking. It is best to increase the value by several positions, because with a strong change in the indicator, the picture may lose brightness, and it will be simply uncomfortable to watch TV.

Proceed to adjust the picture contrast on your TV. It is best to leave it at its default value, although you can also adjust it to your liking, while being guided by how comfortable your viewing will be with this or that value.

Also note that the setting should be influenced by the lighting in which you normally watch TV and the location of the light source. It is better not to install the TV in front of a window, since when light falls on the monitor, no setting changes will help improve visibility.

Go to the color settings of your TV. As this value is increased, the colors will be more saturated, and as this value is decreased, the color will be lost. To make your TV screen black and white, set this setting to the minimum value. If you set the color value too high, your eyes can get very tired when viewing, the same applies to the picture contrast setting. It can harm your eyesight.

When setting up, do not forget about how changing the parameters will affect the viewing convenience.

How to make an image more faithful without resorting to hardware configuration?

Here are some tips based on my experience with setting up various TVs.

Step by step instructions for setting up your LG TV. Tips for Correct TV Setup

I think you will agree that the TV should not only show some kind of picture, but also introduce as little distortion as possible into the original content. The content itself is always created with an eye to industry standards and guidelines, and the main goal of any TV. to convey to you exactly the image that you wanted to show. Everything is important here: the actor’s skin tone, and the color of the sky at sunset, and which details of the image should be visible and which ones should be hidden. There are international standards that describe what the picture should be on your TV screen. All of you, for sure, have met the abbreviations PAL, NTSC, or HDTV, it is these letters that hide the properties of the video signal and various image parameters. With the advent of HDTV into our lives, most of the standards immediately became obsolete, and, in fact, the most relevant now is the REC709 standard, which is used in high definition television (HD) and Blu-ray video.

The general parameters of a correct image are: color temperature 6500K (D65). the gamma is linear, the recommended value is 2.22, for a darkened room 2.4. recommended brightness

The only sure way to get the correct picture on your TV screen. hardware calibration. It consists in the fact that reference images are fed to the input of the TV, and measurements are taken from the screen. Next, the TV settings are adjusted until the picture parameters are as close as possible to those required by the standard. But this setting is quite laborious, it requires knowledge, and above all equipment.

Can I make the image on my TV screen more faithful without resorting to hardware setup? Here are some tips based on my experience with setting up various TVs.

Which picture mode should I choose (Standard / Dynamic / Cinema)? On the vast majority of TVs, the Cinema / Cinema mode is the most correct. Do not use the “Dynamic” mode for viewing: due to the nonlinear gamma, the image in it is always incorrect, and due to the very high brightness, this mode strains your eyes, especially if you watch TV in dim lighting or in the dark.

Which color temperature mode should I choose (cool / standard / warm)? On the vast majority of TVs, the closest to the standard color temperature (6500K) is Warm. If you have Warm1 / Warm2 (on Samsung TVs), decide which one is better. This is usually Warm2, but there may be exceptions.

What settings are recommended to be turned off for the best image? Disable all settings that adjust brightness / contrast to suit the TV. That is, you should disable “dynamic contrast”, “power saving mode”, “light sensor”, “dynamic backlight” and do not use the “Dynamic” image mode.

How do I set the correct contrast parameter? In fact, it is incorrect to call this parameter “contrast”, since the contrast is. it is the ratio of the maximum brightness of the white field (white level) to the black level (minimum panel luminance level). So, the “contrast” parameter in the TV menu changes exactly the white level, that is, the level of maximum image brightness.

For plasmas: it is better to adjust the “contrast” parameter in the dark; set the “contrast” parameter to a value close to the maximum (90-95);

Samsung plasma TVs have a “cell light” setting that has a big impact on the overall brightness of the picture. You can immediately set it to a value close to the maximum (18-20), and then follow our recommendations.

LCD TVs are arranged slightly differently. they have a “backlight brightness” parameter (sometimes called “backlight contrast”) that matters the most to the overall brightness of the image.

For LCD / LED :. it is better to make adjustments in the dark; set the “contrast” parameter close to the maximum value (90-95); display an image with a white level window (100IRE) (links at the end of the article); set the “backlight brightness” parameter to the maximum value;

I do not recommend using the maximum values ​​of the “contrast” parameter, because some TVs have non-linearities in the color temperature when the maximum value is set. An excessively bright image (and the “contrast” / “backlight brightness” is responsible for the real brightness in the TV) strains your vision and leads to eye fatigue, remember this when adjusting these parameters.

