How to add music to imovie on iPhone

How to Add Music to iMovie on iPhone and Mac?

IMovie is specially designed for devices manufactured by Apple. Many users assume that the capabilities of this utility are limited to video editing, but with its help you can also edit the sound component of films. This article describes in detail how to work with music in iMovie (how to add audio, apply sound effects, or remove music altogether).

How to add music and audio in iMovie iOS (iPhone/iPad)

How to remove background music

To remove an audio track from the project, click on the background music field. it will be highlighted with a yellow frame. Next, you need to press the “Delete” key on the keyboard or select the “Edit” item on the top panel of the program, then. “Delete selected”.

If you want to unlink the audio track from the clip without removing it from the project, select the clip of interest on the timeline, click Edit, then select Detach Audio Panel. After that, the music can be added as background music for the entire movie or attached to another video clip.

To temporarily remove sound when working with a clip of interest, you need to call the inspector by clicking on it, then select the “Audio” icon

Add your own voice recording

iMovie does not only work with finished music: the user can record an audio track (for example, a voiceover) in the program itself. To insert such audio on Mac, you need to do the following:

  • Place the cursor on the timeline, select the place from which you want to start recording. Click the microphone icon under the viewport (next to it will be the inscription “Record overdubbing”).
  • The audio settings menu will appear. you will need to select the microphone for recording (the “Voice over options” item “input source”), adjust its signal level (“Voice over options”, drag the volume control up or down. For user convenience, next to the record button there is a sound level indicator, which at optimal volume remains in the green zone). To temporarily turn off other sounds, you need to click “Voiceover Options” and check the “Turn off sound in project”.
  • When everything is set up, you can start recording audio. to do this, you need to press the round red “Record” button under the clip. To pause recording, press the space bar on the keyboard or click the “Record” button again.
  • To complete the recording, you must click the “Finish” button.

The recorded audio appears in the timeline above the background music track. It will also be saved in the material library and can be used in other projects.

Important: the microphone recording will be attached to the clip on which the playhead was at the start of the recording.

How to add a transition effect

If several audio tracks were used when creating a movie, it is advisable to make fading when switching between them in order to avoid an abrupt change from one melody to another. The effect of a smooth increase and decrease in volume can be added through a special manipulator.

To do this, click on the track separated from the video clip, thus calling the inspector (displayed at the bottom of the screen). Next, find the “Audio” icon in the form of a loudspeaker, click on it, then on the “Smooth transition” item that appears. After that, two marks will appear on the clip, which can be positioned as you wish.

How to cut music

To shorten the length of the audio track, leaving only the necessary fragment, you can work through the “Action” menu, where in the “Audio settings” you must select “Trim clip”. 2 yellow brackets will appear to indicate the beginning and end of the fragment. To trim the file, select the “Divide” item. This method is used on devices with macOS.

In the application for mobile devices, everything is the same, only the selection is easier: just tap the screen twice, marking the boundaries of the fragment, and then slide your finger from top to bottom to cut the audio file.

Upload the video to the app

Tap the plus button and select Video. Specify the desired aspect ratio of the video and click OK. Videos from your Camera Roll will appear on the screen. select the one you need and click Start Editing.

Customize your music and sound

Adjust the volume of videos and added music using the sliders.

Using the Scissors tool, you can cut an audio track. If you want to cut the song at the end, scroll the audio track with your finger until the marker is where you want the song to end, and click Cut. Now, swipe down on the extra piece to remove it. To cut a song from the beginning, place a marker at the beginning of the song you want, click Cut, and then swipe the unwanted part down.

If you want to cut a section from the middle of a song, scroll through the audio track to place a marker at the beginning of the unwanted section and click Cut. Then place the marker at the end of the extra piece and click Cut again. Now swipe the unwanted section down.

To play a song from a specific point, touch and hold the audio track and drag it to the desired point in the video. When everything is ready, click Apply.

Add music to video

iPhone does not provide its owners with video editing capabilities with standard functions. Therefore, the only option to add music to the video is to download special applications from the App Store.

