Charging in progress but the phone is not charging iPhone

Reasons why iPhone won’t charge

You can charge your iPhone in normal use for a full day. If the battery is out of order, or there are other reasons for equipment breakdown, it is best to immediately contact a service center. often than not, iPhone won’t charge if you have the following problems:

  • IOS software failure, controller freezing, in which the battery stops receiving charging;
  • when updating the original iPhone firmware, a failure may occur, after which it takes much longer to charge the devices or the phone stops taking energy from the mains;
  • breakdown of the charger, connector, hidden cable breakage also lead to the inoperability of the smartphone after the battery has run out;
  • when using a computer as a power source, the malfunction may be related to the state of the USB port;
  • malfunctions of internal components of the iPhone, for example, battery, power cable, control board, are the reasons for the lack of charging of the phone.
charging, progress, phone, iphone

It is possible to independently find out and fix the problem only with simple defects, for example, when a cable or charger fails. In other cases, it is best to contact the service center.

Fix iPhone Not Charging When Plugged In – Works for iPhone XS MAX/XS/X/XR/8/7/6S/6/5S/5/5C/SE

iPhone won’t charge. what to do

For Apple technology owners, hardware health problems are rarely recorded. At the same time, it is impossible to completely eliminate situations when the iPhone is not charging. Qualified engineers with extensive experience and specialized equipment will be able to eliminate software and hardware errors on the device.

How to restore your iPhone to work

Apple products may only be diagnosed and repaired with specialized equipment and trained personnel. Experienced engineers look at the problem from different angles, are able to identify and eliminate any hidden defects. The main options for resolving issues with the lack of charging are:

  • when IOS software failures are detected, a hard reboot of the system is performed, after which the device’s operability is restored;
  • if a failure occurs during the firmware update, service center engineers can rollback and restore factory settings;
  • if the iPhone does not charge due to a malfunctioning charger, this problem is eliminated by replacing the unit, possibly along with the cable;
  • if a port malfunction is detected during diagnostics, first of all, it is cleaned and prevented, then only replacing the unit will help;
  • the most difficult repairs are required in case of defects in the internal elements of the iPhone, modern equipment and components are used to determine the causes and restore the equipment.

How to perform a hard reboot

The Apple Service Center wizard performs a hard reboot of the system (IPhone Hard Reset), after which the smartphone’s performance resumes.

If your iPhone has stopped charging with a working cable and power supply, contact the Apple service center. Each equipment owner can count on professional diagnostics and repair of a smartphone at an attractive price. The company’s engineers have extensive experience and knowledge, specializing in the repair of Apple equipment.

Replacement of faulty parts is carried out with original components, which ensures high quality of repair work. The iPhone does not charge or another breakdown has occurred. contact us, the service center engineers will eliminate any defect and return the gadget to work.!

Power supply failure

  • External factor. Shock, contact with water and more.
  • Using a non-original block. The situation is the same as with the cable (described above).

Contacting the service center

If your iPhone shows charging but won’t charge, then it’s best to seek professional help. This will be the most correct decision. Because only a specialist can diagnose the problem with high quality and safely, and then eliminate it. Timely contacting the service center will save time, effort, finances and, possibly, save the phone itself.
However, you can still try to fix the situation on your own. To do this, in the next section, we have described a number of solutions.

READ  Pair iPhone and watch

Dirty connector

Dust and debris gets into the charger slot during use. It accumulates there especially quickly if you carry the phone without a protective case in your. bag or backpack. Try not to leave your phone on dirty, especially fluffy surfaces. carpets, rugs, etc.
Important! iPhone may not charge if you charge it using a computer or tablet. In this case, there is simply not enough power. Try to charge your phone from a wall outlet.

Discharge

Fully discharge the phone so that it turns off by itself. Then try connecting the power. If there was a small software glitch, it can help.

Wiggle the cable

Connect the charger to your mobile phone and move the cable at the base closer to the port. If power appears and disappears, then the problem is most likely in a faulty connector. It can only be replaced at a service center. It is better not to fix this breakdown on your own, otherwise you can damage your smartphone even more.

Battery Replacement

Important! If you observe that the smartphone heats up frequently during charging, then this is the first signal that the software has malfunctioned. To avoid damage, it is best to contact an Apple Service Center. If before the iPhone stopped charging, there was a heating, then the matter is most likely in the software.

Get iPhone out of “full discharge”

If the iPhone runs out of power and refuses to turn on after that, you need to follow these steps:

  • Hold down the “Power” and “Home” buttons for at least 10 seconds.
  • Release keys when the Apple logo appears on the display.
  • Wait until the operating system is fully loaded.
  • Turn on and off silent mode if the smartphone has not booted.
  • Repeat the above steps until the result is achieved.

How to tell if your iPhone has stopped charging?

When iPhone is charging properly, a lightning bolt icon appears next to the battery icon in the status bar, and a large battery icon also appears on the lock screen. If, when the charging cable is connected, charging does not start, or visually charging is in progress, but the phone does not charge at the same time, these are signs of a problem.

Clean the power connector

Most iPhone users carry their devices in their s, so the charging port can get dirty or dusty, resulting in poor contact. iPhone may also not charge if threads and fluff interfere mechanically: the contacts simply do not reach each other.

You can use a regular toothpick to clean the connector by trying to get debris out of both corners of the hole. However, you must act very carefully so as not to damage the contacts.

