Haier TV How To Connect Wi-Fi

Table of Contents

Using a Wi-Fi adapter

The USB adapter lets you connect to your network wirelessly, even if your device doesn’t have a wireless network card. After the USB adapter has been purchased, you will need to check if it automatically connects to the wireless network.

If the connection does not occur automatically, you should:

  • install the driver software on a personal computer. The adapter usually comes with an installation CD.
  • Load the CD into your computer and follow the instructions.

If your device does not have a CD drive, you must connect it to your router using an Ethernet cable.

Do not temporarily connect the wireless adapter to your computer.

Next, you need to follow the instructions on the screen. This will depend on the adapter used. During this process, you will be prompted to connect the adapter, select your own wireless network from the available ones, enter the password for the wireless network.

The adapter will then connect wirelessly to the internet router and any other appropriate devices on the network (e.g. Smart TV, game consoles, phone, etc.).

Check Wi-Fi support

The manufacturer places the Wi-Fi Alliance logo on the TV box if it has a Wi-Fi function. In the absence of such, you must pay attention to the technical passport of the purchase. The network section of the onscreen settings describes the steps for connecting via Wi-Fi. There will be a section on the onscreen Wi-Fi settings. You need to find the model number of your TV.

Using the WPS standard

The WPS protocol was created in order to SIMplify the process of configuring a wireless Wi-Fi network, therefore its original name was Wi-Fi SIMple Config. It significantly reduces the number of manual actions by users who do not understand the intricacies of customization. This protocol automatically specifies the network name and sets the encryption to protect the wireless Wi-Fi network from unauthorized access from outside.

In TP-Link routers, this function was formerly called QSS (Quick Security Setup) and performed SIMilar functions.

Connection and configuration

Many users are often interested in the question of how to connect the Internet to a Sony Bravia TV via Wi-Fi. You can connect your device to your TV without using a wireless router and then stream. photos and music stored on the device directly to the TV. To do this, you need to perform a number of sequential actions:

  • Press the HOME button ,
  • Select [Settings]. [Network]. [Wi-Fi Direct]. [Wi-Fi Direct Settings].
  • Select the TV name displayed on the TV screen using a Wi-Fi Direct device.
  • Use Wi-Fi Direct / Wi-Fi device to connect to TV.
  • Send Content from Wi-Fi Direct / Wi-Fi Device to TV.

Note! If you cannot make a connection, you must wait for the standby mode to be displayed on the screen, select the SSID / Password to show the network, follow the on-screen settings to complete the action.

To view the entire list of devices connected to the TV, do the following:

  • Click on the “Home” button.
  • Select Network Settings. Wi-Fi Direct.
  • Select Show Devices.

Connecting to WI-FI using a security key

The network security key is more commonly known as the Wi-Fi or wireless password. This is the password you can use to connect to the wireless network. Each access point or router comes with a pre-installed network security key that can be changed on the device’s settings page.

Most of the default keys are not easy to remember and are only entered once or twice a year. If you have a new router or access point, in most cases the preinstalled wireless key can be found on a sticker on the bottom or back of your device. Each manufacturer uses its own designation:

  • Password (key).
  • Wireless password.
  • WPA key.

It can be found next to the (wireless) network name.

Wired connection (LAN)

The wired connection provides a stable signal. In this way, you can enjoy streaming 4K high definition image data from network services such as YouTube.

To set up a wired connection, you must:

  • Connect an Ethernet cable from the router to the local area network (LAN) port on the back of the device. Wired or wireless LAN routers and modems are equipped with BRAVIA TV router function.
  • If your router does not have an open LAN port, you need a hub device to connect your BRAVIA TV to your modem. Check with your ISP or manufacturer if you are unsure of the specifications.

To adjust the settings of Android TV models, you must:

  • Press the HOME button on the remote control.
  • Select Settings.
  • Select Network in the Network and Accessories category.
  • Select Network Setting.
  • Select Easy.
  • Select Wired LAN and follow the onscreen instructions to complete the setup.

For TV models released in 2014 and earlier:

  • Press the HOME button on the remote control.
  • Select Settings.
  • Select Network.
  • Select Network Setting.
  • Select Set up network connection or Wired setting.
  • Select Easy or Auto and follow the onscreen instructions to complete the setup.