How to insert music into a video on iPhone

The iPhone has a built-in video editor, but its functionality is extremely poor: all it can do is crop video. By own means of the “apple” gadget, the video can be shortened to the duration acceptable in Instagram, but to add beautiful music, thereby giving the video a mood, you will have to use the programs from the AppStore.

READ  IPhone Lock Screen Video

How to add music via the dedicated iPhone app?

To add music, it is recommended to use a utility with a discreet name Video Toolbox, which can be downloaded here for free.

The Video Toolbox utility is a set of tools, thanks to which you can not only place a melody over the image, but also crop the video, apply various filters to it, start playback in reverse order.

Video Toolbox is very easy to use, intuitive and does not impose “space” requirements for the iPhone operating system. even on iOS 6, this program will work.

You should add music to video using Video Toolbox like this:

On the start page of the application, select the “Video Editor” section.

You will find yourself in a mobile video editor.

Just below the video playback window there is a menu with two options: “Album” and “Camera”. Choosing the second option, you can immediately shoot a video. the application will move you to the “Camera”. We will click on “Album”: in our case, the video for editing has already been created.

Find the desired video through the “Camera Roll”, mark it and click on the checkmark in the upper right corner.

Please note that the Video Toolbox watermark will be added to the video (in the upper left corner). You can remove the sign through the application settings by switching the “Display Watermark on Video” toggle switch to the inactive position, but you will have to pay 149 rubles for this.

Adding a watermark is not a unique disadvantage of Video Toolbox. almost all free video programs have such a “sin”.

Turn off your own movie sound. It is not necessary to do this, but if you leave the sound and overlay music on top, it can create an unpleasant contrast. To decrease the volume to the minimum, first click on the corresponding icon in the toolbar.

Then slide the volume slider to zero.

Now you can start directly adding music.

Click on the note icon.

You will see a menu where you can choose one of the 7 built-in melodies, depending on the mood, which, in your opinion, should transmit the video. In addition, the volume of the selected melody is adjusted in this menu.

After the choice is made, you need to click on the checkmark in the upper right corner. You will return to the editor window, where you can watch the video with the melody superimposed on top.

It remains to display the video from the program. to do this, click on the “Share” icon in the upper right corner.

Decide what video quality you want to get in the end.

For example, if you select the “High Quality” option, you will receive a video with a resolution of 640 x 480 pixels. Compared to HD, the resolution is quite low, but this is the best that Video Toolbox and the vast majority of similar ones are capable of.

music, imovie, iphone

After selecting the required quality, wait for the completion of the “Rendering” process.

At the end of the process, a message will appear notifying that the video with the superimposed melody has been successfully saved in the “Camera Roll” section of the “Photos” application. Click on “Done” if you want to quit using the Video Toolbox application.

If you prefer the “Goto My Videos” option, the application will redirect you to the section of the same name, from which you can upload the created video to YouTube and Dropbox or send it by email.

music, imovie, iphone

Go to the “Photos” application and check how well Video Toolbox did its job. In the section “Film” you will find the converted video.

Add music

Select Audio from the toolbar and click on the plus sign. At the top of the screen, select music from your iTunes library or free audio collection.

To preview the melody, click the Play button. To add music, tap the desired audio in the list and tap Select in the upper right corner of the screen.

How to split video and audio in iMovie?

  • Select a video clip with sound on the timeline.
  • Choose Modify Detach Audio Panel (or press Option-Shift-B). The audio component is separated from the video clip and displayed as an audio clip without the video component (with a green bar), attached below the video clip.

How to add any music track to iMovie on your iPhone

How to trim a song to ringtone on iPhone?

  • Open the website www.mp3cut.ru in the browser.
  • Select the file from which you want to make a ringtone
  • Select the required interval by moving the blue sliders.
  • If you want your track to start out of silence, gradually increasing the volume, then turn on the “soft start” function.
  • Choose format: iPhone ringtone.
  • Click “Crop”

How to Add Music to Videos from Apple Music?

  • Upload a video to the app Tap the plus button and select Video.
  • Add music
  • Customize your music and sound
  • To play a song from a specific point, touch and hold the audio track and drag it to the desired point in the video.
  • Save the result on your phone

How to Add Music to iMovie from Apple Music?