Check charger

The second most common problem might be a cable or adapter malfunctioning when you try to charge your iPhone. To begin with, you should try another USB port and a different adapter, something of this could simply fail. The original iPhone adapter is a very durable accessory, but even it can break. To test the performance of the adapter, it is enough to take any other with a voltage of 5 volts and a current strength of 1 ampere and connect a smartphone to it.

READ  How to pull photos from icloud on iPhone

What to do if iPhone won’t charge but shows the opposite?

Although Apple’s technology is considered one of the most reliable on the market, it can still give users unpleasant surprises. One of the most common problems among iPhone enthusiasts is the loss of the device’s ability to replenish battery power. Let’s figure out why the iPhone won’t charge, and what to do about it.

Find out if there is a problem with iPhone components

The rarest reason iPhone won’t charge is due to a malfunction of the internal components of the device. For example, the power or charging controller may fail. If the problem lies in the microcircuit, the situation is solved quite simply: replacing the chip with a new one in the service center. Such a procedure will not cause any particular difficulties for good specialists and will cost about three thousand rubles.

The power controller can fail if you frequently connect the device to uncertified chargers (for example, car chargers or cheap analogs of the original cable). The bottom cable may also be responsible for charging problems. It can fail as a result of mechanical damage. In any case, only high-quality diagnostics will help to determine the problem with the internal components.

What to do if iPhone won’t charge?

The iPhone may not charge for completely different reasons: from cable malfunction and mechanical damage to software failure and malfunction of device components. Below is a step-by-step guide. what to do if the device has stopped charging.

Watch a video on what to do if your iPhone won’t charge:

Check if the battery is worn out

If all of the above methods don’t work, a possible reason the iPhone won’t charge could be battery wear. IPhone battery is warranted for a year. After the expiration of this period, the battery remains operational for several more years.

If the smartphone battery has served its purpose, only replacing the battery at a service center will help, depending on the model.

Charging in progress but the phone won’t charge Android: solution

Summing up, there are several ways to solve the problem with charging the device. If the above methods did not work, the best option would be to contact a service center for professional help.

Why the battery won’t charge on an Android phone

If the Android phone does not charge, what to do if it shows that charging is in progress, but in fact not, it is important to correctly diagnose the problem. It may be not only the battery, but also the controller. To determine such a problem, you need to send the phone for diagnostics. The wizard will measure the input voltage, check the power supply circuits and the communication with the battery. At home, system errors can be eliminated by resetting the settings to the factory settings, as well as flashing the device. You can check the type of errors in safe mode. If the device responds normally and takes charge, then the above methods will help.

In case of malfunctioning electronics or poor contact of electrical circuits, the operation of the device in safe mode will also be faulty. In this case, only professional repair can help with the replacement of faulty parts if necessary.

What you need to do for this:

  • Fully discharge the device until the charge becomes critical.
  • Connect your smartphone to the wall charger. Charge the battery to the maximum level.
  • Discharge the device to a minimum during the day.
  • Carry out a full charge.
  • Repeat the cycle of discharging. charging several times (usually three to five) in a row.
READ  Record video from iPhone phone screen

If you have any questions to the controller, namely: the wrong battery charge is indicated, the smartphone must be kept on charge for an extra hour or an hour and a half so that the level exactly coincides with the maximum value. If charging failures occur regularly, it is advisable to take the newly purchased device to a service center.

Android phone won’t charge up to 100 percent

Why won’t the phone charge, even though it shows Android charging? In such situations, it is necessary to calibrate the battery. This is done in order to increase its resource and service life. A similar algorithm is effective for new devices, but an already used gadget will also help a little “cheer up”.

Android phone won’t charge: power is on but power is not increasing

Problems with charging a smartphone can be called one of the most unpleasant. If the Android phone is not charging, the power is on, but the charge does not increase, the owner has many questions, and often such situations lead to inconvenience of use and the final discharge of the device. What to do in such cases, as well as the reasons for such problems, are discussed in our article.

Android phone won’t charge: what to do

The simplest and often correct solution is to check the battery. Most batteries last up to three years, after which the device starts to discharge frequently, and a full charge is not enough even for a day. In smartphones and tablets with removable batteries, a similar problem is solved by replacing it. Difficulties may arise in purchasing a new one, because the device is in fact already considered obsolete (even a year after purchase), so it is better to contact the service center of the device manufacturer. Non-removable batteries can also be replaced, but finding the right battery is much more difficult.

Another common problem is loosening of the charging socket. This factor is influenced by careless operation, the habit of charging the smartphone “on the go”, as well as the factory defect of the device. Replacing the connector does not take much time, but it is better to perform this procedure at a service center.

How to solve charging problems:

  • After purchase, calibrate the battery according to the proposed algorithm.
  • Replace the failed battery with a new one.
  • Check the power cord, if necessary replace with a suitable one.
  • Check the power socket, replace if necessary.
  • Do not use a USB cable from another model or as a charger.
  • Do not allow the device to permanently discharge less than 10%.

What to do if the phone does not charge and Android does not turn on, the main causes and methods of troubleshooting such malfunctions are discussed in our article. A similar situation can be encountered if the smartphone is already old enough, or the battery was not sufficiently calibrated at the beginning of use. The problem may be with the power cord or a loose charging socket. The information in our article will help you find out a possible malfunction and solve it at home.

If you have any questions. let us know Ask a question