Failed to recover iPhone error 4013

Fix iOS

prompt: you need to log in before you can comment.
No account yet. Please click here to register.

failed, recover, iphone, error, 4013

How to fix iTunes error 9/4005/4013/4014 when restoring iPhone

Download the program and connect the device to the PC.
First, you have to install iOS System Recovery on your computer and run it. Then connect your iPhone with a USB cable.

The program will automatically identify your device. Then you can see many different interface options and click on “Fix iOS System” under “ Tools.” Then just click on “Run” Option to Continue.

Start uploading firmware
In this step, the program will help you install the latest iOS version on your iPhone and identify your phone model and type. Then click “Repair”.

To fix the iTunes error on your phone, you must install the firmware. It will take a while and you must wait patiently and not unplug or operate the device during the boot process.

Restoring iPhone System to Normal
After that, iOS System Recovery will automatically start the recovery process.

After you can see some words like “System fix done on the interface, then you can use and restore your iPhone without data loss.

Fix iTunes error

There is something wrong with my iPhone and I don’t know what to do now. Please, help! Now I can’t restore my phone! When I tried to restore my iPhone 7 via iTunes, it didn’t work, but the error message appeared: “Failed to restore iPhone / iPad. An unknown error has occurred (9/4005/4013/4014). ” I wonder if this problem can be solved? Please give me the easiest and most efficient way. Many thanks! “-David

It may not always run smoothly when you try to update or restore iPhone or iPad via iTunes but failed with error 9/4005/4013 / 4014. Your iPhone may freeze or disconnect, which means you cannot successfully restore iPhone / iPad. Usually your phone can have a lot of problems, such as getting stuck in the Apple logo or restarting automatically multiple times, etc. These problems can likely occur due to USB connection, computer operating system issues, iPhone system issues, or for the fact that a viral infection can also cause an error. Your iPhone? How to fix iTunes error and restore iOS devices successfully? Now in this article, we are going to tell you the best solution to get rid of iTunes error 9/4005/4013/4014 in two ways.

Fix iTunes 9/4005/4013/4014 Error with iTunesFix Tool

iTunesFix tool is generally recommended as the best way to fix iTunes problems, like fix iTunes 9/4005/4013/4014 iPhone Restore Error. It is an awesome tool to fix iTunes errors and problems without data loss, such as iTunes cannot connect, iTunes failed to install / update, iTunes iOS backup / restore problems, etc. What’s more, it can also clean up unneeded iTunes files selectively or all at once: cache, logs, cookies, junk, old iOS backups, software updates used, etc.; Completely remove iTunes on computer, including iTunes media (music, videos / movies, playlist), iOS backups, iTunes / iOS update files, other useless iTunes files, related components and user data. To summarize, it provides you with the easiest way to get iTunes back to normal.

Run the program on the computer
First, run iTunesFix on your computer, it will automatically detect your iTunes.

Select the latching mode
If there are no problems with iTunes and its components, you will be in the home interface of the program. Choose one of the repair modes. Here are “Fix iTunes Connect Problems”, “Fix iTunes Install / Update Problems”, “Restore Backup / Restore Errors”, “Fix Other iTunes Problems”; “Quick Clean”, “Deep Clean”, “Wipe Out” are available.

To fix iTunes error 2/13/56/1002/3194/4037 and other unknown errors, select “Fix other iTunes problems”.

Fix iTunes error and return it to normal
In the last step, click “Repair” to start the repair work. Please keep the Internet stable until the completion of the recovery process.

When the repairs are complete, click “Open iTunes” to launch iTunes and try again.

Updating iTunes

First of all, to fix error 4013, download the current version of iTunes from the manufacturer’s official website.

Next, we start the installation of the new version, select the “Update” item. The process will complete within a few minutes.

Important! When upgrading iTunes, Apple mobile devices must be disconnected from the program.

After updating, launch iTunes. We connect the smartphone and try to launch the OS update.

Recovery via DFU

The DFU (Device Firmware Update) feature enables iPhones to make changes to the operating system. Using the option, you can also start a factory restore.