  • Select “Audio” above the browser.
  • In the sidebar, click the Music button. the sound effects button or the GarageBand button. The content of the selected item is displayed in the browser as a list.
  • In the browser, select the sound clip you want to add to the movie.
  • Perform one of the following actions.

How to add music to Aimuvi 2019?

  • With a project open, tap the Add Media button in the upper right corner, then tap Audio at the bottom of the media browser.
  • Tap “Soundtracks”.
  • Tap the soundtrack, then tap the add audio button.

How to add music to files on iPhone?

In order to “upload” music to the memory of an iOS device, you must first upload it to the aytyuns media library.

  • Launch iTunes (use the latest version).
  • Go to “File. Add to Library “and select the folder containing the downloaded audio files or a separate file.

How to add your own music to InShot?

Open the video in InShot. Click on the “Music” item. By clicking on “songs”, you can choose a song from the proposed ones. It is also possible to add your own songs.

How to add music to iMuvi on iPhone

IMovie is specially designed for devices manufactured by Apple. Many users assume that the capabilities of this utility are limited to video editing, but with its help you can also edit the sound component of films. This article describes in detail how to work with music in iMovie (how to add audio, apply sound effects, or remove music altogether).

As you can see from the article, iMovie provides enough options for editing audio tracks for movies. Due to the variety of effects, the program gives scope for creativity, and the simplicity of the interface allows a wide range of users to use the editor.

You can add any of the following types of background music to your movie project:

Soundtracks and music themes. IMovie comes with a collection of soundtracks natively that can dynamically adjust to suit the duration of your project. This includes iMovie theme music. It can be added to projects separately from themes. The theme music is used in the same way as the soundtrack, and also adjusts to the duration of your project. For more on themes, see Working with themes.

READ  How to free up space in icloud on iPhone

Music. You can add songs from the Music application synced to your device using the Music application on your computer.

Imported. You can add tunes created in GarageBand, Logic Pro X, or any other program and imported into iMovie using iCloud Drive or the Music app on your computer. (For information on how to import background music from iCloud Drive, see the “Add background music and other sounds from iCloud Drive” section below.)

Background music clips are highlighted in green in the timeline. When you add a melody less than 1 minute in length, it behaves the same as the sound effect and is highlighted in blue on the timeline. See Adding Sound Effects.

How to cut music

To shorten the length of the audio track, leaving only the necessary fragment, you can work through the “Action” menu, where in the “Audio settings” you must select “Trim clip”. 2 yellow brackets will appear to indicate the beginning and end of the fragment. To trim the file, select the “Divide” item. This method is used on devices with macOS.

In the application for mobile devices, everything is the same, only the selection is easier: just tap the screen twice, marking the boundaries of the fragment, and then slide your finger from top to bottom to cut the audio file.

Adding audio from the device memory on iOS

  • After downloading the audio recording, you need to go to the download list on the iPhone, click on the file.
  • A menu will appear where you need to select the “open in” item and select the “import to iMovie” icon.

Add audio from device memory on Mac

  • In an open project, find the “Window” item, then select “Music and Sound Effects” (or click the icon with the melody icon below).
  • A menu will open where you need to select the location of the file of interest.
  • A list of supported audio files will appear in the preview window. To open a specific file, you need to hold down it with the cursor and drag it to the project browser to the gray field to the right of the last clip (after background music).
  • When a green icon with a white plus appears on the audio file mark, you can release the cursor. The field will turn green, which means that background music has been successfully added. In this case, the audio will be played as long as the video sequence lasts.

If you need to add music to one specific clip, and not to the whole movie, the audio must be dragged to the area of ​​the video fragment of interest and released. At the same time, a green rectangle will appear under this clip.

How to add music to video on iPhone?

The iPhone has a built-in video editor, but its functionality is extremely poor: all it can do is crop video. By own means of the “apple” gadget, the video can be shortened to the duration acceptable in Instagram, but to add beautiful music, thereby giving the video a mood, you will have to use the programs from the AppStore.