Connection diagnostics can be used depending on the TV model. If the TV cannot be connected to the Internet, you should try to diagnose the problem.

How to connect the Internet to a Sony TV via Wi-Fi

The use of wireless technologies to access the Internet space is currently not new. The Wi-Fi functions are currently inherent in the absolute majority of technical devices, and the issued passports solve a number of setup problems, in particular, how to connect Wi-Fi to a Sony TV. Why these questions are important, you can find out from the article.

Setting up Wi-Fi on an Android set-top box

To answer the question of how to set up Wi-Fi on a sony TV using a set-top box, you need to understand the Android box itself.

To set up Wi-Fi on an Android set-top box, you need:

  • Turn off the TV. It is recommended to turn off the TV when connecting or disconnecting devices.
  • Connect the HDMI cable to the HDMI port on the Android TV box. It can be found on the back of Android TV.
  • Connect the other end to an open HDMI port on your TV. It can be found on the back of the TV or on the side. Android TV requires HDMI port and HDTV.
  • Connect the power cable of the Android TV box. It will turn on automatically.
  • Insert batteries into the Android TV box remote control. The remote must come with batteries, but any two AAA batteries can be used.
  • Turn on the TV. Press the power button on the TV remote control or on the TV panel.
  • Press the INPUT or SOURCE button on the remote control. Marking will depend on the TV.
  • Select the input for your Android TV bo. You can switch between inputs until the welcome screen appears
  • Connect remote control (if prompted).
  • Sign in to your personal Google account. You will need to enter your own Google account information to complete the setup. Any purchases made on Android TV will be linked to this Google account.

If the remote pairing screen appears instead of the welcome screen, you will need to manually pair the remote:

  • Press and hold the Back and Home buttons on the remote control for five seconds.
  • Setting up Android TVBox is as follows:
  • It is necessary to select the language by using the navigation wheel in the center of the remote control to navigate the menu.

Note! Some devices have an automatic setup process when the device is first started. If the device does not have an automatic configuration process, you should select “Settings”, select “Language”.

  • Select a wireless network.
  • Enter the wireless password. Use remote and on-screen keyboard to enter wireless password, wait for Android TV window to refresh.
  • If the Android TV window is not automatically updated, you must enable the “Settings”. “About” menu.

Possible connection problems

Among other connection problems, the most common ones are distinguished:

  • Slow Internet connection;
  • The TV does not see the Wi-Fi network.

The main reason for the decrease in Internet speed is a technical problem with the provider. In bad weather conditions, connection failures may also occur.

The main reasons for the invisibility of Wi-Fi networks include driver errors, old computer models, errors in configuring the router.

When using Sony Bravia TVs, Wi-Fi setup can be done both wirelessly and using a cable. Existing connection problems can be resolved online or by contacting the provider.

How to connect Smart TV to laptop

To begin with, it should be noted that both devices must be connected to the same network. As a rule, routers are used at home, to which all devices are connected. But, if there is no router, then you can organize a network using a laptop or smartphone. So, we have a router and a home network to which both devices are connected.

Connect your Smart TV to Wi-Fi as indicated in the instructions. The laptop must also be connected to a router. Then a special application will help us to display content from a laptop on a TV screen. It is this that will connect the laptop to the TV via Wi-Fi. There are also two ways here:

  • Built-in Windows Media Center Extender.
  • Third party applications such as home media server.

The first option is a built-in feature in Windows 7 and 8. However, you still need to install it. In the seven it is done like this. Open the Start menu and type Windows Media Center in the search bar. From the search results, select the one you want and open it.

On Windows 8, running the tool is slightly different. Move the mouse cursor to the upper right corner and start the search in the menu that appears. Write down the name of the program and select the required program from the results. However, it is worth noting that in some cases this tool may not be present in operating system versions 8 and 8.1. If the search did not return any results, then it should be installed. If you are using licensed Windows 8, then this will not be a problem. Just go to the official Microsoft website and download the updates you want.

READ  How to connect a computer to a TV via wi-fi

Further, in both cases, the program setting is done identically. In the program menu, select “Media attachment”. Next, you will be taken to a menu called “Install Media Extender”.

Here, just follow the instructions on the screen. It should be noted that before proceeding with its installation, make sure that the TV and the computer are connected to the same network. Only then will you be able to connect your laptop to the TV via a wireless Wi-Fi connection. After installing and connecting the laptop to the TV, all you have to do is transfer the files to the set-top box, which will display them on the TV screen.