To switch to this mode, you must do the following:

  • Update iTunes to the latest version.
  • Connect the communicator to a workstation via a USB cable, and then turn it off.
  • Press the “Lock” button, and hold it for three seconds. It is located on the right side of the iPhone.
  • After a three-second pause, press the volume down key. It is located on the left side of the smartphone.
  • Both keys remain in this state for ten seconds.
  • After the time has passed, release the “Lock” button, and “Volume” continue to hold for another five seconds.
  • If all steps are completed correctly, the device will display a black screen, and a message will appear on the workstation. It contains information that the mobile device is in DFU mode.
  • We follow the wizard’s prompts and activate the rollback to the factory settings.
  • If the mode is not activated, repeat the steps by pressing the side keys.
READ  How to View Deleted Messages on iPhone

Important! Activating DFU mode will delete all data from the smartphone.

Reinstall iTunes

ITunes sometimes does not work properly. You can try restarting your computer or uninstalling the software.

We open the “control panel”, section “Applications”. The window that opens will display a list of available applications on the computer. Find iTunes, click on the program and select “Delete”.

The process will take 3-5 minutes, after which we restart the computer. Download the current version from the official website.

We launch the distribution kit, follow the prompts of the installation wizard. After completing the installation of the PC, reboot.

Cooling the device

An unconventional way to restore performance is to cool down your mobile device.

The owner turns off the communicator, seals it in sealed cellophane, and then places it in the freezer of the refrigerator. Fifteen minutes later, we take out the device and try to start.

How to fix error 4013 when restoring iPhone or iPad

Error 4013 occurs when updating the iPhone operating system, usually accompanied by the text: “The connection between iTunes and mobile device is lost”.

One of the options for the error. the owner connected the iPhone with a cable to the workstation. Launched iTunes, chose an update. During the process, a rupture occurred, the smartphone rebooted and only the Apple logo is lit on the screen, or an error message.

The second variant of the appearance of the problem. the user was restoring the iPhone through iTunes, but the device was also disconnected. The screen will display a message as shown in the screenshot below.

iPhone X Error 4013 Fix.New method of fix 4013 on iPhone X.

How to fix error 4013 when restoring firmware are identical for iPhone 4, 5, 6 and all newer models.

Connecting to another USB connector

Connecting your smartphone to a different USB port may help. The user disconnects the iPhone from the computer. The cable through which the iPhone was connected to the workstation is connected to another connector. We connect the phone to the PC.

Using a different USB cable

Error 4013 when restoring an iPhone or iPad can sometimes be caused by problems with the cable that connects the computer and smartphone: bent over, accidentally crushed by furniture, or damaged by pets.

We take another cable and use it to connect the PC and iPhone. Launch iTunes, select update.

How to fix error 4013 when restoring iPhone

You can fix the bug on Apple on your own; this does not require special skills. The problem appears when trying to update iOS version or restore data after repair. Before taking the iPhone to the service and sinning on the manufacturer, you should make independent attempts to correct the situation. Depending on the method by which the firmware was updated, the solution will also be carried out in a similar way.

Device recovery through DFU mode

If the iPhone is not restored via iTunes “error 4013”, a fallback option will come to the rescue. DFU mode implies a complete rollback of the device, as well as the deletion of all existing information. How to start:

  • we connect the phone to the PC;
  • run the pre-updated iTunes program;
  • turn off the smartphone, but leave it connected to the program;
  • remove all tasks by swiping to the right;
  • hold down the “Power” key for a couple of seconds, then without releasing the button. “Home”;
  • release only “Power” and wait for the DFU mode window to appear;
  • in the program on the PC, select the option “Restore smartphone”;
  • start the process and, after completion, restore the information from the backup that was saved on iTunes.

What is iPhone Error 4013 (iTunes Error 4013)

Fixing iTunes Error 4013 Checking USB Port Connector

If the previous solution does not work, then it is very likely that the problem is hardware related. Thus, you should start by checking to make sure all of your USB ports and connectors are working perfectly. This is what you should do:

  • Make sure you are using the Apple USB port.
  • Use a different USB port.
  • Try connecting to another computer.