How do I set the “brightness” parameter correctly? The brightness parameter determines the black level. To install it in the correct position, you can use the special “Pluge pattern” image. In this image, the leftmost vertical bar is black. To set the brightness parameter to the desired position, first increase it until you can clearly see all the stripes, and then decrease the brightness parameter until the leftmost vertical stripe merges with the background. In addition, you can use special discs for setting, for example AVSHD (link at the end of the article), where in the “Basic Settings” section you will find the necessary images to configure the basic settings of the TV.

READ  How to connect laptop to LG TV

What is clarity? How to install it correctly? Sharpness. it is precisely the clarity of the image. This parameter is needed so that you get an equally clear image from different viewing distances. To adjust this parameter, you can use a special image “Sharpness pattern”. The method of setting “clarity” is as follows: sit at viewing distance from the TV; display “Sharpness pattern” on the TV screen; increase the “clarity” parameter to the maximum, or to a value at which artifacts of excessive “clarity” will be clearly visible: light halos around objects and thickening of thin lines; reduce the “sharpness” parameter until the artifacts of the image disappear, such as light halos around objects and thickening of fine lines.

How do I set the correct color / saturation parameter? It is difficult to establish this parameter correctly without measurements. My recommendations. display high-quality photographs of nature with many shades of green on the TV screen (since the eye is most sensitive to it, and it is he who is overexposed on many TVs) and adjust the color / saturation parameter until the image looks as realistic as possible. Additionally, you need to check the settings on high-quality photographs of people, skin tones should be natural.

My TV has white balance settings and a color management system (CMS), how do I set them up correctly? Only through hardware calibration. It is useless to adjust these parameters “by eye”.

In the next article I will tell you how to do hardware calibration of a TV with a minimum of equipment costs.

Connect the power cord of the TV to the mains. Connect antenna or cable. Turn on the TV using the “Input” button on the remote control, aiming it at the screen. The TV comes with two remote controls: normal and Magic remote, in addition, you can connect a computer USB mouse. The easiest way to control your TV is with the Magic Remote. It looks like a mouse, but works in space, not on a surface. Settings management is simple, intuitive. The operating manual is available in electronic form on the TV screen. If the TV is turned on for the first time, the factory settings screen will be displayed. With partial or full TV set-up, the broadcast of the last active channel will turn on. To turn on the TV mode, you can press the “TV” button. Access to factory settings opens the “Options” item of the main menu.

adjust, brightness, screen

Follow the instructions on the screen to select your TV settings according to your preference. Where necessary, click “OK”. Specify the display language, “Home View”. as the setting for the best view mode, select the country of residence. The item “Autosearch” allows you to automatically scan channels and save available programs.

To automatically configure programs, press the “Menu” button. the main menu will open. Use the navigation buttons to navigate to Setup. Select “Run” to start automatic tuning. Scanning and saving of available programs will start. Upon completion of scanning, press “Exit” or return to the previous menu. “Back”.

To select “Antenna” in the settings, click in the main menu “Settings”. “Autosearch”. “Antenna”. To start automatic configuration, select “Run”, then end. “Exit”. The “Cable” mode differs in that in the “Settings”. “Autosearch” menu, select “Cable” and then “Other operators”. Use the navigation buttons to select Default, Full, or User. Make appropriate adjustments using numbers or navigation buttons (except in “Full” mode). Then. “Close”. “Execute”, scanning and saving of channels will begin, upon completion of the process. “Exit”.

When you select Cable mode, the selection of a cable service provider may differ from country to country depending on network conditions. It takes some time to search and tune channels, some channels may not be available. Follow the steps: “Settings”. “Autosearch”. “Cable” and enter additional values: frequency, speed. characters, network ID. For all of these parameters, contact your cable TV service provider. You can manually replenish the list of channels using the “Manual tuning”. “DTV” mode. go to the number of the desired channel, add programs.

Adjust additional parameters as needed. Setting the aspect ratio is performed using the “Ratio” menu, as well as using the quick and main menu. For best results, select the mode: “16: 9”. Fill the screen horizontally, “Original”. the image in the best quality without loss, “Normal”, “Full screen” and others.