We connect the TV with Smart TV to the laptop :. How to connect a laptop to a TV via a Wi-Fi connection

Modern technologies are developing steadily. Smart TVs are already quite widespread today. However, not everyone had time to figure out how to connect a laptop to a TV via Wi-Fi.

Of course, this can also be done using the already familiar HDMI cable. Such an interface is required on every modern TV and computer model. However, sometimes this is extremely inconvenient, since not every user has a PC near the Smart TV, and a laptop is not always at hand. What’s more, the HDMI cable costs money. In addition, it restricts the user’s movement by forcing to place the PC in close proximity to the TV.

Connecting a laptop to a TV using third-party programs

Setting up these applications is extremely SIMple. There are a lot of programs for playing content on TV. However, several of them are in the greatest demand:

  • Home media server.
  • Samsung Share.
  • Share Manager.

The second app may not work properly with other brands of TV. But, if you have a Samsung TV, then the connection will go through without problems. The home media server works most stably and fits almost all TV models. Therefore, we will consider the principle of configuration using the example of the first application. You can download it completely free. over, connecting a laptop to a TV via a Wi-Fi network and setting up the program is extremely SIMple.

After installation, launch the program. First of all, you should assign the TV on which it will be displayed. photo or music. When you first start the program, a table will appear in which you need to select the type of device for playing content from the list.

This will be our TV, find the brand and the corresponding aspect ratio in the list. Click “Next”. At this stage, the program offers to share standard folders. But if you store in other directories, then you should specify them manually.

To do this, press the button with a big green plus. Now we just specify the folder with the necessary files. Click “Ok” and confirm the scanning of media resources.

After that, all the content that you launch in the program will be displayed on the TV. Now you know how to connect a laptop to a TV over a wireless Wi-Fi network using a home media server. The rest of the programs work on the same principle, so you shouldn’t have any difficulties.

I have extensive experience in setting up and connecting access control systems (ACS) and time attendance systems. And also I am engaged in setting up servers, computers, workplaces.
I work as an engineer at Technootkrytie.

Click here to learn how to connect an R-series TV

To connect to Wi-Fi, you need to know the network name and password. Can’t connect to any network the TV detects.

If you have your own network, but you do not know its name or password, contact your Internet provider.

Enter the TV menu: press the Home button and select Settings on the TV screen.

Select General.

Select Network.

Select Open Network Settings.

Select network type. Wireless.

Wait for the TV to find Wi-Fi networks and select your.

A keyboard will appear on the screen. Enter your network password and tap Done. To see what password you entered, check the Show box. password.

Wait for the TV to check the password and press OK.

Click here to learn how to connect an N, M, Q or LS series TV

To connect to Wi-Fi, you need to know the network name and password. Can’t connect to any network the TV detects.

If you have your own network, but you do not know its name or password, contact your Internet provider.

Enter the TV menu: press the Home button and select Settings on the TV screen.

Select General.

Select Network.

Select Open Network Settings.

Select Network Type. Wireless.

Wait for the TV to find Wi-Fi networks and select your.

A keyboard will appear on the screen. Enter your network password and tap Done. To see what password you entered, check the Show box. password.

Wait for the TV to check the password and press OK.

How to connect your Samsung TV to the Internet via Wi-Fi

Click here to learn how to connect your J-series TV

To connect model UE58J5200, buy Samsung WIS12 adapter. The adapter plugs into the USB port of the TV.

If you cannot find an adapter on sale or do not want to buy it, you can connect via cable.

To connect to Wi-Fi, you need to know the network name and password. Can’t connect to any network the TV detects.

If you have your own network, but you do not know its name or password, contact your Internet provider.

Enter the TV menu. Depending on the remote control model:
press the Menu button

Or press the Menu / 123 button and select Menu on the TV screen.

Select Network.

Select Network Settings.

Select Network Type. Wireless.

Wait for the TV to find Wi-Fi networks and select your.

A keyboard will appear on the screen. Enter your network password and tap Done. To see what password you entered, check the Show box. password.

Wait for the TV to check the password and click Close.

Click here to learn how to connect your E-series TV

To connect the series models: ES5557, ES5550, ES5507, ES5537, ES5530, ES5500, EH5307, EH5300, E557, E550, buy a Samsung WIS12 adapter. The adapter plugs into the USB port of the TV.