If you try all of these methods and nothing works, then the USB connection is fine and you should move on to the next solution.

READ  How to connect iPhone to TV for watching

Error 4013 when restoring iPhone 4S, 5S, SE, 6, 7, 8, X via iTunes: reasons and what to do?

Error 4013 when restoring iPhone 4s, 5s, SE, 6, 7, 8, X is direct evidence of mechanical damage to the gadget. Occurs on machines that have been repaired due to shock and moisture. In our article we will tell you about the problem and how to fix it.

Fix iPhone error 4013 or iTunes error 4013 by clearing up space

IPhone error 4013 occurs when updating iOS. Thus, the problem can arise. if there is not enough space on your iPhone. to post a new update. Thus. you have to make sure. that there is enough space, and if not, then clean it.

Try updating your device again

If the device was disconnected from the computer during the update or recovery process, or the computer was unable to start its recovery, one of the following messages may appear on the screen:.

  • Failed to restore iPhone [device name]. An unknown error has occurred (9).
  • Failed to restore iPhone [device name]. An unknown error has occurred (4005).
  • Failed to restore iPhone [device name]. An unknown error has occurred (4013).
  • Failed to restore iPhone [device name]. An unknown error has occurred (4014).

Try the following steps.

  • Make sure your Mac has the latest version of macOS or iTunes.
  • Force restart the device:
  • On iPad models with Face ID: Press and quickly release the Volume Up button. Press and quickly release the volume down button. Press the top button and hold until the device restarts.
  • IPhone 8 or later: Press and quickly release the Volume Up button. Press and quickly release the volume down button. Press and hold the side button until the Apple logo appears.
  • IPhone 7, iPhone 7 Plus, and iPod touch (7th generation): Press and hold the Top (or Side) and Volume Down buttons until the Apple logo appears.
  • IPad with Home button, iPhone 6s or earlier, and iPod touch (6th generation) or earlier: Press and hold the Side (or Top) button and the Home button until the Apple logo appears.
  • Connect your device to your computer with a USB cable. Find your device on your computer.
  • When prompted to perform a repair or update, click “Update” (not “Repair”) to reinstall the software while preserving your personal data.
  • Error 4013 when restoring iPhone

    Working with “apple” (and not only) smartphones, there is always a chance to face some kind of error. There is nothing terrible in this. over, many of them arise due to minor software failures. It is enough to eliminate them and that’s it. the malfunction is gone. This is exactly what the error code 4013 appears when updating or restoring an iPhone.

    Error 4013: How to Fix iPhone Error 4013

    You, too, have already managed to “get to know” her and do not know what to do? In this case, the information below will be extremely useful to you.

    How error 4013 manifests itself?

    Usually her appearance does not bode well. Although in certain cases, an error occurs after the gadget falls or moisture gets into it (and it is not necessary for the phone to fall into the water, it can be raindrops, snow, steam, condensation, wet hands, etc.).

    Often, users face this problem after the next iOS update is released. That is, when trying to upgrade, the iPhone shows a cord, and when restoring via iTunes, an unknown error message 4013 appears.

    It also happens that the “apple” device generally functioned without any problems, but suddenly rebooted and shows only the Apple logo. Then it reboots again and so on in a circle. In this case, in most cases, an error is accompanied by the appearance of a red screen.

    Why error 4013 occurs?

    There can be several reasons for the error. At the same time, it regularly appears on old 4s, 5 or 5s, and on “medium” models 6 and 7 versions. As a rule, outdated iTunes firmware is to blame. In this case, a simple and effective solution is to install the latest version of this program and try again to restore or update the device.

    It also happens that the computer software (software) is the cause of the error. As a result, a reboot of the system and device saves. Once upon a time, this also requires an OS update. Problems on the hardware side of the iPhone can also cause error 4013. These may be problems with connectors, microcircuits, etc. An unstable Internet network can also serve as the basis for this malfunction.