Adjust the screen if you don’t like the factory settings. To change the picture mode, for its optimal setting, enter the main menu and select the “Picture mode” item in the “Picture” item. Use the navigation buttons to select one of the modes: Vivid, Standard, Cinema, etc. For the selected mode, select the parameters for the best image quality: “Brightness”, “Backlight”, “Contrast”. In RGB mode, adjust the parameters of the image output from the computer: main menu, “Display”.

Adjust the sound quality. To do this, select “Sound”. “Sound Mode” in the main menu. Set the desired sound quality using the modes: “Standard”, “Music”, “Cinema”, “Sports”, “Game”. For the selected sound mode, set the desired parameters: Treble, Bass, Surround X. The “Reset” function returns the settings to the factory settings.

A modern TV set may well replace a computer. It can be connected to the Internet via Wi-Fi, connected to a computer, used as a monitor, watching movies in various formats from external media, watching movies in 3D using the supplied set of stereo glasses, watching movies in digital quality (HD).

We continue the series of articles devoted to the correct setting of the image on your TV. Today we will look at the basic settings. Among them are brightness, contrast, chromaticity. These settings are not difficult to perform, and the picture quality of the TV is quite capable of improving. So let’s continue.

In Photoshop, you can now cut objects with one click

Photoshop CC has added a new feature that allows you to select objects in one click. The Adobe Sensei AI artificial intelligence platform is responsible for the capabilities of a tool called Select Subject. It is available in graphical editor version 19.1.

How to set up an LCD TV correctly

Vladimir Osadchiy, published November 14, 2014.

It’s no secret that the TV should not only show a picture, but also introduce as little distortion as possible into the original content. The content itself is always created with an eye to the standards and recommendations of the industry, and the main goal of any TV is to convey to you exactly the image that they wanted to show you.

Everything is important here: the skin tone of the actor, and the color of the sky at sunset, and which details of the image should be visible and which ones should be hidden. There are international standards that describe what the picture should be on your TV screen. Everyone has probably met the abbreviations PAL, NTSC, or HDTV, and these letters hide the properties of the video signal and various image parameters. With the advent of HDTV into our lives, most of the standards immediately became obsolete, and, in fact, the most relevant now is the REC709 standard, which is used in high-definition television (HD) and Blu-ray video.

READ  How to install wink on LG Smart TV

The only sure way to get the correct image on your TV screen is through hardware calibration. It consists in the fact that reference images are fed to the input of the TV, and measurements are taken from the screen. Next, the TV settings are adjusted until the picture parameters are as close as possible to those required by the standard. But this setting is quite laborious, it requires knowledge, and above all equipment. However, you can do this on your own, but for this you need to know what exactly and how to set it up. This is what we will talk about today.

First of all, you need to decide on the image mode. On the vast majority of TVs, the “Cinema / Cinema” mode is the most correct. Do not use the “Dynamic” mode for viewing, as due to the nonlinear gamma, the image in it is always incorrect, and due to the very high brightness, this mode strains your eyes, especially if you watch TV in dim lighting or in the dark.

Now let’s decide which color temperature mode to choose. The fact is that many TVs are closest to the standard color temperature (6500K), which is the “Warm” mode. If you have the option “Warm 1 / Warm 2” (more common on Samsung TVs), decide for yourself which one is better. Usually Warm 2 is more pleasing to the eye, but there may be exceptions. It is also necessary to disable all settings that adjust the brightness / contrast to the discretion of the TV. That is, you should disable such functions as “dynamic contrast”, “power saving mode”, “light sensor” and “dynamic backlight”.

Now let’s talk about contrast. In fact, it is incorrect to call this parameter “contrast”, since contrast is the ratio of the maximum brightness of the white field (white level) to the black level (the level of the minimum panel luminance). So, the “contrast” parameter in the TV menu changes exactly the white level, that is, the level of the maximum brightness of the image. It is not recommended to use the maximum values ​​for the “contrast” parameter, because some TVs have color temperature non-linearities when set to the maximum value. An excessively bright image (and the “contrast” / “backlight brightness” items are responsible for the real brightness on the TV) strains your eyesight and leads to eye fatigue, remember this when you adjust these parameters.

The brightness parameter determines the black level. To install it in the correct position, you can use the special “Pluge pattern” image. In this image, the leftmost vertical bar is black. To set the “brightness” parameter to the desired position, first increase it until you can clearly see all the stripes, and then decrease the “brightness” parameter until the leftmost vertical stripe merges with the background.