If you can’t find an adapter on sale or don’t want to buy it, you can connect via cable.

To connect to Wi-Fi, you need to know the network name and password. Can’t connect to any network the TV detects.

If you have your own network, but you do not know its name or password, contact your Internet provider.

Enter the TV menu. press the Menu button.

Select Network.

Select Network Settings.

The TV should detect the cable, press Start to connect.

Wait for the TV to find Wi-Fi networks, select yours, and click Next.

A keyboard will appear on the screen. Enter your network password and tap Done. To see what password you entered, check the Show box. password.

Wait for the TV to check the password and press OK.

Click here to learn how to connect your F-series TV

To connect F5300 series models, please purchase Samsung WIS12 adapter. The adapter plugs into the USB port of the TV.

If you cannot find an adapter on sale or do not want to buy it, you can connect via cable.

To connect to Wi-Fi, you must know the network name and password. Can’t connect to any network the TV detects.

If you have your own network, but you do not know its name or password, contact your Internet provider.

Enter the TV menu. Depending on the remote control model:
press the Menu button

Haier TV How To Connect Wi-Fi

or press the button and select Menu item on the TV screen.

Select Network.

Select Network Settings.

Select Network Type. Wireless.

Wait for the TV to find Wi-Fi networks and select your.

A keyboard will appear on the screen. Enter your network password and tap Done. To see what password you entered, check the Show box. password.

Wait for the TV to check the password and press OK.

Click here to learn how to connect your H series TV

To connect H5203 and H4203B series models, buy Samsung WIS12 adapter. The adapter plugs into the USB port of the TV.

If you can’t find an adapter on sale or don’t want to buy it, you can connect via cable.

To connect to Wi-Fi, you need to know the network name and password. Can’t connect to any network the TV detects.

If you have your own network, but you do not know its name or password, contact your Internet provider.

Enter the TV menu. Depending on the remote control model:
press the Menu button

or press the Keypad button and select Menu item on the TV screen.

Select Network.

Select Network Settings.

Select Network Type. Wireless.

Wait for the TV to find Wi-Fi networks and select your.

A keyboard will appear on the screen. Enter your network password and tap Done. To see what password you entered, check the Show box. password.

Wait for the TV to check the password and press OK.

What TVs can be connected to the Internet via Wi-Fi

If you need information about a specific model, please contact Support.

Setup via Windows Media Player

  • Start the player. To do this, click “Start”, so as not to scour the wilds of Windows, enter the name “Player” in the search bar. Run the application.
  • Look in the left window: “Music”, “” and “Image” and there are sections you need. I will show with an example. right-click on this section and select “Management of the current”.
  • Now you will see all the shared movie folders. by default. I, on the other hand, created a folder on the “D” drive in advance where films and series are stored. To add this folder, you need to click “Add” and select it.
  • Hooray! Now it has been added. But that’s not all. click on the “Stream” button and select “Advanced streaming options” from the drop-down menu. On the top ten and eight, the section will be called “Enable streaming media”. Will be located at the very bottom. you can’t go wrong.
  • Now let’s name the server name (The one that will be displayed on the TV), by default it is the computer name. And just below, select our TV, which should already be connected to the network. Opposite it, click the checkbox “Allowed” and click “Next”. Then again “Next”.
  • The computer will issue a password. It is better to write it down. as you will need it to connect your computer to the TV. It is not a fact that it will be requested, but it is better to write it down on a piece of paper or photograph it on your phone. Please note that there are both upper and lower case letters here. this is important.
  • We go to the TV, turn it on and look for any mention of DLNA and multimedia server in the settings. Once you’re there, you’ll see the name of your PC. Perhaps, when connecting, you will need a password, which I mentioned earlier.

This company has a licensed program with which you can safely configure the server on your computer.

  • Download and install the program from the office. site. https://www.LG.com/ru/support/smart-share.
  • After starting, go to the parameters and turn on the server if it was turned off;
  • Go to “My Shared Files”, click on the folder with the plus sign and select any folder with or photos.
  • After that, you will see all the movies in this folder.
READ  How to use Chromecast on Xiaomi TV

The program is very convenient. In this case, you can immediately connect to the TV. You can start movies directly from here.