    In some cases, a damaged or non-original USB cable that is used to connect an iPhone to a PC contributes to the appearance of error 4013. At the same time, the USB port itself can “freak”, causing failures and not allowing the procedure for restoring or updating the gadget.

    READ  Where are iPhone backups on computer

    As you can see, there are many reasons why a message suddenly popped up on the screen warning that an unknown error 4013 has occurred. Therefore, to make it easier for you, we have prepared a whole algorithm of actions that should be followed to eliminate it.

    For reference! Please note that error 4013 during recovery can pop up on various devices with the iOS operating system. Including the latest iPhone models.

    Step-by-step guide: fix error 4013 on iPhone

    • We connect the iPhone to the computer using a USB cable;
    • We simultaneously hold down the keys “Home” and “Power” (count up to 10);
    • Release the Power button, but hold the Home button until the PC detects the iPhone in DFU mode;
    • In the iTunes program, select the task “Restore iPhone”;
    • Start recovery in DFU mode;
    • iPhone should reset error 4013 (all disappeared file data from it can be restored from iTunes backup).

    If the problem with the “hanging” error 4013 is still relevant and none of the above options helped you, then contact the service center. Most likely, the reason is a hardware breakdown and failure of some node on the smartphone.

    For reference! Some users claim that the cold helped them fix error 4013. And this is not a typo. They just put the iPhone in the freezer of the refrigerator for about 10-15 minutes (no more). Naturally, having previously hermetically packed the gadget and turned it off. According to them, after these manipulations, the error went away.

    How to fix error 4013 when restoring iPhone

    You can fix the bug on Apple on your own; this does not require special skills. The problem appears when trying to update iOS version or restore data after repair. Before taking the iPhone to the service and sinning on the manufacturer, you should make independent attempts to correct the situation. Depending on the method by which the firmware was updated, the solution will also be carried out in a similar way.

    Replacing the USB cable

    A USB cable is a wounded part of the package of any gadget. With active use, contacts are broken and data is not transferred correctly, and frequent disconnections can occur, which leads to errors. Replace accessories only with original ones.

    If you have any questions or complaints. let us know

    Device recovery through DFU mode

    If the iPhone is not restored via iTunes “error 4013“, a fallback option will come to the rescue. DFU mode implies a complete rollback of the device, as well as the deletion of all existing information. How to start:

    • we connect the phone to the PC;
    • run the pre-updated iTunes program;
    • turn off the smartphone, but leave it connected to the program;
    • remove all tasks by swiping to the right;
    • hold down the “Power” key for a couple of seconds, then without releasing the button. “Home”;
    • release only “Power” and wait for the DFU mode window to appear;
    • in the program on the PC, select the option “Restore smartphone”;
    • start the process and, after completion, restore the information from the backup that was saved on iTunes.

    Reinstall iTunes

    iTunes shows an unknown error 4013 when restoring the iPhone. which means you need to reinstall the program, after checking the official website for updates. How to reinstall:

    • we start the program, in the upper part we find the “Help” tab;
    • click on the “Updates” item and start the search process;
    • if there are updates, a window will be displayed;
    • press the update confirmation and start the process;
    • after completion, the program will restart on its own.

    You can also download the program from the official website.

    Causes

    Mechanical damage in models 4s, 5s, SE, 6, 7, 8, X may consist in poor contact between parts. The main causes of problems:

    • damage to the connection of the microcircuit responsible for the NAND memory;
    • receiving module of Wi-Fi signal;
    • camera module.

    Spare parts are responsible for the correct operation of the phone, and the slightest failure leads to bugs.

    OS update

    Besides the latest version of the application installed, the latest Windows must also be installed. When flashing the device on an old version of the computer, a conflict between running programs may occur, which will lead to an error.

    Error 4013 when restoring iPhone 4s, 5s, SE, 6, 7, 8, X: red screen and restart

    The iPhone could not be restored “error 4013” and a red screen and restart indicates a problem with contacts. One of the recovery methods is strong heating or cooling of the gadget for a period of 30-40 minutes. To carry out the work, you will need a professional soldering station and special skills.