Sharpness is precisely the clarity of the image. This parameter is needed so that you get an equally clear image from different viewing distances. To adjust this parameter, you can use the special “Sharpness pattern” image (you can easily find it on the Internet). The method of setting the “clarity” is as follows: sit at a viewing distance from the TV; display “Sharpness pattern” on the TV screen. Then increase the “sharpness” parameter to the maximum, or to a value at which the artifacts of excessive “clarity” will be clearly visible: light halos around objects and thickening of thin lines, and then decrease the “sharpness” parameter until the image artifacts, such as light halos around objects and thickening of fine lines.

But it is quite difficult to set the correct color / saturation parameter without measurements. Usually, installers recommend displaying high-quality photographs of nature with many shades of green on the TV screen (since it is the eye that is most sensitive to it, and it is he who is overexposed on many TVs) and adjust the “color / saturation” parameter until the image looks as realistic as possible Additionally, you need to check the settings on high-quality photographs of people, skin tones should be natural.

Improved settings

Detailed settings are available on new LG TVs. What are they doing to increase the productivity of equipment:

  • through the settings go to the “Film” section (on some models it is called “Movie”). They include the option of artificial sharpness. the parameter will be set automatically, responding to the color gamut of the current scene, the level of lighting and other factors. To increase efficiency, go to the section “Dynamic circles” and slightly lower this parameter;
  • decrease brightness. As already mentioned, it is set too high by default. New TVs have an option “Automatic brightness adjustment”. and this is activated;
  • adjust the color temperature. If the color temperature is low, the screen is dominated by blue tones, high. red. The optimal value is considered to be 6500 Kelvin;
  • turn off dynamic contrast. The purpose of this option is to make the picture juicier. In fact, it will look unnatural. Better to manually adjust the contrast once and enjoy a detailed picture with crisp outlines and rich colors.

Brightness

This term is the balance of black in relation to the entire palette. To put it simply, the parameter determines the quality of displaying dark areas. On many TVs, including LG, the brightness is set extremely high, so most users are used to thinking that brighter is better. In fact, this is not the case. If the brightness is adjusted too high, blacks become gray, which reduces the clarity of the picture.

If you set it to a low brightness, dark pixels become more noticeable, but it is more difficult to distinguish between similar shades of black. This parameter must be adjusted in the room where the TV will stand. Also take into account the level of illumination. As a rule, TV is watched early in the morning or in the evening, after work, that is, at night. Therefore, the adjustment is carried out in low light conditions.

You can find the optimal brightness by eye. To do this, they turn on the film and, when there is a picture on the screen with textured black and shadows, they pause. Decreasing the brightness will make blacks more intense and shadows appear darker.

The optimal setting is when black is perceived as truly black and not gray (high value). Dark areas appear less detailed at low brightness.

How to adjust the picture on your LG TV?

Many people are wondering if they need to adjust the picture on the TV they just bought. The manufacturer of household appliances LG, despite the huge production volumes, debugs all the functions of the TV panels, and from the factory they, in principle, already show normally. But in order to achieve the optimal picture, a number of factors must be taken into account: the location of the TV, the size of the room, distance from the viewer, lighting. all this plays a role. The article will discuss how to customize the picture of LG TV “for yourself”. For the most part, the recommendations are relevant for TV of any manufacturer.

READ  Which button on the TV remote expands the screen

Basic settings

  • dynamic image change. This feature automatically adjusts the colors on the screen in response to lighting conditions. It is turned off, since the color format sometimes changes dramatically;
  • brightness. The parameter affects the enabled screen backlight, making it brighter. There is no exact meaning. each exhibits as he pleases;
  • contrast. White color rendition depends on this parameter. Adjust so that the shades differ from one another and white, light gray, black and light black tones are clearly distinguishable;
  • sharpness. This parameter adds details to the image. On newer TVs, the resolution is already high, so there is no need to adjust the sharpness.

It is recommended to check and correct the values ​​once a year, as the illumination of the equipment dims over time, which affects the display of the picture.

Adjusting the screen on the TV.

Contrast

This parameter is the opposite of brightness. It determines the level of white, how intense the light parts of the image will be. The purpose of the adjustment is to achieve a vivid picture in which individual details are clearly visible.

The easiest way to check the contrast is on scenes with clouds. it is set to maximum and gradually reduced until details are distinguished instead of white spots.

Many LCD monitors set the contrast level at 80. 90%. It is better to turn it down to 65% and dance from this mark. In the case of a plasma TV, it is recommended to set lower values ​​- in order to avoid burnout of the panel.