Manual configuration for all models (Philips, Samsung, Xiaomi)

To get started, go to any drive and create a folder. For example “”, it will store all movies, amateur homemade. But in fact, it doesn’t matter, you can upload any media information there. You can also download movies from the Internet there.

  • Right click on this folder and select “Properties”;
  • Go to the “Access” tab and click “Share”;
  • There will be a small arrow next to the add button, click on it and select “All” (That is, all network users). And click “Add”. A new rule will be added at the bottom. Click “Share”.
  • Now you will see an icon that the folder is now networked. In order to check whether a folder has been added, you need to go to “Network” in the same window on the left. Then go to your computer and you will see our folder “”.
  • Click once on the network connection in the lower right corner and go to the control center.
  • Select the third item in the left column to change.
  • If you have Windows 10, you will also need to click on the arrow next to the “All networks” section. On Windows 7 and 8, you get to where you need to go.
  • View to have access to shared folders open on the network.
  • Scroll down to the bottom and disable password protection.
  • That’s it. now we go to our TV and turn it on. You need to go to the settings. Each TV company has its own name for the connection to the DLNA server (in our case, this is our computer and the “” folder):
  • LG. Smart Share;
  • Sony. Sony Bravia;
  • Samsung. AllShare.
  • But sometimes this section can be called directly as DLNA. As soon as you go there, you will see the name of your computer. We go there and see our folder with.

We kindly ask you to familiarize yourself with the formats supported by your TV in advance. You can find out about them in the documentation. You need to understand that Smart TV supports all formats. pictures and music. So, if you do not see some files or they are crossed out, this means that the TV set cannot read them.

The computer does not see the TV or vice versa

There are several steps to solve this problem:

  • Go to the network settings of the TV and check that it is connected to your home network;
  • Reboot your router and TV;
  • Repeat all the instructions above. you may have forgotten to do something;

How to connect a TV to a computer via Wi-Fi?

Recently I bought myself a large TV with a Smart TV system. And then the question immediately arose. how to connect your computer to the TV via home Wi-Fi. In antediluvian times, they used an HDMI wire. but this is wildly inconvenient. As it turned out later, there are a lot of ways and each has its own pros and cons. But I’ll highlight one. DLNA.

DLNA or in English Digital Living Network Alliance is a certain type of standards that help to stream multimedia files (photos, music) over a network between devices via a router. That is, you downloaded a movie, dropped it into a folder, shared it (made it visible on the network to other devices) and now you can watch this movie on TV. For this we need:

  • A router with a configured Wi-Fi network;
  • The TV and computer must be connected to this wireless network. If you do not know how to connect a TV set, you can read my article on this matter here. Everything is clearly stated there.
  • The wide screen must have a built-in Wi-Fi module. To check this, just go to the settings. Then go to the section related to the network and see if there are wireless network settings.

So. we have a wireless network and a connected computer and TV. Now there are three options for setting up a DLNA server:

  • Using the program;
  • Through the built-in player;
  • Manual setting.
  • Manual configuration for all models (Philips, Samsung, Xiaomi)
  • Setup via Windows Media Player
  • LG
  • The computer does not see the TV or vice versa
  • TV as a wireless monitor

TV as a wireless monitor

A year ago, all computers and laptops that had an Intel processor had Miracast or WiDi technology. It allowed you to display your computer screen on any TV over Wi-Fi. But the company completely stopped supporting this technology and removed the program from the official website. It is not yet clear why this happened. And not all TVs support this standard. But on old operating systems Windows 7 and on some eights, you can synchronize your computer and Smart TV. To broadcast your desktop you need:

  • Press the Windows button and P at the same time.
  • Don’t press anything on your computer yet. Turn on your TV and go to settings. Go to the network section and see if there is a Miracast or WiDi section. Or something SIMilar. Go to this application.
  • On the PC, select “Duplicate” or “Connect to a wireless display”.
  • We allow access on TV and enjoy the stream.

Samsung brand

  • Go to the TV menu, select “Support”.
  • Open the section “Firmware update”.
  • Select the “Update Now” tab.
  • The screen will start checking for new software.
  • If a new version is available, then you must click “Yes”.
  • The TV will start the firmware update procedure.
  • After the update, the device will reboot.

Why can’t I connect to the internet

The most common causes of problems are:

  • The network hardware configuration was incorrect.
  • The TV itself is incorrectly tuned.
  • The problem is not with technology, but with the Internet provider.
  • Software crash.
  • Problems with Smart Hub settings.