Add music to your video for Instagram

Despite the fact that a video created in Add Music to Video can be uploaded to Instagram directly, the social network for photographers itself is unlikely to allow a video prepared with the help of this utility for publication. The fact is that Instagram has a requirement for the duration of videos. from 3 to 15 seconds. You can trim a video to the desired length in Add Music to Video, but it is very problematic to do this. you will have to spend a lot of time.

Another free utility, Clipper, will help you create videos for Instagram. You can download it here. Immediately, we note that Clipper places a watermark on the video, which costs 249 rubles to remove. The watermark, however, is barely noticeable and does not interfere too much.

To create a video for Instagram using Clipper, you need to do this:

Mark the desired video from those present in the “Camera Roll” and click on the checkmark in the upper right corner.

You will find yourself in the main window of the Clipper video editor.

Click on the video to go to the “Clip Editing” section.

In this section, you need to set the duration of the video and the area of ​​the image that will be visible in the final version of the video.

Clipper produces videos with only one resolution: 640 by 360 (width. height). If your video is taller than it is wide (that is, you were holding your iPhone upright while filming the video), you will have to crop it.

We are dealing with just such a video that needs to be cropped.

Resize the clip by pinching with two fingers anywhere in the timeline.

The default clip length is 3 seconds. You can increase up to 10 seconds. this is the limit.

Moving the frame up and down, set the area of ​​the image that will be visible on the final video.

The app will stretch the selected area to 640 x 360, so the image quality may drop.

Having decided on the duration of the video and the area of ​​the image, click on the check mark in the upper right corner. You will return to the main window of the video editor.

Choose a suitable background music for your video. Options include pop, folk, dubstep and other styles.

You can add music from your library to the video only after purchasing the full version of Clipper, which, as already mentioned, costs 249 rubles.

Music overlay. all that remains is to output the video from Clipper. Click on the “Share” icon in the upper right corner and select the “Save to Library” option.

How To Add Music To iMovie! (iPhone, iPad, iPod) (2020)

The process of exporting the video to the “Camera Roll” will start.

Unfortunately, you cannot upload the video directly to Instagram. you can only send it by mail or MMS.

Therefore, at the final stage, you have to find the converted video in the “Camera Roll” and post it on the social network for photographers through the “Share”.

How to add music via the dedicated iPhone app?

To add music, it is recommended to use a utility with a discreet name Video Toolbox, which can be downloaded here for free.

The Video Toolbox utility is a set of tools, thanks to which you can not only place a melody over the image, but also crop the video, apply various filters to it, start playback in reverse order.

Video Toolbox is very easy to use, intuitive and does not impose “space” requirements for the iPhone operating system. even on iOS 6, this program will work.

You should add music to video using Video Toolbox like this:

On the start page of the application, select the “Video Editor” section.

You will find yourself in a mobile video editor.

Just below the video playback window there is a menu with two options: “Album” and “Camera”. Choosing the second option, you can immediately shoot a video. the application will move you to the “Camera”. We will click on “Album”: in our case, the video for editing has already been created.

Find the desired video through the “Camera Roll”, mark it and click on the checkmark in the upper right corner.

READ  Customize Home Button on iPhone 7

Please note that the Video Toolbox watermark will be added to the video (in the upper left corner). You can remove the sign through the application settings by switching the “Display Watermark on Video” toggle switch to the inactive position, but you will have to pay 149 rubles for this.

Adding a watermark is not a unique disadvantage of Video Toolbox. almost all free video programs have such a “sin”.

Turn off your own movie sound. It is not necessary to do this, but if you leave the sound and overlay music on top, it can create an unpleasant contrast. To decrease the volume to the minimum, first click on the corresponding icon in the toolbar.

Then slide the volume slider to zero.

Now you can start directly adding music.

Click on the note icon.

You will see a menu where you can choose one of the 7 built-in melodies, depending on the mood, which, in your opinion, should transmit the video. In addition, the volume of the selected melody is adjusted in this menu.

After the choice is made, you need to click on the checkmark in the upper right corner. You will return to the editor window, where you can watch the video with the melody superimposed on top.

It remains to display the video from the program. to do this, click on the “Share” icon in the upper right corner.

Decide what video quality you want to get in the end.