Adjusting the contrast on your TV.

Intensity

This term is called color saturation. One of the most common setup mistakes occurs when the user wants “as many colors as possible” and crank the intensity to the maximum. Yes, the picture is juicy, but unnatural, which will quickly tire your eyes.

This parameter is set to a medium value to make the screen display optimal colors. For easy adjustment, it is recommended to select a test pattern with relatively desaturated colors, such as natural landscape.

Basic image parameters

It takes a little time for the correct setting and the remote control, which has a “Menu” or “Settings” button. To adjust the main parameters go to the “Image” section.

LG TV picture features

Each released model has preset picture settings available through the menu. To switch between them, just press one button. The minimum number of modes is 3. 5, and each is designed for certain operating conditions.

The most common modes are: “standard”, “dynamic”, “soft”, “custom”, “cinema”, “sports”, “HDR” (the number depends on the novelty of the model). Presets affect parameters such as brightness, contrast, sharpness, and so on.

4K HDR TVs will automatically switch to HDR when the user is viewing content of appropriate quality. This aspect ratio is characterized by maximum brightness and contrast.

There are other modes that are useful under certain circumstances. For example, game console owners post “games.” A feature of the mode. the technologies responsible for image processing are turned off, which significantly increases the response (an important parameter, especially for first-person shooters).

Another interesting mode is “eco”, which aims to protect the environment. Nature is, of course, good, but it is better not to expose it. the brightness of the screen will decrease significantly, which may cause the picture to become unstable.

Picture Mode

Picture mode is a kind of TV preset that includes a specific combination of settings. Custom mode can be customized and optimized with the rest of the settings.

Vivid: This picture mode enhances contrast, brightness and sharpness.
Standard: In this mode, the LV TV settings are in the middle value.
Cinema: This mode provides the optimal picture for watching movies. It is especially useful in the evening when there is little light in the room.
Sports: Creates a great image for sports viewing as even the fastest movements are displayed in focus.
Games: All functions that slow down the TV are disabled. This reduces the output latency. Thus, we get the ideal mode for gaming.
HDR (Effect): Creates a dynamic image by enhancing the bright and dark areas of the scene. This is practically an artificially simulated HDR picture.
ISF Expert: this LG TV picture setting, unlike others, allows for completely independent adjustment, where the ambient light plays a major role.

ECO / APS: This is a power saving feature that changes all TV settings to reduce power consumption. The maximum screen brightness is adjusted to the desired intensity. on this in advanced settings.
Filmmaker Mode: Provides filmmaker quality as intended by the creators and certified by the UHD Alliance. Can switch automatically when relevant content arrives.

Image options

Settings Display Picture Mode Settings Picture options. In this menu, you can enable various image enhancement options.

Image options
Noise suppression Off (as needed also: “low”)
Having served. MPEG Noise. Off (as needed also: “low”)
Smooth gradation Low
Black level Low
Eye protection Off.
Real cinema On.
TruMotion Off or User
AI brightness Off.

TruMotion settings

Settings Display Picture Mode Settings TruMotion Picture Settings. Here you will find motion interpolation (smoothing) on ​​LG OLED TVs. De-Judder and De-Blur are usually set to 0. But you can make adjustments to De-Blur. You almost never need to use De-Judder when Real Cinema is enabled.

TruMotion
Configuring TruMotion User
De-Judder
De-Blur 0-10
OLED Motion / Motion Pro Off.

AI picture mode

AI image
AI image Off.
AI brightness Off.

Adjustments for HDR

Settings Display Advanced Settings HDMI Ultra HD Deep Color. If you are receiving HDR content from external sources such as a Blu-ray player or Xbox One, you need to enable the HDMI Ultra HD Deep Color input.

HDMI Ultra HD Deep Color
HDMI Ultra HD Deep Color 4K / 8K

All other settings for HDR material LG handles very well automatically. As a rule, no additional adjustments are needed here. If this is your first time viewing Dolby Vision content, you may need to adjust the screen mode (see above).

Screen mode settings

Settings Display Picture mode settings. Here are the basic settings. It is best to go according to the order in the table. The values ​​shown here are recommended. They can be adjusted to your taste.

Picture mode settings
Contrast 90
Brightness fifty
Definition
Chromaticity fifty
Shades
Color. temp-ra Warm 2
OLED brightness Adjusts the brightness of the TV. Good output value 80.
Backlight Adjusts the brightness of the TV. Good output value 100.