LG TV

  • Go to the official portal of LG.
  • Enter screen model name.
  • Open the “Support” section.
  • Then open the “Software” tab.
  • From the presented list of software, choose the newest.
  • Click on the link to start downloading the software to your personal computer.
  • Create a folder and give it a name, move the downloaded firmware file there
  • Copy to USB stick, and connect to TV.
  • Smart TV will ask you to complete the update procedure.
  • Confirm Action.
  • LG TV firmware update completed successfully.

Interference

Another factor that can cause problems with the Internet is interference from other devices. In order for the adapter to “Wi-Fi” without interference, it must be installed as far away from possible sources of interference as possible: air conditioner, microwave oven, telephone.

Connection instructions

Before finding out the main reasons why the TV does not connect to the Internet via Wi-Fi, the user needs to make sure that there was no mistake in setting up the equipment. Read also about TVs with Wi-Fi.

Internet connection diagram, via Wi-Fi:

  • Enable Wi-Fi adapter (connection must be active).
  • Go to the menu section.
  • Select “Network”, and then “Network Settings”, here you need to specify the type of connection (wireless).
  • In the list that appears, select the required signal and click “Next”.
  • Enter an individual password.
  • The operation to establish a connection will begin, then click “OK”.
  • The wireless network is working properly.

If the connection failed, then you need to consider other possible causes of the malfunction.

Updating the firmware

In order for the smart TV to function well, it is necessary to update the software on time. Below are the ways how to install the latest firmware on the most popular plasma brands.

Top Reasons Why TV Won’t Connect Wi-Fi

Why the Smart TV won’t connect to Wi-Fi is a question that worries many smart TV owners. Smart TV option allows you to use the screen not only to watch programs and movies, but also to access the Internet. The most popular way to connect to a network is wirelessly using Wi-Fi. This is one of the available options, since many companies produce panels already with a built-in module.

But it is not uncommon for a wireless connection to have a problem. the TV cannot connect to Wi-Fi. Such a malfunction can occur both at the stage of setting up the equipment, and after some time. The reasons why such a malfunction occurs are varied: perhaps the plasma does not see the router, or maybe the problem is in the wrong setting of the equipment.

How to reset network settings

On Samsung screens, this operation is performed according to the following instructions:

  • Plug in the plasma panel.
  • In the main menu, perform the following operation: press the info key, then the menu button, then the power key.
  • After this procedure, the television system will open access to the service menu.
  • Select the Option section, and then press Enter.
  • Go to Factory Reset.
  • Close menu and turn off TV.
  • Turn the screen back on, and re-configure the data (change name, pin code).

If the procedure for resetting the network settings did not bring success, then it is recommended to take two additional steps:

  • Change the DNS server value manually. Before performing the procedure, turn off the DHCP option on the router.
  • Then you need to perform the following sequence of actions: press Control Sub Option Mute Time, set the time to another channel 100 ms (automatic settings make the setting 600 ms).

How to troubleshoot

Each problem requires an individual approach, below is a list of the most common problems and how to fix them.

  • The screen does not see the device. options for eliminating this malfunction: turn off all equipment, and then turn it on; reset network settings and update software.
  • Another Wi-Fi network. go to the network settings section, and specify the correct data.
  • DHCP problems. turn off the monitor and then manually drive the network settings.
  • Malfunction of the TV panel. if there is a malfunction of the equipment, then you need to update the software.

How TV works with Wi-Fi

The well-known Wi-Fi technology allows you to connect to the Internet through specialized equipment wirelessly, which is very convenient for those who want to keep up with the times and not get tangled in wires. A TV with wireless technology is deservedly one of the most popular device options. Wi-Fi TV models are divided into two available categories.

  • The first includes options with a built-in Wi-Fi module, they are quite easy to use. Their configuration is carried out using the main router of a standard modem, but such models also have their drawbacks, and the main one is the too high price.
  • The second category includes TVs with Wi-Fi connectivity, which are equipped with a special USB port for installing a standard Wi-Fi adapter.