For example, if you select the “High Quality” option, you will receive a video with a resolution of 640 x 480 pixels. Compared to HD, the resolution is quite low, but this is the best that Video Toolbox and the vast majority of similar ones are capable of.

After selecting the required quality, wait for the completion of the “Rendering” process.

At the end of the process, a message will appear notifying that the video with the superimposed melody has been successfully saved in the “Camera Roll” section of the “Photos” application. Click on “Done” if you want to quit using the Video Toolbox application.

If you prefer the “Goto My Videos” option, the application will redirect you to the section of the same name, from which you can upload the created video to YouTube and Dropbox or send it by email.

Go to the “Photos” application and check how well Video Toolbox did its job. In the section “Film” you will find the converted video.

How to add music from your own playlist to video on iPhone?

Using the Video Toolbox utility, you can overlay on the video not only primitive melodies of the application itself, but also musical compositions from the user’s playlist. To do this, at the stage of choosing a melody (step 5 of the previous instruction), click on the “iTunes Music” button.

Video Toolbox will take you to the “Music” application. find a suitable track in the playlist and add it to the list of tunes by clicking on “”. We will choose the song “Behind Blue Eyes” by Limp Bizkit.

Mark the selected song in the Video Toolbox ringtone list and click on the checkmark in the upper right corner.

The output of a video with a superimposed musical composition from the program is performed in exactly the same way as in the case of a video supplemented with one of the unpretentious Video Toolbox melodies.

No less convenient than Video Toolbox is another utility with a simple name, Add Music to Video, which you can download here. This program has a significant advantage over the others: when exporting, it does not add watermarks to videos. In addition, it is extremely simple and concise.

Music is superimposed using Add Music to Video like this:

On the welcome screen, click “Get Started”.

Click on the “Add Video” button with the “”.

On the next screen, press the red button with the same name.

Select a suitable video in the “Camera Roll” and click on “Choose”.

This will start the compression process (“Compressing Video”).

After the video is imported into the program, click on the big button “Next”.

On the next screen, you will see two options: “Music Store” and “Add Music”.

If you go to the Music Store, you can choose from five built-in tunes to overlay on your video. The melodies are so simple that they evoke memories of the MIDI songs that were present in old push-button telephones. To add music “to the mood”, it is much more appropriate to use Video Toolbox, because built-in melodies are one of the weak points of the Add Music To Video utility.

If you need to add a song from the iPhone playlist, click “Add Music”.

Find the music track you want to use in the playlist, and add it to the program through the “” button.

The utility will notify you that the audio has been loaded successfully. click “OK”.

Using the “Select the starting position” slider, you can choose where the song will play when the video starts.

Through the small “Play” button, you can turn on the song from the time at which the slider is set.

I must say that choosing a starting position is not an easy task. For example, it took about 15 minutes to “make” Limp Bizkit sing its ballad exactly from the chorus. The slider constantly moves out. adjusting it for people with thick fingers will become a real torment. However, other programs do not at all provide an opportunity to establish a starting position, so we will “be content with little”.

Once you have defined the playhead, click “Merge”. The video and audio merging process starts.

As soon as the process is completed, a message will appear on the screen stating that the video with the superimposed composition is saved in the “Photos” application. Click “OK”.

Through the “Preview” button you can preview the video and make sure that there are no watermarks on the image.

Above there is a “Share” button that allows you to upload a video to YouTube, Instagram, send it by mail or MMS message.

The disadvantage of Add Music to Video is poor optimization for the iPhone screen. the application buttons are superimposed on the network and battery indicators, which makes it seem as if the designers took their work “slipshod”. However, the utility performs the main functions perfectly, so small design mistakes can be forgiven.

For overlaying songs from the Music application, the Add Music to Video utility is more suitable than the Video Toolbox, because it does not require money for removing watermarks and has more flexible settings (in particular, it allows you to set the start point for audio playback). On the contrary, Video Toolbox is more appropriate if there is a need to add some music to the video “to suit the mood”. the built-in Add Music to Video melodies are quite primitive.

A simple Clipper utility will help you create videos for Instagram. This application produces videos that fully meet the requirements of the social network for the duration of videos.