If the buyer for some reason did not purchase an adapter, he has to buy and build a Wi-Fi router that can be connected to the TV’s USB port and receive a signal from a home router. It is worth remembering that the capabilities of a standard TV with an Internet connection, equipped with Wi-Fi, will be noticeably more limited compared to a PC, however:

  • it can be used to access a limited list of sites, including social networks and special media services;
  • when you connect a webcam and a headset with a microphone to the TV, you can make calls using Skype;
  • thanks to Wi-Fi, everyone can watch their favorite movies directly on TV without having to copy them to a USB flash drive in advance.

TV connection from LG brand

Many LV TV owners want to figure out how to connect an LG TV to Wi-Fi and do it as quickly and easily as possible. This can be done in one of the two ways described above, depending on the type of TV, which may already have a built-in module, or you need to purchase a separate adapter from the manufacturer for it. When connecting, you must follow the step by step instructions.

  • First of all, you need to connect a Wi-Fi adapter to the TV thanks to the USB connector (if the TV is not supplemented with a built-in module.)
  • Next, you need to go to the settings for the network and select the “Wireless network settings” section, then select the OK button on the remote control.
  • On the screen, you will see three available methods for connection: this includes a setting for a list of all access points, which should be selected if you know the name of the home Wi-Fi network, as well as the password. The second way is a SIMple installation using the WPS button, it will work if the router supports this mode. The third method involves setting up a network, thanks to this type of connection, you are able to connect a TV to a laptop without the need to access the Internet.
READ  How To Connect Phone To Honor TV

With the connection of the TV to the Internet, thanks to the first method, usually there are no problems:

  • it is necessary to select the “Settings” tab from the list (AP), then in the proposed list of networks, click on the name of the desired network;
  • if the network is hidden, you will need to select the tab for entering a new SSID and enter a name for the network manually and a password, if necessary;
  • when the TV device fully identifies the settings, a message will appear on the screen about connecting to a new network.

Connecting a TV with Wi-Fi to the Internet

Every year modern TVs more and more amaze customers with an abundance of new interesting options, manufacturers are striving to release innovative models equipped with advanced functionality for sale. Many TVs are equipped with the Smart option and are an enlarged copy of a standard PC, only without a keyboard and mouse. For this reason, the TV is still one of the most important devices in almost every home. Connecting the Internet to a TV is no longer uncommon, and many users prefer to choose just such models. A separate category includes Wi-Fi TVs that instantly became popular after they hit the market.

Using laptop

Not all users who want to know how to connect Wi-Fi to a TV device have a router, for these cases there is another way to connect via a laptop. For this purpose, it will be necessary to carry out a SIMple procedure and create a direct form of communication between the TV and a laptop, which will be very important for those who want to play any content downloaded to a PC on the TV screen. If the laptop is additionally connected to the Internet, it will be possible to use it to access the Network from the TV.

First of all, you need to create an access point on your computer, this will not be so difficult, since the laptop already has a wireless module, just like a router. Since the computer’s firmware is always much more stable compared to third-party applications, this is definitely worth taking advantage of if you want to figure out how to connect your TV to Wi-Fi. To make your own group for connection, you must:

  • turn on the laptop and select command line from the menu.
  • in it you will need to write the code “netsh wlan set hostednetwork mode = allow ssid = My_virtual_Wi-Fi key = 12345678 keyUsage = persistent”, strictly following the sequence and order of characters;
  • after starting the command, the driver will automatically load to carry out the distribution;
  • the network is started through another command. netsh wlan start hostednetwork.

Available capable connections

Many owners of “smart” TVs want to know how to set up and connect Wi-Fi to a TV. In fact, it is not so difficult to do this. you just need to decide which method is most suitable for you. First, you need to create a home group of devices with Wi-Fi support, where the TV can then be connected. There are two common methods available for connection. a router and a laptop used as a home access point. To avoid problems with the Internet during work, your laptop or a configured router must be connected to the Network in advance.

Using a router

This procedure requires a TV with Wi-Fi function and a standard router that you usually use to connect to the Internet.

  • First of all, you need to connect the device to the Internet and then configure the router.
  • Next, you need to turn on the TV and enter the settings menu. On TV, you need to configure the connection separately by finding the “Network” option and choosing the type of wireless connection. All information enters the device automatically, since each embedded router is equipped with a DHCP option, that is, it is able to independently set the IP address for each device that is additionally connected to it.
  • The installation of wi-fi on the TV through the router does not end at this stage, since then the user needs to go to the menu and select the “Network Settings” item and follow the prompts presented on the display.
  • At the end, you can see a list of all available Wi-Fi connections, one of which you need to connect to, and it must be a router.

Modern routers and TVs are often supplemented with the WPS option. this allows you to minimize the settings to connect the router to the TV and greatly SIMplify the whole process for each user. In this case, the TV automatically starts searching for all available connections and establishes a connection automatically.

How to connect TV from Samsung

If you have a Samsung TV, you probably want to figure out how to connect it to a Wi-Fi network. This can also be done using a router or an existing adapter. During the connection process, you must follow the sequence of steps:

  • go to the TV-device menu using the remote control;
  • select the “Network” section and go to “Network Settings”;
  • in the window that appears with the text, you need to click on the Next button, then in the next window you will need to select the “Wireless connection” option;
  • after that you need to click on the “My network” button and enter your password, you may also need to enter the IP address provided by the provider.

In the event that the router already supports the WPN option, you need to select the desired item in the settings so that the configuration is carried out automatically. this is very convenient for those users who are setting up a connection of such a plan for the first time. You should not subscribe to updates if the menu prompts you to do so. The fact is that the signal will not be detected immediately at the moment when the instant download of updates starts, this can lead to a failure in the settings, and the user will have to enter them again.

Wi-Fi technology in next generation TVs

We live in a time when there is a TV in every home. Also, almost every modern family has the Internet and a Wi-Fi router. Thanks to this, the developers decided to combine these technologies, allowing you to connect the TV to the network to perform certain tasks on the Internet. So, the answer to the question of what is a TV with Wi-Fi is a TV that allows you to access the Internet, and for this you do not need a cable connection.

As a rule, such models are called Smart TV. This function immediately became widespread, since the Internet today is an integral part of people’s everyday life. And now, thanks to the combination of TV with the Internet, people have received a new set of opportunities that allow them to quickly solve their problems. In addition, do not forget that TV is primarily a means of spending leisure time. And by connecting it to the global network, we get even more services and entertainment opportunities.

So, what is a TV with a Wi-Fi adapter, we have disassembled. But, there are a lot of varieties of such TVs with Wi-Fi, and in order to know how to make the right choice in a given situation, you should understand how the technology works and how to use such TV.

How Smart TV works

It is worth noting that there are two types of Smart TV with Wi-Fi:

  • With built-in adapter.
  • With external wireless module. Smart TV box.

The first option is TVs with built-in Wi-Fi. The second is devices that only support Smart TV technology. However, it does not have a wireless module. It needs to be purchased separately and inserted into the USB port.

It should be noted that in order to avoid problems during operation, it is better to buy a TV with a built-in adapter.

How to use Smart TV

So how do you use a TV with a Wi-Fi adapter? First, remember that to connect TV to the Internet via Wi-Fi, we need a home network. As a rule, it is organized using a wireless router that is accessible to everyone. It acts as an access point, while if you connect it to the cable Internet, then all devices connected to the Wi-Fi will have access to the global network.

If you do not have a router and the ability to purchase one, then you can create a home network using a laptop. But, in any case, to access the Internet, it must be connected to the global network.

Let’s say the network is configured. Now you need to connect Smart TV to it. How to connect the TV to Wi-Fi is described in detail in the instructions included in the kit. But, if it is not there, then do not rush to get upset. Wi-Fi technology is easy to use. To connect your TV just turn it on. Enter the settings menu and go to the “Network” section. Next, go to network settings and click the “Start” button. This will start searching for available connections.

Next, a TV with a built-in Wi-Fi adapter will give you a list of available networks, from which you must select your router and click “Connect”. Enter the security password if required. As you can see, everything is extremely SIMple. Of course, the names of some sections may differ slightly due to different functionality and TV models, but the essence and principle of connection is always the same.

To do this, you just need to install a special application and connect your smartphone to the TV via a local network or directly, if both devices support the Direct Wi-Fi function. You can find TV control applications and install them for free on the Play Market. There are a lot of them and all have various additional functions. One of these programs is Smart TV Remote.

What is Wi-Fi :. Is Wi-Fi harmful ?:

I have over 10 years of experience in IT. I am engaged in design and adjustment of commissioning works. I also have extensive experience in building networks, system administration and working with access control systems and surveillance.
I work as a specialist in the Techno-Master company.